Using Multiple AD domains with ACS

Hi,
Is it possible to use multiple domains for authentication with ACS? I need to use AAA to authenticate remote users into a centralised location but the users will be from different domains and I was hoping to use a single applicance to cater for all domains. Can this be achieved using LDAP? I understand that ACS can only be part of one AD domain.....
In essence I am hoping that I will be able to authenticate the user based on their domain\credentials.
Thanks in advance
Jason

Hi Javier,
I understand that ACS can only join a single AD domain - but can it use LDAP to authenticate users from different AD domains - I don't want to have to established trusts between different domains.
Kind regards
Jason

Similar Messages

How to delete multiple data domains with single step ?

how to delete multiple data domains with single step ?

You can go to your Endeca-Server domain home e.g.($WEBLOGIC-HOME$/user_projects/domains/endeca_server_domain/EndecaServer/bin)
run
[HOST]$ ./endeca-cmd.sh list-dd
default is enabled.
GettingStarted is enabled.
endeca is enabled.
BikeStoreTest is enabled.
create a new file from the output just with the domains that you want to delete and then create a loop
[HOST]$ vi delete-dd.list
default
GettingStarted
endeca
BikeStoreTest
[HOST]$ for i in $(cat delete-dd.list); do; ./endeca-cmd.sh delete-dd $i; done
Remember that this can not be undone, unless you have a backup.

Multiple Mail Domains with multiple IP addresses

Hello,
I am attempting to configure a mail server with 3 domains and 3 distinct IP addresses. I am currently only working with 2 of the domains.
Mail sent to either domain is received by the accounts in both domains: if I send a message to [email protected], it goes to both that mailbox and the [email protected] mailbox. I have user accounts set up in WGM for both domains.
I'm sure I have something misconfigured, but the only instructions I can find for multiple domains assume virtual domains using only one IP address.
postconf -n
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
localrecipientmaps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
mydestination = $myhostname,localhost.$mydomain,localhost,mail.tomsheehan.com,tomsheehan.com,ma il.19north.com,19north.com
mydomain = tomsheehan.com
mydomain_fallback = localhost
myhostname = mail.tomsheehan.com
mynetworks = 127.0.0.1/32,66.216.189.129/32,66.216.189.133/32,66.216.189.134/32,tomsheehan.c om
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions = permit_mynetworks rejectrblclient zen.spamhaus.org permit
smtpdpw_server_securityoptions = login
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_keyfile =
smtpduse_pwserver = yes
unknownlocal_recipient_rejectcode = 550
virtualmailboxdomains =
virtual_transport = virtual
Thanks in advance for any help I may receive!
Scott
iMac Core2Duo 2 GHz, iMac G4 700, iMac G4 800, iBook G3 900 Mac OS X (10.4.9)

Scott,
can you elaborate a bit on the final goal?
There is no need to use multiple IPs to run seperate domains. Virtual domains can handle this just fine.
You could run three different instances of postfix bound to different IPs and different configurations. (postfix -c configdir_touse start) Each config directory would have its own main.cf with the main parameters to be changed being "inet_interfaces", "myhostname" and "mydomains". However, unless you have a very specific need this is just an extra headache.
Alex

Using Multiple "Personal Domains"

I have several different websites that I have created in my iWeb 08. I currently have all of them published under the same domain file. I have purchased and use 3 different domains www.heavensdooronline.com, www.dalevillechristian.org, and www.jcdcyouth.com that are all re-directed to the corresponding iWeb website that I've created for them. I would like to know if I can use the "personal Domains" and have each of the 3 different websites automatically re-direct without having to "cloak" them so that people don't see a HUGE url, as in the past. Any help would be appreciated! Thanks!
Mark

Mark:
You can only have one site setup via the .Mac's setup option in the iWeb->File->Setup Personal Domain menu option. For the other two you'll need to have domain name forwarding established by the name provider. I think it would be best to separate the three sites into their own domain files.
I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want. With each of the three having a separate domain name this will lessen thee chance of anything getting messed up as could happen if all three sites were in the same domain.sites2 file. You might want to do some editing on a site but not publish right away. With separate files you can do that.
Also be sure to keep a frequent backup copy of the domain.sites file(s) by using Varkgirl's Automator application. You can get it Varkgirl's iWeb Tips and Tricks site.

Is it possible to use multiple hard drives with iphoto?

I am pretty new to Mac's so bear with me, I used to use multiple hard drives on my pc with my photos seperated by catagory in different hard drives. Is it possible to run iphoto with multiple hard drives without the photos loading onto my Imac? If so, How do I set it up. I have tried importing to a external drive, but when I check the file path of the photos it shows my Imac hd in the address. I seriously dont know why I cant just add the external hard drive as a library and have Iphoto work, Help

There are instructions - and not the caveats - on how to do what you want below.
However, you'e not quite grasping iPhoto:
I used to use multiple hard drives on my pc with my photos seperated by catagory in different hard drives.
When you do this, you're using the Finder (or file manager) to categorise the photos. All well and good, but why? That's exactly iPhoto's job. iPhoto is a database designed to help you manage your pics - including categorising them.
Anyway:
*How to do it:*
Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
*What Happens:*
Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
*Some things to consider:*
1. Importing and deleting pics are more complex procedures. You have to to put the files where they will be stored before importing them. When you delete them you'll need to remove the files from the HD yourself.
2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
4. *Because iPhoto has no tools for managing Referenced Files, if, for some reason, the path to the photos changes then you could find yourself resolving aliases for +each photo in the Library+ one by one.*
My own opinion:
I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers
If disk space is an issue, you can run an entire iPhoto Library from an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
If you're concerned about accessing the files, There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
If you really want to spread your photos across volumes like this, Aperture would be a better fit.
Regards
TD

Using multiple img src / with htmlText --display problem

I need help.
I am using multiple <img src /> tag with htmlText and
pictures displays in layers(overlay)?
html_txt.html = true;
html_txt.htmlText = "text<br><img src = '
http://picture1.jpg 'width='500'
height='491' hspace='0' /><br>more text<br><img
src = '
http://picture2.jpg' width='299'
height='612' hspace='101' ><br>end with text";
Is there any way to refresh text field when pictures are
fully loaded so it will display like regular html page?
this is flash version, evrything is shown but it is not
right.
http://www.sosui.jp/flash/test/v001/pages/home/homeBlogV002.swf
I want to show them like this page.
http://sosui.jp/flash/test/v001/pages/home/blog.html
I tried onEnterFrame but pictures will not show. I think it
is because it is trying to load pictures everytime. So I cannot use
onEnterFrame, i need other way to refresh text field.
Please help me. you might of guessed I am not an English
speaker, so my English might be little off.
Thank you.

does anybody know anything? how long do i need to wait to see
if someone replies? I just need to know if it is possible or not.

If I use my own domain with mobileme, does it work with google search?

I've noticed something, I used to only access my page with web.me.com/NAME and it shows up relatively at the top of of the google search results when I search for NAME or things related to me.
Since then I have started using my own domain which I have bought from godaddy.com. Now I'm not sure if I am doing it right, but at godaddy, I setup this forward to web.me.com/NAME as a 301 site move. When I type in my own domain, it gets redirected ok but the problem is it never shows up in google. It doesn't show up if i search for "mydomainname" or "mydomainname.com" or anything.
Any ideas? Does forwarding (cloak) does not work with search engines?

You are referring to IP addresses and Nameservers. You DON'T need these if you are using CNAME forwarding. They are not required.
Normally, when you set up CNAME forwarding you would delete the A record and set-up CNAME in its place. At least this is what I had to do when I used CNAME forwarding with MobileMe. I went to my DNS settings and there were A records against both @ and www. I had to delete both of these and set up new records, one for @ with CNAME that pointed to web.me.com and then the other for www, CNAME that also pointed to web.me.com.
What you have done sounds right, in that your domain name is pointing to web.me.com that is where your new website is with iWeb/MobileMe.
I think your problem is due to your old website that you created with Microsoft Office Live. You seem to have used the same domain name with this? If so, have you deleted your old site that you created with Microsoft Office Live?
I don't quite know how Microsoft Office Live works, but I know that you can create a site with them quite quickly using their templates and colour themes, although it is limited as to what you can do and probably is not as good as iWeb. Did you register the domain name through them and then publish? How do you publish to their server? You need to remove this site totally from the server so that your domain name will just be linked to your iWeb/MobileMe site.
I think the problem lies with your old site and Microsoft Office Live rather than your CNAME settings at GoDaddy. Investigate this first.

Can I use multiple credit cards with family sharing

My kids are adults. Can I use multiple credit cards in family sharing so they can pay for their own purchases?

Hello Cwb1234,
Thank you for using Apple Support Communities.
From what I understand, you want to set it up that your kids use their own credit cards for purchases within Family Sharing. Take a look at the article linked below, it outlines purchases and payments for Family Sharing and may offer a solution to the issue that you’re running into.
Family purchases and payments - Apple Support
Making purchases
After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card. As the family organizer, any receipts generated by the transaction will be sent to you. Learn more about how iTunes Store purchases are billed.
Once paid for, a purchased item is added to the account of the family member who initiated the purchase. In other words, the content belongs to them, much as it would if you were buying them a book or a DVD. If Family Sharing is ever disabled, each member will keep the purchases they initiated, even though they were paid for by the family organizer.
These are the only current options for payment within Family Sharing.
Regards,
Jeff D.

Using multiple iPhone remotes with Apple TV

Hi
Anyone knows how to use two iPhones 4 as remotes with one same Apple TV device ? I am using iTunes 10.5.0.142 on my computer. Home sharing is turned on and I can access my iTunes library with both iPhones. Home sharing on Apple TV is turned on. Each iPhone has the remote application with home sharing turned on. However, only one iPhone can also access control Apple TV as a remote.
The iPhone that not working as a remote is the one using using a different apple id that the iTunes account. Turning on the remote app, you can find the shared iTunes library ... but not the Apple TV device. What am I missing ?
I read a similar post from 2010 but did not help.
Thanks

I have four iphones and two iPads using the remote app with our apple tv. When this sort of thing happens usually I turn off wifi on the one that's not responding, close Remote then turn both of the, back on. Sometimes it takes more than one try.

Can I use multiple apple ids with iTunes Match?

My family has multiple apple ids although we share many devices. If we subscribe to iTunes Match, will it pull all the content from all the devices or just one apple id?

iTunes Match is associated with one, and only one, iTunes Store account. To use iTM on multiple devices all those devices must be signed into the mobile iTunes Store with the same AppleID.

How Do I Use Multiple iCloud logins With find my iPhone?

With iOS 6, I was able to link Find My iPhone accounts across multiple devices. Now, with iOS 7, it appears that I can now only keep track of devices that share the same icloud login.
Talk about a downgrade. I regularly use my phone to find my wife's iPad or my son's iPhone. Or should I say, I used to. Now I can only find the phone I'm using.
Awesome.

Here here! it seems to me that Apple is looking to get people to have one major iCloud account and force families to buy additional storage.. WIth 7 devices (and thousands of $$$ in devices) I couldn't possibly use one account at 5 gb for back up, 10 GB would be a stretch between my wife and I between our combined 4 devices. Why would I spend this kind of money again to put my kids in idevices when the BEST security device just got castrated? Really disappointing.

How can I use multiple email-addresses with "Administration Email Address"

What syntax should I use to have more email-adresses in the screen "Manage Service - Instance Settings - Email" after the field "Administration Email Address".
I tried:
- '[email protected]','[email protected]'
- '[email protected], [email protected]'
- '[email protected]; [email protected]'
- "[email protected]','[email protected]"
- "[email protected], [email protected]"
- "[email protected]; [email protected]"
Every time I get the ORA-29279 / 501.
Please help me with the right syntax for multiple email-addresses.
Thanx!
reg.
Chris

From a google search of the docs, it looks that that field is used as a FROM address... hence it's by definition only one address.
Administration Email Address - Defines the "from" address for administrative tasks that generate email, such as approving a provision request or resetting a password.
From http://download.oracle.com/docs/cd/B28359_01/appdev.111/b32258/adm_wrkspc.htm
Edited by: Tanjental on Jun 29, 2009 6:28 AM

How to use multiple midi controllers with Mac book pro (2 usb)?

I have a newer macbook pro that has 2 USB ports, and a lightning port and a firewireport.
On stage I will be using the firewire port connected to a Presonus Firestudio mobile to use as the interface to the house mixer.
I will use 1 USB for my M-audio Axiom 61
I will use the other for my Yamaha WX-5 Wind synth
I'd like to be able to get the apogee midi foot controller to control the playback audio. For example I'll be using it to stay in a solo section, then step on it to move it forward ot the next section when I am done soloing
I'd also like to use some sort of midi switch to turn on vocal effects of the mic.
Anyway since I only have 2 USB ports, how should I connect the 3rd, or 4th USB midi controller?
Will a USB hub work to do this? If so, will I always have to remember to use the same controler in the same exact hub input to make sure everything maps the same?
I guess I'll also have to learn how to setup multiple controllers in Mainstage as well.
Thanks
Dan

Hi there,
is a question which many of us have spent ...
I think the obvious answer is that yes you can use a hub and connect everything. however ....
sincerely advise you to buy a good hub that is well feasible, the last thing you want on stage / rehearsal is one of midi controllers stop responding, or stay with hanged notes... etc., do not buy just because it is cheap it has to be stable and viable, some bring cable for connecting wall power just to not drain power from the USB port.
Other things to try is to distribute as much equipment for USB / Midi.
For example one of midi controllers connect via USB but not by Midi outside the Presonus Firestudio. Connecting Presonus Firestudio to a single USB port as it is a main equipment.
but it really is an issue that greatly limits the use of USB devices.
Try it and tell me how it went. Good luck
(sorry for my english i´m Portuguese)

Can I use multiple iPhoto libraries with Aperture?

I've been using iPhoto to manage my photos (successfully) for many years. I have multiple themed iPhoto libraries with many thousands of photos in them (ten years' worth of digital plus another fifty years scanned). I am thinking of downloading Aperture and giving it a try (thanks to an App Store gift card).
Can I use Aperture to edit photos within these iPhoto libraries? Do the libraries become "common" to both applications, or does duplication occur? I have limited hard drive space and don't want to create large duplicate files on my iMac.
Thanks.

luba petrusha wrote:
I have some 50-100 libraries (haven't counted recently) which occupy most of my hard drive. I find it easiest to manage my photos with themed libraries (annual, trip, subject).
You could make each of your "themed Libraries" a Folder in Aperture, with all your current Projects and Albums intact. In this way, you could search across all of your Image at once (e.g.: a Smart Album showing all Images in which you've identified a Face as "Mom"; or filter for the keyword "Sunset"). In general, the more Images in a Library, the more useful that Library is. I strongly recommend one Library for each photographer (or group of photographers working as a business). Aperture has no trouble handling enormous Libraries (officially, it supports up to 1,000,000 Images, iirc).
A more advanced Library organization would replace each "themed" Folder+Projects with Albums. There is no reason to limit your "themes" to the Images in just the Projects contained in a Folder.
My general recommendation has always been to put all your Projects in one Folder (with sub-Folders as needed); and to put all your Albums in another top-level Folder. In this way you build two structures: a _storage_ structure, in which you put all your Projects, where each Project = one shoot, and an _access_ structure, where you have Albums organized by Folders into whatever groupings you need.
The newest version of Aperture (3.3.1) leans in this direction. For the first time there is a default division between Project storage and Album storage (one the Library tab of the Inspector, there are now two built-in top-level containers, one for Projects and one for Albums).
A separate issue is where on your system your Library and your Originals are stored. Aperture allows you to move your Originals to storage on external drives or other non-system drives. The limitation of the storage available on the system drive is something that all active photographers encounter at some point. (In Aperture-speak, you would convert Image's Originals from Managed to Referenced using "File➞Relocate Originals". This isn't something I'd look into right away, but rather after you become familiar with the Aperture interface.

Problem using multiple choice LOV with custom attribute in IAS 10.1.2.0.2

Hi
When aplying a multiple choice and selecting multiple selection and saving in the content area , everything looks fine .
However when looking at the page the selection is only the first one selected and not the miltiple choices I made
can someone tell me what is going on , does the miltiple selection with custom attribute
works ??
thanks in advance
Igal

Hi there,
I don't really understand what you're doing but I used lot of LOV in custom attributes on my custom items and everything works fine.
Can you explain more your problem ?

Using Multiple AD domains with ACS

Similar Messages

Maybe you are looking for