Using Multi Mode in Omnisphere without "maxing" out my Mac

Hi,
I use Omnisphere a lot when I am creating multiple keyboard parts for tracks I am producing/session-ing on.
But because I usually use about 6 different omnisphere parts in a track it really puts the pressure on my Mac and decreases performance.
I usually create a Omnisphere track and then hit the "create the same track again button" and then open up that instance of Omnisphere and then create my next part and make sure that the midi channel for that track is set to 2.
And so on....
Is there a better way to do this? I.e. Run one instance of Omni and have blank tracks set up that i don't have an instrument set, but can just use the MIDI info from. Because that's what i am doing, but I can't get that track to talk to Omnisphere.
Not even sure that I can communicate what i am trying to say...but if you understand what i'm trying to say....help would be appreciated.
Thanks in advance.

When you create a new track in Logic, check the MULTITIMBRAL box and put in 8 for the number. It will create one instrument with eight tracks.

Similar Messages

Has anyone maxed out their mac?

i ask this out of curiosity for the bigger and faster machines. i can understand the needs and wants for faster, but has anyone maxed out their mac? and with what? i have lots installed and running on mine im sure not as much as a lot of people, but i still have lots available. so jsut wondering about the need for 200g

15-20gb is gone off my drive just for parallels, i have about another 15gb dedicated to music, another 10gb for movies and tv shows. My mbp has just a little under 6gb left free, but this is only due to constant clean up of "temporary" (eg - not useful to me anymore) files. I had opted for a 100gb 7200rpm drive, I now almost wish I had went for the 120gb option.

Using one VLAN over several WLANs without maxing out controller

Hi,
I need to provide several WLANs that need to have different SSIDs, but can all go on the same VLAN.
An example would be if i have 40 schools and one large, flat guest LAN that I want to use for them all. I'd like to put (SSIDs of)school0001, school0002, school000n etc onto this same VLAN without breaking my limit of 16 WLANs on the controller.
Does anyone know if the cisco 4404 (or 5508) can do this? and if so, how.
Thanks in advance,

The 16 wlan limit is hard set.
Here is a good reason why:
"... limit the number of service set identifiers (SSIDs) configured at the controller. Based on your access point model, you can have configured 8 or 16 simultaneous SSIDs, but as each WLAN/SSID needs separated probe responses, and beaconing, the RF pollution increases as more SSIDs are added. The results are that some smaller wireless stations like PDA, WiFi Phones and barcode scanners cannot cope with a high number of basic SSID (BSSID) information. This results in lockups, reloads or association failures. Also the more SSIDs, the more beaconing needed, so less RF space is available for real data transmits. "
from
http://supportwiki.cisco.com/ViewWiki/index.php/Wireless_LAN_Controller_%28WLC%29_Configuration_Best_Practices
You may want to consider using multiple controllers & limiting the # of wlans per controller.
You should also check into AP groups to limit what wlans are broadcast on what APs to help control the rf pollution where possible.

2012 Mac Mini - Using multi-output device?

I'm trying to get my Mini to output sound over HDMI and the headphone jack. This question has been asked before, but the answer wrongly claimed OSX didn't support it. The Audio MIDI Setup program (in the Utilities folder) does in fact let you set up a multi-output device that uses the headphone and hdmi out. But when I try to output sound with that device, I don't get anything.
Before I bought this computer, the Apple Store drone claimed this multi-output was possible. But this wouldn't be the first time I've talked to a complete idiot there.

Some more updates:
using multi-output and having the line out set as master prevents 5.1 surround from being output on HDMI, which is fine for my use. When I have something plugged into the headphone jack (in my case wireless outdoor speakers) the settings app won't even allow the settings app to choose HDMI as the audio output device, which is also likely why HDMI can't be master in the MIDI app.
So to get 5.1 surround back for movies I need to unplug whatever's in the headphone jack and change the output device from the multi-output option to HDMI. It's sad my 6 year old PS3 handles this more elegantly and sensibly but at least I don't have to take back my Mini now

Maxed out Mac Pro (nearly new) DEAD SLOW - why???

*I have always been a PC guy (animation and film production is what I do -- www.speedbumpstudios.com) but I decided to bite the bullet and go Mac. I maxed out my Mac Pro-- if it's available, I got it. It's a 15,000 machine. Great. So I've had it for a few months and the thing is so dead slow I am finding it almost unusable. My three year old PC laptop kicks its butt. Here are the symptoms.*
*Opening Photoshop takes anywhere from 1 to 3 minutes. Once it is open, if I try to open a file, it takes another couple of minutes for the finder to pop up so I can search for it.*
*iTunes regularly hangs and/or takes several minutes to load. My iPod, which is also new, sometimes cannot even connect to it (error).*
*HP scanning software takes minutes to open. Once the scan is ready to be saved, it takes minutes for finder to even offer the option to name the new file.*
*Almost all the software on this thing starts up painfully slow.*
*IMPORTANT: I have noticed that the machine runs almost all right immediately after a restart. The longer it runs, the worse these symptoms get.*
*ALSO IMPORTANT: -- I had been running Boot Camp on the machine, allowing me to boot into Windows XP. Recently bought Parallels and ran that. While this Mac never ran great, the problems seemed to get markedly worse at that point. I have since, out of desperation, removed Parellels completely, but the problems persist.*
*I am, of course, sick about how much I am paying for this machine that is supposed to be the best available and it about as useful as a boat anchor. WHAT SHOULD I DO!?*

George, I feel your pain. I too have a maxed out Mac Pro;
Mac Pro - 8 Core (Dual Quad-Core 3GHz)
16GB RAM (Crucial Memory)
4x 750GB Drives
ATI 1900x Vid Card
2x 30" Cinema Displays
etc etc etc .... I even have a 2-port eSATA cables installed (OWC) with a 1.5TB external drive (Iomega, and fast as the dickens!)
My machine has been in the Apple repair facilities THREE times so far (I am working with an executive relations person for 3 months now) and we are about to swap it out for a new machine because the term "ghosts in the machine" apply to many Mac Pros. In fact, the last time Apple fixed this machine was yesterday, replacing a bluetooth module, and as soon as I booted the machine it started having kernel panics (for the first time), we thought it was the RAM Riser cards being seated wrong... after making sure everything was seated properly, and doing a complete OS reinstall, it is still kernel panic-ing every hour (if I let the machine sit quietly)...so, there is a ghost in this machine that does not want to go away.
To get your situation though, MY machine has ALWAYS been much slower than the dual-G5 I replaced last April. You are not alone here. This is an 8-Core machine, ran Tiger slow and is now running Leopard only about 20% faster, which is still slower than the G5. Makes me want to cry sometimes because I paid, what, $1300 for the processor upgrade alone?
Something is wrong with your machine. I suppose you have already tried to reinstall, reformat your drives, correct permissions, etc and still found your machine wanting in the ways of speed, right? What you need to do is to contact Apple Executive Relations and tell them what is going on. Once they see that you ordered such an expensive machine (no one buys extra RAM from Apple so they will sympathize right there!) they WILL contact you and work with you until your problem is solved. The only reason they have not replaced MY machine yet (they will usually do so after the 2nd or 3rd repair attempt) is because in my case I cannot afford the downtime. Now, however, I think we have to because no one can figure out why this machine is having panics after sitting still for an hour.
Anyway, be assured this is NOT representative of Apple or the Mac Pro speed. Mac Pro's are plenty fast, and unbelievably fast with newer, Intel-based software (CS3), and even though Leopard has many many bugs it is faster than Tiger. My partner has the same machine as I do and it is so fast I think it does most of his work before he even arrives in the morning.
Work with Apple, let them fix your machine or replace it. They will.

How do I play a video in full-screen mode on one screen of a dual-screen Windows 7 system without blanking out the other screen?

How do I play a video in full-screen mode on one screen of a dual-screen Windows 7 system without blanking out the other screen? Not losing the other screen would be useful as I would like to, for example, monitor my emails whilst watching a video or to work on a project whilst watching an instructional video.
Note : Resizing a window to fill the screen is not acceptable as it still leaves unsightly borders.

bump

Processor maxed out when starting RT application in development mode.

When I go to run my RT application on my 8145RT board in development mode, one of my dual-core processors stays maxed out for 2 or 3 minutes. I added a break-point at the very begining of the code to make sure it was not something related to the execution of my code. This only happens if I make a change to the code and have to re-download it.
I am using LabVIEW 2009.
Any ideas?

I know this behaviour and I think (but I'm not sure) its a bug which is allready reported. Right now I'm out of office and cannot access the DB to check the CARs number, but as soon as I'm back I will check and update you here.
Christian

I have not been able to use iTunes for several months. Every time I open iTunes, it freezes by computer such that there is about a minutes between each action. I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory.

I have not been able to use iTunes for several months. Every time I open iTunes, it freezes by computer such that there is about a minutes between each action. I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory. Help! I can't access my iTunes content.

I have not been able to use iTunes for several months. Every time I open iTunes, it freezes by computer such that there is about a minutes between each action. I am running iTunes 11 on Mac OS 10.6.8 and have a computer with maxed out memory. Help! I can't access my iTunes content.

Dear sir I have 2 iPhones , I downloaded find my iphone and find out there is another iPhone on my Apple ID and in another location in same city Erbil which I live and I tried to use lost mode but it is still not stopped

Dear sir I have 2 iPhones , I downloaded find my iphone and find out there is another iPhone on my Apple ID and in another location in same city Erbil which I live and I tried to use lost mode but it is still not stopped

It could be that someone has accessed your AppleID/iCloud account with out authorization. Or it could be that you forgot to remove find my iPhone form a phone that your previously owned.
Change your Apple ID password.

How do I get my iTunes (both purchased and cd's) into the cloud as I cannot use match my iMac and MacBook are too old to use the right OS and maxed out RAM memory upgrades, but have iPhone 4S and now 64gb iPad and libraries on desktops plus iPod!!

So very excited bought iPad and new speakers today! Want to get all my music sorted as across iMac (G5), MacBook os 10.6 (maxed out ram and memory) and old iPod. Saw Match would be an option but can't use due to old OS so I can get the raw music library files but then what do I do to get all in one place? Any help appreciated.

A good route would be to attach a USB drive to the macbook. You can use the drive to assemble a copy of all of your music from your various devices. iTunes on the macbook can be used to create a new library, located on the USB drive, into which you can import all of your music.
Two major benefits:
1. From here you can run iTunes Match across your entire music collection; and
2. You will have created a full local backup of all of your music on the USB drive.
Once complete you will be able to access the music from any iDevice capable of running iTunes Match, Do remember as you add music it is important to maintain a local backup in order to keep your music safe.

HT1689 i have my daughters iphone 3, i want to use it as an i-pod, but it keeps receiving messages from some her friends is there a way to stop this from happening, please help, my phone is maxed out and would really like the storage for music, thanks

i have my daughters iphone 3, i want to use it as an i-pod, but it keeps receiving messages from some her friends is there a way to stop this from happening, please help, my phone is maxed out and would really like the storage for music, thanks

It sounds like it still has her information on it, so it might be efficient to navigate to Settings, then General, then Reset, then Erase All Content and Settings. You can then set up the phone again, using your information. This way the phone will be yours, officially, and her data and information will be removed.

HT1947 If you add music VIDEOS to Up Next playlist, then go to look at the album cover playing screen, then go to add another song from diff playlist, no longer can see Up Next, just go to full screen mode button. Using remote app iphone 5 to play out of

If you add music videos to Up Next playlist, then go to look at the album cover playing screen, then go to add another song from different playlist, you no longer can see Up Next, just go to full screen mode button. Using remote app iPhone 5 to play out of iTunes. It looks like it works fine for regular music, but for music videos you can't see your up next unless you go back on the computer to change once you've left the screen. When using the remote app, you shouldn't need to go to iTunes on the PC to view or edit Up Next already added. See first image, you can hit upper right and get back to Up Next (second image). Third image is music video, where you can't get back to Up Next, just swap between full screen and not. I hoped 3.0.1 would have the answer, no luck!

wow, very nice review Makes me want to get a vision for myself.
WebKnight wrote:
<SPAN>
Add the ability to randomly select a new background from a pre selected group of photos every time the player is turned on or each day.
I would love that feature. I can't stand useing my computer with a single wall paper anymore (I have 500 anime pics that i rotate between every 2 mins ) If you could make the vision rotate background every x minutes or every time the player is turned on, it would be totally amazeningly sweet!!!! (i might have to go out and buy one then :P)
I just hope that creative has better firmware support with the vision than they have had with the touch.
Once again, great review

Multi-Mapping in IDOC without using BPM ?

Hi ,
Please check ..
Can below given blog can be used to achive Multi-mapping in IDOC without using BPM ?
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Regards
PS

Solved .. Thx every one .
Approache Used :
1. Created mapping with Change signature on target Message type(idoc) with 1..N Occurence.
2. Operation mapping with change Occurence on Target Operation(1..Unbounded) .
3. Used same Operation mapping in Interface Determination with 0..unbounded(Multiplicity).

I have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?)

i have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?) I NEED HELP BADLY PLEASE....

What version of the Mac OS X are you running. Go to the Apple in the upper left corner and select About This Mac and post the version.

Why does my memory max out at 70% (using iStat) @ 2x1GB RAM 667mhz

Hi,
I'm using iStat as a monitoring service and I have 2x1gb RAM installed and a 2.4 core2duo processor. I run multiple programs at once (Firefox, Dropbox, MS Office, iTunes) and my memory hovers around 71% all the time (it gets sluggish around 70%). It never has gone up or past 74%. I figure it should max out around 100% right? I recently upgraded to 2x2gb or 667 memory. Will I still have the same problem of hitting a threshold? How do I get rid of this ceiling? Thanks!

Hi bmose14,
I'm not entirely sure how iStat Pro monitors RAM (I always use Activity Monitor for that) but I know Snow Leopard changed how RAM is monitored. Previously in Leopard if you had, for example, 2GB of total RAM it would show that as available and then just immediately allocate the RAM that's being addressed by the GPU. But in Snow Leopard, I find that I have 1.75GB of total RAM (as it doesn't calculate the 256MB of VRAM my shared GPU is allocated).
I'm thinking you have the Intel GMA X3100 GPU (144MB of RAM) and as such that's being calculated here, in addition to the RAM being used by the programs and OS. With that being said, I don't think you can ever reach the 100% mark. I know I fired up iStat Pro on my machine (prior to responding) and I'm also hovering around ~80% despite Activity Monitor showing about the same as "green" in the pie chart.

Using Multi Mode in Omnisphere without "maxing" out my Mac

Similar Messages

Maybe you are looking for