Using Mountain Lion and getting "Error 102 (net::ERR_CONNECTION_REFUSED)" from some domain names that work on other computers on my network.
I can not load some websites/domain names through Firefox,Chrome & Safari. It seems like a DNS caching issue to me. I have tried flusing DNS cache and changing to to public nameservers with varying success. The domains will load on other versions of OSX on my network, so Iappears to be an OS version issue. Any help would be greatly appreciated.
Chrome Error
Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection.
Firefox Error
Firefox can't establish a connection to the server at domainname.com
Safari Error
Safari can't open the page "http://domainname.com" because Safari can't connect to server "domainname.com".
The following update also clears your "computer name" in Syst Prefs > Sharing, and entering a computer name solves network print issues for many. http://support.apple.com/kb/PH11143
From braden85:
About changing or updating printer software in Mountain Lion:
OS X Mountain Lion: Change or update printer software
http://support.apple.com/kb/PH10622
Similar Messages
-
Yesterday, I purchased Mountain Lion OSX and tried to download it but I don't think the download worked. How can I tell if I am using Mountain Lion and how do I get help if the download was unsuccessful?
Click your Apple menu icon top left corner of your screen.
From the drop down menu click About This Mac.
If Mountain Lion is installed, it will say: v10.8
If not, launch the App Store. From the App Store menu bar click Store > Check for Unfinished Downloads
FYI .. for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
If you need to reinstall OS X or repair the the startup disk Mountain Lion Recovery, that requires broadband access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation. -
Incorrect link to "OS X: How to migrate data from another Mac using Mountain Lion and earlier". Should be http://support.apple.com/kb/HT6025
I think the OP is saying OS X: How to migrate data from another Mac using Mountain Lion and earlier (which should be a link to HT4889) just links back to OS X: How to migrate data from another Mac using Mavericks (HT5872).
It does indeed do that, & HT4889 seems to be MIA. -
HT1338 recently purchased osx mountain lion $20 getting error on download
recently purchased osx mountain lion $20 getting error on download
http://www.apple.com/support/mac/app-store/contact.html?form=account
-
Hello, I'm using Mountain Lion and mail does not leave the mails on the server, either on iCloud nor on other suppliers (orange). They are both using iMap protocol... Any place where I could change this ? Thanks for any hall; Christian
Under what circumstances does mail "not leave the mails on the server"?
If you mean that you delete them (or move them out of the inbox) on one device and then find them not in the inbox on the server when you look from another device, that's how IMAP is supposed to work. (Note that the deletion or moving might be the result of rules you have set up in Mail.)
If you mean something else, please explain your issue in more detail. -
Tried to install update to Mountain Lion and get this message: OSXUpdCombo 10-1.8 image data corrupted.
Try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once. You can download from the Safe Mode.
Safe Mode
Safe Mode - About -
I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets on the network have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer. Yet Network control panel says I am connect to the modem, and Network Diagnosis says I am connected to the Internet. It's like the blind man who has eyes that cannot see. BTW, I am not some newbee. I have been a Machead since the early nineties and set up a half dozen networks, including the one I am using at home to which the iMac mysteriously is there but not. This has me stumped! I am considering going back to 10.7!
Select ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP. What values are shown for the following:
Configure IPv4
IPv4 Address
Subnet Mask
Router -
hi! I've just installed mountain lion and I find one of the programs I need for my work is crashing all the time. any ideas what i can do?
Ah!
Factuur Bright x
part of errors:
Process: Factuur Bright X [1476]
Path: /Applications/Factuur Bright X/Factuur Bright X.app/Contents/MacOS/Factuur Bright X
Identifier: ???
Version: ??? (2.0.0b20)
Code Type: X86 (Native)
Parent Process: launchd [184]
User ID: 501
Date/Time: 2013-07-10 22:35:39.180 +0200
OS Version: Mac OS X 10.8.4 (12E55)
Report Version: 10
Interval Since Last Report: 2118 sec
Crashes Since Last Report: 1
Per-App Interval Since Last Report: 24 sec
Per-App Crashes Since Last Report: 1
Anonymous UUID: 47D641A2-4625-7590-369C-8BAFE1439551
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000010 -
Can I text to an iphone using mountain lion and macbook pro?
Just wondering if I can text from my macbook pro using mountain lion with the new messages app? What i've read seems to say that you can text to any imessages user. Does this mean that a text can go from my messages app in mountain lion on my computer to an iphone using imessage? Thanks!
Hi,
You have to have an Apple ID on Messages on the Mac to get it to start.
Once that is done it will also tend to find all the iChat Accounts you may have had.
Uploaded with Skitch!
I have several names that have "me" in the name that Messages thinks are iMessages accounts (see icons).
I also have AIM (AOL) accounts.
My Google ID is a Jabber account.
The iPhone has to be set up in Settings > Messages > Received At > Caller ID
As has been mentioned in this thread the Messages option has to be on.
A New Message icon starts things and then you chose a Contact for iMessages
Uploaded with Skitch!
It indicates if you are using iMessage or AIM or Jabber to Contact people.
The "To" spot becomes a drop down when a name is there (you can then change to an Apple ID or Phone number or Switch to an AIM Screen Name or Jabber ID if the Contact (Address Book) Card has the details
Uploaded with Skitch!
As you can see I have an @mac.com and an @me.com name logged in and could switch to AIM logins to contact "myself" as a Buddy (rather than an iMessage Contact)
10:34 PM Sunday; August 5, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I think I finished installing Mountain Lion, and am at the "log in" page with the Mountain Lion icon, but I cannot do any of the functions on screen. That is, I cannot log in, sleep, restart, or shut down. I am running it on an Early 2009 Macbook Pro, which is said to have the capabilities of running Mountain Lion.
BrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP. -
I keep getting an error message "The application could not be downloaded" when I am downloading OS X Mountain Lioin. Need help.
You're certrain your Mac qualifies for Mountain Lion? > Apple - Upgrade your Mac to OS X Mountain Lion.
Make sure there's enough available space on the install disk to install Mountain Lion (4.35GB file).
Click the Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info then click Storage from the menu.
Make sure there's never less than 15% available spacce. -
OS Mountain Lion and Finder Error -600
In the past week my system seems to have become slow. I get many "beach balls" especially when using MS Outlook 2011 and I have not installed any new software in over 90 days, except Software Updates via the App Store.
This new issue I believe is Finder related. If I try to open my "Documents" folder from the Dock, I get the error "The application "Finder" can't be opened. -600". This also prevents me from opening DropBox from my toolbar. However, if I click on the actual folders in my Home folder, they open just fine.
I have tried the usual: fixed permissions, restarted, used Onyx without help. Next I downloaded the 10.8.2 Combo Updater and ran it. This seemed to fix everything. However, 2 days later, the same issues are back.
I see from old forum posts that this is a "process issue" usually related to expired software, but this error is for the Finder.
Thoughts? Ideas?
Thank you in advance.Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
Developing an iOS app on Windows and get error 90161 on upload from Mac
Hello,
I have developed an AIR for iOS app in Flash CC 2014 on Windows. I use MacinCloud managed server for uploading .ipa to store for testing. It is virtual server service with Mac OS. They have Application Loader pre-installed.
I made certificates [cer converted to p12] on Windows and installed provisional profile. I made another certificate on Mac and added it to provisional profile too.
I get error when trying to upload from Application Loader:
ERROR ITMS-90161: "Invalid Provisioning Profile. The provisioning profile included in the bundle com.xxx.yyy [Payload/yyy.app] is invalid. [Missing code-signing certificate.] For more information, visit the iOS Developer Portal."
Stuck here. Tried to add cert made on Mac. Flash doesn't like it and stops compilation.
Any help will be highly appreciated.Unfortunately I have no experience with Apple Testflight, but I can show you how to host on your own server.
Create a .plist file on your server with the following data in it:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>items</key>
<array>
<dict>
<key>assets</key>
<array>
<dict>
<key>kind</key>
<string>software-package</string>
<key>url</key>
<string>http://yourserver.com/path/to/ipa</string>
</dict>
</array>
<key>metadata</key>
<dict>
<key>bundle-identifier</key>
<string>com.yourcompany.yourgame</string>
<key>bundle-version</key>
<string>current version of your app</string>
<key>kind</key>
<string>software</string>
<key>title</key>
<string>name of your app</string>
</dict>
</dict>
</array>
</dict>
</plist>
Then, on your server, make an HTML page with the following code in it:
<a href="itms-services://?action=download-manifest&url=http://yourserver.com/path/to/plist">click here to install<a>
Navigate to that page on your device, click the link, and it should work! (assuming the adhoc provisioning profile you built your app with contains permissions for your device) -
I am able to talk to the device using the MAX tool and also using Plug & Play VIs. The device is at address 7, so I'm using the string GPIB[0]::7::INSTR. I have downloaded the latest hp345xx dll (version 3.13)and have iviscope version 3.0.2.0 installed.
Thank you for the help.Hello,
What version of the IVI Compliance package do you have? You can check this under the software tab in MAX. Also, see the attached screenshots for a sample assignment/configuration of a logical name and a driver session. Once you have gone through the analagous steps it should work, where your resource name control in LabVIEW should be populated with the logical name created in MAX.
Repost if this isn't successful!
JLS
Best,
JLS
Sixclear
Attachments:
IVI_Screenshots.zip 625 KB -
The website is www.Jardencs.com/careers. When I click on "Career Opportunities" I get the following error message:
Request Error
Forbidden directory
Listing denied
Close the browser and try to log on again.
Error Code: 403.14.
The link has worked on my computer up 'til now and works now on my cell phone. I recently installed Torch, but uninstalled it today when I started having this problem.Did you try to log in to that website?
If it worked before then try to clear the cache and the cookies from this website.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Maybe you are looking for
-
How to create a Group in iPhone 5
How can I create a Group on iPhone5 to send a text?
-
The audio on my hp pavilion dv6-6b27nr no longer works
The troubleshooter did not find a problem. I re-installed the driver. Suggestions?
-
My iPod came with a cable that allows me to hook up to the tv to do photo slide shows on the tv from the photos stored on the iPod. Does anyone know if the iPhone will be able to do this? Thanks.
-
How to update business partner in SRM through FM or using ABAP
Hi expert, My requirement is to update the requester field in the Shopping Cart with another requester as well as some other CUF field. Through BBP_PD_SC_UPDATE i am able to update the CUF item fields but i am unable to update the business partner. p
-
Korean text in photo book print (Aperture)
Hi, I want to know if Korean language text will be printed on my photobook created by Aperture. To make this post helpful for others, is there any language not supported by Aperture/iPhoto? FYI, I'm ordering from the United States. Thank you.