Using multiple XML Connectors with a single trigger

I have an application, which I inherited, and it had used a
HUGE XML file, and has not been performing properly. Mgmt accepts
that the size of the XML is the problem and wants it split up, but
have it still work as if it were a single file.
The question posited to me was: Can I set up multiple XML
connectors and have the correct one triggered after a selection is
made from the Combo Box?
I am only an intermediate user and am getting these things
only because the other developer is retiring. Thank you for any
ideas/assistance.

Hello aps7828:
If I read that correct, you only get the error when you run the executables and not the VIs. Can you take a look at your processor level while one .exe is running. I am wondering if that is the source of the problem.
Regards,
Roland A.
Applications Engineer
National Instruments
Check out VI Roadshow

Similar Messages

Blue Screen (STOP: 0x00000050) when using multiple Agilent34970A devices with a single GPIB

Hi,
I am using two test fixtures that contain two Agilent34970A Multimeters and two Sorensen Power Supplies (each test fixture is contaning one Multimeter and one Sorensen Power Supply) that are connected via GPIB cables to a single PCI-GPIB card. Below I have attached two VI's. GPIB_Communication_Experiment_1.vi (Test Fixture 1) and
GPIB_Communication_Experiment_2.vi (Test Fixture 2) are used to run self test on the
Agilent34970A multimeters. GPIB_Communication_Experiment_1.vi is talking to one of the Agilent Multimeters and one of the Sorensen Power Supplies (Address 9 for Agilent Multimeter and Address 2 for Sorensen Power Supply) whereas GPIB_Communication_Experiment_2.vi talks to the second Agilent Multimeter and its Sorensen Power Supply (Address 10 for the Multimeter and Address 3 for the Sorense Power Supply).
The Problem occurs when I try to run these two VI's simultaneously where it generates a "blue screen of death" with a Technical Information : STOP: 0x00000050 (0xF8AC00440, 0x00000000, 0x8041889, 0x00000000).
This Problem only occurs when trying to run the executables that were built from the attached VI's.
I have tried to use VISA CLEAR within the while loop as you can see in the VI however it did not improve things.
I have also uninstalled and re-installed the software for my PCI-GPIB card but that seemed not to work either.
At this point I am confused. If I try to run only one Test Fixture at a time I have no problem doing the Self Test on the Agilent Multimeter, yet every single time if I try to run the two test fixtures together I am gettig the blue screen.
Besides the two executable VI's I have also attached the regular VI's
I would really appreciate your help, thanks in advance for your time.
Attachments:
GPIB_Communication_Experiment_1.vi ‏23 KB
GPIB_Communication_Experiment_2.vi ‏23 KB

Hello aps7828:
If I read that correct, you only get the error when you run the executables and not the VIs. Can you take a look at your processor level while one .exe is running. I am wondering if that is the source of the problem.
Regards,
Roland A.
Applications Engineer
National Instruments
Check out VI Roadshow

How Can I Use Multiple Weblogic Instances in a Single OS

Hello Everyone,
Actually I have to install Some different applications. Few of them need weblogic 10.3.6 and others need 10.3.4. The OS am using is Oracle Enterprise Linux 5.
Now I am able to install 2 separate(One of 10.3.4 and 10.3.6) instances with two different users,In two different directories.
I have installed the weblogic 10.3.6 version with a user webadmin and installed node manager with port 5556. This is working fine.
The main problem here is :
In the second instance (10.3.4 ) installed with a a different user and gave the port number to NodeManager as 1600 and its not getting started. Its throwing error and also after some errors in the terminal am able to see that its reverting to port number 5556 only.
What might be the issue?
I have to install 2 different versions of weblogic in a single Server. But am failing with NodeManager. What Can I do to have multiple weblogic instances with multiple versions in a single server ?
Can anyone suggest a resolution for this please ?
Thanks in advance.

Pl do not spam these forums with multiple posts - How Can I Use Multiple Weblogic Instances in a Single OS

Multiple vendor payments with a single u201CYOURSELFu201D cheque

Hi,
How do we handle multiple vendor payments with a single u201CYOURSELFu201D cheque, drawn in favor of the paying banker? OR NEFT transfers in SAP.
Thanks,
M. Senthil

Hi
First things first:
1. You want to create a single payment document for multiple vendors. In such a case, you will not be able to use F110. You need to use F-53 or F-f8 in such a case. In the all the vendor masters, maintain the alternative payee with Description as "YOURSELF". There after, if you are using F-53, use FBZ5 to print the cheque in the name of alternative payee.
2. if you are using F110, multiple payment documents will be created for different vendors. In FBZP Config, you can assign the Payment Advise Form in the Payment Method Step in FBZP Config
Regards
Sanil

1 xml file to multiple xml files with 200 records in each

Hello Experts,
I have below scenario.
Please suggest me which might be the best approch to work on.
1) XML file to XML file
I will have 1 pretty huge XML file which i need to break in multiple XML files with 200 records each.
1) first approch i can have bpm in which i can split the file according to my requirement.
2) Second approch i can create 2 scenarios in which 1st scenario will pick up XML file and create multiple flat files with File content conversion. Second scenario will pick up all these flat files and create XML files.
2) XML file to XML file
Or i can have multiple files with 1 record per file and i need to merge in multiple XML files with 200 records in each.
So its kind of 1:N or M:N scenarios.
Please tell me which is might be better performance and design wise.
Or if you have any idea in any other way i can do this, then please reply as soon as possbile.
Please tell me if you have OS command for the same or some script to run or anything which i can implement.
Thanks,
Hetal

what is your senario? is it File to File?
You can use multi mapping concept without BPM. You can handle the 200 records per message logic in the multimapping.
Regards,
Praveen Gujjeti.

With Pages 5.2 how can i use multiple language types in a single document

My Macbook Air Has the version 10.9.3
I'm used to work with the old version of Page.
But now I am using the new version of Pages 5.2 (1860).
I want to know with the new version how do I use an multiple language types in a single document option.
In the old version of Pages I was using Inspector -> Text -> "More" tab -> Language: British Inglese.
In the new Pages 5.2 I do not know how to do it
Could you help me?
melo

It's not possible to tag text with multiple languages in Pages 5. Go back to Pages 4, which should still be in you iWork folder.
For the whole doc in Pages 5, use Edit > Spellling and Grammar > Show Spelling and Grammar.

What is the maximum number of samples that can be acquired with a single trigger using PCI-6036E DAQ card?

1. My PCI-6036E card has a FIFO of 1024 bytes in AI. Maximum how many samples can be acquired with single trigger for digitizing a waveform?
2. PCI-6036E DAQ card has got a AO with 10ks/s update rate? Can I generate a pulsed output with the AO of this card? I need a pulse of, say, 5 V and 1 kHz frequency.

Giri,
1.The trigger is usually for enabling the acquisition. I mean, when it is logic zero, you acquire nothing; however, when it is logic one, you start acquiring your waveform,and you can acquire continuously without having to worry about how many samples, unless you want to set your program for doing so. You can acquire continuously by implementing buffer acquisition. Finally, the FIFO that is in the board will not affect the buffer acquisition.
2.Yes, you can do that! You can generate your 5V signal with that specific frequency, and you should not have any problems, because the freq fits in the update rate.
I hope this information is helpful.
L Aguila
Applications Engineer
National Instruments

Data Template using Multiple XML's

I have a requirement to create a data template with data from multiple XML files and this is dynamic based on user selection.
Here is an example
Data Hirerachy
|-PO Header (POHeader.xml)
|-----PO Line (POLine.xml)
|-----PO Receipts (POreciepts.xml)
Now use can choose to print all children or selectively one child . I can do it by creating 3 data templates and then using the appropriate one based on user selection. I am exploring the possibility to use one single dynamic data template created on the fly and passed to the publisher.
Appreciate any pointer to achieve this
Message was edited by:
skarimis

Hey
I think I answered this on the internal forum
Tim

Multiple Form Regions with a single Save button

Hello,
Is it possible to have multiple form regions on a single page, with a single Save button that commits changes in all form regions? If so, would the forms have to be manual forms?
If that is not possible, or a bad way to go with APEX, what are my alternatives?
I am trying to avoid the user having to click through many screens to input the data. Logically each section should be in a different table, but I would like to group some of the sections together to reduce the number of pages the users need to navigate to.
Thanks in advance for your help,
Johnnie
Edited by: johnniebillings on Jun 1, 2009 9:33 PM

Hi Johnnie,
I assume that the tables are related somehow?
If so, you can create a SQL View on the joined tables (making sure that you have a unique ID for each record in the view that can act as the Primary Key), base the form on that view and then use an INSTEAD OF trigger on the view to populate the individual tables.
Andy

Multiple iTunes accounts with a single ipod?

I just bought my daughter a new ipod Touch. Will she be able to download music into the ipod from both my itunes account and from her mom's seperate itunes account, or will her ipod only be able to be associated with a single itunes account? Thanks.

You can use multiple iTunes accounts on one iPod. Just note that you can only sync with one iTunes library/computer. However, yu can manage music among different computers. See:
Using iPhone, iPad, or iPod with multiple computers

Using Multiple AD domains with ACS

Hi,
Is it possible to use multiple domains for authentication with ACS? I need to use AAA to authenticate remote users into a centralised location but the users will be from different domains and I was hoping to use a single applicance to cater for all domains. Can this be achieved using LDAP? I understand that ACS can only be part of one AD domain.....
In essence I am hoping that I will be able to authenticate the user based on their domain\credentials.
Thanks in advance
Jason

Hi Javier,
I understand that ACS can only join a single AD domain - but can it use LDAP to authenticate users from different AD domains - I don't want to have to established trusts between different domains.
Kind regards
Jason

Replace multiple space characters with a single space

Hi,
Oracle 11g R2.
Looking for a way to replace multiple space characters in a row with a single space. For example, the text "abc abc" should look like "abc abc". I tried toying with replace, but it only works for the case of 2 spaces. Need a solution for the cases where there could be 2 or more spaces.
select replace(column1, chr(32)||chr(32), chr(32)) from tablea

Hi,
If you had to do this without regular expressions, you could use:
SELECT REPLACE ( REPLACE ( REPLACE (str, ' ', '~ ')
                 , ' ~'
          , '~ '
          )     AS new_str
FROM    table_x;assuming there is some sub-string (I used '~' above) that never occurs right next to a space.
However, unless you're uisng Oracle 9 (or earlier, which you're not doing) you don't have to do this without regular expressions. As you can see, the way Solomon showed is much simpler.

Using RDF XML output with custom java concurrent program.

Hi, I started investigating the java API and did not find the way to use RDF XML output ? The goal is to use the Bursting engine to send out PDF generated from a "RDF XML" and a RTF template.
Is there someone that could help be with this ?
Thanks

Hi Jacky
Im looking to write a paper on this subject.
Basically you can write a java conc program that will take the XML output from the Oracle Report and burst it. So you could tackle it a couple of ways.
1. Have the JCP call the Oracle Report, sit and wait for it to complete then call the bursting engine with the XML and the control file. this has the advantage that its a single step for users to submit the report on the other hand you'll be writing a JCP specifically for that report.
2. Write a generic JCP that can burst any XML, a little tougher to write but will have applications all over the Apps suites.
Regards, Tim

Is it possible to maintain multiple payment formats with a single Program

Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer S

nazzu wrote:
Hi,
Is it possible to maintain multiple payment formats with in a single program.
For example let us assume that we have created 2 payments formats as 'XX-PAY1' & 'XX-PAY2'.
When i select the parameter as '1' then 'XX-PAY1' has to run else 'XX-PAY2'.
if its possible could you please tel us where to define the parameters in Setups.
Many thanks,
Zaheer SSounds like an Apps question. Start here: https://forums.oracle.com/forums/category.jspa?categoryID=3

Is it possible to use multiple hard drives with iphoto?

I am pretty new to Mac's so bear with me, I used to use multiple hard drives on my pc with my photos seperated by catagory in different hard drives. Is it possible to run iphoto with multiple hard drives without the photos loading onto my Imac? If so, How do I set it up. I have tried importing to a external drive, but when I check the file path of the photos it shows my Imac hd in the address. I seriously dont know why I cant just add the external hard drive as a library and have Iphoto work, Help

There are instructions - and not the caveats - on how to do what you want below.
However, you'e not quite grasping iPhoto:
I used to use multiple hard drives on my pc with my photos seperated by catagory in different hard drives.
When you do this, you're using the Finder (or file manager) to categorise the photos. All well and good, but why? That's exactly iPhoto's job. iPhoto is a database designed to help you manage your pics - including categorising them.
Anyway:
*How to do it:*
Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
*What Happens:*
Now iPhoto will not copy the files, but rather simply reference them on your HD. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
*Some things to consider:*
1. Importing and deleting pics are more complex procedures. You have to to put the files where they will be stored before importing them. When you delete them you'll need to remove the files from the HD yourself.
2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
4. *Because iPhoto has no tools for managing Referenced Files, if, for some reason, the path to the photos changes then you could find yourself resolving aliases for +each photo in the Library+ one by one.*
My own opinion:
I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers
If disk space is an issue, you can run an entire iPhoto Library from an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
If you're concerned about accessing the files, There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
If you really want to spread your photos across volumes like this, Aperture would be a better fit.
Regards
TD

Using multiple XML Connectors with a single trigger

Similar Messages

Maybe you are looking for