Using Microsoft Security Essential as Enterprise security solution and deploy via domain policy

hi, All,
I am trying to deploy Microsoft Security Essential in a enterprise via domain policy, and met following questions ,Would anyone help?
1. Is Microsoft Security Essential the right choice for enterprise security protection solution and if Security essential will cover enterprise security scenario in future? It seems Microsoft had Forefront Endpoint Protection as enterprise security
solution but it was deprecated.   While, Security Essential is mainly target for consumers.
2. I can extract msi from setup.exe, but is there an official MSI version of Security Essential? Is there any document about the MSI parameters? 
3. Is there a domain policy template(admx) for Security Essential?
4. As Security Essential has x86 and x64 versions. and it has built-in in win8. How would I make sure
         x86 computers install x86 msi of security essential.
         x64 computers install x64 msi of securit yessential.
        win8,win8.1 computers ignore the installation request.
        through  Group Policy Editor > Computer Configuration > Software Settings > Software Installation > New > Package

Hi
You are correct, Microsoft Security Essential is not for Enterprise use.
Technical you can deploy it but its hard to manage central.
Microsoft Enterprise solution for antimalware is System Center 2012 Endpoint Protection which is included in System Center 2012 Configuration Manager.

Similar Messages

  • I still get a firefox security alert that my system affected by numerous virus attack even after I performed a full scan using microsoft security essential. what is the problem?

    I get a firefox security alert that my system affected by numerous virus attack. I performed a full scan using microsoft security essential immediately but same message still pop up after that even though no virus was found during the scan.

    You may be visiting a web site that has been infected or is hosting malware.<br />
    You should never respond unrequested pop-ups that try to persuade you to download and install software.<br />
    Doing that is the way to get malware because no decent company would use such methods to inform you about that.<br />
    You only saw an animation and not a real scan.<br />

  • Client Security Solution And System Key Recovery

    Hey,
    I have an IBM ThinkPad T40 2373-82M Laptop. Everytime Windows starts up Client Security Solution displays a box which is prompting me to enter a password of some sort for authentication. It indicates at the top of the window that the reason for authentication is 'System Key Recovery'. If I click the 'OK' button it brings up another window indicating that authentication has failed and that the security key could not be recovered. I do not recall ever entering a password in the Client Security Soultion programme or anywhere else on my laptop. I am not the first owner of this laptop and I am wondering if the previous owner may still have his/her password in the system? Is there any methid for which I could reset/restore these key's?
    Any help is appreciated.
    Cheers
    Ash

    Thanks for the reply.
    I must say I have read various issues on the web regarding this particular software buddled with Lenovo T series and although I will be uninstalling it I do not believe there is any support on this whatsoever. Too bad cause I did want to use it ...

  • Client Security Solution and Office 2010's Word and Outlook

    I purchased my system June 16, 2009 with Vista downgraded to XP Pro so I was not able to purchase a upgrade disk from Lenovo to upgrade to Win 7 (deadline was June 22). This week I purchased the Windows 7,retail  64 bit Home Premium upgrade package at a local store.
    I did the upgrade (clean install) Windows 7 64 bit Home Premium on my ThinkPad T400 type 2764-CTO. Also successfully installed all Win 7, 64 bit ThinkVantage software with System Update 4.
    I manually Installed the file z909zis1032us00.exe Client Security Solution 8.3 for Windows 7 (64-bit only) Version: 8.30.0032.00 Note: When upgrading from Windows XP To use TPM with Win 7 erase TPM in the BIOS configuration utility. In the Security and Security Chip menu, locate the option to clear the security device referred to as Security Chip and clear. If not done you can install but not use the program.
    Then I had this issue with Client Security - Password Manager version 8.30.00.32.00 and Office 2010's Word & Outlook. This was before I spotted a tread with the same issue between Password Manager 3.20.0320.00 and Office 2007.
    I noticed that whenever I run Word 2010 or Outlook in conjunction with Client Security SolutionI I could not select text. I could no longer use CSS because of it...
    I called Lenovo and was told that they do not support retail version of Win 7. (Remember they refuse to sell me their version a week earlier). Because I dint know what to do, I deactivated the TPM in Client Security and it solve the problem in both Word & Outlook.
    On the following automatic System Update at the Lenovo site the system pick up something was wrong with Client Security (it did not when the TPM was activated???) and offered to download and install "Client Security Solution Office 2007 Patch 64bit". I did and following installation I re activated the TPM. The problem in Word & Outlook was no longer there.
    Then on the next system update the system offered to download and install "Patch for IE crash with Password Manager (Win7) version 1.0". I had not experience that problem but downloaded and let the system install it anyway.
    So the problem is not restricted to version 8. 3.20.0320.00 and Office 2007 as reported in the other thread. Because the patch was automatically downloaded fron the web site (Client Security Solution Office 2007 Patch 64bit)  I do not know if it is the same patch the was offered in that thread.
    I hope this will help other people having the same problem.
    Claude

    Hi All,
    May i know the version of the CSS? Is it Windows 7 CSS 8.3 ? 32 bit or 64 bit? Would love to know more in detailed for i could report to the development team.
    Thanks!
    Regards,
    Cleo
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • I am using Microsoft OUtlook Web Access for work email and I am losing functionality. What do I do?

    I use Microsoft Outlook Web Access for work emails when not at the office4 and I cannot/do not have any options to enlarge text or change fonts, etc. What do I need to do to make it work as if IE were my default browser?
    Thanks.

    Outlook Web App (new name) on Exchange Server 2010 should be quite full featured. The Outlook Web Access supplied with Exchange 2003 didn't offer a very good experience for browsers other than IE...
    Could you describe where the problem with fonts is: when composing messages, or when reading/working with the UI?

  • I don't have the authority to download Adobe Flash Player. I'm using Microsoft Security Essentials. HOW DO I FIX THIS?????

    I go to download this and it goes it install but then gives me error message: don't have authority to download.

    Hi Lezotte, are you using this site for the download: https://get.adobe.com/flashplayer/
    This page also has a download for the latest player (but I don't know whether it will work any better): https://www.adobe.com/products/flashplayer/distribution3.html
    Would it be possible to capture a screen shot of the message you're receiving, or give the exact wording (so it's easy to search)? This article has tips on screen shots: [[How do I create a screenshot of my problem?]] Please delete or blur any sensitive information before attaching the image to your reply post.

  • I cannot use Microsoft Hotmail with Firefox 3.6.24 and Windows 7. I click on an email but nothing happens. I did not have this problem with Windows Vista. Any solutions would be greatly appreciated.

    The Windows 7 is on a new Dell Inspiron desktop. The Windows Vista is on a Dell Studio laptop that I have had for a while. The Hotmail also works fine on the new computer when I use IE9.

    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    # Shockwave Flash 10.2 r152
    # Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
    *http://www.mozilla.com/plugincheck/
    Update the Flash plugin to the latest version.
    *https://support.mozilla.com/kb/Managing+the+Flash+plugin
    *http://kb.mozillazine.org/Flash
    *http://www.adobe.com/software/flash/about/
    Update the Java plugin to the latest version.
    *https://support.mozilla.com/kb/Using+the+Java+plugin+with+Firefox
    *http://kb.mozillazine.org/Java
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

  • Client Security Solution--and Password Manager--no longer autoruns

    My T61 was working wonderfully until recent installation of antispyware, antivirus programs.
    Prior to that, on boot, I could always see a brief CSS splash screen, and, more importantly, Password Manager would always kick in automatically, to load password data or to ask if I wanted it to remember something.
    Now, although Password Manager remains an icon in the system tray, it not only does not detect need for input, hotkeys do nothing, despite being marked enabled.
    I downloaded CSS 8.1 from the website (although this was still installed), and ran the "Repair", but still no joy.
    Your help is greatly appreciated.

    Thanks again--as you suggested, a thread well worth reviewing.
    In my case, I opted for the Rescue and Recovery Quick Restore--albeit with much fear and trepidation, since, unlike the roughly equivalent MS System Restore, this feature does not tell the user the date of the restore point that is being recreated.
    As it turned out, this took me back to a point when Norton Internet Security was only partially removed--which created the added anxiety of (a) inability to connect to the Internet through Explorer or Outlook 2007 and (b) inability to launch any Office 2007 program!  (That last caused yet another twist, since the instructions I had previously followed to completely removed Norton were now saved as .docx files....)  Although Norton Internet Security was still present on the desktop, and ccApp.exe was obviously running (and unable to shut itself down on Restart), Add/Remove Programs (the first step in the removal process) would not work--"the module is missing."
    Fortunately, I was able to download the Symantec Removal Tool through another computer onto a USB drive, copy the program to the T61, and run it there.  (Note that although Explorer would not load fully, Internet access of a sort was still available as witness System Update and Microsoft Update downloading without difficulty--though MS could not complete installing updates for Office 2007 with Norton still in the picture.  This matters because the Removal Tool accesses the net.)
    Once Removal had done its thing, Explorer, Office 2007, and Password Manager again worked as before.
    Sadly, I still don't know what the necessary ingredients for CSS/Password Manager are--there ought to be a listing of what files these otherwise excellent programs require.  And I'm not sure what approach to firewall, antivirus, and antispyware I ought to take, given the possibility that the programs I replaced Norton Internet Security with caused CSS/Password Manager grief.
    Sigh.

  • Downloaded Microsoft Security Essentials and Flash Player Quit Working

    Hi, i am running Win 7 (64bit), and recently got MSE as my only antivirus. Once i downloaded it, flash player files in youtube and other sites (even pictures you can click and zoom on) refuse to load and just lock the browser. This is happening in IE and FireFox. I am running flash player 10.3.181.22. I do not get an error message, just a frozen browser. I have restarted browser, computer, and router and still am getting the issue. Any help on this issue would be great!

    Hi, in addition to what Pat has suggested, what Anti-Virus program(s) did you have prior to MSE? Did you have a clean Uninstall of those? If you only removed them from the Programs & Features, some of them don't Uninstall all from the various files. Most Anti-Virus programs now have Removal Tools to use in addition.
    You might try power cycling the Router and see if that helps.
    Also check and make sure the Flash Player Shockwave Flash Object is Enabled in your IE manage addons. Also the Shockwave Flash plugin for FF plugins.
    eidnolb

  • I recently upgraded to Lion and my 2004 Microsoft Office no longer functions.  So all of my word docs are unreadable with the Lion system.  If I buy pages, will they be converted?  Also, I used Microsoft Word for editing docs, making comments and tracking

    I need help.  All of my word docs from Microsoft word 2004 cannot be read in Lion.  I can't believe I'll have to pay for a Word upgrade.  Is it worth it?  Is pages as good?  Will all of my docs be recognized once I upgrade to the current word or Pages?  I tried Open Office, but that doesn't synch all of the previous Word docs, it needs to be done one doc at a time.

    deeners wrote:
    It would have been nice to know this before buying a $29 upgrade to Lion. Which now will add a necessary $150 upgrade. Some people may have waited to upgrade to Lion had they known this.
    The fact that Lion is unable to run PowerPC only applications is publicized for months.
    I'm sure that it's well known in the heart of Amazonian forest
    Yvan KOENIG (VALLAURIS, France) mercredi 27 juillet 2011 22:24:14
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • Can I use the same TB profile on my laptop and PC via Onedrive or iCloud? If so, how?

    I know I can move the location of my TB profile and create new ones using Profile manager. I have done this using my Onedrive account and TB works fine. It would be very useful to be able to use the same Onedrive profile from two PCs but is this possible and how can I do it? Many thanks.

    It is possible, but prone to failure.
    You can not simultaneously share a profile
    Network speed is critical. Thunderbird portable and a thumb drive would be a better solution.

  • ITunes still doesn't recognize iPod Touch with Microsoft Security Essentials Installed

    Just updated iTunes to v. 10.3.1.55 and still have the same problem with iTunes freezing when connecting my iTouch.  It will eventually respond but never recognizes my ipod.  Un-install Microsoft Security Essentials and it works fine.  I have 2 other computers with the same setup (software wise) and neither of those have this issue.
    Here's a thread with more details I've posted trying to find an answer to this...
    http://www.sevenforums.com/system-security/161085-security-essentials-itunes.htm l#post1439068
    Any help would be appreciated...
    Thanks,
    Mike

    Thanks for the suggestions, however I have already tried that and it had no effect.  I've put in exclusions, and even went so far as to disable the MSE service and still have the issue.  The only thing that corrects it is uninstalling MSE completely.
    This USED to work fine until I updated to iTunes 10.2.2 a couple of months ago...that release seems to be when it broke.
    I've even went so far as to completely reload my PC and it will work perfectly until MSE is installed....then no luck.

  • Client Security solution not working with fingerprint, Fingerprint Tab is unavailable

    Just recieved my Thinkpad T430 today and have done all updates on the system. I am trying to use Client Security Solution with my fingerprint however it will not allow me to do so. Whenever I go into password manager I get the message, "The requested operation requires fingerprint authentication, but the device is not installed. Please make sure the device is connected and retry the option". Any idea as to how I can fix this? Currently the fingerprint only works to logon to windows (Note: I'm Running Windows 7 Pro x64).  

    Hi 
     Lastest CSs is not in system update, you could try the install the latest version in follow link:
    http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS014164

  • How do I launch and Reset Client Security Solution?

    W510, Windows 7 Professional, 64 bit, and I like using the Password Manager feature with fingerprint security.  During a recent printer installation I had to set-up a Windows Password (I never had one before). Now upon logging in, Client Security Solution continually provides error message ("Your windows password was changed recently. Please enter your Windows password to synchronize with Client Security Solution" - but it doesn't recognize anything I enter, including the current password. I can ignore the message but now I am locked out of some encrypted files.
    Lenovo Document ID#HT004617 correctly addresses this problem; but I'm stuck on their Solution Step #4 (Launch Client Security Solution) -  I'm supposed to launch the program, click advanced, and then select "Reset Security Settings."  Problem is there are over 4 dozen executable files in the (2) qty Client Security Solution sub-directories (c:/program Files (x86)/Lenovo/Client Security Solution and c:/Program Files/Lenovo/Client Security Solution) and I have yet to find one that properly launches the CSS program. (CSS is not available from the Lenovo ThinkVantage Tools menu). 
    How do I start CSS?  
    I keep machine up to date, ThinkVantage Fingerprint software #5.9.3, PW Manager version 3.20.0335.00. Machine is under warranty but Lenovo Support thus far unable to tell me what to do!
    I'm sure somebody here knows the right CSS file to run, and specific procedure to synchronize the Password, would sure appreciate some help on this, thank you!
    Solved!
    Go to Solution.

    Been away working, now back...
    It was an HP8500 Printer that started all of this.  I find it difficult to believe that a (simple?) printer install could do so much collateral damage...
    BACK TO MY ORIGINAL QUESTION - How do I reset CSS?  Per furnished Lenovo documentation, (found on the hard drive) CSS was never installed on Windows 7 machines (for some Lenovo reason).  I can export PWs to external drive but still have no idea how to launch the CSS files (of which several executable files came pre-loaded on my machine).
    As far as being locked out of files, Finale composition software now says (upon trying to open files) "You don't have permission to open this file. Contact the file owner or administrator to obtain permission.."
    Worst case, I can re-build my Finale composiitons, but I'm still annoyed with the Lenovo log-in screen constantly asking me to enter a password that I don't know!
    I am very dissapointed with purchased LENOVO WARRANTY SUPPORT - the people I've talked to have no idea about what I'm trying to explain to them.

  • Migrating from 6.1 to 8.1 using Compatibility Security

    We are trying to migrate a webogic 6.1 domain
    to weblogic 8.1 SP2. Followed all the steps
    to use compatibility security since wls 6.1
    domain had a RDBMS realm and we would like
    to initially maintain all the security users
    and permissions.
    The problem is weblogic 8.1 has a userid
    of "bea" when it was setup. The old weblogic
    6.1 had a userid of "system" and it somehow
    seems to remember that.
    When wls61 domain is migrated with all the
    config.xml changes, the security realm does
    not come up in wls81 because it says "bea"
    user is not authenticated for the security realm.
    Is there a way to bring the compatibility
    security realm with the new "bea" user ?
    The old wls61 bea domain did not have the
    boot.properties with encrypted userid and password.
    Say I do not know the old user's password, is there
    a way to bring up the security realm in compatibility
    security mode ??
    ####<Aug 9, 2004 5:27:31 PM CDT> <Notice> <Log Management> <alx-adcprapp-02.lsgsc.com> <admin> <main> <<WLS Kernel>> <> <BEA-170019> <The server log file /app/bea/domains/lsgsc/config/lsgsc/logs/weblogic.log is opened. All server side log events will be written to this file.>
    ####<Aug 9, 2004 5:27:31 PM CDT> <Info> <Security> <alx-adcprapp-02.lsgsc.com> <admin> <main> <<WLS Kernel>> <> <BEA-090149> <The server security configuration has been loaded from /app/bea/weblogic81/server/lib/SecurityCompatibilityConfig.xml>
    ####<Aug 9, 2004 5:27:31 PM CDT> <Info> <Security> <alx-adcprapp-02.lsgsc.com> <admin> <main> <<WLS Kernel>> <> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
    ####<Aug 9, 2004 5:27:32 PM CDT> <Info> <Security> <alx-adcprapp-02.lsgsc.com> <admin> <main> <<WLS Kernel>> <> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
    ####<Aug 9, 2004 5:27:32 PM CDT> <Info> <Security> <alx-adcprapp-02.lsgsc.com> <admin> <main> <<WLS Kernel>> <> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server admin for security realm CompatibilityRealm.>
    ####<Aug 9, 2004 5:27:32 PM CDT> <Notice> <Security> <alx-adcprapp-02.lsgsc.com> <admin> <main> <<WLS Kernel>> <> <BEA-090082> <Security initializing using security realm CompatibilityRealm.>
    ####<Aug 9, 2004 5:27:32 PM CDT> <Critical> <Security> <alx-adcprapp-02.lsgsc.com> <admin> <main> <<WLS Kernel>> <> <BEA-090403> <Authentication for user bea denied>
    Thanks
    Sam Khopkar

    I have exact same problem. any solution to this ... ???

Maybe you are looking for