Using MPEG Streamclip to convert files for EX-1 sequence

I am trying to use MPEG Streamclip to convert mp4 and mpeg files in order to edit them in the same sequence as my EX-1 footage. What settings should I use on MPEG Streamclip that would be most appropriate for seamlessly editing the former MPEG and mp4 files with the EX-1 footage? Any thoughts on what sequence settings I should use? Right now I have it set as "XDCam Ex 1080p24 VBR" but every time I bring in files I have tried to convert using MPEG Streamclip, they need to render and I'm trying to avoid that. Thanks!

Thanks for the help

Similar Messages

Using MPEG streamclip to convert VIDEO_TS files (DVDs) with chapters

I am using MPEG Steamclip to convert DVDs (ie VIDEO_TS files).
Where the DVD has no chapters then it converts in one go into a new file.
However where the DVD has some chapters, it gives me an option to convert each chapter individually. I actually just want to convert the whole DVD in one go, with all the chapters merged together - is there any way to do this?
Thank you

Thanks for the help

MPEG Streamclip Altered Original files.

I recently did a video shoot with a Canon 7D. I loaded 2 16gb cards onto a Lacie Rugged drive into seperate folders. After the shoot all the original files worked fine for playback with Quicktime and editing.
I then used MPEG Streamclip to convert the first cards footage to Apple ProRes. The harddrive ran out of memory halfway through the conversion and MPEG Streamclip canceled the batch conversion.
I went back to the original files and only about 5 random few out of 90 shots would still work with quicktime and editing while the rest no longer open. I read somewhere that if you don't rename the newly converted files then something happens so I deleted the new ProRes files. Nothing changed. I'm guessing that MPEG Streamclip altered the original files somehow?
When trying to open in Quicktime Player 7 I get "The movie could not be opened. The end of the file was reached."
I then tried to open the now working files in VLC and they work fine.
All the footage from the second card all works fine still.
I used VideoSpec to look at what was going on and compare between a working clip and a not working one. There were no difference in format or anything other than duration.
Container: MOV - Quicktime
Format: H.264/MPEG-4 AVC
Encoding Profile: [email protected]
Please help me get these files working again! I can not recreate this footage!!!! I know the information is still all there because the files can be played with VLC, I just can't edit with them anymore...

LeoAhrens wrote:
I'm guessing that MPEG Streamclip altered the original files somehow?
Not likely, more probable that the drive directory or file structure was damaged while trying to write to a full disk.
Do you have the original camera cards, or back up copies?
If you do, return to them and start the process over again with more disk space.
If not, you should backup what QT files you have now on the corrupted disk in case something else occurs.
After that:
If it were me, I would run Disk Warrior to repair the disk directory -
http://www.alsoft.com/diskwarrior/
QuickTime movies are very, very hard to recover if corrupted, but you can try QuickTime Repair from Digital Rebellion, part of the Pro Maintenance Tool Package -
http://www.digitalrebellion.com/promaintenance/
I believe they have a free trial offer.
MtD

Error converting .mov to .avi using MPEG Streamclip

Hi folks,
I'm trying to convert an .mov to an .avi for a client using MPEG Streamclip. I have exported a high res master copy of the video from Final Cut (it's a .mov format is Pro Res 422 1920x1080 50i).
So when I bring this file into MPEG Streamclip, I select File > Export to Avi.... and then the following settings:
DivX Codec
Quality 75%
The compression starts and I instantly get the error "Compression Error"
When this started I installed the lastest version of DivX however since I am new to exporting as .avi I am completely lost. I was able to get MPEG Streamclip to export using Apple Cinepak however the quality is awful so I am looking for another solution. I have also tried converting from my highest resolution MPEG-4 export, however I get the same result.
I am thinking that maybe my DivX codec isn't installed, or there is some problem with it? However I thought a new installation of DivX would fix this.
Any help is greatly appreciated! Thanks.

I would suggest exporting three small test files using H264 codec at three different rezolutions.
Play them back and if satisfied send them to your client to evaluate so they can decide what will work for them.
1280x720 H264 files are what we give to our clients these days as "high quality' video.
Smaller files might be recommended for faster download and smoother playback on their system.

Rendering while converting from DVD using MPEG Streamclip or Cinematize

Is there anyway to make rendered .mov file, while converting from DVD to .mov, using MPEG Streamclip or Cinematize for final cut pro?
Thanks.

Are you asking if there's a way to export from mpegstreamclip so you don't need to render when you edit with the file in fcp? If so, yes... (sorry couldn't resist).
What format is your sequence in fcp (make the timeline active and hit command(apple)-zero? Note the pixel dimensions, frame rate and compressor settings and set the quicktime options in mpegstreamclip export dialog to match them. You should be good to go.
Also, you might do some searching here. Pretty sure someone posted a link to a tutorial on how to do this,

How do i use proper settings in mpeg streamclip with m2t files?

hello,
i have seen this discussion before but not sure what codec i need to transfer to for my type of files...
i shot a video on the **sony hvr z7u** using compact flash cards and the video was shot on 1080i 24 frames per second...all the files are currently in m2t...
i used mpeg streamclip and used the follow settings:
-apple motion jpeg a
-100 percent quality
-uncompressed sound
-frame size: 1920 x 1080 (unscaled)
-interlaced scaling was checked
although the files are workable in FCP the files themselves are gigantic...did i use the correct settings?
thanks very much,
steven

Steve
Download and install Sony's Compact Flash and Portable Recording Unit Log and Transfer plugin (BPE-SS-038D): http://support.sonybiz.net/software/detail.aspx?id=BPE-SS-038D&model=HVR-DR60
Andy

Process for exporting in FCPX and then using MPEG Streamclip to downgrade?

I have footage shot with a 5Diii, and it is set at 1920x1080, 23.98p.
When I export through FCPX at H.264, it gives me a beautiful master file, but is larger than the 4GB that I need.
What is the process for using MPEG Streamclip to get a smaller file?
Do I export a master file in FCPX first using a different codec, and then use MPEG Streamclip to compress it? If so, what would be the best setting to export from FCPX, and then what would be the best setting to compress at in MPEG streamclip?
My goal is to be as close to 1080HD as possible.

Here is the background story....... I provide movie files on a DVD delivery (files in SD quality) and then also give a copy of the same films on a flash drive so clients can have it in HD quality, and plug the flash drive directly into the TV.
This always worked fine in the past until I ran into a movie file that is 4.7GB, and would not copy onto the flash drive, since flash drives only accept files up to 4GB.
So I tried reformating the flashdrive to exFAT. It allowed me to copy the 4.7GB on the flashdrive, but when I tried plugging it in directly to the TV, the TV did not recognize the drive. (I learned that exFAT is not always compatable with all TVs.)
My other option would be to download an app to let me reformat the drive into NTFS which accepts files bigger than 4GB, and supposedly works better with TVs. I haven't tried this yet because I am worried that downloading that app might mess up my computer. ???????
So....I have come to the conclusion that the only other thing I can do is compress the 4.7GB file to be 4GB (or less) so it will fit on the flash drive which I believe had an original format was MS-DOS FAT.
Are you suggesting instead of exporting the file from FCPX in H264, I should do it in ProRes? The file will be much larger than 4GB, but, then I can compress it, without losing as much of the quality as I would if I compressed an H264 file? Either way it needs to be 4GB or less, so I don't know if that defeats the purpose of using a ProRes file to begin with.
Thank you so much for helping with this!

Mpeg Streamclip not converting whole file!

i have recently been using Mpeg Streamclip - but it is failing to convert the whole VOB file on my dvd, the clip is 5mins - and its only doing the first 50 secs.
anyone have any ideas???
really appreciate any help

In addition to mpegStreamclip you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20.

Hi there. I shot with a nikon d7000. The clips look great on the viewer but quite bad on canvas (also after its been exported) I converted my clips to apple pro res 422 using mpeg streamclip. The size I used was 1920 x 1080. How can I fix these?

Hi there. I shot with a nikon d7000. The clips look great on the viewer but quite bad on canvas (also after its been exported) I converted my clips to apple pro res 422 using mpeg streamclip. The size I used was 1920 x 1080. How can I fix this?

This is the clip:
This is the sequence:
I know they both should match. Question is, should I re convert the clips in mpeg using different size settings? Or should I change the sequence settings? how?
Thanks A LOT.

Mpeg Streamclip opening DVD files help

I'm using Mpeg Streamclip 1.9.3b7 on a MacBookPro 15" and trying to rip a 50min episode off of a bought DVD in order to use in FCE to make a showreel for an actor friend. The file is a 1.07Gb .VOB of an MPEG Program Stream kind. When I open it in Streamclip I can only get the last 22 mins of the episode. I've tried with the other episodes on the disk and alternative episodes from a different series of the same programme and getting the same result. I'm brand new to Streamclip, so could very well be making a large schoolboy error, but after scouring forums I haven't found a solution. I've fixed timecode breaks and seem to be able to convert the twenty minutes that I have, but just can't locate the first half of the episode. Could it be copyright protection?
Any help would be hugely appreciated.
Thank you.
SJ

Streamclip does not work on encrypted, protected DVD's. It is against the terms of use on the forum to discuss ways of breaking encryption. Best bet: contact the producer and get a clean file.

Compressor Or MPEG Streamclip To Make Files Smaller?

I currently use MPEG streamclip to make my mov files smaller and mp4 as it doesnt allow good quality MP4 exports from FCP and I was wondering what most use as Ive had trouble making the mp4 with XCam footage for a mov file from Streamclip as the quality is pixelated.

Time to read the docs for Compressor. You can use the inspector to see just what size of file to expect. Make sure you click on the compression setting of your clip...
Patrick

Using my software to convert videos for another user - how do I sync it ?

I have been using a software to convert dvd for ITouch with great effect. now I want do do same for a friend - but am worried that when I syn i will loose all that's currently on her iTouch. How can I do this?

Before someone points out that we cannot discuss of even act like converting a DVD is possible because it is allegedly illegal, you are not asking that. You, by magic we assume, can do this. You are asking whether you will lose what is on her iPod.
I am not sure you can sync her iPod from your system but if you did you'd want to set it to only sync what you checked and then only check that one movie.
I wonder... is there a reason yo cannot just move the converted file from your computer to hers and let her import it?
-fred

Why can't i use trial version to convert files to word?

Why can't i use trial version to convert files to word?

Symptom: I downloaded the trial of Acrobat Pro. But when I try to create a PDF or export a PDF, by using the Convert or Export button, I am asked to subscribe.
Cause: You are mixing up two different products. Adobe Reader is the free PDF reader you had before and still have. Acrobat Pro is a DIFFERENT product and doesn't even have the Convert or Export buttons you are using (so, we can tell for sure you aren't actually using the demo you downloaded).
Solution: quit Adobe Reader. Start Acrobat Pro (from START in Windows, or from Applications on Mac OS). You will see a product similar to Adobe Reader but able to do much more. Open PDF files with File > Open, NOT a double click. To export to other formats, use File > Save as... various options.

ERROR OGG-00446 No valid log files for current redo sequence 142

2011-02-03 14:26:41 ERROR OGG-00446 No valid log files for current redo sequence 142,
thread 1, error retrieving redo file name for sequence 142, archived =0,
use_alternate = 0Not able to establish initial position for begin time 2011-02-03 14:25:17.
Is this an error finding the redo logs or is this an error finding the archive redo logs.

Yes. It depends - is that sequence number in the current log group, or is it in an archived redo log?

Using MPEG Streamclip for Mac. Help me if you can

Hi, I've found out about MPEG Streamclip in Apple Discussions.
I opened Streamclip for the first time and converted an .mpg file to .mov file by clicking File>Export to Quicktime. It successfully converted quickly and I opened it w/ Quicktime and was satisfied to open its properties and see two individual tracks for visual and audio. This should convert to iPod video format w/ sound, correct? What bugs me is the fact that the file size multiplied by 4, or went from 256MB to 1GB.
I would like to know the perfect exporting settings for good iPod quality (sound and visual) and reasonable size. What scares me is that if and when this newly 1GB file is converted to iPod, it'll be even larger, since a previously successfully converted movie went from 3.5MB to 5.1MB.
I'd like to know your experiences of using Streamclip. Should I experiment? What setting did you use to get the mpeg files to .mov files with smallest size and equivalent quality? Any reply is appreciated, and ones that answer my questions shall be favoured.
thnx for your time

In a nutshell, YES you should experiment. You should also try iSquint incidentally.
However, MPEG Streamclip 1.5.1 has an iPod button if you do File -> Export to MPEG4. Clicking that button sets the parameters to equal what the iPod would need to display without having to convert to a QuickTime movie first. Do one both ways to see if QuickTime and MPEG Streamclip's output looks identical (I've found QuickTime does a better job on animation).

Using MPEG Streamclip to convert files for EX-1 sequence

Similar Messages

Maybe you are looking for