Using MacBook Pro and Mac Mini

I've decided to add a Mac Mini to my house, rather than constantly running my MBP on power with a 2.5TB USB connected, serving my 3 Apple TVs.
The idea will be to run the Mac Mini headless, running iTunes, with my USB drive connected, always available to the Apple TVs, leaving my MBP "portable" again.  Winner!
I just wondered how every else with this setup manages things like iTunes, syncing iPhones/iPads, etc.  Obviously all my movies, TV shows, etc will be on the Mac Mini, so they be available to Apple TVs all the time, but I do like to sync some TV shows to my iPad for watching.
Is it best to simply sync my iPad/iPhone to the Mac Mini (bit of a pain as it'll be hidden down low on a shelf), or keep 2 copies of iTunes Library?

You should be able to per these instructions:
http://support.apple.com/kb/PH10725
Ciao.

Similar Messages

  • Connectivity Issue Between MacBook Pro and Mac Mini

    I have a MacBook Pro and a Mac Mini both with Yosemite 10.10.2, I've never had any issues with them sharing a connection when I was home, (I've never been able to connect outside of my home network) but I use the Mini to backup my MacBook Pro, but has of February 11th my MacBook Pro doesn't see my Mac Mini no matter what I do. I can share the screen from the Mini to the Book Pro but I can't remotely access the Mini from the MacBook Pro. I've turned off Back to My Mac on both Macs and removed it from my Airport Extreme and re-entered all of the information. I signed out of iCloud on both Macs and signed back in. I haven't changed any settings at all before I lost the connection, I am not sure how to resolve this issue.

    Hey there GRivera210,
    It sounds like you are having issues with using Back to my Mac. I would recommend using the troubleshooting outlined in the following article to help resolve the issue. It also has a contact for the iCloud support team if it doesnt resolve it:
    If you have issues using Back to My Mac
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Can I migrate info between Macbook Pro and Mac mini using a thunderbolt connection?

    I want to migrate information from my Macbook Pro to my MacMini but the Macbook Pro doesn't see/recognise the MacMini. The MacMini sees the Macbook Pro.
    The MacMini is using OS X Yosemite version 10.10.1
    The Macbook Pro is using OS X version 10.9.5
    I have connected a thunderbolt lead between the two devices but this hasn't changed the problem.

    You should be able to per these instructions:
    http://support.apple.com/kb/PH10725
    Ciao.

  • How do I backup my MacBook Pro and Mac Mini to 1TB Time Capsule

    I cannot backup my MacBook Pro (osx 10.8.2) on Time Capsule using Time Machine. The following Time Machine error message appears: The backup disk image “/Volumes/Data-1/BARBARA’s MacBook Pro.sparsebundle” is already in use. There is no problem when I use Time Machine to backup Mac Mini (osx 10.6) on same 1TB Time Capsule.

    See > http://pondini.org/TM/C12.html Do it on the Mac that shows that error message

  • Created three new users without Apple IDs and they can't log into either of my Macbook Pro or Mac Mini running Mountain Lion.

    I have created three new users without Apple IDs and they can't log into either of my Macbook Pro or Mac Mini running Mountain Lion.  These accounts are for my kids and originally were setup with parental controls and time constraints.  Thinking this was the problem I removed the time constraints, removed the parental controls, deleted and re-added them, and made them standard users.  I have reinstalled, used disk utility to repair permissions, and made them admins.   Any help is appreciated.

    Users don't need Apple ID's. That's not the issue. Have you tried repairing permissions their accounts?
    http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/
    Repairing User Permissions in OS X Lion
    You’ll need to reboot to perform this, and then use the same resetpassword utility that is used to change passwords in Lion, but instead choosing a hidden option.
    When you use the Disk Utility app and Repair Permissions — it doesn’t actually repair the permission settings on folders and files in your Home folder where your documents and personal applications reside.
    In Lion, there is an additional Repair Permissions application utility hidden away. This tool is located inside boot Repair Utilities. Here’s how to access it.
    Restart Lion and hold down the Command and R keys.    You will boot into the Repair Utilities screen. On top, in the Menu Bar click the Utilities item then select Terminal.
    In the Terminal window, type resetpassword and hit Return.
    The Password reset utility launches, but you’re not going to reset the password. Instead, click on the icon for your Mac’s hard drive at the top. From the drop-down below it, select the user account where you are having issues.
    At the bottom of the window, you’ll see an area labeled ‘Reset Home Directory Permissions and ACLs’. Click the Reset button there.
    The reset process takes a couple of minutes. When it’s done, quit the programs you’ve opened and restart your Mac. Notice that ‘Spotlight’ starts re-indexing immediately.

  • About a year ago we purchased a used macbook pro and can not get music to transfer from iPhones to mac

    about a year ago we purchased a used macbook pro and can not get music to transfer from iPhones to mac

    how can i get All music transferred? even non purchased

  • I bought a barely used MacBook Pro and I have an old MacBook...

    I bought a barely used MacBook pro and I have an old MacBook. Is there a way to make the MacBook Pro as a new out of the box computer, so I can send all my data to the "new" computer?

    The Migration Assistant doesn't erase anything - it migrates or transfers data from one Mac to another, but it is a good idea to update your Mac's backup you will be migrating or transferring the data to before doing so to be on the safe side.

  • I purchased a used macbook pro and want to set it back to original factory settings

    I purchased a used macbook pro and want to set it back to original setting

    What to do before selling or giving away your Mac
    Clean Install of Snow Leopard
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • HT201376 just got a used macbook pro and want to restore to facory settings how do i do is

    I just got a used macbook pro and want to restore to factory settings....how do i do this safely?

    Click here and follow the instructions. If the computer originally shipped with Mac OS X 10.6.8 or earlier, when you reach step 5, insert its original disk, restart with the C or Option key held down, use the Disk Utility to erase the internal drive, and install a fresh OS.
    (118569)

  • MacBook Pro and Mac Air - "external monitor"

    Is it possible to connect MacBook Pro and Mac Air and use one as an "external monitor"? And if so, which cable would I need?

    Hi Hello1852,
    Thank you for using Apple Support Communities.
    To use another Mac as a secondary display with your Mac, it will need to be an iMac, not a portable Mac.  To learn more about using another Mac as a secondary display, take a look at the article below.
    Target Display Mode: Frequently Asked Questions (FAQ)
    Cheers,
    Alex H.

  • Macbook Pro to Mac Mini data sharing, sync, and/or time machine backup?

    I currently have a MacBook Pro and am about to buy a Mac Mini. I do a good deal of multitasking on the MBP I and would like to use the Mac Mini as the "home base" of my dealings and my MBP as an extension of it, the way it should be. In short, I will have a desk for the new Mini but I don't really intend on ever being physically at it. Rather, I will be on my MBP or remoting in to it from a PC. At any rate, as an example, is it possible / what would be the best solution for being able to work on my iWeb site via my MBP if it's housed and stored on my Mac Mini?
    Secondly, since I will now have 2 mac machines, there is a data question at hand. Specifically, is there a good way to sync all information and settings bewteen two macs running Snow Leopard? If so, what/how, if not, what would be the best option for accomplishing this type of goal?
    Lastly, since I will now have 2 mac machines, how should I handle the time machine backups? I have a 2tb ext hard drive serving as a time machine backup for my MBP right now but how would I go about doing the same for the Mini? Should I / can I use the same drive for the mini or does it have to be a seperate time machine backup?
    (For the record, I do have an additional 2tb ext hard drive that I would be happy to use as a sync point for all of this data if needed should it be possible to "share" data, apps, etc between the 2 machines. I would be able to broadcast it wirelessly via a device called pogoplug.)
    I feel like there is a better and more efficient way to integrate what it is that I'm trying to do here. Any thoughts on the matter?

    There are numerous solutions to sync information on two or more Macs. Try doing a google search for "Mac sync" or something along those lines.
    As for Time Machine backups, you could connect an external disk drive to your Mac mini and use it as a Time Machine disk for the Mac mini and if you share it out, you can probably also use it to do Time Machine backups of your laptop, but I personally have not tested that yet so I cannot say with certainty that the sharing part will work.

  • Can't Get MacBook Pro and Mac Pro to Network

    I have a MacBook Pro (2008 - 2.5 Ghz. Core 2 Duo with 4 Gb of RAM running OS X 10.6.7) that I have been connecting to my Mac Pro (2005 - 2 2.66 Ghz Xeon with 20 Gb of RAM running OS X 10.6.7) through an Ethernet switch on my school's network. This has worked without a hitch for years, but when I upgraded to 10.6.7 recently, the MacBook and Mac Pro fail to network. On the MacBook Pro, the Mac Pro's icon doesn't show in the shared area, and on the Mac Pro, I can see the icon for the MacBook Pro, but when I click on the icon to connect, I get the message that "Connection Failed There was an error connecting to the server (name of my MacBook Pro). Check the server name or IP address, and then try again." I have tried a direct connect using the "Connect to Server" under the Go menu on both machines, using their IP addresses, but no luck. Is there something I need to re-set to get these two to talk again? I have other Macs on the same network that my MacBook and my Mac Pro can see, and both machines can connect to them. They just can't connect to each other.
    Thanks in advance for any ideas you might have on  how to fix this.

    I fixed the problem by re-setting the default values for my VirusBarrier X6 anti-virus program.

  • Unable to share iTunes from macbook pro to mac mini

    I have a Macbook Pro  and a Mac Mini both running 10.6.8. They are connected wirelessly and I can open the Macbook Pro from the Mac Mini. However I cannot share the iTunes from the Macbook Pro to the Mac Mini. No Shared item comes up in the Library list. Any solutions?

    make sure this checkbox in preferences > general is ticked.
    also see Troubleshooting Home Sharing

  • I bought a used MacBook Pro and didn't come with an install disc.

    I recently purchased a used MacBook Pro, it is the 2006 15.4inch, with 1.83GHz Intel core duo processor. It didn't come with RAM, a charger or the instal disc and the battery was dead. I installed RAM, bought a battery and charger and it booted up no problem, but I can't get past the login because I don't know the previous owners password. How do I get passed this point so? What OSX do I buy?

    In the mean time try this: Run Mac Setup Assistant -
    Restart the machine with the Command and S keys held down, and type the following commands into the prompt in order:
    mount -uw /
    mv /var/db/netinfo/local.nidb /var/db/netinfo/local.nidb.old
    mv /var/db/.AppleSetupDone /var/db/.AppleSetupDone.old
    usr/libexec/create_nidb
    shutdown -h now
    The Setup Assistant will reappear the next time your computer is turned on. Be sure to enter the commands properly. You will be able to setup your user name password, etc. You can then delete the previous owners User.

  • Wh does the internet connection keep dropping on my macbook pro and mac pro

    I have a Mac pro, Macbook Pro and iphone. All have problems with the internet connection especially after any short period of in activity. My mac Pro is connected directly with an ethernet cable and the mac pro wireless. I have to go through system preferences network setup all the time to reconect. Soemtimes whn on email choosing take all accounts online does cause a reconnect but only after a minute or so wait.

    Done that.. many times... also did a lot of suggestions from other posts.. removing pls files etc.. nothing works and it seems to be something experienced by other.. mysstery is it happens on all 5 computers in the office.. my isp has no suggestions... the pro can loose connection and the macbook wifi is OK and the phone usually works OK but leave my Macpro for 5 minutes and `I need to reconnct using system preferneces...

Maybe you are looking for

  • Error while invoking PL/SQL API from DB Adapter

    Hi everybody. We have a plenty of processes, which invokes PL/SQL API using DB Adapters. Everything goes ok, but sometimes API invocations results with error like this: <bindingFault> <part name="code" > <code>902</code> </part> <part name="summary"

  • Strange system pause while using OS X on Mac mini

    My Mac mini has always had a funny little problem. As you are working along, choosing menu commands and pressing buttons, the mini will make a sound like a sigh and stop responding for maybe a second or two. Then all is well and you're back to normal

  • First Time installation of Flipshare software-unable to run without an error message.

    Got a Flip video camera for christmas.  No battery life out of the box.  When I plugged it in to the USB port it loaded the software so it appears in my applications folder but will not run a set up without an error message.

  • Problem in SE80 - Objects are not showing up

    Hi, Let say example zrad package has function groups and reports but those function group and reports not showing in se80 transation. If i enter the package name only the package name alone showing. Thanks & Regards, Gowri Sankar

  • ABAP client Proxy authentication required

    Hallo, my problem is about ABAP client Proxy authentication. Scenario: Our Dev. BW MWDCLNT600 queries “forward” a (RetailPro) database (JDBC Receiver C.Channel), by Dev. XI , in order to "drive" data extraction (realized, backward, from RetailPro to