Using MAP on networks with AIX and Oracle

Im new to MAP. We have an environment with Windows and AIX hosts which i want to use MAP on. I see plenty of references to MAP being compatable with Linux and even HP-UX. But will it also discover AIX hosts too? In particular, Oracle databases
on AIX? Thanks!!

Some distros of Linux and HP-UX for UNIX are what is supported, but it may be possible for MAP to inventory AIX, but no guarantees. For Oracle, when MAP inventories a Linux/UNIX machine, it queries for the RPM and DPKG installations then looks for ‘Oracle’
in the vendor attribute. Any application that is not listed in either of those queries is not discovered by MAP.
Therefore, if Oracle was installed by some other means then it is unlikely to be discovered through this method. Admittedly, I have almost no knowledge of how these services work and if they register software or something else.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

Similar Messages

Uses for the Action Property with SQL and Oracle DB Adapters

This thread is a complement to the Wiki Article
BizTalk: Streamlining WCF SQL and Oracle Messaging-Only and Other Patterns
The question. In what circumstances is explicitly setting the Action value with the WCF SQL and Oracle DB bindings useful or beneficial.
A complimentary question. Is it even possible to set the Action value to anything other than exactly what is required by the Message.
I ask because of three very specific behaviors of the bindings themselves:
The binding enforces a match between the Action and the Message, therefore...
There is a one-to-one relationship between the Message and Action, but...
The binding is able to correctly derive and perform the requested operation with the unspecific CompositeOperation.
For clarity, I understand how to set the Action. I. understand what the Action represents in the SOAP scheme. I understand how Action can be used as an abstraction for SOAP operations.
Thoughts?

Do you have any good suggestion to learn how to use action property with SQL and Oracle DB adapters? I learn a lot from your replies for years in BizTalk forum. :)

BRBACKUP fails with DB13 and TIVOLI on AIX and ORACLE

Hi,
We have the Tivoli setup for SAP on AIX and Oracle.
when we run the brbackup directly we are able to get it through. But when we do the same with DB13 and Tivoli attached we are not able to get through and it throws an error.
Would be very nice and kind of you if you could share your setup knowledge with me regarding Tivoli and SAP.
Thanks & Regards
Shrenik
9393930803

Unfortunately nobody here has a crystal ball to look into and see what is happening on your system in both cases.
We could ask you "have you done this" or "did you configure that" but it´s very cumbersome.
So please: provide logfiles of failed attempts if there is "an error" so we see which error it is and we can see if we can help.
Markus

Install SAP ERP 6.0 with Linux and Oracle RAC

Hi Guru,
I want to install SAP ERP 6.0 with Linux and Oracle RAC. Is this possible?
Where do I find information?
Thanks,
Hugo.

Hello Hugo,
You can use either RAC or dataguard. On note [105047|http://service.sap.com/sap/support/notes/105047]:
14. Data Guard
    o You can use "Physical Standby".
    o You cannot use "Logical Standby".
    o You can use Data Guard Broker.
    o You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
    o In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
    o Maximum Protection causes the primary database to terminate if problems occur in the standby database.
60. Real Application Cluster (RAC)
    o You can use this feature in accordance with Note 527843.
Regards,
Eduardo Rezende

I use a Win7 PC with iCloud and Outlook 2010 for syncing my calendar and contacts. I can enter data in my Outlook Calendar and it will appear in iCloud, but data entered in iCloud does not sync back to Outlook. ICloud syncs to my iphone fine both ways.

I use Win 7 PC with iCloud and Outlook 2010 for syncing my Contacts and Calendar. They have stopped syncing...mostly.
Now, appointments I enter on my local Outlook (iCloud) Calendar goes up to iCloud fine. But, data I enter on iCloud directly does not come down to my local Outlook iCloud Calendar. If I reboot the computer, the iCloud data shows up.
Also, Contacts I try to enter on my Outlook (iCloud) Contacts goes up to iCloud fine, but does not show up in my local iCloud Contacts.
All syncing works with my iPhone.
I have signed out of iCloud on PC. I have stopped syncing and re-started. No change.
I have an .aplzod folder for iCloud. I have a separate Earthlink.net.pst email account in Outlook and a me.com.pst Outlook email account (which I don't actually use) listed under Data Files.
Any help would be appreciated. Curious that Outlook will upload to iCloud but not receive downloads unless I reboot. However, rebooting does not download the missing Contacts.
Jim Robbins

Hi Jim!
You've started off with some good troubleshooting steps, so let's see if we can take this a little further and figure out what the issue is with your iCloud contacts and calendars. I have two articles here that will help you troubleshoot this issue a little further, but the troubleshooting steps for both articles are exactly the same, so I will lay those out for you here:
Note: When using iCloud Control Panel 2.0 and later, iCloud Calendar event descriptions in Outlook 2010 do not support text formatting (bold, italics, or underline), HTML, images, or attachments. The contextual (right-click) menu has also been disabled.
If you are having trouble with a PC (with Outlook 2007 or 2010) and iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Verify that you are using a Windows configuration that is supported by iCloud. For more information, see iCloud system requirements.
When enabling Calendars in the iCloud Control Panel, part of the setup process is to copy your Calendars data from the default Outlook ".pst" file to iCloud, and then remove the Calendars from the ".pst" file by placing them in the Deleted Items folder in Outlook. The Calendars data is then stored in the iCloud data set within Outlook so that changes can be pushed to and from Outlook by iCloud. Be sure you are looking for your data within the iCloud dataset within Outlook after enabling Calendars in the iCloud Control Panel. The deleted files can be seen by viewing Deleted Items within your Outlook Folder List. This is not iCloud removing your data; iCloud simply copies your data into the iCloud data set and then removes the local Calendars data by placing it in the Deleted Items folder.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in Outlook. Click here for more information about troubleshooting your Internet connection.
Open a secure website to test if you are online as is necessary for iCloud Calendar. This also tests if the ports 80 and 443 are accessible. Outlook requires port 443 access to iCloud in order to push and pull updates to and from the iCloud Calendar servers.
Verify that your iCloud member name is entered into the iCloud Control Panel pane. See iCloud Setup for more information about setting up iCloud on Windows.
Completely close and reopen the iCloud Control Panel.
If you recently made changes in Outlook and they are not moving to your other devices or vice-versa, click the Refresh button in Outlook.
Turn iCloud Calendar off and back on:
Close Outlook.
Open the Windows Control Panel:
In Windows 8, move the pointer to the upper-right corner of the screen to show the Charms bar, click the Search charm, and then click the iCloud Control Panel on the left.
In Windows 7 and Vista, choose Start menu > All Programs > iCloud > iCloud.
Remove the checkmark in the checkbox next to Mail, Contacts, Calendars & Tasks, and click Apply. Wait a few seconds, then replace the checkmark, and click Apply.
Open Outlook and test to see if the issue has been resolved.
Ensure the iCloud Outlook Add-in is active within Outlook.
Outlook 2010:
Open Outlook 2010.
Click the File menu.
Click Options in the left panel of the Outlook window.
Click Add-Ins in the left panel of the Outlook Options window.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For Outlook 2007, follow these steps to verify the iCloud Outlook Add-in is active
Open Outlook 2007.
From the Tools menu, choose Trust Center.
Select Add-ins from the left column.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For additional information about managing Add-ins with Microsoft Outlook, see this Microsoft support document.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thanks for using the Apple Support Communities!
Cheers,
Braden

It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?

It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?
I was using "remote" with a D-link modem, that works fine at my iPad. But now I´m using only the cell phone as modem 3G, and don´t want to intall a router to put new cables at my notebook.

What?
You want to control iTunes on your computer using the Remote app on your iPad?
And you want to connect the iPad and computer through your Nokia?
No, this will not work.
Just create a network with your notebook.

Its compatible OWB 9.0.4.10 with W2003 and Oracle 10.2.0.1?

I have to migrate a DWH on Server 1 (OWB 9.0.4.10, Oracle Workflow 2.6.2, Windows 2000, Oracle 9.2.0.6) to Server 2 1 (OWB 9.0.4.10, Oracle Workflow 2.6.3, Windows 2003, Oracle 10.2.0.1)
Its posible to use OWB 9.0.4.10 with W2003 and Oracle 10.2.0.1?
Thanks very much in advance!

Hi,
This is the relevant section from Metalink's 'Certify' section:
Server Certifications
Product      Server      Status      Addtl. Info.      Components      Other      Issues
10.1.0.x      9.2.0.x      Certified      None      None      Yes      None
10.1.0.x      8.1.7 (8i)      Desup:RDBMS      None      None      N/A      N/A
10.1.0.x      10.2.0.x      Certified      Yes      None      Yes      None
10.1.0.x      10.1.0.x      Certified      None      None      Yes      None
Additional info on 10gR2 DB: Database 10.2.0.x is only certifed with Oracle Warehouse builder patch set 10.1.0.4 or higher.
So: bad luck, need to upgrade OWB 10.1.0.4 to at least.
I suggest you learn to use Metalink for having these kinda questions answered.
Good luck,
Erik Ykema

Unable to connect to network with Safari and Software Update

A user I support has encountered a problem with networking. He is unable to connect to the network with Safari and Software Update, but IS able to connect and surf with Foxfire and some other programs. Another unusual symptom is that he actually can connect to one web site (which is in his Bookmarks Bar) with Safari, but can't connect to anything else. He's also unable to navigate off of that one site he connects to. When he runs Network Diagnostics, he gets all green lights (no problems). He has fixed permissions, deleted Safari Cache and .plist, rebooted - not fixed yet. He's using 10.4.8 on a PowerPC G4. Any ideas appreciated (this is the wierdest I've seen in a while!).

Here's what he did. After reading your post, he created another location in his network preferences, entering EXACTLY the same info that was in his old location (he even used the old DNS addresses), except using a new location name. Then he chose the new location and "everything worked". It's one of life's great mysteries. Thanks for your help - it is appreciated.

Full mesh VPN solution for on MPLS network with PE and CPEs

Hi,
We are trying to evaluate some best solution for Hub-Spoke mesh vpn solution in a MPLS network. The VPN hub router will be in PE router and all the VPN spoke will be in CPE.
Can someone please let us know what will be the best vpn solution, we understands that there will be some technical limitations going with GETVPN but still we did counld find any documenation for possiblity of using DMVPN.
How about the recent flexvpn, can fex-vpn work on this requirement, where can i get a design/configuration document.?
thanks in advance.

Hello,
GetVPN is intended for (ANY-to-ANY) type of VPN communication, over an MPLS network with Hub and Spoke Topology, your best Option is to look for Cisco (DMVPN) implementation where this type of VPN is primarily designed for Hub & Spoke.
Regards,
Mohamed

Help with VB6 and Oracle Spatial

Does anyone knows how to access to the Geoloc field of an oracle 8.16 table using VB6?
I need to read/write it but Ado doesn't like very much that dataType...
I'm triyng with ADO and oracle's oraOleDB, but i'll appreciate any other working solution.
Thank You.
Daniela.
null

We have written a stored procedure(Procedure) in Oracle to update the data type fields that are unavailable in ADO calling the procedure using ADO from VB.
Dinghy, how much of a learning curve is it to go from ADO to OO4O (Oracle Object for OLE)?
Thanks,
Thomas L
null

How come I can't put music on my ipod? I already have a fair amount of music on my ipod but I have enough space for more. I am using a new computer with itunes and it is telling me if I wasnt to put the new music on my ipd i need to erase my ipod HELP!

How come I can't put music on my ipod? I already have a fair amount of music on my ipod but I have enough space for more. I am using a new computer with itunes and it is telling me if I wasnt to put the new music on my ipd i need to erase my ipod HELP!

Because you can only synce with one iTunes library and you are switching libries by using the new computer. To nake this yyour syncing computer:
- Move all the media(apps, music, synced video and photos etc) to the new computer.
- Connect the iPofd yo the computer and bake a backup fo the iPod by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup.
Note that the backup that iTunes makes doe not include media.
To move mdia to the new computer see:
iTunes: How to move your music to a new computer
iTunes Store: Transferring purchases from your iOS device or iPod to a computer

Create PDF report with APEX and Oracle 11g doesn't work

Hi everyone,
I have a problem with the downloading of PDF reports from APEX with Oracle 11g.
When I try to download a PDF, Acrobat Reader says it can not open the file.
I have done the same test in an environment with APEX and Oracle 10g and it works perfectly.
Does anyone know if there is a known bug for version 11g.
Thank you very much.

Hi Munky,
I open the generated file the Notepad++ I can read the next message:
*<HTML><HEAD><TITLE>500 Internal Server Error</TITLE></HEAD><BODY><H1>500 Internal Server Error</H1>OracleJSP:*
An error occurred. Consult your application/system administrator for support. Programmers should consider setting the init-param <code>debug_mode</code> to "true" to see the complete exception message.</BODY></HTML>
I have not idea can I solve the problem.
Have you got any solution for this problem??
Thank you so much.
Victor Muñoz.

Cannot convert webpages to pdf using Acrobat X Pro with IE9 and Windows 7, worked fine until a few m

Cannot convert webpages to pdf using Acrobat X Pro with IE9 and Windows 7, worked fine until a few months and updates ago

I tried your suggestion, not knowing that the direct pdf printer would also "save as" PDF, but when I try your suggestion and use the Adobe PDF printer that is a direct creation of the PDF from the browser (IE9), instead of the "black out" areas I get when I use the "Convert to" button, I get missing blocks of the resulting PDF, and only get the first 1/4 to 1/3 of the webpage.
Just to clarify, when I said I print the webpage and then scan, that is a work around I have to do if I need a scanned version of the way a webpage appears on a particular date and time, instead of the one step process I used to be able to do when Adobe Acrobat would actually convert the webpage to a pdf without blackout areas or, if I try your suggestion, blank spots with a partial webpage. But the idea was one I had not thought of and I appreciated the thought.
Yes, Acrobat was updated, and is updated, and was working fine until a few months ago, Win 7 and Office 32 bit versions, Office 2010

Can I use HP Pro 8600 with usb and wireless at the same time

Can I use HP Pro 8600 with usb and wireless at the same time? Sometimes I cannot get the wireless to work, it seems to be my laptop. It would be nice if I could use the usb, but it doesn't work. What should / can I do, if anything?
Sam

Hi,
Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

ECC 6.0 SR3 AIX and ORACLE installation error - work processes dies

Hi ,
My environment is
AIX 6.1
oracle 10.2.0.2
ECC 6.0 SR3
i'm performing the installation on above mentioned system, and got stuck at a Start ABAP instance step.
instance is not coming up and all the process are starting and and then again die one by one.
In trace of all wor processess , i can see the error trace as follows:
PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M ThErrPrivHandle: set th_errno (11)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T16/M0 [thxxhead.c   10973]
M
M Modeinfo for User T16/M0
Full trace for work process is
trc file: "dev_w16", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
M sysno      00
M sid        DMB
M systemid   324 (IBM RS/6000 with AIX)
M relno      7000
M patchlevel 0
M patchno    144
M intno      20050900
M make:      single threaded, Unicode, 64 bit, optimized
M pid        790666
M
M
M Tue Jan 6 15:41:58 2009
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc16 1 790666) [thxxhead.c   1281]
M ThInit: running on host MBDEVECC
M calling db_connect ...
C Got LIBPATH=/usr/sap/DMB/DVEBMGS00/exe:/usr/sap/DMB/DVEBMGS00/exe:/usr/lib:/lib:/usr/sap/DMB/SYS/exe/run:/oracle/client/10x_64/instantclient from environment
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@DMB on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1 0x113701b30 0x11371a068 0x113719918
C Attaching to DB Server DMB (con_hdl=0,svchp=0x11371d268,srvhp=0x11371d4e8)
C Starting user session (con_hdl=0,svchp=0x11371d268,srvhp=0x11371d4e8,usrhp=0x113709970)
C Now '/@DMB' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0x11371d268,usrhp=0x113709970)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@DMB on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1 0x113701b30 0x11371a068 0x113719918
C Starting user session (con_hdl=0,svchp=0x11371d268,srvhp=0x11371d4e8,usrhp=0x113709970)
C Now 'SAPSR3/<pwd>@DMB' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance DMB is running on MBDEVECC with ORACLE version 10.2.0.2.0 since JAN 06, 2009, 15:41:46
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20090106 154158 MBDEVECC
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Jan 6 15:42:00 2009
I MtxInit: 16 0 0
M SHM_PRES_BUF               (addr: 0x7000000057a0000, size: 4400000)
M SHM_ROLL_AREA          (addr: 0x700000140000000, size: 134217728)
M SHM_PAGING_AREA          (addr: 0x700000150000000, size: 67108864)
M SHM_ROLL_ADM               (addr: 0x700000005bd4000, size: 2672386)
M SHM_PAGING_ADM          (addr: 0x700000160000000, size: 656416)
M ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0x700000170002000
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 11776 bytes (50 server) at 0x700000180000000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 16 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B db_con_shm_ini: WP_ID = 16, WP_CNT = 17, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0x7000001b0000100, size: 30000000, end: 0x7000001b1c9c480)
B dbtbxbuf: Buffer TABLP (addr: 0x700000005e62100, size: 10240000, end: 0x700000006826100)
B dbexpbuf: Buffer EIBUF (addr: 0x700000006827108, size: 4194304, end: 0x700000006c27108)
B dbexpbuf: Buffer ESM   (addr: 0x7000001c0000108, size: 4194304, end: 0x7000001c0400108)
B dbexpbuf: Buffer CUA   (addr: 0x70000017300b108, size: 3072000, end: 0x7000001732f9108)
B dbexpbuf: Buffer OTR   (addr: 0x7000001d0000108, size: 4194304, end: 0x7000001d0400108)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Tue Jan 6 15:42:01 2009
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x113a30700
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x7000001732fb070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x7000001732fb590
S    using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 11460kb, dir_size: 11392kb.
A Attached to PXA (address 0x7000001e0000000, size 300000K)
A abap/pxa = shared unprotect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit      = unlimited
=> Stack limit     = 4294967296
=> Core limit      = 1073741312
=> File size limit = unlimited
=> Heap address = 0x0x113afcb80
=> Stack address = 0xfffffffffffdd60
=> Stack low     = 0xfffffffffffb470
=> Stack high    = 0xffffffffffff7c0
=> Stack Trace:
     pthread_kill() at 0x9000000005b9450
     praise() at 0x9000000005b8cac
     raise() at 0x90000000002b0f0
     abort() at 0x900000000094528
     ab_init() at 0x1002038d0
     ThrInitRunTime() at 0x1003d1864
     ThStartUp2() at 0x101a9caf0
     ThInit() at 0x1000e9678
     ThStart() at 0x1000fe1b0
     DpMain() at 0x10156c770
     nlsui_main() at 0x101a99998
=> CPU Registers:
     msr = 0xa00000000000d032     iar = 0x09000000005b9450
     ctr = 0xffffffff000000bc      lr = 0xffffffffffffffff
     xer = 0x00000000ffffffff      cr = 0x0000000000585000
     r00 = 0xffffffffffffffff     r01 = 0x0fffffffffffdd60
     r02 = 0xffffffffffffffff     r03 = 0x0000000000000000
     r04 = 0xffffffffffffffff     r05 = 0xffffffffffffffff
     r06 = 0xffffffffffffffff     r07 = 0xffffffffffffffff
     r08 = 0xffffffffffffffff     r09 = 0xffffffffffffffff
     r10 = 0xffffffffffffffff     r11 = 0xffffffffffffffff
     r12 = 0xffffffffffffffff     r13 = 0x0000000112d77bd8
     r14 = 0x0000000110cf5dd8     r15 = 0x0000000110028718
     r16 = 0x0000000110001ee8     r17 = 0x0000000000000000
     r18 = 0x0000000000000000     r19 = 0x0000000110027538
     r20 = 0x0000000110572f50     r21 = 0x0000000110572fb0
     r22 = 0x0000000110572f98     r23 = 0x0000000110572f80
     r24 = 0x0000000110573610     r25 = 0x0000000110000e40
     r26 = 0x00000001105737c0     r27 = 0x0000000101baa950
     r28 = 0x0000000112d6fe50     r29 = 0x0000000000000006
     r30 = 0x0000000000000006     r31 = 0x0000000000000001
M ***LOG Q0E=> SigIGenAction, signal ( 6) [sigux.c      935]
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 16
M
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_VB2WP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = 16
M    mode = 0
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM
M
M Modeinfo for User T16/M0
M
M    tm state = 2
M    uid = 17
M    term type = 0x2
M    display = 0x0
M    cpic_no = 0
M    cpic_idx = -1
M    usr = >SAPSYS      <
M    terminal = >                    <
M    client = >   <
M    conversation_ID = >        <
M    appc_tm_conv_idx = -1
M    its_plugin = NO
M    allowCreateMode = YES
M    blockSoftCanel = NO
M    session_id = >                                <
M    ext_session_id = >                                <
M    imode = 0
M    mode state = 0x41
M    mode clean_state = 1
M    task_type = 0
M    lastThFc = THFCINVA
M    lastAction = TH_IACT_NO_ACTION
M    th_errno = 11
M    rollout_reason = 0
M    last_rollout_level = 0
M    async_receives = 0
M    cpic_receive = 0
M    em handle = 8
M    roll state = 1
M    abap state = 1
M    em state = 3
M    eg state = 1
M    spa state = 1
M    enq state = 0
M    softcancel = 0
M    cancelInitiator = ?
M    clean_state = DP_DEFAULT_CLEANING
M    next hook = T-1/U-1/M255
M    master hook = T-1/U-1/M255
M    slave hook = T-1/U-1/M255
M    debug_tid = 255
M    debug_mode = 0
M    mode type = 0x1
M    debug = 0
M    msg_count = 0
M    tcode = >                    <
M    last_wp = -1
M    client conversation_ID = >        <
M    server conversation_ID = >        <
M    lock = 0
M    max enq infos = 0
M    act enq infos = 0
M    em_hyper_hdl = 0x700000030532aa8
M    plugin_info = NULL
M    act_plugin_hdl = -1
M    act_plugin_no = 0
M    max_plugin_no = 0
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M ThErrPrivHandle: set th_errno (11)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T16/M0 [thxxhead.c   10973]
M
M Modeinfo for User T16/M0
M
M    tm state = 2
M    uid = 17
M    term type = 0x2
M    display = 0x0
M    cpic_no = 0
M    cpic_idx = -1
M    usr = >SAPSYS      <
M    terminal = >                    <
M    client = >   <
M    conversation_ID = >        <
M    appc_tm_conv_idx = -1
M    its_plugin = NO
M    allowCreateMode = YES
M    blockSoftCanel = NO
M    session_id = >                                <
M    ext_session_id = >                                <
M    imode = 0
M    mode state = 0x41
M    mode clean_state = 1
M    task_type = 0
M    lastThFc = THFCINVA
M    lastAction = TH_IACT_NO_ACTION
M    th_errno = 11
M    rollout_reason = 0
M    last_rollout_level = 0
M    async_receives = 0
M    cpic_receive = 0
M    em handle = 8
M    roll state = 1
M    abap state = 1
M    em state = 2
M    eg state = 1
M    spa state = 1
M    enq state = 0
M    softcancel = 0
M    cancelInitiator = ?
M    clean_state = DP_DEFAULT_CLEANING
M    next hook = T-1/U-1/M255
M    master hook = T-1/U-1/M255
M    slave hook = T-1/U-1/M255
M    debug_tid = 255
M    debug_mode = 0
M    mode type = 0x1
M    debug = 0
M    msg_count = 0
M    tcode = >                    <
M    last_wp = -1
M    client conversation_ID = >        <
M    server conversation_ID = >        <
M    lock = 0
M    max enq infos = 0
M    act enq infos = 0
M    em_hyper_hdl = 0x700000030532aa8
M    plugin_info = NULL
M    act_plugin_hdl = -1
M    act_plugin_no = 0
M    max_plugin_no = 0
M
M ***LOG Q02=> wp_halt, WPStop (Workproc16 790666) [dpuxtool.c   260]
Can some one please help me.
Regards
Saurabh

This looks like some sort of resource issue. Have you looked at this post (similar issue): [JC00 instance could not start on the last phase of NW04 installation|JC00 instance could not start on the last phase of NW04 installation;?
Hope that is helpful.
J. Haynes

Using MAP on networks with AIX and Oracle

Similar Messages

Maybe you are looking for