Using MBP Late 2011 old RAM on MBP Late 2008

Hello,
I have two MacBook Pro, one Late 2008 (Model 5,1) and one Late 2011 (Model 8,2).
I know that the 5,1 can run up to 2x4GB 1066 RAM, but I'm wondering if i can use the 2x4GB 1333 RAM that came with my Built-to-order 8,2.
So, will the 5,1 force the 1333 DIMM to run as 1066? Or it's just not possible?
Also, if it is possible, will the 5,1 be under any restriction (such as running only OS X 10.6.6 or later, or something like that)?
Thank you!

You have to use DDR3 1066 DIMMs.

Similar Messages

  • I am using a late 2008 macbook and have recently purchased a WD Passport Ultra 1TB to use for storage.  I have formatted the drive and successfully moved files onto the drive, however now I am unable to locate the drive within FINDER. Please HELP!

    I am using a late 2008 macbook and have recently purchased a WD passport ultra 1TB drive to use as storage.  I have successfully formatted the drive, and moved files from macbook onto it, however now I cannot locate the drive within FINDER, even though it is showing within disc utility.  Please HELP!!!!

    Welcome to Apple Support Communities
    Open a Finder window, and your external drive should show up in the sidebar, under "Devices".
    A different way is to go to Finder menu (in the menu bar) > Preferences > General, and tick "External disks". If your external drive is detected by OS X, it will show up at the top right corner of Desktop, so double-click it to access to the content.

  • Late 2008 Mac Book Pro with Thunderbolt display: Compatibility

    I have a Mac Book Pro Late 2008 (15inch) and want to buy a 27inch thunderbolt display, because in the future I will buy a mac book air (thunderbolt)...
    but for now:
    1: Can I use my late 2008 MacPro with thunderbolt?
    1a:If yes, which functions work, which not...
    1b:If yes, how to connect? I do not have any cables so far
    1c:If yes, will my resolution increase on the 27inch or will I have the resolution of the mac book? What about the future Mac Book Air? Which resolution will be?
    2: If I cannot use it, is there any exchange program from Apple for old Macs against new ones? (Like for cars they have)

    I have a Late 2011 MacBookPro that I bought with the stock 5400 RPM HD.  Before I did anything with it, I replaced it with a Momentus XT drive.  In my Late 2007 MBP, I have used the original 160GB 5400 RPM drive for a few months before replacing it with a 7200 RPM (non XT) drive, and the difference was noticable, but not huge.  For me, the move from 7200 RPM to 7200RPM-Hybrid was noticable, but not huge.  I would say that you won't be disappointed by goign to a hybrid drive (as long as you get the 750GB version as some of the 500GB ones had firmware issues that caused nightmares for some Mac users.
    Now that I look more closely, you will probably see a fairly huge jump, as your existing drive is only negotatiating a SATA-I link, where the Momentus XT is a SATA-III drive, so it will be able to negotiate a SATA-II link to get the best performance of your controller.

  • I have a late 2008 macbook pro with a 2.4 GHz Intel Core 2 Duo processor and 2 GB 1067 MHz DDR3 memmory. Its starting to lag and is generally getting a little slow. It's running Mac OS X Lion 10.7.5. How can i "update" it or just improve it's efficiency?

    help

    zibiva,
    depending upon what you use your Late 2008 Aluminum MacBook for, you could increase your RAM from 2 GB to 4 GB or 8 GB; you could replace its hard disk drive with a SSD; and/or you could examine what software is currently in regular use, to see if any of those apps is contributing to the slowdown. If you haven’t done so already, you could download and install EtreCheck, and include the output from running EtreCheck in your reply, to see if anything there stands out as being particularly CPU- or RAM-intensive.

  • Im planning to upgrade my MBP late 2011's ram from 4gb to 8gb. Is there any specific brand of ram that i should buy or i can buy any brand that suits my MBP.

    im planning to upgrade my MBP late 2011's ram from 4gb to 8gb. Is there any specific brand of ram that i should buy or i can buy any brand that suits my MBP? im aware of all the details that i need to consider pc3 - 10600 1333MHz 4gb. i just want to know is there any specific brand or i can use any brand,
    Thank you.

    The most reliable sources for Mac compatible RAM are OWC and Crucial.  Macs seem to be selective with RAM so some brands will not work. Make certain that you get RAM with the exact specifications that apply to your MBP.
    Ciao.
    If you have a need, be advised that you MBP can actually support 16 GB RAM.
    Message was edited by: OGELTHORPE

  • Edge RAM fails on late 2008 MBP Unibody

    I recently decided to upgrade my late 2008 unibody MBP (2.53 GHz) by adding a 7200 RPM drive and bringing the RAM up to 6 GB, the total this machine will hold. The drive upgrade went fine, but the Edge RAM kept throwing kernel panics. I finally put back the original 2 GB stick and everything returned to normal.
    I don't actually think there is anything defective about the Edge stick, I just think it's just not compatible with this computer even though it is labeled that it should work. I'd like to know if anyone has successfully upgraded the RAM on their 2008 MBP that's the same model as mine (see above) and if so, what they used.
    In advance, thanks!

    Some people here will tell you to buy only "X" brand, but actual reliability studies have shown that it doesn't really make that much difference. The failure rates are pretty much the same regardless of manufacturer. It's OK to shop for price rather than paying higher prices for a so-called well known brand. The key is to buy from a vendor you know is reliable and provides a reasonable return policy in case you get a bad piece. It happens. And only buy a product with a lifetime warranty. Stay away from so-called "economy" RAM that only has a 90-day warranty.
    Macs are not that finicky in my experience. I've bought lots of different kinds of RAM for more than a couple dozen Macs. I've never had a problem. But sometimes problems do arise. You get a marginal module that won't pass the system's POST test.
    If you want a reliable source I recommend Data Mem. I've dealt with them for 20 years. I've no complaints. I always buy computers with a minimum RAM configuration and do my own upgrading. Thus far I've upgraded the RAM in seven Intel Macs without incident, and I've never bought "brand" RAM. But then that's me. If you prefer the "brand" crowd they usually recommend Crucial. Apple mostly uses Samsung in the new computers. And there's Hynix which is also a big brand manufacturer like Samsung. But the big memory manufacturers also sell unbranded RAM or RAM that is OEM branded.

  • Mavericks install failed on my late 2008 MBP. Says I should contact the software provider. Want to do a system restore, using Time Machine, but latest date to use is from last year - even tho did a backup before the download?

    I downloaded the free Mavericks upgrade to my late 2008 MBP on Friday.  I made sure to plug in my external hard drive so that Time Machine could back up beforehand.  (I should say I'm not clear about the different kinds of backups that Time Machine does - I just plug it in and let it go.).
    So have tried several times over the weekend to install, it takes 46 minutes each time - only to tell me it can't do it.  There was an error message of needing to contact the software provider (or something similar).  After searching the internet (on my husband's computer - since my MBP is rendered useless right now) I decided maybe I should wait on Mavericks and just do a system restore.  However, when I plugged in the Hard Drive and proceed to System Restore, the latest date available is one from September of 2012 (14 months ago)...  I've wondered if the date might be wrong?  But I'm afraid to choose it because I'm not sure what I would lose.  It might take me back to Snow Leopard rather than Lion... (however, the version on Restore was 10.8.1 which is Mtn Lion, right?  Even tho it was last year...)
    Some sources online say that I should go into applications and delete the install -- but I can't get to anything on my computer. 
    I tried to do a reboot in safe mode - but not sure if it worked... 
    I did look on the installer log error and the latest error is: 
    Local Host  Report crash [378]
    Can anyone help me?  (Using simpleton, non-techie language?
    Thanks

    I downloaded the free Mavericks upgrade to my late 2008 MBP on Friday.  I made sure to plug in my external hard drive so that Time Machine could back up beforehand.  (I should say I'm not clear about the different kinds of backups that Time Machine does - I just plug it in and let it go.).
    So have tried several times over the weekend to install, it takes 46 minutes each time - only to tell me it can't do it.  There was an error message of needing to contact the software provider (or something similar).  After searching the internet (on my husband's computer - since my MBP is rendered useless right now) I decided maybe I should wait on Mavericks and just do a system restore.  However, when I plugged in the Hard Drive and proceed to System Restore, the latest date available is one from September of 2012 (14 months ago)...  I've wondered if the date might be wrong?  But I'm afraid to choose it because I'm not sure what I would lose.  It might take me back to Snow Leopard rather than Lion... (however, the version on Restore was 10.8.1 which is Mtn Lion, right?  Even tho it was last year...)
    Some sources online say that I should go into applications and delete the install -- but I can't get to anything on my computer. 
    I tried to do a reboot in safe mode - but not sure if it worked... 
    I did look on the installer log error and the latest error is: 
    Local Host  Report crash [378]
    Can anyone help me?  (Using simpleton, non-techie language?
    Thanks

  • Macbook pro 13' late 2011 4GB RAM...using lot of RAM

    macbook pro 13' late 2011 4GB RAM...using lot of RAM
    I have attatched screenshot...please help...sometime free memory is only 15 or 20 mb and i have to restart...after restart it works fine for 10 to 20 minuts

    its very easy to do, here are step by step instructions with photos

  • When I use my 5 year old MBP on battery it suddenly shuts off when the battery life reaches 88%.  Anyone know why and how to fix it?

    when I use my 5 year old MBP on battery it suddenly shuts off when the battery life reaches 88%.  Anyone know why and how to fix it?

    Model Information:
      Manufacturer:          Sony
      Device Name:          ASMB012
      Pack Lot Code:          1
      PCB Lot Code:          0
      Firmware Version:          110
      Hardware Revision:          500
      Cell Revision:          303
      Charge Information:
      Charge Remaining (mAh):          4108
      Fully Charged:          Yes
      Charging:          No
      Full Charge Capacity (mAh):          4200
      Health Information:
      Cycle Count:          40
      Condition:          Service Battery
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          12361

  • Can I use my old Macbook Pro Ram in the New Macbook Pro (late 2008)

    I have 2, 2 gig DDR2 sticks of ram in my macbook pro. I wanted to know if they would work in the new macbook pro (late 2008)? I know the new one uses DDR3 - What would be the downside of using DDR2 in a DDR3 macbook? Would the graphics cards work to their potential? Thanks!

    No. The DDR2 RAM in your older computer is not the same as the DDR3 RAM used in the new ones. There are significant differences between them not the least of which is pin count.

  • Could the late 2008 MBP take more than 8GB of RAM?

    I just recently upgraded the RAM on my late 2008 15" MacBook Pro from 2GB to 8GB, and this sucker's running like a sports car!    So this has me wondering.  I have babied this thing, and it is plenty powerful for me but what happens 2-3 more years down the road?  I had read that the late 2008 models originally could only handle up to 6GB but do to a fimware update in April of 2010 that capacity was upped to 8GB.  Is there ever a chance that the RAM capacity could go up again?  If not, why?

    you're probably stuck at 8GB - i wish i can upgrade my late 08 Macbook to more than 8GB - tried it, but never worked - gave it to my niece instead.
    i don't really think you'd use more if you're just running normal apps.
    have a look at the image below - that's my macbook with 16GB and have 9 apps running - see how much I have free?
    by the time you need more than 8GB - you'll probably buy a new macbook by then - do remember, new macbooks are still selling with 4GB of RAM installed in them.
    good luck

  • Replacing Airport Extreme Card in Late 2008 MBP - What to buy??

    I've limped along for about 2 years now with my wifi constantly dropping while everyone else has a strong, constant signal. Doesn't matter where I am, it's always dropping and takes ages to reconnect. I've tried everything advised on the forum etc and am now about to buy something else as my main machine. I don't want to get rid of my MBP though so am planning on installing new memory and hard drive and while I'm doing that, want to replace the airport extreme card. The MBP will then become my secondary machine.
    Problem is, I can't figure out what I need to buy to replace the **** card! Seems like a lot I'm finding are either for machines that never had cards or for 2009 or newer. I just need to know which card to buy.
    OR . . . hearing that they are a pain to get to (keeping in mind I'll have the guts exposed while I upgrade the memory and HD) and fiddly . . . is there something external to plug into a USB I should get instead?
    Here are my specs:
    MacBook Pro, 15" Late 2008 (Unibody)
    2.4 Ghz Intel Core Duo
    2 GB 1067 Mhz DDR3 (which I'm about to upgrade)
    Mac OS X Lion 10.7.4 (11E53)
    Card Type:
    AirPort Extreme  (0x14E4, 0x8D)
      Firmware Version:
    Broadcom BCM43xx 1.0 (5.106.198.4.20)
      MAC Address:
      Locale:
      Country Code:
      Supported PHY Modes:
    802.11 a/b/g/n
      Supported Channels:
    1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
      Wake On Wireless:
    Supported
      AirDrop:
    Supported

    I'm already upgrading to 8GB of RAM and I'm planning on adding a Solid State Hard Drive since it will be a secondary machine. I really don't want to replace the optical drive too. At that point it's got new components in an old chassis with an old CPU.
    I've been to the Genius Bar (back when I lived in a place where there was one in town) and they couldn't replicate the issue but as soon as I left it started up again. There are times when it holds the signal for a good hour or more or days like today when it's dropping it every few minutes. It's completely random.
    No. This girl is going to go build her own PC with a fantastic GPU so as to kick some Diablo butt and the old Macbook Pro will only get used when I don't need it for anything serious. And I am most certainly not dropping another $2k + on a new MBP no matter how shiny they are! It's the end of an era as I've been using Macs exclusively for over 10 years now.

  • SSD Upgrade to Late 2008 MBP, Plus Windows 8 Install

    Hi guys,
    I have a 15", late 2008 MBP that was a beast in it's time, but has started to show it's age, especially due to my aging hard drive.  I've read great things about performance improvement through installing an SSD, and so I want to perform this upgrade.  Also, while I do have my computer backed up through Time Machine, I'd rather just be proactive on replacing my hard drive before it fails on me (which will definitely happen at some point).  Here's some more detailed specs for my computer:
    CPU: 2.66 GHz Intel Core 2 Duo
    RAM: 4 GB of 1067 MHz DDR 3
    GPU: NVIDIA GeForce 9600M GT 512 MB
    Note about the GPU: This comp has the dual graphics chips, but I've been always using the "high-performance" one, which is what is listed above (the other one is a GeForce 9400M).
    OS: Most current version of Mavericks (OSX 10.9.2)
    In looking up SSD's, I've found that people that have had laptops with similar specs to mine have had success with the Crucial M500 SSDs.
    After I get my drive all figured out, I want to use Boot Camp to install Windows 8 on the SSD.  Currently, I do not have any Windows installations on my computer.  My computer is not supported for Windows 8 installation through Boot Camp, despite the fact that hardware-wise, it is compatable with Windows 8.  However, I have found discussions that are pretty standard on how to get Windows 8 installed on my computer.
    -So, my first question is: Was my research good for this given SSD for my computer?  It seems like Samsung makes the best SSDs, but I haven't found any evidence that it would be really compatable with my computer.
    -My second question: Given that I will have just installed an SSD, will Windows 8 installation be doable?  This is probably the most important question for me, because if it's not possible, then I'd rather just buy Windows 7 right off the bat and install that in boot camp instead.
    -My third question: If I can get Windows up and running, how does my computer's double graphics chip configuration work in Windows?  I'd want to make sure that Windows is using the more powerful of the chips and not the less powerful one.
    -My fourth question: My computer has gone from Leopard to Snow Leopard to Mavericks, and I never performed a "clean install" for any of these OS upgrades.  If I clone my HD to the SSD, would it be beneficial for me to run a Mavericks clean install, and then pull all my necessary data off my backup drive?
    Sorry for the long-winded post, and I know much of it is demonstrated elsewhere.  I have found many discussions involving SSD upgrades, and getting Windows 8 on a late 2008 MBP, but I haven't found anything that has shown both being done.  Both seem easy to do, but I just don't know if doing both in tandem is going to cause a bunch of problems.  Has anyone out there done this, and can anyone offer me any advice on how to make this process any smoother? I really like doing this upgrade now, because if I run into Windows issues, or other issues on the SSD, I could still just boot from my old hard drive and use my computer.  Thanks everyone!

    beestmode,
    I have a Mid 2010 MacBook Pro, and I put a Samsung 840 PRO SSD into mine. Where did you find evidence that this model SSD would not work in your MacBook Pro? (The SSD which you’ve installed has a good reputation, so you should have no reason to regret your choice.)
    Windows 8 via Boot Camp will not be possible with your model MacBook Pro. In Boot Camp, you could install up to Windows 7, either 32-bit or 64-bit. A virtualizer such as Parallels Desktop or VirtualBox could allow you to install Windows 8, but virtualizers have their own sets of positives and negatives.
    Since I have a 13-inch model with only one GPU, I don’t know how your dual GPUs would be handled on the Windows side.
    When I’d installed my SSD, I did a clean installation of Mavericks onto it, keeping Snow Leopard on my old internal disk, and putting it into an external enclosure.

  • Advice on used mbp for photo/ video tasks.

    Good afternoon everyone. I'd just like to pick the brains of some of the experts here regarding purchasing a used mbp for photo/ video. for about $1300 (preferably less) which models would you look at? I'm open to 15 and 17 inch variants. The 13 is just too small. I've been trying to find a 15" with 2.4ghz and 16gb ram but they are very hard to come by in my price range. Is there going to be a huge difference in speed between a 2.2, 2.3, or 2.4 i7 quad core processor? I'm also aware that some models came with superior graphics cards although I can't remember exactly which ones.
    one more question, regarding the high res matte screens, are these going to make my guis look weird? I actually had a 2014 13" mbp retina and was hugely disappointed in its performance and took it back. The retina display was not compatible with photoshop And made it look awful. This happened with some web pages as well. Is this going to happen with the high res screens available previous to the retina technology?
    Thanks in advance for any help and suggestions.
    One last thing. Am I better off waiting/ spending a few hundred more and looking at more recent units such as a 15" retina? I don't like that the ram can't be upgraded and that they can't be repaired by the user as easily but the lighter weight is certainly a nice feature.

    I suppose what I'm asking is whether there are particular configurations that were better than others that I should look out for. you illustrated my point when you mentioned your friend's older but faster mbp. I believe sometimes there are configurations that seem to work better than others despite one being newer or having 'faster' or 'superior' hardware. I'm aware of the advantages of ssd's and had one in my last mbp along with maxed out ram.
    Regarding the newer mbp 13 retina model my solution was to take it back. I simply was not happy paying more for a computer that was more expensive but didn't perform as well as my older model I had just sold. Also the size was not going to work.
    Out of interest can anyone explain these anomolies in speed between newer and older models. Logic suggests that a newer model with faster processor and more ram should be faster but why is this not always the case?
    Here's my predicament: 15" mpb with 2.4ghz i7 quad core and 16gb ram and ssd are running around $1400 used. This is more than I would expect to pay for a mid to late 2011 laptop but they seem to hold their value very well. There is a significant price jump between say a 2.2ghz model and a 2.4. Am I going to notice more performance on the 2.4 or is it not a big deal to save a few hundred bucks? Or do I just spend a few hundred more for a newer retina model? I just don't want to end up with a computer I cannot upgrade or work on myself and that is not a significant performance upgrade from my last model And doesn't even have a SuperDrive or additional HDD. I hope that makes sense.
    So with all that said and considering that I use my laptop for photography and small amounts of video are there any particular models anyone would recommend Around the $1300 mark? Or other suggestions?

  • Late 2008 mbp - installed new ssd - trying to boot from snow leopard iso on flash drive - says 'cannot install mac os on this computer'

    Hello -
    I just installed a new M500 Crucial ssd in my late 2008 mbp - everything was working fine on old hard drive (running snow leopard) but was getting slow and wanted to upgrade - i lost my snow leopard disk when moving from hawaii so i found an iso online - using a flash drive i partitioned the disk and made the bootable image on flash drive - formatted as extended/journaled - switched out the hard drives - plugged in the flash drive - started the comp - held option - install begins to boot - choose language - all is fine - choose english - next step window pops up saying 'cannot install os on this computer' - click on utility but all options are greyed out - disk util is greyed out - only options it gives is to start from backup or restart - real confused here - all help appreciated - thanks in advance and happy new year!

    Snow Leopard comes in discs only.  The USB drive may be a counterfeit and/or corrupt.  There are two options for you: 
    Get replacement original OSX installation disks from Apple customer service.  Have your MBP serial number ready and there is a charge.
    Or two, purchase a Snow Leopard disk from the Apple online store:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Ciao.

Maybe you are looking for

  • How to generate parent node id and child node id from xmltable ?

    Hi All, Below is a part of the xml data which is loaded in a table. I need help in generating the parent id for compensationReference say for the first occurence of compensationReference node it should be 1 and for subsequent nodes 2,3,4,.. Can some

  • My i tunes wont recognise my i pod

    Recently my i tunes has stopped recognising my i pod when I plug it in which means I can't transfer any songs I've bought or manage any of my music! Any ideas? I have tried re-setting my i pod but this still doesn't make it work. My computer recognis

  • Drawing - ID CS3 - suddenly text frame edges print . . .

    Think it happened when I placed a .5 border around the whole page, there's probably 25 or 30 frame boxes on page - how do I get rid of the boxes printing?

  • Standard Interface for CRM System

    : What standard interface does the CRM system expose to XI? For e.g. Standard IDocs or BAPI? If yes give details about the same. If NO standard IDocs / BAPI are available then do we need to write one?

  • Captivate advances when wrong click box is clicked

    I have a simple slide with 5 weblinks. I need the slide to stay on screen until a user clicks a specific button to continue but that allows them to select any of the others (weblinks) before doing so - this is what I setup... - Clickboxes were arrang