Using MOPZ to upgrade SRM from 5.0 to 7.0

Hello to the group,
We are lookinig to upgrade SRM from 5.0 to 7.0 and were looking to MOPZ to calculate all the needed packages. However, when we run MOPZ for SRM we are not seeing the selection that allows us to select upgrades/enhancement packages (all we see is 'maintenance'). Is this normal? Has anyone been able to use MOPZ for this upgrade process?
Note that we have verified our settings in SMSY against SAP's recommendations for using the Maintenance Optimizer.
Thanks in advance for any help.
J. Haynes

Hello there,
Please check the Support Package level of the Solution Manager system. It should be at least on SP22.
In https://websmp107.sap-ag.de/solman-mopz it says that upgrade with an EHP install is supported for SRM, so it should offer the upgrade.
Please check the order of activation of these BC sets:
SOLMAN40_MOPZ_TTYP_SLMO_000
SOLMAN40_MOPZ_001
SOLMAN40_MOPZ_SP18
If they are activated in the above order, then it is OK. If not, or if any of them is not activated, them activate them in this order.
Best regards,
Miguel Ariñ

Similar Messages

  • Upgrade SRM from SRM 3.5 to SRM 5.0 - BW Influence

    Hello,
    We were working with BW above SRM 3.5 and built a lot of Business logic, DSO and Infocubes using the extractors: 0BBP_TD_PO_1, 0BBP_TD_CONF_1. We are now upgrade our SRM system to SRM 5.0 and found out that all the data sources had changed. Is there standard migration for the DSO 0bbp_po and 0bbp_con ? Do we need to build everything from the beginning? 
    Thanks,
    Amir

    EBP 3.5 to SRM 5.0 upgrade
    Go through the thread, i hope this would help you.

  • Error while upgrading SRM portal from 7.01 to 7.02

    Hi All,
    We are in process of upgrading SRM Java from 7.01 to 7.02. While JSPM was running 250GB of trace files (around 29317 files) have been written under D:\usr\sap\SJ7\JC01\j2ee\cluster\server0 and we are forced to stop JSPM and complete SAP instance.
    As soon as we start the instance with minutes 1GB trace files are written. All these files are dev_jrfc_xxxxx.trc.
    All these files have single error repeated continuously, kindly let us know how to resolve this issue.
    Error file opened at 20110706 102426 Eastern Daylight Time Rel 7.01.3 (2008-10-28) [710.234]
    Error thrown [Wed Jul 06
    10:26:12,128]:Error in RequestDispatcher.DispatcherWorker.run() java.lang.UnsatisfiedLinkError: nativeSAP_CMLISTEN
                at com.sap.mw.rfc.driver.CpicDriver.nativeSAP_CMLISTEN(Native Method)
                at com.sap.mw.rfc.driver.CpicDriver.SAP_CMLISTEN(CpicDriver.java:1137)
                at com.sap.mw.rfc.driver.RfcTypeRegisterCpic.waitForRequest(RfcTypeRegisterCpic.java:593)
                at com.sap.mw.rfc.api.RfcApi.RfcWaitForCpicRequest(RfcApi.java:1262)
                at com.sap.mw.jco.MiddlewareJRfc.waitForRequest(MiddlewareJRfc.java:641)
                at com.sap.mw.jco.RequestDispatcher$DispatcherWorker.run(RequestDispatcher.java:159)
                at java.lang.Thread.run(Thread.java:534)
    Regards,
    Siva.

    Hi Siva,
    it seems to me that you have heavy log archiving on the system. You can switch the log severity of all (or at least most) of the locations to the default. In addition, switch off the archiving of old log files:
    In the visual configtool navigate to Server -> Services -> Log Configurator -> Properties tab and set the value of the ArchiveOldLogFiles to "OFF".
    Also, using the Visual Administrator -> Services -> Log Configurator -> restore to default all the trace levels.
    Regards,
    Jonas Cella

  • Upgrade IDSM2 from 4.1(5)S225 to 5,1 using application partition

    can i upgrade an IDSM2 (WS-SVC-IDSM2-BUN)in a 6513 from 4.1(5)S225 to 5.1 by copying the 5.1 application partition to the sensor
    [from the cisco userguide]
    Chapter 10 Configuring the Sensor Using the CLI
    Reimaging Appliances and Modules
    Reimaging the IDSM-2
    This section contains the following topics:
    • Catalyst Software, page 10-124
    • Cisco IOS Software, page 10-126
    Catalyst Software
    To reimage the application partition, follow these steps:
    Step 1 Obtain the application partition file from Software Center on Cisco.com and copy
    it to an FTP server.
    Step 2 Log in to the switch CLI.
    Step 3 Boot the IDSM-2 to the maintenance partition:
    cat6k> (enable) reset module_number cf:1
    Step 4 Log in to the maintenance partition CLI:
    login: guest
    Password: cisco
    Step 5 Reimage the application partition:
    [email protected]# upgrade ftp://user@ftp server IP/directory
    path/image file
    Step 6 Specify the FTP server password.
    After the application partition file has been downloaded, you are asked if you
    want to proceed:
    Upgrading will wipe out the contents on the hard disk. Do you want to
    proceed installing it [y|n]:
    Step 7 Type y to continue.
    When the application partition file has been installed, you are returned to the
    maintenance partition CLI.
    Step 8 Exit the maintenance partition CLI and return to the switch CLI.
    Step 9 Reboot the IDSM-2 to the application partition:
    cat6k> (enable) reset module_number hdd:1
    Step 10 When the IDSM-2 has rebooted, check the software version.
    Step 11 Log in to the application partition CLI and initialize the IDSM-2.
    See Initializing the Sensor, page 10-2, for the procedure.
    IF NOT, THEN IS THERE A SHORT CUT FROM 4.1 to 5.1 ?

    Just wanted to clarify some things.
    As Scott has already confirmed you can re-image using the method described and following Scott's advice on what additional updates to install.
    BUT understand that any configuration you have your 4.1 sensor will be lost during that method of re-imaging to 5.1.
    Another alternative is to first upgrade from 4.1(5)S225 to 5.0(1), and then to upgrade to 5.1(1).
    The upgrade to 5.0(1) will convert the 4.1 configuration into a compatible 5.0 format.
    I saw another post you made implying that you had to downgrade back to 4.1(5)S189 to do the 5.0(1) upgrade. This is not the case. You can upgrade directly from your current 4.1(5)S225 to 5.0(1).
    You can install the IPS-K9-maj-5.0-1-S149.rpm.pkg file directly on your current 4.1(5)S225 sensor.
    When S225 was installed on your 4.1(5) sensor, it also placed in storage the corresponding S225 update for your 5.0 sensor.
    So when IPS-K9-maj-5.0-1-S149.rpm.pkg is installed on the sensor it will detect that stored off S225 for 5.0 and install it at the same time.
    So once installed you will be immediately at 5.0(1)S225.
    Once at 5.0(1)S225, then you can upgrade directly to 5.1(1) using the IPS-K9-min-5.1-1d.pkg upgrade.
    (NOTE: 5.1-1d file was created to fix some upgrade bugs, but still installs the same 5.1(1) files as the original 5.1(1) upgrade package).
    So you will wind up at 5.1(1)S225.
    Now at this point I would recommend installing at least one later signature update (S226 or higher in your case) BEFORE installing the 5.1(1p1) patch.
    And AFTER the signature update, then install the 5.1(1p1) Engineering Patch (contact the TAC for this patch).
    Because of this specific upgrade path, the best way to avoid some issues is to install at least one signature update before installing the 5.1(1p1) patch. The signature update helps to ensure the sensor is ready for the 5.1(1p1) upgrade. Some of the files needed for the 5.1(1p1) upgrade have been seen to not get carried forward properly in the upgrade from 5.0(1) to 5.1(1), but a signature update corrects those issues.
    NOTE: This precaution of installing the signature update BEFORE the 5.1(1p1) is only needed when upgrading from 5.0(1) to 5.1(1). If imaging directly to 5.1(1) using the maintenance partition, then the 5.1(1p1) can be installed before a signature update without an issue.
    Once 5.1(1p1) is up and running and monitoring packets and generating alarms, then additional signature updates can be installed afterwards.

  • Upgrade project : from SAP R/3 4.6C to ECC 6.0 by using SAP Data Services

    Hi All,
    My client is upgrading from SAP R/3 4.6C to ECC 6.0
    We are planning to use SAP Data Services(Data Integrator) in the upgrade plan from SAP R/3 4.6C to ECC 6.0 for Data Migration.
    we have no idea whether we can use this SAP Data Services(Data Integrator) in SAP upgrade data migration.
    The bottom line is we have to make use this Data Services (Data Integrator) product in our upgrade plan for Data Migration.
    Please tell us if anybody already used it such kind of scenario in a data migration project with Data Services(Data Integrator).
    If we can use Data Service(Data Integrator) what are the pros and cons in using this Data Services(Data Integrator).
    Thank You,
    Ashok

    My opinion is you would want to utilize SAP tools to port the data - our SAP BASIS administrator is out this week but we can provide exact tool names when he returns.  ELM (External List Management), IDOC are some of the tools.
    You could use DS/DI to export, cleanse, deduplicate the records prior to importing with SAP tools if that is your end goal.
    We also offer a data quality tool that extends DS/DI to cleanse/deduplicate name/address records as they are entered into the system.  It also comes with batch tools to cleanse/dedup the entire systems name/address information.  See Data Quality Management for SAP for further details.

  • Can't open iPhoto "To open your library with this version of iPhoto, it first needs to be prepared. To prepare the library, use the iPhoto Library Upgrader available from Apple." Doesn't work...

    I've tried to open my iPhoto and a message box opens up and reads "To open your library with this version of iPhoto, it first needs to be prepared. To prepare the library, use the iPhoto Library Upgrader available from Apple." I update this and this message continues to pop up. I've even tried to rebuild it, but no matter what I do the same message appears and iPhoto still wpn't open. Can somebody please help me?!

    i'm having the same problem with my iMac (Mac OS X 10.7.5) . i haven't really made any updates to it and yesterday when i tried to access the iPhoto library of my MBP (from my iMac) is when problems started. The iPhoto on the iMac initially said I need to install the recent version of the iPhoto. Since I can't find a 9.0 download, I went to buy the iPhoto on the App store.
    When I tried to install iPhoto (version 9.4.3) to the iMac, I got this message:
    The iPhoto Library Upgrader is a tool that prepares libraries from iPhoto 5 or earlier, so you can upgrade them with the current version of iPhoto. You can download the tool here.
    Note: If your library is from iPhoto 6 or later, this tool is not required."
    I then installed the iPhone Library Upgrader, but I got the same prompt:
    'You can't open your current photo library using this version of the iPhoto. You have made changes to your library using a newer version of iPhoto. Please quit and use the latest version of iPhoto."
    I guess this takes me back to square one? I am inclined to buy the iLife on eBay with the iPhoto 9.0 version, but needed to know if this is the case before I unfortunately bite the bullet.

  • Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it  started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with  +63 ..what will i do?

    Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it  started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with  +63 ..what will i do?
    I change everything into +63 and i thought everything is already fine,.. and then now , i dont know what happened why it doesnt recognize numbers with +63 anymore

    Hello hsielglad,
    Thank you for your question. iTunes 11.1 is required to update to and sync with iOS 7.  If you are still running iTunes 10.6.3, I recommend trying to obtain the update by going to the iTunes menu and selecting Check for Updates.
    iTunes: How to install the latest version
    http://support.apple.com/kb/HT5654
    If you continue to get the message that iTunes is up to date, you can download the latest version of iTunes here:
    Download iTunes
    http://www.apple.com/itunes/download/
    Once the file downloads, double click on the installation file that downloaded to initiate the installation.
    Best,
    Sheila M.

  • CC&B 2.1.0 upgrade of use of Microfucos visual cobol from net express

    Would there be any issue of upgrading the use of Microfocus Visual Cobol from Net Express?

    starfry wrote:I don't know if it's related to your problem but GPG2.1 doesn't allow pass phrases to be specified in a file or on the command-line. See the page on unattended operation, look at "%ask-passphrase" and "%no-protection" https://www.gnupg.org/documentation/man … ation.html
    Thanks for the link - that's only for gen-key, however. But I do confirm the "--passphrase-fd 0" is supposed to still be working as described in the current docs:
    https://www.gnupg.org/documentation/man … ic-Options
    --passphrase-fd n
        Read the passphrase from file descriptor n. Only the first line will be read from file descriptor n. If you use 0 for n, the passphrase will be read from STDIN. This can only be used if only one passphrase is supplied.
    So in theory the functionality hasn't changed. :-/

  • I just upgraded from IPhoto7 to 9.5. Now I can't open iPhoto without a downloaded tool to bridge the gap bewteen versions. I downloaded the tool and I still get the message "To prepare the library, use the iPhoto Library Upgrader available from Apple."

    I had to upgrade to Mavericks to send off the iCanendars I made in iPhoto. Then I had to upgrade my IPhoto from 7 to 9.5. Now when I go to open iPhoto I get the message "To prepare the library, use the iPhoto Library Upgrader available from Apple."  Well, I installed the Upgrader, but I still get the message and can't open iPhoto.  I have tried restarting the computer, but that didn't help.  How do I get the computer to recognize the Upgrader?

    You may get more replies in the iPhoto forum.
    https://discussions.apple.com/community/ilife/iphoto

  • Hello I'm upgrading my iPhone 4S tmw to a iPhone 5c , I also have a iPad which I've used iCloud to get pics from phone to iPad, obviously if I delete my phone pics there gonna go from iPad too. Any idea what I can do please?

    Hello I'm upgrading my iPhone 4S tmw to a iPhone 5c , I also have a iPad which I've used iCloud to get pics from phone to iPad, obviously if I delete my phone pics there gonna go from iPad too. Any idea what I can do please?

    In addition to the very sound and useful information posted by Lawrence Finch, there is also a way to save the photos from the photo stream to the camera roll on the iPad so that even if the photo stream is turned off, the photos will remain on the iPad.
    Launch the photos app and them open the Photo Stream album. Select every photo that you want to save by tapping on them, then tap in the action/sharing icon and select  - Save to Camera Roll.
    Having said that, the information that Lawrence shared with you is very important and the instructions in both articles are very useful. Make use of them.

  • How to upgrade eSourcing from version 5.1.8 Patch 3 to 5.1.8 Patch 4

    Please some one can guide me How to upgrade eSourcing from version 5.1.8 Patch 3 to 5.1.8 Patch 4 since i am new in CLM.

    Hello Gadewar,
    First of all make sure you read all the details given in the Upgrade Guide located at "Installation and Upgrade Guide"->SAP SRM->SAP E-Sourcing 5.1/SAP CLM 2.0->E-Sourcing 5.1/CLM 2.0 Component Upgrade Guide PDF at service.sap.com/support website.
    Note you need to have the support account to login to that website.
    How ever I am listing down basic steps required for upgrade below.
    1) Download the installables from the website I did mention above, have DB jar, have custom jar (optional).
    2) Take backup of the DB.
    3) Take backup of Config folder. Also take backup of the <home Dir>/Lib if you have some customizations in the form of JARS.
    3) Make sure the userid which is used for connection to DB have the required permission like CONNECT, RESOURCE, UNLIMITED TABLESPACE etc. It is given in the guide I mentioned above in section 4.1 Verify Privileges of Oracle Service Account.
    4) Stop ESO instance and run the setup and then upgrade scripts.
    5) Undeploy the old ESO application from App server and then deploy new .EAR from new <home dir>/fsapp on the app server.
    6) Start the app server and your ESO will be ready. You may need to use Workbooks to upload Localized Resources. This is the case if you have modified some OOTB localized resources in the past as a part of customization and have not used the overrides to give new resource values. If you have used overrides for localized resources in the past then you are good and need not to load the workbook.
    Again usage of Workbook depends on the requirement to requirement. You may need to use workbook based upon your business needs.
    Make sure you have not modified any OOTB query definitions as a part of customizations, if that is the case you will loose those query definitions as upgrade scripts overrides OOTB queries and then you should backup those as well before upgrade and then you may re-pull them after upgrade.
    Regards,
    Jagjeet Singh
    Edited by: ESO123 on Feb 2, 2011 8:54 PM

  • Can i use my husbands upgrade for the iphone 6 promotion

    My line is technically not eligible for upgrade, but my husbands line is (we are on a family plan with my mom). Last time I upgraded, they let me use my husbands upgrade since his was available. Can I do this for the iphone 6 promotion or will they not allow it?

    Can I transfer upgrade eligibility from one line to another?
    If you have multiple devices on your account and one is eligible for an upgrade, you can transfer upgrade eligibility to another line on your account whenupgrading your device in My Verizon. When you transfer eligibility from one line to another, the original line is no longer eligible for the upgrade discount.
    To transfer upgrade eligibility from one line to another line on your account:Go to the Upgrade Device page in My Verizon.
    Click Transfer Upgrade.
    Note: If the Transfer Upgrade link isn’t appearing, you may not be eligible to transfer an upgrade at this time
    Select the mobile number you want to upgrade. This will transfer upgrade eligibility to that line.
    Select the device you want to upgrade to and click Next.
    Follow the onscreen prompts to complete the remaining steps to upgrade your device.
    You’ve successfully transferred your upgrade eligibility to another line.

  • Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

    Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy.  It is a Macbook Pro  osx 10.6.8 (late 2010).

    Almost certainly none of the above!  Try each of the following in this order:
    Select 'Reset Safari' from the Safari menu.
    Close down Safari;  move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
    Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
    Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
              defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

  • Facing Parse Errors after upgrading database from 10g to 11g

    Hi,
    We are facing parse errors in the SQL's after upgrading database from 10g to 11g.
    Kindly look into below parse errors.
    ********************************** Parse Error *****************************************************
    Tue Aug 13 14:13:08 2013
    kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
    PARSE ERROR: ospid=15598, error=1446 for statement:
    SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
    Tue Aug 13 14:13:10 2013
    kksfbc 16173533: parse err=942 hd=3c387c4028 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
    PARSE ERROR: ospid=29813, error=942 for statement:
    Select feature from toad.toad_restrictions where user_name=USER or user_name in ( select ROLE from sys.session_roles)
    kksfbc 16173533: parse err=942 hd=3c97d83648 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
    PARSE ERROR: ospid=29813, error=942 for statement:
    SELECT password
    FROM SYS.USER$
    WHERE  0=1
    kksfbc 16173533: parse err=6550 hd=35185e4278 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
    ----- PL/SQL Stack -----
    ----- PL/SQL Call Stack -----
      object      line  object
      handle    number  name
    319e277050        30  anonymous block
    319e277050        57  anonymous block
    PARSE ERROR: ospid=29813, error=6550 for statement:
    BEGIN sys.dbms_profiler."146775420110782746251362632012"; END;
    kksfbc 16173533: parse err=942 hd=3c142d8600 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
    ----- PL/SQL Stack -----
    ----- PL/SQL Call Stack -----
      object      line  object
      handle    number  name
    319e277050        67  anonymous block
    PARSE ERROR: ospid=29813, error=942 for statement:
    SELECT 1 FROM plsql_profiler_data WHERE 0 = 1
    Please help.
    Regards
    Suresh

    Hi Suresh,
    Apologies for misunderstanding..
    Tue Aug 13 14:13:08 2013
    kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
    PARSE ERROR: ospid=15598, error=1446 for statement:
    SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
    Assuming you see the above error message in the alert log file, which was your original post, follow the below steps:
    1 Get the 'ospid' value from the error
    2. Issue the below command:
    SQL> select request_id,ORACLE_PROCESS_ID
      2 from fnd_concurrent_requests
      3 where request_id = 15598;
    3. After obtaining the request_id
    4, Query it from the front-end using SYSADMIN responsibility
    Hopefully this should get you the respective concurrent report/program.
    Thanks &
    Best Regards,

  • Unable to Sign in  analytics After Upgraded obiee from 10g to 11g

    Hi all,
    I have problem when upgrading catalog from 10g to 11g.
    The error is:" Unable to Sign In . An invalid User Name or Password was entered. "
    I upgraded following the steps like this:
    1.Login EM and check BI server is running successfully.
    2.Started the UA.bat.
    Select the operation:Upgrade Oracle BI RPD and Web Catalog.
    Step by Step,and the upgrade completed successfully.
    3.Open the RPD online using the Admintool succefully.
    4.But when I Login the BI and view the dashboard with the 10g's user (Administrator),the page appear the error "*Unable to Sign In . An invalid User Name or Password was entered.* "
    5.Then I Try to Regenerating User GUIDs
    1. Update the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI:
    a. Open NQSConfig.INI for editing at:
    b. ORACLE_INSTANCE/config/OracleBIServerComponent/coreapplication_obisn
    c. Locate the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter and set it to YES, as follows:
    d. FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = YES;
    e. Save and close the file.
    2. Update the Catalog element in instanceconfig.xml:
    a. Open instanceconfig.xml for editing at:
    b. ORACLE_INSTANCE/config/OracleBIPresentationServicesComponent/
    c. coreapplication_obipsn
    d. Locate the Catalog element and update it as follows:
    e. <Catalog>
    f. <UpgradeAndExit>false</UpgradeAndExit>
    g. <UpdateAccountGUIDs>UpdateAndExit</UpdateAccountGUIDs>
    h. </Catalog>
    i. Save and close the file.
    3. Restart the Oracle Business Intelligence system components using opmnctl:
    4. cd ORACLE_HOME/admin/instancen/bin
    5. ./opmnctl stopall
    6. ./opmnctl startall
    7. Set the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI back to NO.
    Important: You must perform this step to ensure that your system is secure.
    8. Update the Catalog element in instanceconfig.xml to remove the UpdateAccount GUIDs entry.
    9. Restart the Oracle Business Intelligence system components again using opmnctl:
    10. cd ORACLE_HOME/admin/instancen/bin
    11. ./opmnctl stopall
    12. ./opmnctl startall
    BUT THE ERROR ALSO EXISTING!
    So,waiting for the help,thanks!

    Hi,
    if your using oracle db please make sure your db settings and tnsnames.oRA settings
    also try you please try below troubleshooting steps:
    1) please check latest error message and find the root cause,
    presentation catalog log path:
    obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIPresentationServicesComponent\coreapplication_obips1\sawlog0.txt file
    also check it nqserver.log file
    oracle bi server log path ref:
    obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIServerComponent\coreapplication_obis1\nqserver.log
    2)can you try to login RPD,EM and console by using your weblogic a/c then try to login with some other user.
    if its not working then try to delete that users from catlog and check it Check OPMN services are running state.
    e.x:
    C:\Oracle\Middleware\instances\instance1\bin>opmnctl startall
    opmnctl startall: starting opmn and all managed processes...
    C:\Oracle\Middleware\instances\instance1\bin>opmnctl status
    Processes in Instance: instance1
    --------------------------------------------------------------+---------
    ias-component | process-type | pid | status
    --------------------------------------------------------------+---------
    coreapplication_obiccs1 | OracleBIClusterCo~ | 4992 | Alive
    coreapplication_obisch1 | OracleBIScheduler~ | 2420 | Alive
    coreapplication_obijh1 | OracleBIJavaHostC~ | 1856 | Alive
    coreapplication_obips1 | OracleBIPresentat~ | 5684 | Alive
    coreapplication_obis1 | OracleBIServerCom~ | 5232 | Alive
    3) Refresh GUIDs and Restart WebLogic and OPMN Services then try it again...still if your getting same issues then try to
    check DB(try to login and confirm) and check it RPD --> physical layer connection pool setting and try to
    view physical data.
    also paste it your latest error log message (nqserver.log and sawlog01.log message) here
    THanks
    Deva

Maybe you are looking for