Using multi-displays in Mavericks, when I switch workspace on one screen the others also switch
I am a programmer and I use a lot of different workspaces and 1-2 extra displays. When I switch workspaces on one display the other also move, and if I put a program to fullscreen the other displays become blank and unuseable. It messes up my workflow and is extremely annoying.
When Mavericks first came out it wasn't like this but after last update it changed again.
Any suggestion is appreciated.
Thanks a lot! The settings just reset after update, I feel really stupid right now but also relieved
Similar Messages
-
When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.
I would think you would drop down the audio level lines in the "Stereo" tab (FCP 6.0.6 view to me) in the clip's video window.
But then again, in my old version, I can't play two clips at once. But I figure if the newer FCP allow you to do that, then that's what I would do. -
My iphone and Macbook do not sync automatically when I update contacts on one or the other
When I enter new info or add a new contact on my Macbook or on my iphone, it doesn't always show up on the other device. It use to do this.
This should work automatically. Try turning iMessage off and back on again on both devices
Good luck! -
I have my text messages synced between my iPad and iPhone. When I read them on one device and delete them they do not delete on the other. Is there a setting I can check to make the 'delete' action sync as well?
This should work automatically. Try turning iMessage off and back on again on both devices
Good luck! -
I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?
More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed
-
I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?
Hi...
Mac OS X keyboard shortcuts
Control-F4
Move focus to the active (or next) window
Shift-Control-F4
Move focus to the previously active window
By the way... since you are new to Mac, click a clear space on your Desktop. You should see "Finder" top left corner of the screen in the menu bar.
Click Help then click Help Center
As an example type in keyboard shortcuts
You can use the Help menu for almost any application on your Mac.
Apple - Find Out How - Mac Basics
For held switching from PC to Mac > Apple - Support - Switch 101 -
Firefox is displaying unreadable characters when visiting some websites like digg. The sites work fine in all other browsers. I've tried all encoding options in firefox.
This issue can be caused by an old bitmap version of the Helvetica or Geneva font or (bitmap) fonts that Firefox can't display in that size.
Firefox can't display some old bitmap fonts in a larger size and displays gibberish instead.
You can test that by zooming out (View > Zoom > Zoom Out, Ctrl -) to make the text smaller.
Uninstall (remove) all variants of that not working font to make Firefox use another font or see if you can find a True type version that doesn't show the problem.
See also [/tiki-view_forum_thread.php?forumId=1&comments_parentId=566006] -
Does iPhone record when sound is manually turned off via the external side switch?
Does iPhone record when sound is manually turned off via the external side switch? Enquiring minds want to know.
Are you asking if the phone logs when someone mutes it? No, I don't believe so. Or, are you asking if audio recording apps still record when the phone is muted? Why don't you use the included VoiceMemo app and test it?
Best of luck. -
Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?
You really have to mess with the resoluton, espescially the refresh rate, as it varies from projector to projector, monitor to monitor. Even within the same brand! Because so many manufacturers are trying so many different things to become the next cool kid on the block, and the way the formats are being configured that's now part of the game.
That's why so many professionally produced corporate shows hire a dedicated projectionist for the video presentations. Too many bugs in the honey.
Refresh & sesolution are the first things to look at.
Just so you know that colors in PowerPoint PC, and PowerPoint Mac, don't exactly match... go figure.
I forgot to mention another thing, sometimes it's the projector that needs to be tweaked. -
when I was talking on phone, suddenly the phone was switched off.
i tried to switch it on but it gave the message....connect to itunes for set up.
when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
What to do now?????? Customer service people say..it is hardware problemIf it's a hardware problem, then the phone will need to be replaced.
There is no magic that can fix a hardware problem. -
I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?
I assume these are POP accounts and all computers are set to remove from Server after downloading.
So on the non dominant ones... Mail Preferences>Accounts, highlight an account, Advanced tab, uncheck remove from Server, just have the main dominant one remove from server.
Or get/setup IMAP accounts. -
I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?
Do not worry about it.
Time Machine needs that your external drive is formatted in HFS+, or better known as "Mac OS Extended (Journaled)". This filesystem is used by Apple on Macs and Windows cannot read or write drives formatted with this filesystem, being this the reason why all your devices do not read the external drive except your Mac.
You can only use your external drive to make Time Machine drives. If you store anything different, you may damage the Time Machine structure, so it is better not to use it as a drive to store other data. Instead, get another external drive to do it or create a second partition on the external drive formatted in FAT32 by using Disk Utility > http://pondini.org/OSX/DU3.html FAT32 can be read by Windows PCs -
My thuderbolt display is 3 weeks old which I'm using as display for my mac mini. I no longer get the display on but can hear the sound. Please suggest.
Make sure the mini-displayport/TB plug is fully seated. It may look fully plugged in but isn't.
Make sure the Displays system preferences has an Arrangement tab. No Arrangement means the monitor is not being detected.
Do a smc reset.
If none of this works I suggest you take it back to apple (along with your mini). -
I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is that done? The MacBook Pro could even be a center channel if configured in that order.
See the following thread on the same topic:
2 Thunderbolt displays MBP = sound coming from both displays? -
I cannot open files attached to an excel spreadsheet. I am using office for mac 2011. when double clicking object I only get the picture modifier windows.
Preventing Microsoft Office to open recent documents at startup in Mac OS, Please see:
http://www.frenchguys.com/wordpress/preventing-microsoft-office-open-documents-startup-mac-os-lion/
It seems that the solution works for most people.
In a terminal, enter the following:
defaults write com.microsoft.Excel NSQuitAlwaysKeepsWindows -bool false
Maybe you are looking for
-
Weird sort order for tracks / songs on walkman
hi all just browsing through the various ways of viewing songs on the walkman app (i.e. by artist, album & song) and I've realised that some tracks are not sorting correctly. I know that would suggest a problem with their tagging but I don't think it
-
I own an 80gB iPod classic that I used to sync with a Mac. I have recently lost access to the Mac and have had to back to using my laptop with windows XP. I can't sync it because that would involve having to format my iPod and therefore lose all my l
-
hi all, can u pls explain the diff between oracle 9i and 10g thanks in advance
-
Missing control on compiled labview program
I recently compiled a very simple VI. The VI front panel contains a boolean switch. If the executable is run from the machine where it was compiled everything looks fine. However, when the executable is moved to a network drive and run the boolean co
-
Newbie - Help needed starting with Threads
Hi Friends, I have a class which extends thread and all it does is displays its name and then goes to sleep. So, I have this in my run method: public void run() { System.out.println("Name: "+name); try{ Thread.sleep(1000)