Using Maverick with my HP1025nw and I can't customize settings
Hello,
I have a Mac on 10.9.3 and I have an HP Printer 1025nw and I followed the isntructions on the HP website to get the driver and it didn't work (it just told me to system update in the app store). I found some driver online finally that allowed me to start printing but even so it seems as though the options are very limited and on all the other forums, the settings all shown on PC where they have way more options. I really just want to be able to turn on Economy Mode, or lower the resultion, or do anything to save some toner and the only 2 options I get under the Print Quality are 600DPI and imageRET2400 which both look great but way better than I need it too and uses up a lot of ink. I have seen people use way more choices on this printer but for PC, is it possible these are the only options on MAC? Is it possible that it has to do with my OS and if I use a different Mac it might work? I know this is more of a printer question, but I have read through so many forums and no one seems to have an answer, I attached a picture of all I see as an option for settings. PLEASE HELP ME
Check System Preferences > Notifications and make sure the Calendar entry is set up as you wish.
Similar Messages
-
How can I use LCCS with ActionScript 3 and Flash CS4?
Hi,
Using Stratus I was able to create an an application using Action Script 3 and Flash CS4. The sample code on the Adobe site was quite straight forward and easy to understand. I now want to switch over to LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS. Do I need to know Flex to be able to use LCCS? Everything was quite simple and easy to understand with Stratus and makes complete sense. But LCCS is really confusing. Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client. There is nothing in the LCCS SDK that covers Flash and Action Script 3. Please help! I found the link below on some forum but it takes me nowhere.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=yThanks Arun!
Date: Thu, 29 Apr 2010 11:44:10 -0600
From: [email protected]
To: [email protected]
Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
Hi,
Welcome to the LCCS world.
Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a pretty basic app, but should help you moving.
We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
Thanks
Arun
> -
I am using FIREFOX with OS X and suddenly I lost the slot at the top of the browswer in which to type the URL's. It just disappeared.
How can I get it back?View --> Toolbars --> Navigation Toolbar
-
I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.
You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
http://support.apple.com/kb/ht4108
Cheers, Tom -
using windows vista with two users and I can only open books with adobe digital edition
You must authorize the second computer with the same Adobe ID.
There are sometimes issues with this registration: if you have them ....
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID. -
I have a new ipad which needs itunes 10.7 or later to download my music onto it... but my apple laptop is not compatible with this as it is too old... can i use itunes with this ipad and apple laptop?
To use itunes 10.7 you need to have Snow Leopard operating system installed
These are the system requirements
System Requirements:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
If you can run Snow Leopard you need to purchase it
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard -
10.9.1 used terminal with rm-rf and deleted my user data. Can I get back the deleted data? Help. I really just need mail file and desktop files recovered.
If data were on the SSD drive with TRIM - practically no chance. If HDD - use DIY recovery software such as DiskDrill or DataResue.
As quickly as possible turn off the drive where deleted data.
Use an external HDD with installed OSX for data recovery.
Alex
Apple Certified Support Professional -
i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?
Care to share which OS you are using?
-
I am having trouble, my icloud is using an old Apple ID, and i can no longer access that email account, or know the password to that, how do i switch it to my new Apple ID?
Having the email address is not necessary. It is just the username for the device. All you need is that Apple ID and password. Now, if you forgotten the password, then you have more work to do. Since that email is no longer active, you would need to send the reset to your rescue email, if you remember that. Or you will need to contact Apple Security for help. Apple ID: Contacting Apple for help with Apple ID account security
-
I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.I am going on the guess that an old driver is still installed...
Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
Reset the Printing System:
OS X Mavericks: Reset the printing system
Now, Add the printer in Print & Scan prefs. -
Thank you for approving my feed iTunes . The only problem is, there is no art work, even though artwork was submitted correct sizes and formats were used. Why is this and how can the problem be rectified?
Thanks for getting back. Hadn't got round to re uploading the amended feed. I just did it now.
The only thing is, Feed Validator doesn't like it because of the picture size, and a couple of other things, it reeds the following:
Sorry
This feed does not validate.
line 22, column 14: width must be between 1 and 144: 1400 [help] <width>1400</width>
^
line 23, column 15: height must be between 1 and 400: 1400 [help] <height>1400</height>
^
line 25, column 21: XML parsing error: <unknown>:25:21: not well-formed (invalid token) [help]
<itunes:image href=http://www.whiteberg.com/Wdotfontitunes2.png" />
^
In addition, interoperability with the widest range of feed readers could be improved by implementing the following recommendations.
Your feed appears to be encoded as "utf-8", but your server is reporting "US-ASCII" [help]
line 4, column 114: Self reference doesn't match document location [help]... dcast.xml" type="application/rss+xml" />
^ -
My iPhone five decided to go crazy and give me a white screen with black stripes and I can't get into my phone. I can only use Siri! What's happening?
You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
Cheers, Tom -
Integrtion Scenario using BPM with two sender and multiple receiver
integrtion Scenario using BPM with two sender and multiple receiver
How many Application Components are required?Hi Vinod,
1) In integration repository you can have one or many software components it depends on your landscape orchestration
2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
also each connection between systems and bpm must have receiver determination and so on.
Advice: Please treat BPM as a separate system.
best,
Wojciech -
For anyone who has used "Smilebox" for greeting cards: I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for use with Smilebox.
For anyone who has used "Smilebox" for greeting cards: I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for use with Smilebox.
-
Hi Im using os 10.7.5 and i can't see the progress status in the launch pad and in purchase tab in mac app store. PLEASSSSSEEEE HELP!
HI guys! can anyone help me with this?!?
Maybe you are looking for
-
Como posso fazer uma diferença de posição (X2-X1) e (y2-y1) entre dois (2) distintos cursor? Veja uma imagem com o erro: não entendi. Muito obrigado. Juscelino. Solved! Go to Solution.
-
How to Make Flash CS4/Dreamweaver CS4 Website Function on all Latest Mobile Devices
Hello! I am trying to add code into my Dreamweaver CS4 file and/or Flash CS4 file in order to have the website I have created work across all of the latest mobile devices as well as traditional online systems. My flash file has a transparent stage, a
-
Problems with Oracle Thin Driver
Hi, I'm having major problems configuring the Oracle Thin Driver for use with CMP Entity Beans. What am I doing wrong? Configuration: Windows 2000 Professional, WebLogic 6.1, Oracle 8.1.6, Oracle Thin Driver 8.1.7 (classes12.zip is the first thing in
-
MP in DMZ for Internet facing clients and MAC systems
I am planning to install an MP, DP and SUP in our DMZ to be able to manage following - Internet facing clients - In house MAC system - All Mobile device I was wondering what ports I would be needing to open in DMZ so communication in/out DMZ to co
-
PO/ STO - ship complete order
Hello, Is is possible to flag a PO/STO so that the shipping location is informed that all line items must be shipped together? (i.e. the whole order must wait for delivery until all materials are available). This is desirable in the cases like custom