Using migration assistant I transferred my complete MacBookPro to my nex iMac. Now I find out that all jampacks are missing in GarageBand. Can anyone advise? Thanks!
Using migration assistant I transferred my complete MacBookPro to my nex iMac. Now I find out that all jampacks are missing in GarageBand. Can anyone advise? Thanks!
I would think the migration assistant transfers 100% of all contents...
When you are setting up a new Mac you can use Setup assistant the moment you boot the mac the first time. Setup Assistant will usually transfer everything. If you miss tha t moment and later launch Migration Assistant some library files will not be transferred. Migration assistant will not transfer system files, only User Files and Application files. I think, that is why your files are missing.
so could you please tell how this copying is done?
Best take an external drive with plenty of free disk space and plug it into your MacBook Pro.
Open the System drive, your Macintosh HD in the Finder and open the folder "Library", then "Application Support", then "GarageBand". Copy the folder
/Library/Application Support/GarageBand/Instrument Library/ to your external drive by dragging it there.
Then open again the folder "Library" on your Macintosh HD, and this time open the folder "Audio" inside. Copy the folder
/Library/Audio/Apple Loops/
to your externall drive. Eject the drive and plug it into your iMac.
Now compare the AppleLoops folders and instrument library folders and copy all missing items over to the corresponding folders in the iMac's Library.
Afterwards you need to reindex the loops, by dragging any loop you newly installed onto the Loop Browser in garageband, see: Rebuilding the Loop Index in GarageBand
Similar Messages
-
I used Migration Assistant from my Time Machine for my iMac to my Macbook Pro (I'm pretty sure) when setting up my new laptop to transfer files I wanted from my desktop; now I have new files on my iMac that I'd like to transfer, and I'm wondering if Migration Assistant will send files that I already transferred to my Macbook again, thus creating doubles of files on my Macbook
Welcome to Apple Support Communities
Migration Assistant creates a new account to transfer files from another Mac, so you will end with doubles of files on the MacBook.
To avoid this, you can go with the easier way: get an external drive, copy all the files you have on your iMac to the external drive, connect it to the MacBook and copy the files on the external drive to the folder you want to.
Another way is to transfer them through your network. If you have OS X Lion or Mountain Lion on both Macs and they are connected to the same network, use AirDrop to transfer your files. Simply open a Finder window on the iMac and choose AirDrop in the sidebar. Then, drag the files you want to transfer to your MacBook Pro's icon.
Finally, if you have FireWire in both Macs, you can use Target Disk mode on your iMac (hold the T key while your iMac is starting), so your MacBook Pro will detect your iMac's hard drive as an external drive and you will be able to transfer whatever you need -
I used Migration Assistant to setup my new MacBook Pro (Retina) and to transfer my user account from my 1-year old MacBook Pro. Both computers have the same harddisk (500 GB SSD), but the new one now only has 85 GB of free HD space, whereas the old one still has 168 GB free space.
The space seems to be from files that show up as "Others" on the HD, but the large folders (music, movies, photos, documents, system, library etc.) are the same size on both computers.
Does anyone have any idea where the extra data could come from? I assume that languages would be stored in the System or Library folders, so even if I had deleted all unused languages from my old computer (which I may have done a year ago, I am not sure), this should not result in a more than 80 GB difference in free space, should it?
I would be glad if anyone had an idea where all the data may come from or how to get rid of it. Thanks a lot.baltwo wrote:
I'd get an external, bootable FireWire enclosure, put the new HD into it, ensure it runs the MBP, and then swap.
One thing to consider going forward: the new MacBooks (annoyingly!) do not have a Firewire port, so it might be a good idea to consider dual Firewire & USB 2 external drives/enclosures for future purchases. It won't matter for this swap but it will help avoid buying something that can't be used with any new Macs that don't have Firewire.
An low cost alternative for those that just need a temporary way to mount an external drive for uses involving only Intel Macs are the newish bare-bones USB drive adaptors, such as the NewerTech USB 2.0 Universal Drive Adapter. The advantage to these gizmos, besides low cost, is that they work with both ATA & SATA drives. Some, like the NewerTech model, also support other devices, like some optical drives. -
Just used Migration Assistant but spotlight won't index files on new iMac computer.
I just used Migration Assistant to move files from my old 2008 Mac Pro to a new 2013 iMac 27" both Intel based. Files and applications all moved over fine and I can access them in Finder but Spotlight won't index the files. Should I be reindexing something or do I need to do somethign for spotlight to recognize the new filez I migrated?
Thanks!You can force a Spotlight index, just let it run and your migration should be just fine. Instructions are in:
Spotlight: How to re-index folders or volumes located at: http://support.apple.com/kb/ht2409 -
I used Migration Assistant about 4 months ago to move everything across to my new iMac. Since then instead of being recognised as an iMac it's seen on the network and other places as my Mac Pro.
How do I change its name to iMac?
Cheers,
David
Mac OS X 10.6.8Hello David. Open System Preferences > Sharing. At the top you will see Computer Name and the old Mac Pro name. Highlight this and change to the preferred name.
Sometimes you also need to use the Edit button under the name. But if you change the name in the first view and then press the Edit button, it should show the new name you just set. -
Hi, I'm using a white iPhone 4s with 16gb memory and having some problems. Whenever I use earphones the sound will be heated when the volume is at the highest if I turn it down any lower all I hear is static. Can anyone help me with this problem as I would appreciate it much.
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset. -
How do I find out what all devices are using my Apple ID
I need to know how many devices are using my Apple ID. Where do I go to do that?
Rui C wrote:
You also can check your support profile.
https://supportprofile.apple.com/
Definitely a good place to start. However, in my case (probably through my own carelessness) it's not even remotely accurate. It has my previous iPhone (which was removed from iCloud in front of the person I sold it to) still listed by not my current phone. Also a couple of iPods that I know were no longer attached to my Apple ID when they were last working (a couple of them are not).
But, you've encouraged me to go in and do some house cleaning. I think I'll live my original iPod on there just for the nostalgia. -
Both are on the latest version of MacOS (made sure I had them completely up to date before starting).
Laptop and imac are connected via ethernet cable. Has been stuck for at least 2 hours showing "About 3 hours and 12 minutes remaining". Not sure what to do??Disconnect and connect your Ethernet cable. If the migration doesn't continue, restart both Macs and start the transfer again. Wi-Fi and Ethernet are slow so I don't recommend you to use it unless it's the only option you have
-
Using migration assistant I transferred the Adobe CS3 Premium to my new 2014 iMac. It is listed in applications but when I go to open it only Bridge opens, the others have a notice that cannot open and to contact administrator. I have the serial number - would that help? I don't see any place to enter it tho.
Thanksnever migrate adobe apps. properly install them:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Duplicate applications after using Migration Assistant
I'm posting this because I haven't seen this topic addressed yet regarding using Migration Assistant for transferring data from old G5 to new Mac Pro.
I used the Migration Assistant, which took hours to transfer data and stopped the first time due to a power backup overload. The second time I ran it, everything had transferred successfully, and I've been using my Mac Pro for almost two weeks now, with slight glitches that have been easily solved.
Here's my situation: In my Applications folder, there are a number of applications that have "(from old Mac)" as a suffix. Specifically, all of my Adobe Creative Suite applications have duplicates, as does Cocktail Extras, Corel Painter IX, DiskTracker (Mac OS X), Extensis Suitcase X1, Fetch 4.0.2, Finale 20045 and 2005b, and FontDoctor X for Macintosh.
Needless to say, I would like to recover the additional disk space that these duplicates are occupying, but is it okay to simply trash the ones that say "(from old Mac)", as I backed up my old G5 right before runnning the Migration Assistant, and I still have it sitting here, just in case something bad happens while I'm in the middle of a project? Or, should I trash the new ones? The Creative Suite apps have been activated on the Mac Pro, so I'm assuming that the "old Mac" ones could be deleted.
Anyone having any experience with this? I don't want to reinstall a lot of things unless I have to, as I will be upgrading a lot of the apps as soon as Intel-native versions are released, and things are working well so far.
Thanks for any advice you can give me.
2 x 3 GHz Dual-Core Intel Xeon Mac OS X (10.4.8) 8 GB RAM
1.8 Mhz G5 Mac OS X (10.4.2)Yes, it's OK to trash them. You have transferred items that are from a PPC Mac to an Intel Mac that apparently had Intel versions of the same software already installed. You definitely do not want PPC versions (this does not apply to most Adobe software which is PPC-only.)
Unfortunately, Migration Assistant doesn't always know when not to transfer PPC software to an Intel Mac. This is especially a problem for the /Home/Library/ and /Library/ folders because MA may overwrite Intel components with PPC components. This can cause the Intel Mac to run slowly or not at all.
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (does not work), TechTool Pro (pre-4.5.1 versions do not work), SuperDuper (newest release works), and Drive Genius (untested) may not work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
Basically the instructions you should follow are:
1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
2. Connect a Firewire cable between your old Mac and your new Intel Mac.
3. Startup your old Mac in Target Disk Mode.
4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
4. Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/com.apple.mail.plist (* This is a very important file which contains all email account settings and general mail preferences.)
/Home/Library/Preferences/ copy any preferences needed for third-party applications
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to another forum user for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Unfortunately, if you find problems with your new computer it may be due to problems that arise when migrating from a PPC Mac to an Intel Mac using Migration Assistant. If this be the case your only recourse is to reinstall OS X. You should also reinstall your third-party software (or update it) to be sure you are using universal binary versions (if available.)
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values. -
Permissions problem after using Migration Assistant - unable to copy files
I have a PowerBook G4 and 2 iMac G5 desktops - one iMac at home and one at work. I've had the iMac at home and the PowerBook for a while. The iMac at work is one I've just inherited from another user. Both are exactly the same model - 2Ghz iMac G5 (ambient light sensor). All 3 machines are running Mac OS X 10.4.6.
I decided to use Migration Assistant to transfer my Admin user account on the PowerBook to my work iMac G5, all of which worked great. So I now have an exact copy of the user folder from my PowerBook on my work iMac G5, and consequently the same combination of username/password.
When I mount the drive from my PowerBook on my work iMac via AFP I can copy files from the PowerBook to the iMac. But if I try to copy the file back to the PowerBook I receive the error "The operation cannot be completed because you do not have sufficient privileges for some of the items". The file does appear on the PowerBook, but it is 0K and therefore useless.
Worse, if I'm replacing a file on the PowerBook, I get the usual "An item named "blah" already exists in this location..." dialog. If I click Yes to replace the file it is wiped, but then the permission error pops up leaving me with a 0K file on the PowerBook and no original.
If I mount the work iMac drive on my PowerBook I see exactly the same issue - i.e. I can copy to the local machine from the mounted drive. But I cannot copy anything back without receiving the permissions error.
My home iMac G5 was not set up using migration assistant, but I do use exactly the same combination of username/password. It does not exhibit the same behaviour. I can mount the PowerBook drive on the home iMac and happily copy files back and forth with no permission errors at all. And the same if I mount the home iMac drive on the PowerBook - no problems.
So I'm guessing that this behaviour is a result of using Migration Assistant to create the user account on my work iMac. If I log into another account on my work iMac, mount the PowerBook drive and copy a file to the PowerBook it works fine. The problem only occurs in the account created by Migration Assistant.
Does anyone know how to resolve this, short of having to create a new user account on the work iMac and move all my files from one account to the other?
PowerBook 12" G4 867Mhz & 2 X iMac 20" G5 2Ghz Mac OS X (10.4.6)Hi,
you need to adjust the permissions for the files on your harddrive.
I think you have serveral users in different groups that may result a permission conflict.
- Put or copy your files you want to to a new folder.
- Use this tool, its easy to use for ppl that are not familiar with unix permission setup over the terminal: http://www.macupdate.com/info.php/id/6440
- give all files recursively all permissions (for testing) (777, owner, group, others)
- then test the copy procedure
this should help
Regards Thorsten -
Used migration assistant to move office 2008 and now i cannot open it
I had an old MacBook from 2008, and now have a new MacBook Air. Was told to use migration assistant to move my applications. I did this and now when I go to open any programme from Microsoft Office 2008, it takes me to Microsoft Office Setup Assistant, over and over and over... Its saying that I don't need to register...
Any advice or help?I migrated Office 2011 and other than forcing me to enter the license code again (all 2 million letters of it) everything went OK.
Note that when I tried to open Parallels desktop 6 it wouldn't open and said that it wasn't compatible with Mountain Lion and the icon had a sort of greyed out look. I upgraded to 8 and it started working. I wonder if there is any issue with Office 2008 and Mountain Lion? Probably not but it's a possibility.
You can buy an external superdrive too from Apple. I bought one for my 2010 Air. But CD sharing from another computer should work. I bring it with me when I travel to watch DVDs. -
Lost list of my wifi networks after using migration assistant / time machine
After using migration assistant / time machine to set up my new Mac I now miss the list of stored preferred Wlan/WiFi networks. So the passwords of wireless networks I. Used in the past are all gone.
Why is time machine not putting those on my new Mac as it does with many other settings?
How can I manually grab this list from my old Mac and out it on the new machine?
Will I find that time machine missed some other lists and settings as well?
Thanks for help.I've been working through this procedure this week. It's pretty good, and when it works it appears to work quite well, but there's still some bumps in the road:
(1) Once you've migrated, Time Machine itself seems to be a little confused and future backups may fail. You might have to start again by changing to a new Time Machine disk on your new laptop. You may lose your older backups, it's not yet clear to me.
(2) You can't restore from a previous backup during the migration, only the most recent one. (You can restore from an older backup using tools on the install CD if you need to.) I suspect this won't be an issue for you.
(3) Migration Assistant once you've logged in a Migration Assistant while you're starting up a new machine seem to work slightly differently. For example, sometimes the newest copy of the applications in your Applications folder (say, iMovie) is preserved, sometimes it makes an exact restore of the old Applications folder even if it's an older version of the application.
Overall it's been a pretty good experience, and what you want to do does work, but be prepared for the possibility of some issues. I tried this back in 10.5.0 a few months ago and had a lot of problems, things seem better now under 10.5.2.
- Ert -
Can you use migration assistant between 10.4 and 10.8
I'm trying to use migration assistant to transfer applications and files from a G5 imac running 10.4.11 to a brand new iMac i5 on 10.8.2. Have connected through ethernet cable but machines don't recognise each other!
Is this an OS problem or a PowerPC vs Intel issue?Be careful about trying to migrate applications from a G5 to an Intel mac running Mt. Lion (10.8.x). They may not work. Rosetta is no longer supported, so older applications that ran on your G5 may not run at all on your new iMac. And even some 'universal' apps that ran on 10.4 (Tiger) will not run well if at all on Mt. Lion.
It would be best if you install current versions of the applications you are interested in, from scrtach, instead of migrating what are now very old versions. -
Transferring iMac 27" to my Macbook Pro and not using Migration Assistant?
Hello,
I have my new iMac all set up and used Migration Assistant from my old iMac but created a new user account when I first set up my iMac and chose the do not migrate option. I didn't have the right Firewire cord so had to use Migration Assistant to transfer over after I was all set up with internet.
My new iMac is all up and running and I'd like to now migrate all my files to my Macbook Pro without doing it wirelessly (as it took over 24 hours to do last time). I'd like to transfer over files using my external hard drive.
elmac gave me some information in regards to another question which I edited here:
Hi, I use both TM & SuperDuper (2 different EHD's) I copy from SuperDuper (updated daily)(My Home Folder) iTunes you can enable sharing between computers and transfer that way..Photos from iPhoto Library..dragNdrop I use my Network, not as fast as FW..but easier on the mind. When I unpack my mac, I just set up with my email & Apple passwords..After that I repair Permissions then go about transferring.
Can I just transfer my home folder called Tuley from the main hard drive on my iMac to the user account section on my new Macbook Pro? Then I can transfer over the itunes folder etc.? I just want to make sure I'm doing this right.
Message was edited by: spiralgirlCan I just transfer my home folder called Tuley from the main hard drive on my iMac to the user account section on my new Macbook Pro?
Creating an account in System Preferences isn't the same as just putting a home folder into /Users/. The account needs to be created first.
Then I can transfer over the itunes folder etc.?
Yes.
(52008)
Maybe you are looking for
-
Business event (HR) -- follow up
Hi, how can I know the business event group and business event type of a business event? Thanks.
-
How can I talk with more then one person at a time?
How can I talk with more then one person at a time? With Faxe time? Is thier software needed to do this or can it be done with the basic package?
-
Syncing audio to clips after making the cuts -Adobe premiere pro cs 5.5
Hello Everyone, I am using adobe premeire pro cs 5.5. I have adobe prodution premium suite. I have completed my cuts with a bunch of clips in each sequence. None of them had audio, so I made all the cuts without the audio. Now I have got all the same
-
Can you uncrop a video on iphoto that was cropped and saved by accident?
Hello I just imported some photos to iphoto and accidentally cropped one of my videos and saved it. Is there any way to get the rest of the video back?
-
Hi All, I want to know the output type of SAPscript form F110_FR_CHEQUE. Could anyone help me in this regard?