Using MainStage live in a special way

Hi,
I have the new Logic Studio. I wanted to find out if I can use MS the same way I do with Live 7, as being a Logic man, that would be my preference.
Here are some things that I want to be able to do:
1) If someone comes up to me during a performance, can I go to a special vamp section, that I put together in each song?
2) If the crowd is dancing more than usual, I want to be able to add as many choruses or instrumentals as I want to the song by using a midi controller from either my Roland X7 or some other controller?
Any and all help or opinions more than appreciated and welcome.
Thanks,
StashO
iMac 3.06 4 gig, G5 quad 16 gig, PC Intel quad 8 gig, Euphonix MC mix and control, DP6.0, Logic 9 Studio, Live 7, Sibelius 6, Garritan Personal & Jazz, Komplete 5, Melodyne, BFD 2, Waves Platinum,2X 896 mk3, Unitor8, Roland Fantom X7

Good idea! I'll give that a try. One unintended (but handy) consequence of my current set-up is, that since I'm coming out of the Headphone output, I have yet another Gain control. When plugging into different amps it allows me to boost or cut the overall output in a simple analog fashion as required.
I'm using a small dot of "white-out" to mark the preferred points for the two different amps I switch between. Kind of an easy way to achieve some kind of "unity volume". My Classic 30 is scary loud, but the old Fender Frontman at church is kinda lame in comparison. It's not a major thing and I may be willing to sacrifice it after I try your suggestion.
Thanks for the reply, and let's tell our friends about the forums. There's lot of people starting to use MS, and this stuff is all good.
Much Mahalo and positive waves,
Brian

Similar Messages

  • Any guitarists using Mainstage/Guitar Amp Pro in live situations??

    I'm getting ready to purchase Logic Studio(as soon as my pc sells), and I was wondering if anyone is using Mainstage as a guitar rig for live situations. Is Guitar Amp Pro "tweakable" enough to get good results out of? I'd love to have GuitarRig3, but, that won't be in the budget for a while. Any thoughts?

    I've been using it with an acoustic bass. It's a little different from your situation but I can say that it's pretty fun. having all these sounds on command is a blast.
    That said using a computer for some effects is one thing, using it to get a nice tube like distorted and/or warm sound is another. Unless you want to spend a few grand on a serious converter and preamp you probably won't be really matching a real analog sound in the real world flesh-space. The converter/interface and how you preamp it into the converter will make a huge difference in the sound. A lot of cheaper effect pedals are already using digital converters (bad ones) so if this is your baseline you could do much better with Mainstage easily. If you are trying to replace an 'all analog guitar straight into a tube amp' kind of sound you probably won't get it.
    I've been using NI GuitarRig some, mostly because I had it before. The Mainstage guitar amps seem a little simple tweeking-wise, but that's just a brief impression on my part.
    I use the laptop on an effects loop as an effects processor, and not to achieve my basic sound. The hardware you use around Mainstage can limit the quality of your final sound, so if you are on a budget don't expect to get the ultimate guitar sound by plugging straight into the laptop, or even by using one of the cheaper consumer interfaces.
    I've been using an RME expresscard interface - which seems to degrade the sound a little- and I'm trying to replace that and the preamp with a Duet, mostly for size/weight considerations (you just cannot get these types of things for backline, so I gotta bring it with me).
    Jump in and start working it out, have as much fun as you can. Maybe use it with your guitar amp as an effects unit. If you run it through the house and monitors at a venue you will get wildly varying results. If it's a critical mission have a way to bypass the computer or have a backup rig/sound handy... It's still a computer and they do weird things. Don't be browsing around the interwebs for pr0n or anything like that on the computer you expect to work for your live rig. Turn off as much network activity as you can. Turn off background apps. Keep the amount of audio and midi programs you install to a minimum. Keep backups. Go nuts.
    -RB

  • How can I remove an account and apps from another user from my Ipod. My nephew used to live with me and everytime I sync my Ipod his stuff is added to mine. I have no way to contact him for his password.

    I need to know how to remove an iTunes account associated with my computer. My nephew used to live with me but has moved out. Everytime I sync my iPod touch his stuff is added to my device. I have no way to contact him to get his password. How can I make this go away. He listened to music that is very offensive to me and I dont want it in my library or playlists. Any help would be greatly appreciated.
    Thank you in advance,
    Shelly

    You can use computer iTunes to help.
    Connect your iPod Touch to Computer's iTunes
    In iTunes, select your iPod Touch under DEVICES (left pane).
    On right pane select Music at the top.
    Now you can de-select the music/playlist or anything you don't want and click Sync button bottom right.
    You can do the above for Apps, Books, etc.
    You can of course, de-authorize the computer in iTunes menu Store.
    Note: That will make everything using his AppleID inaccessible.

  • Which Mac laptop would be good to use Mainstage 3 live? Ideally one that can have Ivory and Omnisphere working nicely

    Which Mac laptop would be good to use Mainstage 3 live? Ideally one that can have Ivory and Omnisphere working nicely

    Which Mac laptop would be good to use Mainstage 3 live? Ideally one that can have Ivory and Omnisphere working nicely

  • Anybody using MainStage as their only live mixer?

    I'm interested in mixing small combo gigs and maybe even some corporate a/v stuff using MainStage on my MacBook Pro in place of a mixing board.
    I'd probably get a small MIDI controller like the Korg nanoKontrol for quick access to a few key parameters, but I'm not looking to get all King Tubby about it. Also, I'd like to keep the overall footprint small.
    I'm figuring I would go with 8 in's and out's via my MOTU 896, and hook up to a power amp and speakers.
    Thoughts? Experiences?

    here's what I'm thinking about:
    Came up with this idea the other day and going to start working on it in the next couple weeks. 8 channel firewire interface (eventually 16) into mainstage setup as a virtual mixer like a lot of people have done...and then using touchosc on the iphone/ipod touch as my wireless control surface to control the live mix. then using the 2 of the outputs on the interface for the mains, and then having 4 independent monitor mixes for each musician using powered monitors on stage. This method will hopefully allow me to save presets for each song.
    http://www.hack2learn.org/wp-content/gallery/touchosc-vdmxinterface/TouchOSC-Int erface%20006-wText.png
    touchosc is program on the iphone that is basically an interface that allows you to put whatever- buttons/faders/rotary knobs/pads/eqs/x-y grids/ect -that you want on up to 4 pages...if you google it you'll get some ideas of what all you can program on it...the iphone then connects to your computer over a wireless network and sends OSC signals to the computer...then use a program like osculator that converts those signals to midi signals that can be sent to mainstage...then use the learn function to map all of your parameters..and thats basically it. You would think that there would be latency going over wifi, but i hooked this thing up to ableton to use it like a small MPC beatpad, and there was no latency at all. Of course i created a direct wireless network from my mac to my iphone..that might have helped...
    now obviously an iphone or ipod touch is small, but imagine doing all of this on an IPad? yes? I'm really excited about the IPad for this one reason almost...the idea of controlling the live sound "wirelessly" with a 10inch touch screen device from any part of the room...It theoretically sounds doable, but gonna have to go through some major testing before i rely on it.
    the one part i havn't figured out yet is to be able to run a headset with built in mic into the IPads headphone jack to use for monitoring and as a talkback mic to the stage. If only the IPad could run multiple programs at a time.

  • Can I use MainStage without owning Logic?

    I use Pro Tools and Reaper in the studio, so I won't to jump ship to Logic; simply b/c however nifty it is,  it's not worth the steep time-consuming learning curve.  However, for live performance as a keyboardist, I'm looking for a Mac-based VST host to be controlled by a USB/MIDI keyboard controller, and am wondering if  MainStage might be the way to go.  The price is so cheap, how could I go wrong?  But no matter where I search, I don't get a clear answer to these questions:
    Can I use MainStage without owning Logic?
    For a $29 download, does MainStage also come with all the content (sounds, etc.) for its built-in instruments, or is it assuming you already have those b/c you presumably own Logic?
    This question may need its own separate thread, but: Ideally, my keyboard setups for a "concert" may need as many as five VSTs per song (e.g., custom samples in Kontakt, Wurly, B-3, piano, glockenspiel, whatever) spread out in various discrete layers across a keyboard.  Has anyone tested this more-complex and memory-taxing sort of a setup out in a live situation?
    Thanks for any insight,
    Peter

    SASPro wrote:
    Can I use MainStage without owning Logic?
    If you buy it from the AppStore, YES
    SASPro wrote:
    For a $29 download, does MainStage also come with all the content (sounds, etc.) for its built-in instruments, or is it assuming you already have those b/c you presumably own Logic?
    All the instrument and FX plugs are included, and a (massive) additional free download within the Mainstage application will get you all the extra content.
    SASPro wrote:
    This question may need its own separate thread, but: Ideally, my keyboard setups for a "concert" may need as many as five VSTs per song
    Caution: Logic/Mainstage will only work with Audio Unit (AU) plugins, NOT VST. Most 3rd party plugs are available as AU plugs, but you need to make sure you have installed them.
    SASPro wrote:
    Has anyone tested this more-complex and memory-taxing sort of a setup out in a live situation?
    Yes, and memory/CPU issues not withstanding, Mainstage generally works extremely well for this.
    CCT

  • How to use mainstage with my pedalboard?

    Hello,
    I am looking for a way to run my Macbook (mainstage) through my pedalboard.   I will only be using mainstage as a consolidated effects that can be switched on and off as a whole.  I normally run into my MB using an M-audio fast track.  I would like to have something like a selector or something to bypass the computer if I don't want it on.  ie. guitar > fuzz > compressor > Macbook > Delay> amp (Not the real order lol)  What would be the best way to do this without losing my signal or having it go through mainstage when I don't want it on?
    Thanks for the help,
    Mike

    But you say "if the other instances are turned off" but this isn't possible.
    Since Kontakt is sample-based, anytime it's activated, it's going to have to reload its samples before it's ready to play. This would be unacceptable in a live situation, and MainStage is built for instant switching between patches.
    So basically I do need to use multiple instances of Kontakt, with each containing a single instrument. Hmmm. I'll give it a try, but I'm worried about when I want to have 16+ MainStage patches, each containing an instance of Kontakt.

  • Recording while using MainStage

    Hi,
    I'm using MainStage 2, together with a MIDI keyboard and a multi-track Zoom R16 recorder connected as USB audio interface to my laptop, to perform live with my band.  We would like to record some basic demo recordings, using some microphones plugged into my zoom recorder.
    I have tried recording with Logic simultaneously, but then some of the MIDI mappings in MainStage stop working as soon as I hit the record button.
    Can someone please explain how I can record input sources with Logic without affecting the key mappings of MainStage or does someone have a different solution?
    Thanks in advance!

    I think this can be achieved using the virtual sound card 'Soundflower' (google to find)
    have tried it and got some initial results
    I wish there were a simpler way - so if anyone has one...
    I find it difficult to believe that there is not a simple way to use a mainstage setup, decide you like it and then be able to use it in Logic....... surely this level of integreation exists????
    thanks

  • How do you connect lines for a drawing in order to use the live paint bucket tool?

    Hello! Im fairly new (okay not really) to using adobe illustrator
    I used the Image trace tool to outline this drawing of Captain America but unfortunately the lines arent connected and therefore
    messes up my colouring completely when I use the Live Paint Bucket tool.
    Is there a way to connect the lines so they are closed when I colour it? Or is there another way to color this drawing?
    Help would be greatly appreciated!

    Those gaps are very wide. Draw some paths and apply no fill, no stroke to them.
    Then make the live paint. In case the live paint already exists, you can go into isolation mode and then draw the paths. Or draw them and use Object > Live paint > Merge

  • Using MainStage with multiple MIDI inputs (two keyboards!)

    Hi Guys,
    I use two keyboards for my live gigs, and am thinking about moving all my sounds over to MainStage. Most of my recording uses Native Instruments and Logic's standard AU instruments, and then I have to find similar sounds on my Korg and Kurzweil for live...
    My question is... can you use MainStage with two MIDI controllers? I'd obviously want to set up the presets in MainStage so that there are different instruments being controlled by each synth.
    Would love any advice on whether this can be done, and a quick pointer as to how...
    Thanks heaps in advance,
    Mike

    Easily done (I'm using two USB controllers on a gig now). Just set them up in Layout mode, then be sure to select the input of choice for your specific channel strip(s) in each patch. Or of course you can set things up at the set or concert level as well.

  • How can i use windows live email with photoshop elements 5.0

    How to use Windows Live email program with Photoshop Elements 5.0. The prefference only lets you use Outlook express.
    Any help please.
    Al
    [email protected]

    You've got the wrong forum, the Photoshop Elements forum is this way:
    http://forums.adobe.com/community/photoshop_elements

  • Hello, is there a way to redact a word or item from a pdf using adobe pro X the same way you can if you convert a word doc using pro X on a pc?

    hello, is there a way to redact a word or item from a pdf using adobe pro X the same way you can if you convert a word doc using pro X on a pc?

    If the document is not a scanned image or protected from editing then you should be able to edit it. I would have to guess you have a scan and when you converted to Word, you ran OCR (Optical Character Recognition) on it converting the scanned image to live text.
    This is the forum for the free Adobe Reader which can not edit or redact.

  • Webcam problems using Messenger Live

    I've just purchased a new S10-2 running Windows 7.  When I've come to use the webcam to talk to my son using Windows Live Messenger I find that messenger displays my webcam  video OK, however my son can't see or hear anything.  The volume on the mic is turned up to full.  His picture shows a pic of a webcam with a red cross through it, no video although I can hear him talking.   I know his webcam is working, if I boot up my desktop everything is OK we can both get sound and video.
    Anyone any ideas how to get this up and running

    I have similar problems on an intermittent basis,
    which I have always attributed to poor or inconsistent internet
    band-width. Is your desktop wired and S10 using wireless?
    If so, try your S10 with wired internet.
    Or perhaps try a different way.
    I've had better experiences using Skype,
    Your son will need to load it too, of course

  • Can I use MainStage 2 with Logic Express 9.1.6

    Is it possible to use MainStage 2 with Logic Express 9.1.6.?  Are there any limitations to not having Logic Pro 9.  I'm very happy with LE9.1.6. as it meets all my needs (perhaps with the exception of not having Space Designer) but if I need to upgrade to get the most out of MainStage 2 then I will.
    Thanks.

    Actually I have found a way for at least the instrument plug ins to be accessed.
    I was able to set up an instance of Sculpture in MS2 and record it in LE using Soundflower.
    Route the audio from MainStage to Logic and record onto an audio track in Logic as follows:
    If not already installed, get SoundFlower. After installing it.
    A) Setup the sound you want in MS2 and audio output to Soundflower (remember to Apply Changes or it does not hold).
    B) In Logic Express set the audio input to Soundflower and create a new audio track for recording. Important: set Soundflower's audio output to however you listen to your audio or you won't hear anything.
    C) Press RECORD and start playing, LE captures Mainstage's sound.
    I have not tried to wire LE's output to MS2 to take advantage of Space Designer. but since this functions, I'm not sure why that couldn't work as well. It is still flipping though a few screens though...might just be easier to get Logic Pro from the App store....

  • How to Make a Video Call Using iChat to Someone Using MS Live Call

    What do I need to do to make/receive video calls using iChat to someone who uses Microsoft Live Call (using Windows Live Messenger to register me as a contact)?
    When I initially set up iChat, I selected AIM (AOL Instant Messenging) as my default messenger program. But I can't remember where I set that up. Where in iChat can I make that change from AIM to Windows Live Messenger?

    If its anything like MSN you cant video chat with ichat.
    The only way on MSN is.
    aMSN http://www.macupdate.com/info.php/id/14200/amsn
    Mercury http://www.macupdate.com/info.php/id/14970/mercury-messenger
    Or both of you use Skype.
    Mac version http://www.skype.com/intl/en-gb/download/skype/macosx/
    Pc http://www.skype.com/intl/en-gb/download/skype/windows/
    Or web based http://www.mebeam.com/

Maybe you are looking for

  • Trying to install 5.1 on older system.

    Hi all. I'm working on a client's machine and he's just bought Tiger and FCS 5.1 for it. The machine is a bit of a legacy machine, it's a 450mhz DP G4. Tiger is on and everything is updated to the latest versions and he also has FCP 4.5 on it. I know

  • Apache 2.2.2 Jrun 4 WinXP --- Apache connector problem.

    I configured External Web Server using Web Server Configuration tool. I have cross-checked all the artifacts like httpd.conf, etc. Everything looks fine. I started JRun and Apache multiple times. "C:/JRun4/lib/wsconfig/1/mod_jrun20.so" is present. I

  • 2012 R2: Use of Single Instance Store (SCCMContentLib) only

    Hi all, We have a System Center 2012 R2 Configuration Manager already running with almost every role (standalone, besides from wsus on another server as Software Update Point). The SC2012R2 server has several HDDs C:,D:,E:,S: with SCCMContentLib dire

  • Default WAN in RV042 Load Balancing

    If I choose the RV042 mode as load balancer and bind some protocol to specific WANs, what will happen to the protocols that I didn't bind to any specific WAN? will they go to WAN1 by default? Thanks

  • Just a 808 PureView user experience question

    Hi there, When the 808 asks for SIM pin code, the whole screen is nicely used for this process. Now, when the answer then comes, e.g. after a successful pin entry, the response text is something very tiny showed quickly on the left top corner of the