Using MBOX 2 with Logic Pro 8.

I have downloaded the core audio files, and I am stuck. I'm not really sure how to open it up in Logic, and control it. If anyone can give some advice, or post a tutorial that would be great. Also, the MBOX2 seems to only power on every other time I plug it in. Its very inconsistent to power up. Any explanations on that? Thanks for all the help.

When I switched from PC/Pro Tools LE to iMac/Logic, I tried to work with my MBox2 but gave up. It's just not well suited for working with Logic. I bought the Duet for $500 and it works great and sounds much better than the MBox2. Better pres and converters. I'll upgrade to an Ensemble soon, but for $500, if all you need is two channels, the Duet is a great way to go. Also, latency is much better with Duet than with MBox, at least in my experience. I keep my buffer at 256 and can barely discern latency at all while getting all the plug-in power I need. If I need to truly knock out latency, I can still go down one or two more buffer sizes.

Similar Messages

Using iControl with Logic Pro 8 - can you assign "undo" and "click on/off"?

Hi Guys
I know the M-Audio iControl works fine with Logic Pro 8 - the Logic 8 control surfaces manual has heaps of info on page 107 onwards about how to use the iControl.
Which is cool, because for simple remote tasks the iControl is brilliant. BUT I notice there are no "undo" or "click on/off" buttons on the iControl. Apparently (according to the control surfaces guide) you can assign different functions yourself.
Does anyone know if it's possible to assign these two features to say the "Option+Record" button and "Option+Cycle" buttons?
If anyone has any experience using the iControl with Logic, and personalising the controls, please let me know!
I have seen a cheap iControl and it might be a great solution rather than forking out for a Presonus Faderport or something more expensive...
Thanks heaps!
Mike

I've tried this (Mainstage) on both my home and mobile setups and there is one anomaly....
If I try to open a saved concert from the 'open recent concerts' menu item, nothing happens - However if I open a saved concert from the normal 'open' menu item, it all works as it should. Apart from that everything else 'just works'.
Obviously there is a variance between my findings and worshipvertical's, which is why I urge everyone to test for themselves to see what works and what does not.
If it works, great! You've saved a pot of money - If it does not work, I'm not sure I'd retain that much in the way of loyalty to the Logic platform, especially in view of the shorter and shorter enforced obsolescence periods that are now being forced upon us. Who knows where Apple is going next?
My opinions and findings, nothing more - or less
-Rob

Cannot use Battery with Logic pro

An Know how to use battery2 with logic
because seems the logic au managerr can't find battery

hi
did you run the au validation programm? maybe if the validation crashed or didnt work you should update battery with the au hotfixes. battery 1 and 2 working for me since first installation.
if the registration of battery or other plug-ins expired they will also crash in the au manager.
best
marc

ImpOSCar - Anybody using this with Logic pro 8

I'm thinking of buying impOSCar to use with Logic. Is anybody here using this software synth? Any problems with multiple instances of the plugin? bugs / crashes etc? Demo seems to work just fine but just wanted to check before handing over the cash.

One of my favourite softsynths.
Be sure to also pick up my (and other) extra patches from GForceSoftware.com...
Works great in Logic.
And as a bonus, it's one of the synths that's had it's internal parameter specifically mapped for the Logic Control, so all the parameters are arranged in groups of 8, with all the related parameters together (so one group of 8 is OSC parameters, another is filter params, another is envelope params etc). This makes it one of the few synths that can quite comfortably be tweaked via a Mackie Control or anything using the same MCU protocol, and is a really nice attention to detail thing from the GForce chaps.
Highly recommended.

Is anybody using macbook with logic pro ? impressions ??

anybody ?
or do you think its a good idea to run logic on it ?
thanks

cool
i tried using logic with pb 12"
but couldnt have any plug ins active when recording vocals or it records crackly.
th escreen sizeis no problem, coz i set up screen sets , so f1 for 12 vocal tracks, f2 for next 12, f3 for mixer part 1, etc
click of a button to see what you want big enough, i never really need to see all the tracks in one go
i would have thought the ibook would have more problems than the pb !
but maybe your studentis just using it for midi....
which takes no power lol....
anyone actually using a macbook with logic ?

Using Platinum Voicemaster Pro Vocal Channel Strip with Logic Pro & MBox 3

Hiya,
I was wondering if you can help me please.
I have a small little home studio that I am currently building (just to record vocals mainly to instrumentals as I am singer/songwriter).
I am currently using Logic Pro 9 and MBOX Mini 3 as my midi interface but my producer who is based overseas told me to get a preamp. Many musicians have suggested I purchase Platinum Voicemaster Pro Vocal Channel Strip. CAN ANY CONFIRM WHETHER THIS WILL WORK WITH LOGIC PRO 9 AND GIVE ANY ADVICE AS TO HOW IS THE BEST WAY TO USE IT WITH LOGIC PRO 9 AND MY MBOX MINI 3?
THANK YOU SO MUCH FOR YOUR HELP.
RUSHELLA
X

Thank you both for your input. I am back on the case again, this time with a fully functioning FCB1010. Right ou of the box the pedal does successfully send volume and pan with expression pedal a and b respectively.
What I would next like to accomplish is to have exp. ped. b now control a plug-in parameter instead, the pedal range on the fuzz-wah plug-in of Logic Pro 7 for expample.
When I use Automation Quick Access to edit the assignment of ped. b as Bryan suggested, Logic appears to be receiving the info from ped. b and creating the new assignment (as indicated in the Controller Assignments window), and yet the actual functionality doesn't change, that is, ped. b continues to control pan.
Any suggestions?
Best regards, Dan
Dual 2 GHz PowerPC G5 Mac OS X (10.4.8)

Questions about Novation Remote 25SL integration with Logic Pro 8

Preface: I have to apologize in advance if this seems somewhat confusing. I'm sure some of the terms I'm using are just plain wrong - I'm somewhat of a n00b.
I have a Novation Remote 25SL configured to use AutoMap with Logic Pro 8 from Novation's website and most things are working well. It's confusing at times because sometimes I find it hard to tell what mode the keyboard is in, but that's ok - it's the least of my worries. Based on what I've seen through reading the manuals and my own experimentation, I have a couple of questions:
- Despite what the guy at the store told me, I can't seem to figure out how to select different kits from within the SL. For example, if I have a garageband instrument selected on a track - can I use the data/select knob on the SL as it is now, or do I have to program that somewhere, somehow? Or if I have Ultrabeat on a track, can I use the knob to select the different kits/banks?
- Is there a way to control non-Apple AU plugins like the rest of those which ship with Logic? All the sexy looking ones like Ringshifter, Compressor, Overdrive, etc. It seems odd that Remote will go into Mixer Automap mode and be able to control the certain portions of the instruments, but not the plugins that are automatically loaded into the channel strip when the instrument is loaded.
- I have a 25 key Remote. In Ultrabeat, I find the key maps miss a chunk of notes between where the drum pads end and where the keyboard starts (or vice-verse). Is there a way to get it so each key has a mapping? 25 keys in Ultrabeat, 25 keys on the board plus 8 drum pads - seems like there's lots of room.
Thanks in advance for all your feedback.
Message was edited by: Jason Lixfeld

Follow-up research:
Apparently there is a driver conflict between the AlphaTrack and the ReMOTE. So far I have got the ReMOTE working - sort of - in Logic using the following method which was published at Novation's Answerbase:
1. disconnect the alphatrack.
2. launch Logic and then turn on the ReMOTE SL.
3. Go into the Environment window, and add a Monitor Object. Connect it to the Remote SL's ports 2 and 3.
So far, this seems to at least get MIDI note input into Logic, but the Automap function seems a bit sketchy so far. This will depend on Novation updating Automap and the SL's firmware for Logic 8.
As noted previously, there doesn't seem to be any AlphaTrack support in Logic 8 yet and it's up to Apple to make it work. They do support their TranzPort product, so with luck there'll be support in the next update.
I'd really love to use BOTH control surfaces with Logic simultaneously -- the AlphaTrack with the Mixer and plugins, the ReMOTE with Software Instruments. I suppose it might take some interesting mapping but this doesn't seem like that strange a setup -- there are plenty of "mixer surfaces" like the M-Audio one, and the Novation Automap stuff is quite popular....

Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11 ;)

Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11

If your info is correct you need to first buy Snow Leopard from the Apple on-line store ($20) install and update to 10.6.8 and then buy Lion from the App Store for $20.

Can i use my mini Mbox 2 with logic pro 9 on iMac os x lion?

Can i use my mini Mbox 2 with logic pro 9 on iMac os x lion?

Hi there,
Did you find out anything more in regard to this?
I have been using Pro Tools 8 with the MBox 2 connected to my iMac operating Leopard. It worked a treat for nearly four years.
However the hardrive has just been replaced on the iMac which now has Snowleopard. I don't want to have to update to Lion and then fork out £500 for Pro Tools 10.
I would be content to get Logic Pro 9 if I can attach the MBox 2 to it.
Your advice would be appreciated
PXC

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
Ken

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

Can I use digi 003 console with logic pro 10 ???

I have the new mac pro with new os mavrik and
I have the digi 003 console work with pro tools 10 perfect
I want to work with logic pro 10 and I don't know if it work with my digi 003 console
Please help me

Hi again Bill,
Something very strange has happened this morning. I was using Logic and thought 'I'll just plug in the TASCAM again to see if anything happens' and it just worked straight away. This is most peculiar as I didn't do or press anything to make it work. Yesterday when I was trying to get it to work, I closed the program and restarted the computer several times are making adjustmemnts but it just wasn't working at all. It seems a good night sleep has gievn it time to think things through lol.

Using Mackie Control with Logic Pro 7 and Yamaha O1X

I currently own a Yamaha O1x which is a mixer/control surface/audio interface that I use with Logic Pro 7. I am planning on selling the O1X and replacing it with the Mackie Control Universal as my DAW controller and using the Apogee Ensemble as my audio interface. I already have purchased the Mackie Control Universal and would like to begin using it instead of the O1X as my DAW controller, but while I am waiting for the Apogee Ensemble to be released I still need the audio interface capabilties of the O1X. The O1X uses Yamaha's MLAN protocol to connect to the G5. MLAN is a firewire interface that can transmit both audio and midi. Does anyone have a suggestion for a work-around solution so that I can use my Mackie Control Universal (which connects via midi cable) and only use the audio capability but not the control surface of the O1X via the firewire connection? I haven't been able to figure my way through this one and see if it is possible. I have already tried having them both hooked up at the same time, and the Mackie Control seemed to work fine but the audio on the O1X didn't seem to be connecting and functioning properly. I appreciate any help as I am anxious to use my Mackie Control.
Thank you!

You need to connect only the Audio and not the MIDI between your 01x and Mac. You can achieve this in mLan Graphic Patchbay-connect the cables between the Nodes in Audio part of a Graphic Patchbay, connect the Wordclock but do not make any MIDI connections. this way it should work as you want. the other way is to Make your regular connection from mLan Autoconnector and disable the MIDI ports that are dedicated to control the DAW by 01x by some freeware utility (01x uses port 1 for that...)
As this is quite 01x specific, please visit 01xray.com/forums where you will find more help, or send me PM.
As Apogee enssemble is expected to have great features, I would rather recommend the i88x instead of Enssemble (i88x has two Mic preamps-the best Yamaha produces (derived from Dm2000)VERY good converters (mLan is known for low jitter and it was tested with Rosseta by a mate from 01x forum who said (he tested it in store with other people) that i88x sounded better-may believe it or not...).The mLan Graphis Patchbay application allows you to patch connections between mLan devices and computer -very flexible. 01x already does almost the same as Mackie control and it is for almost the same price.... But maybe you are pi_ssed of waiting for new mLan drivers? I am just speculating....

Using a drawing tablet with Logic Pro, esp. for hyperdraw?

Is anybody using a drawing tablet, such as the Wacom Graphire 4, with Logic Pro? I am particularly interested to hear whether a tablet makes inputting hyperdraw data easier.
Thanx and cheers,
Vincent

Yeah, it changes everything — from selecting menu items, to turning knobs or moving sliders. You'll never go back... This is due to the fact that pointing and clicking are merged into one gesture, like playing a piano key takes care of selecting both the pitch and the velocity.
Be sure you get a small model though, not the big one that they use with Photoshop...
I find it indispensable whatever the kind of application I'm using, be it a text processor or an audio editor, whenever precise selection or action is required — to the point that I feel awkward when I'm forced to use a mouse.
By the way, people who are used to using trackballs feel the same — but this isn't true for track-pads.

Can I use a VS-700C control surface with Logic Pro?

Hi,
Does anybody know if I can use a Roland VS-700C control surface and/or VS-700R audio interface with Logic Pro?
Cheers,
Craig

If it supports the Makie protocol, it might work... but I wouldn't purchase one on that basis without trying it first.

Hi I am attempting to use a Zed R-16 with Logic Pro 9, how can I setup a bounce for output 17-18 this is where the mixer sums (the audio outputs on the zed come through 17-18)

hi I am attempting to use a Zed R-16 with Logic Pro 9, how can I setup a bounce for output 17-18 this is where the mixer sums (the audio outputs on the zed come through 17-18)
I would like to be able to quickly bounce down my mixes, through the Zed outputs.

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

Using Apogee One with Logic Pro X- Setup Help

Hello
Using-OSX Mavericks, Logic Pro X
I have a lot of experience with GBand, but I am new to Logic all together. When I plug in the Apogee One to use for recording guitar, I hear the clean guitar tone coming through the output. The only issue is I cannot tweak the tones at all using Logic's built in amps (or Amplitube). All I have is the basic, clean tone that the One provides upon connecting. I just want to use the One as a guitar interface, and I am sure I am just missing a basic setting that will allow me to change the tone using the program's built in amps. I have also tried changing the knob on the One unit itself (guitar, mic, etc) Any suggestions?

A suggestion.. Yes, the Logic manual
1. Make sure you have "Logics Audio Preferences" set up. (see link)
http://help.apple.com/logicpro/mac/10/#lgcpbb81aca5
Next, you want Software Monitoring on.
And Using the software control panel that came with the Apogee you need to make sure that "direct monitoring" through the interface is disabled. Direct Monitoring let's you hear what the audio interface is hearing, basically, your straight/clean guitar.
Software monitoring let's the signal be run through Logic but the Interface has to be chosen as the input. (see link)
Apogee may have another name for direct monitoring, some call it "low latency monitoring".

Using MBOX 2 with Logic Pro 8.

Similar Messages

Maybe you are looking for