Using MS Outlook settings to set up Evolution with an Exchange server

I am currently using Outlook with an Exchange server, and I would like to use Evolution instead. I installed evolution and evolution-ews, and in going through the initial account setup, I am asked for a host URL and an OAB URL. I'm not sure what these are and can't find them in Outlook. Surely these paths are stored somewhere in Outlook, right?

When I used outlook before, I was able to log in through a web browser as another way to browse my mails when away from the office. The example in the link was
https://server-ip.com/exchange
which is the same as I was able to use. Of course, I am almost sure the address can be different. With my limited knowledge, I would recommend just entering your credentials in Evolution and click "Authenticate". If all goes well, you should then be prompted for your password. If you don't have that option, try to login to that address from your web browser. If not, maybe you can get in touch with IT or the server admin to see if the outlook server is setup to allow webdav and if in fact that is the correct address.
Last edited by BluMongoose (2014-09-03 19:49:57)

Similar Messages

How can I set Office Communicator to use my Outlook settings

dears
i use the business exchange mail from vodafone egypt
in work i can use outlook to see my mails and also office communicator
but here in home i can only use OWA and outlook and i cannot set the Communicator to use my Outlook settings
i also tried to use the same settings that already set on the work but i cannot login to it
so please help me to open it
sorry about my English not good :)

Looking to do voice overs? See iMovie '11: Record a voiceover

How do I sync My Treo 700p with my exchange server in Outlook 2007

I am having trouble syncing my phone to Outlook ever since we installed an exchange server at the office. It appears to be syncing, but the calendar and contact items do not come over. It is as if it were still syncing to my old profile. Any help would be appreciated.
Post relates to: Treo 700p (Sprint)

VersaMail
Which type of VersaMail user are you?
I'm new to VersaMail and ...
My company uses Microsoft Outlook and supports Exchange ActiveSync
My company uses Lotus Notes
My company or personal email provider uses POP3 or IMAP
I already use VersaMail on another device and ...I want to transfer my settings to my Treo 700p smartphone
Setting up a Microsoft Exchange ActiveSync account in VersaMail
If your corporate email system uses Microsoft Exchange Server 2003, you may be able to use Microsoft Exchange ActiveSync on your device. Microsoft Exchange ActiveSync works with the Calendar, Contacts, and VersaMail applications on your device to directly download calendar events, contact information, and email messages from the server - without going through your desktop PC.
First, get this information from your IT department:
Microsoft Exchange 2003 mail server If your corporate mail system does not use this type of server, you cannot use Microsoft Exchange ActiveSync. Mail server name The name of the mail server that provides wireless access to your mail system. Some companies do not give out this information because they do not want wireless access to the system. If you cannot obtain the server name, you cannot use Microsoft Exchange ActiveSync. Proxy server Your IT department can tell you whether a proxy server is used and, if so, the name of the server. VPN requirement Some companies require a virtual private network (VPN) for accessing the server. Note: If you can't use Exchange ActiveSync because your email system doesn't meet all the requirements above, you may be able to use Good Mobile Messaging (formerly GoodLink) or Sprint PCS Business Connection instead.
If you set up VersaMail to work with Microsoft Exchange ActiveSync, Calendar and Contacts information automatically synchronizes directly with the Exchange server, along with email messages. You cannot choose to synchronize Calendar and Contacts info with Palm Desktop software or Outlook once you set up VersaMail to work with a Microsoft Exchange ActiveSync account. If you do not want to synchronize Calendar and Contacts info with the server, do not set up VersaMail to work with a Microsoft Exchange ActiveSync account.
Now you're ready to set up Exchange ActiveSync in VersaMail
On your device, press Power/End to wake up the screen, and then press Center to turn off Keyguard.
Press Applications and then select Email.
If you see the "Initial Setup" screen, select Continue to begin the setup.
Enter the basic account information:
In the Account Name field, enter a descriptive name. This can be anything you wish, such as "Work Email."
Select the Mail Service pick list, and then select Exchange ActiveSync.
Select Next.
Enter the account username and password:
Enter the username you use to access your email. In some systems, this is your Windows username (such as "John Doe"); in others, it's something else. Get this information from your IT department.,
Select the Password box, enter your email account password, and then select OK. Again, in some cases, this is your Windows password. Talk to IT about this password.
Select Next.
Enter your email address and Exchange mail server name. Select Next.
Select one of the following:
Done: Finish and go to the Inbox of the account you set up, where you can begin getting and sending email.
Advanced: Set more mail options.
Test Settings: Ping the Exchange Server and find out if your settings are correct, without downloading email yet. You'll see a message that states whether the test was successful.
Optional: If you selected Advanced ...
Select any of the following:
Port Number: By default, the port number setting is 443. You may need to change the port number if you choose not to retrieve incoming mail over a secure connection.
Use Secure Connection (SSL): By default, this box is checked, meaning you can retrieve incoming mail over a secure (Secure Sockets Layer, or SSL) connection. Uncheck the box if you do not want to receive email over an SSL connection.
Select Next.
Optional: If you selected Advanced ...
If you use a proxy server, enter the proxy server name and port number, and check the box if your server requires authentication. Check with your system administrator for this information. When you have finished, select Done.
Optional: If your system requires a VPN connection for email ...
A VPN connection enables you to log in to your corporate mail server through the company’s firewall (security layer). You need a VPN if your device and your company’s server are located on opposite sides of the firewall.
Check with your company’s server administrator to see if a VPN is required for accessing the corporate network. Your device software installation CD may contain a link to download VPN software for the device. If it does not, you need to purchase third-party VPN software. Learn more and install VPN.
Once you download or install the software, you set up a VPN connection in Preferences on your device.
After you set up a VPN, you need to connect to it in order to retrieve email messages from your corporate mail server. You must do this each time you open VersaMail to retrieve messages from the server.
Go to Applications and select Email.
Open the menus .
Select Options, and then select Connect VPN.
Enter the username and password you use to log in to the VPN.
Select OK.
Post relates to: None
Post relates to: None

Outlook 2013: There is a problem with the proxy server's certificate

Hello!
One more question regarding Outlook 2013/Exchange2013SP1:
There are three lab PCs: DC, Exch1, Exchange2. There's a wildcard certificate installed on Exch1 (https://social.technet.microsoft.com/Forums/en-US/6a440c99-47bd-4f48-8cc5-9f92e6b06496/wildcard-certificate-for-exchange-2013?forum=exchangesvrgeneral).
OWA works perfect with this wildcard certificate.
I install Outlook2013 on Exch1 and get the error:
DC.Entreprise.Local is a computer certificate issued for the computer DC.Enterprise.Local.
DC.Enterprise.Local IS NOT (and never was) the proxy for Exch1 or Exchange2:
How Outlook could request DC's certificate if the proxy server = Exch1.Enterprise.Local???
Thank you in advance,
Michael

Hello all,
Thank you for your replies!
Since I'm using a wildcard certificate I changed Outlook providers according to this:
http://blogs.technet.com/b/exchange/archive/2013/08/02/part-2-reverse-proxy-for-exchange-server-2013-using-iis-arr.aspx
If you do choose to use a wildcard certificate, you should also make sure that you
change the EXPR Outlook Provider, so that Outlook Anywhere clients can successfully connect to the Exchange Server (this behavior can be a particular issue
if you have Windows XP clients). If you do not make this change then end users may continue to receive a prompt for a certificate mismatch."
...and EXCH and EXPR are both set to *.Enterprise.Local.
"I install Outlook2013 on Exch1" you mean you install Outlook on top of Exchange?" - on the same server as Exchange, and in this case Outlook must use SCP, not DNS (the server and the client are in the same AD domain).
"Without SCP, Exchange try DNS autodiscover lookup, first site it will try is
https://emaldomain/autodiscover/autodiscover.xml, which happen to be resolve to your domain controller." - I think that's the case... I just don't understand why
an internal client can't find the SCP that does exist and point to exch1.enterprise.local:
Regards,
Michael

I just got my dads old iPhone 4. I restored it to factory settings and set it up with my apple id. The albums in my music are fine in iTunes but on my phone the albums are split and each song is its own album. Does anybody know how to fix this?

My dad has recently gotten a new phone and I got his old one. With his permission I restored it to factory settings and set up the iPhone 4 as a new phone with my apple id. Everything has downloaded fine but I have had many problems with my music. First it was where my phone didnt recognise my apple id, but I figured that out. Then it was where iTunes took one of my albums and split it so all the songs where their own albums. I fixed the album split on iTunes but its still like that on my iPhone. I have looked online everywhere and I still haven't found a solution! I'm getting super frustrated! Does anybody know how to fix this?

No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

Setting up your iPhone to sync with 1and1 Exchange Server.

_+*You *must have* iPhone firmware version 2.0 and higher to sync to Exchange Services+.*
iPhone and 1and1 exchange work amazingly well. Most folks out there are still using the IMAP side of the 1and1 Exchange service. *"THIS IS NOT FULLY FUNCTIONING EXCHAHGE"*! Here is how to really set up your phone to sync Mail, Calendars, and Contacts with 1and1 Exchange accounts.
From your home screen:
1: Go to the settings control panel on your iphone.
2: Touch the "*Mail, Contacts, Calendars*" tab.
3: Touch the "*Add Account...*" tab.
4: Touch the "*Microsoft Exchange*" tab.
A screen asking you to "*Enter your Exchange account information*" will appear.
5: type your email address attached to your 1and1.com exchange account.
ex. "[email protected]"
6: type your domainusername. Your 1and1 username is one that is assigned to you by 1and1.
the username must be typed out in this manner: exchangee123456789
*If you already know your 1and1 Exchange Username then skip to step 7.*
Your 1and1 username starts with an "e" and its followed by nine numbers (ex.: e123456789). If you do not know this username you have to go to your Administrator panel at the 1and1 site,(Here is the URL to the admin page. *http://admin.1and1.com*).At the prompt enter your customer number *which is located on your monthly 1and1 invoice* followed by your password. if you have never seen this control panel you will have to sign in and get a password to access this area. Once in the Admin area under the packages tab click the url labled "*1&1 Microsoft Exchange*". You will now be in the *Administration Tab*. Now under the *communications tool* section click the URL labeled *"Microsoft® Exchange Account Overview"*. You will now see a list of the exchange usernames in that exchange package. Find your username and either print out the page or write the number down.
7: type your 1and1 exchange account password.
8: type a description that best corresponds with your 1and1 exchange account. As a suggestion you should type a description that makes your account stand out. "*ex. 1and1 exchange account*" (this will be helpful later in distinguishing what calendars come from which account if you are syncing multiple calendars.)
9: touch the "Next" button at the top right of the screen.
iPhone will connect with the 1and1 exchange server and authenticate your account. If the authentication fails check one of your entries then try again.
10: once iPhone authenticates your account a field called "Server" will appear between the "Email" and "Username" fields. Enter "exchange.1and1.com" into this field.
11: touch the "Next" button at the top right of the screen.
12: Select which part of the Exchange Services you would like sync with your iPhone.
ie. *Mail, Contacts, or Calendars*. (Simply slide the on or off switch next to the service you either wish to sync or exclude.)
13: once you have chosen your services touch the "Save" button at the top right of the screen.
iPhone will once again contact the 1and1 Exchange server. You will be returned to the mail settings screen.
You are now done
If you don't have any contacts on your iPhone just go look at your address book now. If you chose to sync your address book all of your contacts have populated themselves into your iPhone contacts tab.
AWESOME
Welcome to Exchange on the iPhone!
Some thing to try to verify your Exchange account.
1: Create a Calendar or Address book entree in your iPhone. Now watch it appear on your Outlook account.
2: Tell a friend with Outlook to invite you to a calendar event. You will receive an invitation right there on your iPhone screen.
Have fun and enjoy your new iPhone.
+*I would like to thank all of the folks at Apple Computer for their time and efforts in making the iPhone the coolest phone/PDA/game console/business tool in the planet!*+
Message was edited by: Angel Banchs
Message was edited by: Angel Banchs

Unless Apple decides to license ActiveSync from MS, this will not happen.
Apple hasn't done so since OS X was first released for whatever the reason or reasons and although always/never should not be used, I'm not sure how likely this is.
I venture to say that Apple is well aware that the iPhone is limited to business use as is - at least for those with an Exchange account - with a company or IT department not willing to enable IMAP account access for email accounts. Initially, the iPhone was not designed nor intended for the enterprise/business market as is a Blackberry, Palm or Windows Mobile device. It is obvious from the commercials that the focus - at the present time anyway, is as a consumer device. The iPhone/iPod Touch SDK scheduled to be released on March 6 may change this but what will come out of the SDK and when is unknown at this point.
If you need to access your Exchange account with the iPhone and your company and IT department refuses to enable IMAP account access, there are no workarounds for this. There are ways to make accessing an IMAP account secure by requiring SSL for the incoming and outgoing mail servers and the iPhone also supports VPN - virtual private network access which is secure.
Other than that and you don't want to keep the iPhone for personal use, it is probably best to return it and wait until after the SDK is released to see what may turn up.

How to set Iphone 4s to sync with Microsoft Exchange server 2003?

I am unable to set up my Microsoft Exchange Server with my Iphone 4s. The exchange server is 2003 with Service Pack 2 installed.
I have gone through the steps, but I get a box entitled “Exchange Account”saying “Unable to verify account information”.

Hello,
Seems you are not using an Exchange server account, please refer to the following link and try to set the out of Office notices with POP3, IMAP, and Outlook.com accounts:
http://office.microsoft.com/en-us/outlook-help/send-out-of-office-notices-with-pop3-imap-and-outlook-com-accounts-HA010248748.aspx
Best Regards,
Steve Fan
TechNet Community Support

How do I set up e-mail with an exchange server?

My father works as the IT Manager of a small, privately owned company that uses an Exchange Server for e-mail and the like. A co-worker of his recently bought an iPhone 4 and desperately needs him to set up her e-mail to be used on the new phone. Luckily I have an iPhone 4 myself so he's practicing on my phone before going to her. But, unfortunately, the phone will not accept the Exchanger Server he's trying to use. IMAP is already open on their server so we can't figure out why it won't allow him to connect via my phone.
Does anyone have any tips or suggestions? This needs to be resolved by 9PM EST!!
Thanks in advance!

This link will give you all the info you need http://images.apple.com/iphone/business/docs/iPhone_EAS.pdf

Outlook Calendar invite - Not able to send from exchange server.

Hi,
I am not able to send outlook calendar invite from exchange server. But if i installed outlook on my local machine/server it works fine. Below code the i used to build calendar invite for your reference.
public static void sendOutlookInvitationViaICSFile1(EAppointmentMail objApptEmail)
try
log.Info("Invite Started");
Microsoft.Office.Interop.Outlook.Application apptApp = new Microsoft.Office.Interop.Outlook.Application();
Microsoft.Office.Interop.Outlook.AppointmentItem agendaMeeting = apptApp.CreateItem(Microsoft.Office.Interop.Outlook.OlItemType.olAppointmentItem);
DateTime venueDate = Convert.ToDateTime(objApptEmail.VenueDate);
string formatedVenueDate = venueDate.Year.ToString() + "/" + venueDate.Month.ToString() + "/" + venueDate.Day.ToString();
DateTime from = Convert.ToDateTime(formatedVenueDate + " " + objApptEmail.FromTime);
DateTime to = Convert.ToDateTime(formatedVenueDate + " " + objApptEmail.ToTime);
System.Net.Mime.ContentType typeHTML = new System.Net.Mime.ContentType("text/html");
//Create the Body in HTML format
string strBodyText = "Type:Single Meeting\r\nOrganizer: {0}\r\nStart Time:{1}\r\nEnd Time:{2}\r\nTime Zone:{3}\r\nLocation: {4}\r\n\r\n\r\n\r\n{5}";
strBodyText = string.Format(strBodyText, objApptEmail.Email, from.ToLongDateString() + " " + from.ToLongTimeString(),
to + " " + to, System.TimeZone.CurrentTimeZone.StandardName,
objApptEmail.Location, objApptEmail.Body);
if (agendaMeeting != null)
Console.WriteLine("started");
agendaMeeting.MeetingStatus =
Microsoft.Office.Interop.Outlook.OlMeetingStatus.olMeeting;
agendaMeeting.Location = objApptEmail.Location;
agendaMeeting.Subject = objApptEmail.Subject;
agendaMeeting.Body = strBodyText;
agendaMeeting.Start = from;
agendaMeeting.End = to;
Microsoft.Office.Interop.Outlook.Recipient recipient = agendaMeeting.Recipients.Add(objApptEmail.Email);
recipient.Type = (int)Microsoft.Office.Interop.Outlook.OlMeetingRecipientType.olRequired;
((Microsoft.Office.Interop.Outlook._AppointmentItem)agendaMeeting).Send();
log.Info("Invite Successfully End");
Console.WriteLine("End");
catch (Exception ex)
log.Info("Error: " + ex.Message.ToString());
Console.WriteLine("Error: " + ex.Message.ToString());
In exchange server/ not outlook installed server, i am getting below error.
"Retrieving the COM class factory for component with CLSID {0006F03A-0000-0000-C000-000000000046} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG))"
Help me to send calendar invite without installing outlook on the specified server. Please do the needful.

Hi
It is probably that the stuff you doing is for outlook and because outlook is not installed it cannot find the classes.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Setting up Email to Microsoft exchange server

I need help setting up my email to my server. I can access my mail though the web by using mail.exchange.com, but when I try to set it up for my BB it will not recognize it. What do I need to tell my IT person to do to make it work?
Message Edited by juan1158 on 06-02-2008 03:22 PM

Your company will need to have the BES (Blackberry Enterprise Service) software installed on their servers. Point your IT person to the following link:
http://na.blackberry.com/eng/services/server/exchange
If your company doesn't have the budget for it, you can set up a forwarding rule to a blackberry email that you create using BIS and then modify that entry to have a reply-to setting that points to your work email address.

Outlook 2010 doesn't automatically re-connect after Exchange Server reboot - help

We have recently upgraded from Exch 2003 to Exch 2010. We also upgraded our users Outlook client from 2003 to 2010. Now when an Exch 2010 server is rebooted Outlook does not re-connect automatically. You have to close Outlook and re-open
it and it starts working again. Others have reported the same issue. Outlooks shows the status in the status bar area as password is required. I have read an article in the forums about it being an authentication problem. What
changes can I make in Outlook or to Exchange 2010 to make Outlook automatically reconnect after an Exchange server reboot. thanks

They connect internally in the LAN with their domain credentials.
I haven't noticed any errors in the Exchange server related to this issue but I have not really looked in the logs right after this happens.
I guess I just don't understand how when we were running Exch2003 with Outlook2003 we did not have this problem. Now that we have spent all this money and upgraded to bigger, better, smarter software we are having a problem like this. It seems like
if Outlook senses the lost connection and transfers to Offline that it would keep periodically to see if the email server is back up and reconnect.
Sorry for the delay response.
I would suggestyou create a new Windows profile and test it again. Some times the windows profile curropted and woithout being able to provide credentials.
Hope it is helpful.
Fiona Liao
TechNet Community Support

Using report parameter in data set filter expression with an SSAS data source

I have an SSRS report with an SSAS data source.
Report parameters:
Param1 - text, single select
Param2 - text, multi-select
Dataset:
In Query Designer, I want to include Param1 as a filter expression so I can have "Dimension1 Begins with @Param2". I'm not sure the exact syntax to make param2 work in this.
The point is to filter my data set on param1. If A is selected for param1, I want the data set to have the filter saying "Dimension1 begins with A"
Anyone know how to use a report parameter in the dataset filter expression for an ssas data source?

hi,
try this maybe the dates you are comparing are not in the same format.
I test data template in EBS but not with dates.
to_date(date,'dd/mm/YY') between to_date(:p_from_date ,'dd/mm/YY') and to_date(:p_to_date ,'dd/mm/YY')
if dont works try to put values insted of your parameter like :
to_date(date,'dd/mm/YY') between to_date(:p_from_date ,'10/01/07') and to_date(:p_to_date ,'01/12/07') ... put dates where u can have some values in report...
if dont work then try to print the values of the 2 parameters and the date of the select somwhere in ur report to see what you have in it..
hope it helps..
Regards Joe.

How to use HTTPS to retrieve a set of files from a distant server?

Hi !
i am interested in some samples or links showing how is it possible to use HTTPS in a java code in a standalone application ( could be swing based or whatever) that allows an HTTPS connection to a distant server ( specefic file repository) so that downloading some data files could be possible.i am also interested to know what conditions should be available to make such connection possible ( specefic port number? specefic authentication? login? password? and does the Operating system on the distant server interfere with that ? etc...)
thanks!

in fact i tried to test a sample code by i got this exception :
Exception in thread "main" javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
     at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:174)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1591)
     at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:187)
     at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Handshaker.java:181)
     at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:975)
     at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(ClientHandshaker.java:123)
     at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Handshaker.java:516)
     at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Handshaker.java:454)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:884)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1096)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1123)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1107)
     at sun.net.www.protocol.https.HttpsClient.afterConnect(HttpsClient.java:405)
     at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(AbstractDelegateHttpsURLConnection.java:166)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:977)
     at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(HttpsURLConnectionImpl.java:234)
     at HTTPSConnector.main(HTTPSConnector.java:30)
Caused by: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
     at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:285)
     at sun.security.validator.PKIXValidator.engineValidate(PKIXValidator.java:191)
     at sun.security.validator.Validator.validate(Validator.java:218)
     at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.validate(X509TrustManagerImpl.java:126)
     at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:209)
     at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:249)
     at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:954)
     ... 12 more
Caused by: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
     at sun.security.provider.certpath.SunCertPathBuilder.engineBuild(SunCertPathBuilder.java:174)
     at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:238)
     at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:280)
     ... 18 moreand here si the sample code:
package foo;
import java.net.URL;
import java.io.*;
import javax.net.ssl.HttpsURLConnection;
public class Test
public static void main(String[] args)
throws Exception
String httpsURL = "https://your.https.url.here/";
URL myurl = new URL(httpsURL);
HttpsURLConnection con = (HttpsURLConnection)myurl.openConnection();
InputStream ins = con.getInputStream();
InputStreamReader isr=new InputStreamReader(ins);
BufferedReader in =new BufferedReader(isr);
String inputLine;
while ((inputLine = in.readLine()) != null)
System.out.println(inputLine);
in.close();
}so what this error is due to? and how to fix it ?.
thanks!

Need help setting up VPN with OS X Server 2.2

I just bought OS X Server in the hopes that it would be a simpler way to set up VPN for use with my iPhone. I've tried a couple third party VPN configuration tools before with older versions of OSX but was never able to get it working. Now I'm running 10.8.2 and Server 2.2. I've made some progress, but I'm not quite there yet.
Here's what I have set up in the VPN window:
And the user I created:
The User services show that VPN is selected:
I let the Server app configure my Airport Extreme, and it looks like it set up the port mapping:
Here are my iPhone settings
-Server is set to my iMac's public IP address assigned by my ISP
-Password is the password I gave the user account
When I turn the VPN on in the iPhone I get:
"Connecting..."
"Starting..."
"Authenticating..."
then an error:
"VPN Connection
Authentification failed."
What am I missing?
Thanks,
Sean

Hi,
1701
UDP
L2TP
l2f
Mac OS X Server VPN service
1723
TCP
PPTP
pptp
Mac OS X Server VPN service
Try L2TP

How do I change the password that connects my Outlook for iPhone app with my Exchange server?

I changed my domain password so I needed to change it on my iPhone Outlook app. I have looked everywhere I can think of, in the settings and everywhere else, and cannot find anything that will allow me to change the password. I had to uninstall and re-install.
This seems ridiculous to me.
Corey Carmickle

Hi,
Since this forum is for general questions and feedback related to Outlook for Windows, I'd recommend you post your question to the Office for iPhone forum:
http://answers.microsoft.com/en-us/office/forum/office_mobile-outlook-os_device_iphone?tab=Threads
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
I would very much like to get "the most qualified pool of respondents". However, in the link you supplied there is NO place to ask a question. There was someone who asked a similar question and the response was from a Microsoft Support Engineer pointing
him to yet another place "for better suggestions". This site is setup like some gigantic maze where when you can't answer a simple question like; Where can I change my domain password in the new Outlook App for iPhones? You pass us around until you
figure it out, or we give up, delete the app and start feeling like not everyone over at Microsoft has a brain. I apologize for the frustration level, but when I do this kind of thing for a living and it becomes this difficult, I can't imagine what most of
Microsoft's endusers feel. 'Thank you for your understanding.'
Corey Carmickle

Using MS Outlook settings to set up Evolution with an Exchange server

Similar Messages

Maybe you are looking for