Using Multiple Airport Extremes (Not Extensions)

I get great reception in my home. I bought 2 figuring I'd need a WDS.
However, now that I have 2, I'm wondering if I can set another one up remotely with a printer or a hard drive. I'm just wondering how to configure such an animal? Would that be considered a WDS.
I do not want to compromise speed since I'm thrilled with the speed of my current setup?

You can configure them to join the current wireless network as clients. Use the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

Similar Messages

Using multiple airport extremes

I have an extra airport extreme. can I use that instead of buying airport express to extend range?

There are a number of ways that you can extend the AirPorts. Please check out the following Apple Support article to get a few details on those options to see which would work best for you. If you still need any assistance with any of them, just post back.

Using an AirPort Extreme as a client to a Cisco AP?

We have a single computer and network printer in a separate building that we'd like to connect wirelessly to the main building. We have an existing Cisco 1310 access point on the main building. The plan is to connect the remote computer and printer to the switch on the AirPort, and have the Airport connect wirelessly to the Cisco 1310. We successfully tested the wireless link by connecting a MacBook Pro to the Cisco, so we know they are within range.
computer/printer <--wired--> AirPortExtreme <----wireless 11g, wpa2 psk----> Cisco1310
The Cisco uses WPA2 with a pre-shared key. I configured the Airport as a bridge to extend the network. The Cisco log seems to show that the AirPort is connecting:
DOT11-6-ASSOC: Interface Dot11Radio0, Station 001e.527a.0000 Associated KEY_MGMT[WPAv2 PSK]
The AirPort, however, does not seem to be routing packets across the wireless connection. The indicator light is blinking amber.
First, is this a configuration that should work (using the AirPort as a client on a Cisco network)?
Second, if it should work, what are the critical configuration settings?
Thanks for any suggestions.

What is the difference then between "Extend a wireless network" and "Participate in a WDS network" wireless modes? I wasn't familiar with WDS, so I have been trying the "Extend" mode.
The "Extend a wireless network" is a new feature that came out with the new 802.11n AirPort Extreme Base Stations (AEBSn), which allows for extending the 802.11n network (wirelessly) by using a second AEBSn. WDS, on the other hand, operates in the 802.11b/g radio band and allows the ability to extend a wireless network with other non-"n" AirPort (& a very few non-Apple) routers.
Just to clarify:
I'm using an AirPort Extreme, not Express.
I don't want the AirPort to work as an access point itself. I just want it to work as a bridge between its own wired ethernet switch, and the Cisco AP.
Sorry, for my confusion. To operate as a "bridge" in this configuration, the AEBSn would still need to be connected via Ethernet to the Cisco router. The AEBSn, unlike the AX, does not offer a "wireless client" mode nor can you use it's "Extend" or "WDS" capabilities with the Cisco router.

I have Verizon FiOS service for phone, internet and TV but I only have one TV hooked up for it for just basic cable service with no DVR and no need for widgets. Can I use an Airport Extreme as my router and not use the FiOs router?

I want to use an Airport Extreme as my router. I currently have a Verizon FiOS router. I have Verizon for phone, internet and TV. However, TV-wise, I just have a basic service for one TV with just a regular box. No HD, no DVR. Don't need access to a menu, widgets, on-demand. Can I eliminate the FiOS Router and just use the Airport Extreme and still have phone and internet?

I know that it will increase my wireless coverage in my house but will it increase the speeds?
Not sure what you are asking here. The AirPort Extreme is only going to be as fast as the Internet connection that it receives.....which is 75/75. It cannot take a 75/75 connection and make it go any faster.
If you locate the AirPort Extreme in an area where you need more wireless signal coverage, the AirPort Extreme would deliver 75/75 in that area. But, keep in mind that the AirPort Extreme must connect to the FIOS router using a permanent, wired Ethernet cable connection.
If you are asking if the AirPort Extreme can wirelessly connect to the FIOS modem router, and extend the FIOS wireless network, the AirPort Extreme would not be compatible with a FIOS product for that purpose.

Nas on airport extreme not recognized by time machine. same nas was previously used as time machine backup on different airport extreme. are there any configuration files that i can delete to fix this problem ?

nas on airport extreme not recognized by time machine. same nas was previously used as time machine backup on different airport extreme. are there any configuration files that i can delete to fix this problem ?

Time Machine has been working just fine, but in the last week or two it has given up the ghost. I reset the connections to the drive, and it will basically save a few bytes of data and then hang.
Although Apple originally announced, prior to the release of the first 802.11n AirPort Extreme Base Stations (AEBSn), that it would support Time Machine backups to AirPort Disks, they removed that option before they did finally release the base station for sale.
Since then, Apple has posted (as you have noted) that they DO NOT support Time Machine backups to AirPort Disks. As far as I know, they have not changed from that position and those who do these backups find that they become corrupted over time. Sorry, but it sounds like you just confirmed that for yourself.
1) Has one of the recent updates either on the AE (firmware) or OSX disabled this function?
No. Again, this feature has never been supported by Apple for every generation of AEBSn released.
2) Are there any changes I can make to get this working again?
If your data backups are critical to you, then you will want to use a different solution for your Time Machine backup destination drive strategy. I would suggest that you connect your WD My Book directly to your Mac in the mean time.
Your other options would be to either use a Time Capsule (which interestingly does support TM backups to AirPort Disks) or a non-Apple solution like the Drobo FS or HP MediaSmart server.

Airport Extreme not connecting to AT&T DSL, not using a modem

It seems that all the fixes I read are about are bridging a modem but I do not have a modem. I unplugged my Netgear Router and plugged in my Extreme and my Mac Book pro sees the Extreme but no internet. Amber light will not turn green.

The Netgear device that you had was a modem/router. In other words, a modem and router.....two devices.....both combined into one package.
The AirPort Extreme is only a router. You will need a modem if you want to be able to access the Internet with the AirPort Extreme.
You will need to use the AirPort Extreme in conjunction with the Netgear device, or you could contact ATT and ask them to provide you with only a modem, if you no longer have the Netgear device, or do not want to use it.

How do I use my airport extreme with my FIOS router?

How do I use my AirPort Extreme base station with my FIOS Router to extend my network? I have hard disks connected to my AirPort Extreme and would lik to access them.

Probably can't answer all your questions - but.... I use a Linksys (wired and wireless) router as my primary entry point for FIOS. I use a Time Capsule and an Airport Express as a common wireless connection. So I have two visibile wireless networks and use them both depending on where I am in the house. Both the TC and AEx can be seen either wirelessly or wired from the entire network. Note - the Linksys provides all the DHCP - you set the apple routers as "bridge mode."

(How) can I use my Airport Extreme to send FLAC files/iTunes to my stereo?

(New to this topic.) Is it possible to use my Airport Extreme Base Station to send FLAC and iTunes music files to my (ParaSound P3/A23) stereo system wirelessly?
If so, how?
(Not interested in iOS devices doing this - just, effectively, in using my 'mid-2011' 2.7 iMac (10.7.3) as a music server
TIA!

Yes, add an AirPort Express and convert FLAC to Apple Lossless and iTunes will be able to play them. VLC will not help since you need iTunes to connect to the AirPort Express and VLC will not work with iTunes.
There may be an exception to this but I've never tried it. You could try using AirFoil to connect to the AirPort Express and play your FLAC files that way but I have no guarantee it will work. AirFoil seems very flexible so it may prove to be a solution for you.
I'm not familiar with the Sonos Bridge/Connect system so I cannot comment on the quality. I understand that it is comparable to using the AirPort Express but locking at the price it seems a more expensive solution for your needs.

Silly question, maybe. I want to change from Verizon DSL to cable, but cable company doesn't supply router. can I use my Airport Extreme as wireless router?

We currently have the following wireless home-network configuration, powered by Verizon DSL.
2 macbook pro’s
1 emachine
HP PhotoSmart 6122 all-in-one printer
Apple TV
Apple Airport Extreme Base Port A 1408
Westell 7500 router
Thinking I’d get wider wireless coverage throughout my 2 bedroom home, I purchased the Airport Extreme. It is connected to the router via its sole usb port. The result was only a tiny increase in speed, and no increase in coverage, so I don’t know why I have it.
We now want to change from DSL to cable, thus ditching Verizon. Our new cable provider supplies the cable box, but no router for wireless networking.
Here are my questions.
Can I use the Airport Extreme (AE) as a wireless router?
If so, how should I hook it up? Should the usb cable go from the AE to the cable box, and all the other devices connect wirelessly?
If not, how should I be using the AE to some advantage? What can I get out of the investment?
Thank you very much for your help! Beatriz

What I wrote has nothing to do with what the cable company charges for their installation. And, usually they will help with the router setup even if you supply your own router. I don't know what they will charge for the modem.
Note that you need to get just a modem. You don't want a modem/router combination. That will make using an AEBS effectively nearly impossible. You will need to ask specifically for just a standalone modem, and that you will supply your own router.

How can I use an AirPort Extreme to expand a normal Wi-Fi router range?

I used to use my AirPort Extreme as my router, connecting it to an old modem I had. Recently, I had some problems with that modem and had it changed. Now, the new one is also a router, so I decided to use it instead of the AirPort Extreme. However, I don't want to let such an expensive router not doing anything, so I decided I would use it to expand the range of my new router/modem. Is it possible to expand the range of a non-Airport Extreme/Express router, like mine? I tried configuring it to "Expand a network", and it was even in "Bridge Mode", but even with those configurations, it's yellow light kept blinking and AirPort Utility said that it the AirPort Extreme wasn't being able expand the network, and told me to check if the normal router was on and if AirPort Extreme was within its range, and the answer is an obvious yes for both (I can assure you it's within range). Am I doing something wrong, or is it simply not possible?

Is it possible to expand the range of a non-Airport Extreme/Express router, like mine?
Yes, if you connect the AirPort Extreme to one of the LAN <-> ports on the modem/router using a wired Ethernet connection.
Extremely unlikely if you are asking about having the AirPort Extreme connect wirelessly to the modem/router and extend or repeat the signal in that manner.
The reason for this is that Apple designs their routers to only the extend the signal from another Apple router wirelessly.

Can I use an airport extreme to extend the range of my wireless modem

Can I use an Airport Extreme to extend the range of my wireless modem?
At one end of my house I have a dual band wireless ADSL modem which provides my internet connection and I want to extend (improve) the wireless coverage to the other of the hosue where my Apple TV (2nd gen) is located. I have being trying to extend my wireless network with an Airport Extreme but so far without success. I can get the Airport to join the wireless network, but I suspect that it is only acting as another client and not actually extending the wireless range. There is a setting in the Airport configuration to "extend and existing network", however when I choose this option the Airport no longer connects to my existing wireless network and I am beginning to suspect that this fuction only works with another Apple device (Airport Extreme or Express).
Has anyone been able to extend the range of a third party wireless router / modem with an AirPort Extreme? If so, any advice that you can offer wold be appreciated.
Regards
Michael

Thanks Tesserax,
Your answer has confirmed my suspicions.
Option 1 from your suggested solutions is not a goer because the modem and Airport Extreme are in different parts of the house making it impractical to run a cable between the two devices.
I did try option 2 and bought a Netgear range extender, which according to Netgear it would work with my D-Link modem - not.
However I have managed to work around the problem (sort of) by using the Airport Extreme to create a wireless network between my iMac 27 and my Apple TV. The idea is that the iMac will act as a router between ethernet connected ADSL modem and the wirelessly connected Apple TV.
The good news is that I am now able to play the content from my iTunes library on my Apple TV without interruptions due to a poor wireless connection . Although the connection from the Apple TV to the internet is not working I think this is most likely just a configuration issue and for me it is not really a show stopper.

Can I use the AirPort Extreme as a wireless extender to my Time Capsule ?

Can I use AirPort Extreme as a wireless extender ? I own a Time Capsule and want to extend my wireless network using the AirPort Extreme just because both have wifi AC. Also, does the AirPort Extreme need to be hook up via Ethernet if I extend

The problem with extending using a wireless connection between the Time Capsule and AirPort Extreme is this.......
The extender can only "extend" the speed of signal that it receives. The signal starts to lose speed as soon as it leaves the Time Capsule, and the signal will lose quite a bit of speed as it passes through the ceiling due to the thick construction. The ceiling presents what is known as "interference" to the wireless signal.
So, the signal has slowed somewhat by the time that it reaches an AirPort Extreme that would be installed on the main floor. That AirPort Extreme acting as an extender can make the signal that it receives go further, but it cannot make it go faster. A better term than "extender" really might be "repeater".
If you install an AirPort Extreme on the main floor, the signal upstairs will be stronger than it is now, and depending on how many obstructions there are between the AirPort Extreme and the upstairs area, the signal may be noticeably faster upstairs than it is now as well.
With wireless connections between devices, there are always so many compromises and variables involved that it is just not possible to predict what the actual performance might be in your home until you try things out in your home. For that reason, it is always a good idea to understand the store's return policy in advance in case a new item does not deliver the performance that you are hoping to achieve.
Now, let's say that you are able to pull an Ethernet cable from the Time Capsule to the main floor, and the AirPort Extreme is connected there in a nice, central location. Then, you could expect to receive about the same performance on the main floor that you receive in the basement, since the AirPort Extreme is receiving a full speed signal over the Ethernet cable from the Time Capsule. You can run an Ethernet cable about 330 feet, or about 100 meters with virtually no signal loss.
The performance upstairs will improve as well, since the AirPort Extreme has a full speed signal to broadcast....not the slower speed signal that would receive from the Time Capsule if it connects using wireless.
If you want to achieve the same type of performance upstairs that you have in the basement and main floor, then you will need to pull an additional Ethernet cable up to the upstairs floor and add another AirPort there.
That would probably be the "best" wireless network system that you could install if you are looking at all the options. Few of us are lucky enough to be able to install the "best" network, but those that are receive remarkable wireless performance in return for their investment.

Airport Extreme not showing up after switching to extend the network

I have an older Airport Extreme that I am trying to setup to extend the network from my uverse gateway. When I restore the AE to factory settings and set it up to extend the network, it goes through the process and then flashes amber. Also, it takes several tries for the AE to even show up at all in Airport Utility. The AE is version 7.6.4. I am running on Mac with 10.10.1
Thanks

When two wireless routers.....the Uverse in your example, and an AirPort Extreme......are located a few rooms apart with both configured to create a wireless network using the same wireless network name and password, then things will behave as if you have one "big" network.
Although the AirPort Express is technically creating a separate network, the fact that it is using the same wireless network name and password will make it behave as if it were extending the network to provide more range. This is technically known as a "Roaming Network".
Also are you suggesting to not use the uverse gateway as a wireless router but to use the AE as such?
No, since you indicated in your first sentence that you wanted to use the older AirPort to extend the network. It could not "extend" the network if the Uverse gateway was not already producing a wireless network signal, since there would be nothing to extend.
Now, if you do want to turn off the wireless function on the Uverse and only use the AirPort Extreme, that is an option, but you will have a much "smaller" network range wise, since you will only have a good wireless signal when you are in range of the AirPort Extreme.

Will I be able to use my Airport Extreme model A1143 with Xfinity's ARRIS model TG862G/CT wireless modem? If so, how? I want to keep my airport network setting if possible.

Comcast has been hounding me to upgrade to their newer modem in order to obtain maximum bandwidth with changes they've made. They sent me an ARRIS Wi-Fi modem (model TG862G/CT). I was not expecting the modem to have wireless and would prefer using my Airport Extreme (model A1143). I have not attempted to connect the new ARRIS yet. Should I send the ARRIS back or is there an easy way to make use of it while keeping my Airport Extreme fully functional?

Thanks, I will look up "bridge mode" after I log off here. In the mean time, what if I were to simply buy the newest AE—will I still be able to use "bridge mode"? I imagine Comcast would prefer that I use their equipment and will eventually leave me no choice, but until that happens I would prefer to use Apple's AE. What is your expert take on this?
Any AE will be able to do bridge. There is actually very little difference between your ancient AE and the latest AE in terms of functionality.. Apple is minimalist.. so change can be avoided.. no need to add functions that were always missing.
I was thinking the printers are USB?? Is that incorrect.. are they wireless or ethernet? Any native network printer can be simply connected to any router.. it will perhaps be slightly easier in an Apple environment to use them on an apple router but the difference should not be huge..
USB on the other hand is tricky.. you will need to use some router that allows print serving from USB.. that still works fine whether the AE is bridged or in router mode.
Netflix is no problem either.. (assuming you are not trying to bust a geo-block).. the actual netflix login is stored in the TV.. the only security info on the AE is the wireless connection and that can be swapped to any wireless router. No biggie.. geoblocking is a biggie.. tell me if that is the case.
It is really up to you.
1. Do nothing.. let Comcast squark all they like.. they are still providing you a service you can use. They are not going to cut you off if you still keep paying the bills.
2. Change the modem for the new one they sent.. this involves a lot of network modification .. but in view of the age of the current devices.. will have to happen in the near future regardless.
3. Return the modem router and request a pure modem.. to give you as little network impact as possible. You will simply change old modem for new one. However at some point the Gen1 or 2 AE will die.. and the rest of the network will need updating.. you are putting off d-day. Modern wireless routers have come a long way since Gen1 or 2 AE.
Take your pick.. Bob says 3. I say 2 or 3. It makes little difference as at some point the network needs a refresh.

Can i use an airport extreme card in a powerbook 400MHz ?

i have an older powerbook 400MHz which is second hand and i have no manual for it. does anyone know if i can install an airport extreme card?
powerbook G4 Mac OS X (10.3.9)

wcslingsby, Welcome to the discussion area!
No you can not use an AirPort Extreme card with your PowerBook.
Your PowerBook G4 400 MHz requires the original AirPort card.

Using Multiple Airport Extremes (Not Extensions)

Similar Messages

Maybe you are looking for