Using Midi Reverb and chorus in the Mixer Window

When I have my 16 midi channels of my triton in open logic with midi data inside, and I turn the Reverb or Chorus button in the mixer window, there are no affects taking place. why?? Thanks

Hi,
Does your Triton have the General MIDI effects onboard? If not, then that is why it is not working.
Your MIDI device must have the effects onboard. So please consult your Triton manual.
Cheers

Similar Messages

  • HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

    I have Parallels installed with Windows 7.  Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

    You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

  • I am trying to use both DaqMx and DaqMxBase on the same (Windows) PC

    Context: I am seeking to build and test the EPICS driver for "National Instruments - Various DAQ cards" - see http://www.aps.anl.gov/epics/modules/manufacturer.php for Windows.
    This depends on NiDaqMxBase because it is built for Linux.
    Consequently, I have installed DaqMxBase 3.7 on my (Window 7 /x64) PC, which already held DaqMx 9.7.5.
    I cannot get DaqMxBase to recognise my pci-6601 counter/timer card.
    It it recognised by DaqMx.
    Should this card be recognised by DaqMxBase on Windows?
    Is it OK to have both driver versions installed on the same PC?

    Hey Peter,
    The USB-6008/9 has it's own article on this that I will link rather than typing it, it shows which operating systems support which drivers. Base and mx are both supported in some instances.
    http://digital.ni.com/public.nsf/allkb/2B1BB86D649297FB86256F96007AC55E
    Interestingly, in this case, Linux seems to only be supported by the Base driver.
    Thanks,
    Justin, Applications Engineer

  • X-Fi Midi Synth Reverb and Chorus Controller Is

    I bought an X-Fi a couple of weeks ago, and I soon realized that midi effects controllers cc9 and cc93 (reverb and chorus) didn't work with the X-Fi hardware synths. I called CL Technical support about this and this is the response I got:
    "I have spoken with our testers who say that the CC9-Reverb and CC93-Chorus amounts are set in theSF2 file. That value is typically set to hit 20% at maximum CC data entry (27). To work aroundthis, you will need to use NRPNs to set the amount to a greater level, or edit the SF2 contentitself. Please let me know if this information hel
    ps.
    No, it doesn't help, reverb and chorus effects in midi files are set with midi controllers #9 and #93, this is true of virtually every midi file available on the internet, including commercial midi files. CL's testers are wrong. SF2 files have embedded minimum amounts of reverb and chorus for certain patches, midi song files customize the amounts of reverb and chorus with controllers cc9 and cc93 to suit each particular song, and even change it during the song. Adding NRPN's involves editing the midi file by calculating the MSB and LSB for each desired value and adding four controllers for every channel of every song every time you want a change in the effects. Controller cc9 and cc93 have control sliders or knobs in every major audio/midi multitrack program and these require no editing. A midi synth that ignores this loses much of its realism, and this just isn't acceptable for those of us who make serious use of midi song files. I have several thousand midi files and it would take months or even years to edit them all. This is a bug that may only affect a small percentage of X-Fi users, but for those it affects, it's a major bug. From the response I received from tech support, it appears that they aren't planning to do anything about it, so I thought I would publicize the issue here and see if I can't change their minds. I drove a 20 mile round trip and paid $40 for my X-Fi and I've had to pull it out of my computer and put my Audigy back in. I'm not a happy camper at this point, but if CL is going to fix the issue, I'm willing to wait for a while because I think thye X-Fi is worth it.

    mriev wrote:
    Maxing everything was the first thing I tried, and no go. Still so little reverb it was hard to tell if it was working, and no detectable chorus. I even went back with Vienna 2.4 and checked my soundfont again, and all was as it should be.
    Putting together a brand new sound card is a major undertaking and it's understandable if something gets missed here and there, especially as most of the designers and testers probably aren't serious musicians. It's easy to see how this one could slip past, especially if they were using Soundfonts that have reverb and chorus programmed in to some of the instruments. Everything works fine until you start varying cc9 and cc92 and nothing happens. I haven't checked because I removed the X-Fi and put my Audigy back in, but it's a good bet that none of the midi effect controllers work properly. This is a relati'vely minor issue for most users, but for serious musicians who use midi, it's major. However, I'm sure CL will fix the problem as soon as possible. I just hope it doesn't take too long because the X-Fi is a really, really good sounding card, except for this one problem.
    Gi've the X-Fi another try. I had these same issues at first but now cc9 and cc92 work in Sonar4.
    These controls work, its just that the reverb is very low and the chorus has to be activated. In the effect editor choose the amphitheater preset as oppose to the default for reverb as it is the most audible.
    follow these steps:
    . choose creation mode
    2. enable EAX effects and set to max
    3. select amphitheater preset for reverb
    4. activate the 5 bus buttons for chorus in master aux effects box (Front L\R, ect)
    step 4 should work best for stereo setup
    This should do it.

  • I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from  mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB  appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

    I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from  mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB  appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

    Eric,
    Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
    The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
    I'm trying to record the sound from the DVD not rip the track.
    When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
    I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

  • How many effects can you put on each track? and best reverb and chorus fx??

    Hi,
    I was wondering how many effects you can truly put on each track.
    i tracked vocals last night and could only put two inserts in there. Is that all?
    so if i want to eq my voice and add verb or eq my voice and add chorus, i can't even think of adding anything else???
    also, what are the best reverbs and chorus effects to use that give your voice that professional sound that they have in R&B songs??

    i tracked vocals last night and could only put two inserts in there. Is that all?
    As you add a second plug-in, a third slot becomes available. Add a third plug-in, a fourth becomes available, etc...
    also, what are the best reverbs and chorus effects to use that give your voice that professional sound that they have in R&B songs??
    That "professional" sound (depending on what you're listening to) is the singer.
    Yes, there are FX that enhance it, but a plain, non-effected vocal will sound professional if the singer is good.
    If you're feeling like you have to add EQ, reverb, chorus, etc to sound "professional"... than the singing isn't good. Trust me on this one.
    Aside from a good singer, having a quality microphone and pre-amp is a good place to start, gear-wise. Follow that up with a good hardware compressor, maybe EQ, and THAT alone should sound like a million bucks if the singer is the real deal.
    Don't underestimate the importance of compression, when used correctly. This will even out the volume of the vocal, and bring it forward, making it seem more intimate.
    Chorus is rarely a flattering effect, unless it's used very subtly, or an obvious "effected" sound is desired.
    And a little bit of reverb can go a LONG way. A "smidge" of any of Logic's Space Designer vocal presets will do just fine.

  • Can we use both INSERT and UPDATE at the same time in JDBC Receiver

    Hi All,
    I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
    user send the file which contains both new and old record and I need to save those in MS SQL database.
    If the record exist then use UPDATE otherwise use INSERT.
    I looked on sdn but didn't find any blog which perform both the things at the same time.
    Interface Requirement
    FILE -
    > PI -
    > JDBC(INSERT & UPDATE)
    I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
    Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
    Thanks,

    Hi ,
              If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
    "If the record exist then use UPDATE otherwise use INSERT."
    Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ...  where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows  you proceed with "insert into tablename....." since there are no old records present in database.
      Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database.  A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
    http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
    http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
    [ This part you can ignore, Since its not sure that you will face this situation
        Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
    http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
    http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
    http://www.faqs.org/docs/ppbook/r27479.htm
    http://msdn.microsoft.com/en-US/library/ms187373.aspx
    http://msdn.microsoft.com/en-US/library/ms173763.aspx
    http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
    http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
    http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
        There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
    regards
    Anupam

  • I am trying to log onto a Mac Mini I haven't used in awhile and I forgot the password. I am trying to reset the password with my apple ID but the computer keeps saying the Apple ID and the password are incorrect whenever I know they are.

    I am trying to log onto a Mac Mini I haven't used in awhile and I forgot the password. I am trying to reset the password with my apple ID but the computer keeps saying the Apple ID and the password are incorrect whenever I know they are, as I am using the exact same ID right now.
    I have switched my password in the past, so my theory is my mac mini thinks that my password has not changed and it will not update because The Wi-Fi password has also changed so it cannot connect to any servers...Does that sound like I am on the right track?
    Is there a way to update my Wi-Fi password  (saved into the computer) without logging on?

    If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
    Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar.
    In the Terminal window, type this:
    resetpassword
    That's one word with no spaces. Then press return. A Reset Password window opens.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
     ▹ Restart
    from the menu bar.
    You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.

  • I'm new to Mac and the program/all called Numbers. I'm trying to use both Average and small in the same formula. What's I'm trying to do is take 20 cells, find the 10 lowest numbers, then get the average and after that multiply it by .96

    I'm new to Mac and the program/all called Numbers. I'm trying to use both Average and small in the same formula. What's I'm trying to do is take 20 cells in a column,  find the 10 lowest numbers, then get the average and after that multiply it by .96  I used to use Excel and the formula worked fine in that. Here is my Formula
    =(average(small(H201:H220,{1,2,3,4,5,6,7,8,9,10})))*.96
    This formula worked in Excel and when I converted my spreadsheet over to Numbers, this formula no longer works.
    The best that I have been able to do so far is use small in 10 different cells, then get the average of the 10 cells and finally multiply that average by .96  So instead of using 1 cell, I'm using 12 cells to get my answer.
    This is a formula that I will be using all the time. The next cell would be =(average(small(H202:H221,{1,2,3,4,5,6,7,8,9,10})))*.96
    Hoping I explain myself well enough and that someone can help me.
    Thanks

    You can still do it in one cell but it will be more unruly than the Excel array formula.
    =average(small(H201:H220,1),small(H201:H220,2),small(H201:H220,3),...,small(H201:H220,10))*0.96
    where you would, of course, replace the "..." with the remaining six SMALL functions.

  • Can I use Time Capsule and LaCie at the same time?

    Can I use Time Capsule and LaCie at the same time?

    stephaniefromarlington wrote:
    Before I answer your questions, let me first just say thank you so much for your amazing patience and helpfulness.  Whether or not we get to the bottom of this, I am very, very grateful to you. 
    We will get to the bottom of it, and you're quite welcome.  Don't feel you ought to know all this stuff -- none of us were born with it!
    By the way, in answer to your original question, yes, you can use the Time Capsule while backups are running. There's no conflict at all.
    1)  Estimated size of full backup:  205.94 GB
    2)  My LaCie has available:  11.04 GB of 359.95 GB
    That's part of the problem right there; 360 GB is a bit small to back up 206 GB.  Ordinarily, a Time Machine drive should be 2-3 times the size of the data it's backing-up, so Time Machine can keep a reasonable "depth" of old backups for you.
    It looks like Time Machine is trying to do a fairly large backup, and there just isn't enough room for it.
    But something doesn't quite add up.  Time Machine should have deleted all but your most recent backup, trying to make room for the new one.  But that would mean there should only be a bit less than 206 GB on the disk, not 360.
    A clue may be lurking in your logs.  Use the widget in #1 of Time Machine - Troubleshooting to display the backup messages from your logs.  Locate the backup in question, then copy and post all the messages here.

  • I have a Macbook pro mid 2011 and just bought the Apple TV. While watching program or movie from any of the apps such as Watch ABC, the program keeps stopping and starting constantly.

    I have a Macbook pro mid 2011 and just bought the Apple TV. While watching program or movie from any of the apps such as Watch ABC, the program keeps stopping and starting constantly.

    That would indicate a network issue.
    Reboot ATV and router
    Make sure DNS is set to auto
    Ensure router is up to date, if on wifi try ethernet
    Go to istumbler.net to get a report of the network, look for signal strength and noise

  • Can I use both iPhoto and Aperture on the same library?

    I like some of the features of iPhoto (like faces and places) but prefer to work in Aperture for its rich tool content. Is there any way I can use both iPhoto and Aperture on the same library? Or, import images from Aperture into iPhoto?
    Thanks much!
    John

    I think you may have answered a question I have with the above, but to be sure here is what I would like to do. I currently have iPhoto09 with about 50,000 pictures in it, which seems too much for it to manage. I would like to use Aperture, which I understand is better for managing a large number of photos, but still have iPhoto available to make slide shows, etc. for our AppleTV. Would the process you described above work for that?
    Thank you

  • Can we create graphic and text in the same window of smartform without using template?

    we create graphic and text in the same window of smartform without using template?

    Hi Kinjal,
    as far as i understand you are talking about a template which you can partitioned and in one part you wants to show your graphics and in other part you wants to print your text, the border of template shall remain invisible.
    If you wants to do it without using a template, you can do it as sujjested by Susmitha, but creating a template will provide you more flexibility that if you wants to change the attributes in future you can do it easily.

  • Can we use Badi BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time

    Hi everyone,
    We need you help. We are working in SRM 7 and ECC 6 EhP 4. We have a doubt. Can we use badis BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time in a classic scenario?
    We want to create the contract in ECC, and then we want to return the SC in SoCo in order to create the PO with the SC and the contract.
    We activate both, but the SC is not returned in SoCo.
    Thanks,
    Ivá

    Hi Ivan
    You can use both badi to change srm standard behavior.
    but one shopping cart item and it can have only one follow on document either Contract or Purchase order.
    i presumed that you want to use same sc for two purposes to create both SC and PO but it is not possible.
    for example
    shopping cart item has follow on document created  as a contract But you need to create a another shopping cart to create a Purchase order  w.r.t that contract .
    Once follow on documents are created sourcing flag will be removed .- rule
    BBP_SOURCING_BADI - you can write your custom logic and make way to cockpit .
    BBP_DETERMINE_LOGSYS - Determine your logical system.
    Muthuraman

  • HT3387 When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

    When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

    http://m10lmac.blogspot.com/2011/06/extra-spell-checking-dictionaries-for.html

Maybe you are looking for