Using MBSSID - new 1252 wireless APs not letting hosts connect

Solution:
After spending a few weeks working with Cisco in trying to figure out why new 1252 APs weren't getting a DHCP address from our Juniper SSG5 firewall (on different VLANs for each SSID), I finally got to a Cisco tech who knew the answer, so am posting it here to perhaps help someone else.
Using MBSSID, according to the first tech, only one can be in open authentication mode (e.g. no WEP, WPA, etc.) You can have multiple SSIDs that utilize the same method of authentication, just not more than one of them open.
Using MBSSID, on some wireless NICs that are apparently somehow sensitive to it, only one SSID can be in guest/broadcast mode. This ultimately was the solution to our connectivity issue.
It would be good to have documented what those NICs are that experience this problem.

gcgeorge wrote:
Hi Fiedi,
     Thanks for you reply.
     The guests are both configured to use a bridged adaptor on the wireless adaptor.
     I am currently using the rac1-priv IP address (192.168.0.101), and it does not work. If I try the public or VIP addresses, they do not work either - presumably since they are on a different subnet.
     Thanks
     Gavin
You will not be able to connect through private network as there isn't listener listening in that IP.
Try change your wireless IP to network 192.168.2.x and try to ping the guests public IP
Cheers

Similar Messages

  • My new iPhone 5s will not let me type using the keyboard, has anyone else had this issue?

    My new iPhone 5s will not let me type using the keyboard, has anyone else had this issue?

    The iPhone 5, the Wall Charger, and the Lightning Cable are all covered by the 1 year Warranty. Make Genius reservation and take all 3 to Apple so the problem can be sorted and resolved.

  • My ipod touch will not let me connect to the itunes store and i am using a wifi connection

    My ipod touch will not let me connect to the itunes store and i am using a wifi connection

    allison i had the same problem to but then i figured out! You have to put in a credit card number so you can purchase a game thats free or 0.99 cents or higher then you have to fill in other stuff then press next on your ipod touch or computer then it says you have succesifully created an apple id! And i hope this information will help out!!

  • HT1443 I need to upgrade from 10.5.8 to 6.0 or better to use a new HP wireless printer.  How do I find the right item to download?

    I need to upgrade from 10.5.8 to 6.0 or better to use a new HP wireless printer.  How do I find the right item to download?

    There is no download; you need to buy a Mac OS X 10.6 DVD.
    (83218)

  • I am trying to use Photoshop 10. After my catalog loads. I am told to log into my account. My user name is correct and I use a new password. That password lets me log in to my Adobe account and even allowed me to loadp

    I am trying to use Photoshop 10. After my catalog loads. I am told to log into my account. My user name is correct and I use a new password. That password lets me log in to my Adobe account and even allowed me to load a 30 day trial of PS14i After I enter  the password I am never allowed to go any further, What do I need to do to get into my catalog?

    I regret that you're having trouble setting up your email, corbad! You're on the right track with your incoming email address. You might also try incoming.verizon.net or incoming.yahoo.verizon.net as possible alternatives, and 995 as the port number. Please let me know how that goes!
    DionM_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • Just bought pro with new os installed - will not let me run install disk for lexmark printer

    just bought pro with new os installed - will not let me run install disk for lexmark printer?

    Is that disc for Mac systems or Windows ?
    I suggest you visit Lexmark web site and download and install drivers for your exact printer manually.

  • I have a Netgear NAS which uses  Stora software. Mavericsks will not let me install the software as it is not from an approved developer. Is there any way around this?

    I have a Netgear NAS which uses  Stora software. Mavericks will not let me install the software as it is not from an approved developer. Is there any way around this?

    There is, but why do you need the s/w installed? The NAS should have a web admin interface, accessible via ip address (http://<ip address>) which should allow all the needed configuration that is required for it to work with machines running os x.
    Try to install as little s/w as you need to do something in Mavericks or any OS as it is usually the cause of future issues or problems.
    If you're intent on installing the s/w, go to System Preferences > Security & Privacy > General and If you have tried to run it before, it should be listed there. You can then "un-block" it should you wish.

  • I can see my wireless network,but my ipod4 will not let me connect to the network?

    I can see my wireless network, but my ipod4 will not let me connect to it. When I try it tells me that it is unable to join. I can access the network on my laptop fine. I am also having trouble with connecting my ps3. It has the exact same problem. Can anyone help me?

    The ps3 problem tends to indicate a router problem.  Have you powered off and then back on your router?
    For the iPod try:
    - a reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Reset Network settings: Settings?|>General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • TS1398 I have a new ipod it well not let me go to my wifi with my password

    I have a new ipod it well not let me connet to my wifi with my pass word??

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • How do I get ISO 7 off it will not let me connect to the WFI on my router.

    At my church I have a rounder and it will not let me connect to it. I was able to get on before I download the ISO 7 to my iPad and now it doesn't work. What can i do to get the ISO 7 off the iPad. Thanks Brenda. Clark

    Go into settings and reset all network connections. Then restart your device by holding the power and home button until the Apple logo appears. You will not lose any data. When the device restarts connect to your wireless network.

  • My ipod will not let me connect to my wifi...

    My ipod touch 5 is not letting me connect to the wifi.  I have wifi at home through WOW and it has always worked.  As of yesterday it hasn't worked.  It won't let me connect.  We do have 2 laptops and its letting me go on the wifi through them.  Please let me know what i can do.

    Does the iPod connect to other networks?
    Try:                  
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • EA6350 not letting me connect to Rockstar Game Services

    I managed to buy an Xbox One last Saturday with a free copy of GTA V. As I finally finished setting up the Xbox and installing GTA V, I would get an error stating that I couldn't connect to the Rockstar game services. I checked their server status and it was working fine and my friends were playing online as well. I tried searching online for answers and apparently I managed to resolve it by changing my DNS settings from my ISP to Google's DNS. I had to disable IPV6 on my router since it kept changing the primary DNS on my Xbox. I added Google's DNS on the static DNS 1 and 2 fields on the DHCP Server options. In the end, Google's DNS worked perfectly until today, I'm still on Google's DNS and it would not let me connect to Rockstar's servers. Switched to OpenDNS and the same issue occured. I tried to reset my alternate MAC on my Xbox and it still wouldn't work. I've tried every other solution on their page and it makes me assume that it is my router that's the issue. What can I do in order to have my router be able to connect to Rockstar's servers? Any other online game works fine except GTA V and if I use another internet connection, GTA V works perfect except when I connect to mine. 
    (On a side note, ever since I disabled IPV6, the "edit" option won't show anymore when attempting to edit the type of internet connection located at the Internet settings tab, any reason why?)

    Spent the whole day attempting to fix it. Resetting the router did nothing and I still wasn't able to open any of Rockstar's websites within my network. My Xbox still won't let me connect to Rockstar game services since I keep receiving the error where it states that "The files required to play GTA Online could not be downloaded from the Rockstar game services." Any ideas? I really don't know what else to do and it's driving me uts.

  • How do I disable firefox off line it will not let me connect to the web

    how do I disable firefox off line, it will not let me connect to the web

    Go into settings and reset all network connections. Then restart your device by holding the power and home button until the Apple logo appears. You will not lose any data. When the device restarts connect to your wireless network.

  • I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help?

    I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help? I am not that technically inclined and really simple terms  are appreciated.

    Try downloading the songs from a different device. If you are doing it from your iOS device, try form your computer.

  • So, I have created my home sharing from my base computer to my laptop. On my lap top I see the tab for home sharing but it will not let me connect to my computer to share my music over. I have done everything iTunes has told me to but it still won't work.

    So, I have created my home sharing from my base computer to my laptop. On my lap top I see the tab for home sharing but it will not let me connect to my computer to share my music over. I have done everything iTunes has told me to but it still won't work. Any help would make my day...

    I got some more info that may help.
    I put a cd on my laptop, and was able to share it to my computer... So the problem is only from my computer to my laptop. I tried the firewall thing and it did not help. I read the rest of the trouble shooting page, and nothing else applies. iTunes is an execption and already was. I can not think of anything else being my problem. Do you think I should re-install iTunes or would that be a waste of time? At this point I am about to just call Apple for some help because I am getting to stressed over this.
    Thanks

Maybe you are looking for

  • Running a Batch File using Auto Scheduler in HFM?

    Hi, Can we execute a batch file or run a macro or execute a VB script using the auto scheduler in Task Automation in HFM?? Abhishek Edited by: user10378700 on Sep 30, 2008 7:18 AM

  • Problems on selecting views with french characters into column names

    Hi All, I have views with column names such as "Détermination Planimétriq" or "Année de construction:*"; I can get in my c# function this columns names from ALL_VIEWS dictionary table, but if I try to make a selectionby use of an OracleCommand, Oracl

  • Mavericks 9.1 Bugs

    After upgrading to Mavericks 9.1 this morning, I noticed some issues right off the bat: Deleting items off the desktop now requires a password for every file being deleted. The trashcan doesn't update its graphic to show it has items in it, but displ

  • Purchased missed

    Hello sir , I Would like request my credit because two days before I purchased in fring credit sir but still cannot credit sir Your receipt No.119043073492 fring no ; +919677781515 Thanks sir

  • Importing song ratings from Music Match.

    I am new to iTunes. I am trying to switch from Music Match to iTunes in preparation for buying my 1st iPod (Nano). It seems that my song ratings from MMJB do not transfer into iTunes. Should these ratings transfer and I am just doing something wrong?