Using 'Multisite for iWeb' and the new iWeb 09
I use multisite for iWeb by Clarkwood software to publish multiple sites I have designed with iWeb. Now that the NEW iWEB 09 has the essentially same ability (to upload/manage multiple iWeb sites) I was wondering if anyone else is using 'Multisite for iWeb' and has ran into any problems when upgrading?
Thanks!
-JKP
With the disastrous introduction of iWeb '08, I rebuilt all my websites on new, blank domain files.
I have 26 sites with each domain file in a separate folder. These are kept in a in a folder - iWeb - in a second dock.
I can launch any site with two mouse clicks - far quicker than launching Multisite or iWebsites.
I have dealt with many instances of domain file corruption in this forum and it doesn't seem to matter which method is used - splitting domain files, iWebsites or Multisite.
I followed the advice of Cyclosaurus and Suzanne of 11 Mystics and have had no problems at all.
I'm not throwing any accusations at any of the above methods of handling multiple domains - I'm just not prepared to risk using them.
Similar Messages
-
I was using an 3GS which was SYNC thru the iTunes thru my PC .. But I started using my new 4S and tried to plug in to my PC for SYNC and the New 4S is not identified by iTunes . It says "the iPhone cud not connect to iTunes for unknown reasons... Can anyone Pls help me on this as I have no way of SYNC my Contacts from the PC Out look ..
i just now logged in the icloud from browser, there when you go to contacts, you will see a settings icon to the bottom left of the screen. it does give option to export and import vCards.. i did not see outlook option though. i dont remember how i did it last time exactly.. outlook does create vcards, right?
checkout this link, it might help you: http://www.pcworld.com/businesscenter/article/242401/syncing_icloud_with_windows _and_outlook.html
hope it helps. -
Firefox will not access the internet. I have used Firefox for years and the past week I have not been able to get on the internet??? What is the problem. My interent works as I get email and can iuse Internet Explorer to access
Which version of Firefox are you using?
See
* https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can -
It can't find URL when i use HLS for vod and the vod file name contain Chinese.
It can't find URL when i use HLS for vod and the vod file name contain Chinese。eg： http://127.0.0.1:8134/hls-vod/你好.mp4.m3u8.
How does it support Chinese path?To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step. -
Why is that my PC supports all of the requirements for HD video but iTunes won't allow me to Download HD Movie. I am able to handle some of the most intense PC Games and I have HD movies Downloaded from previous versions of iTunes that work just fine. This is just stupid that iTunes thinks it knows my Computer's capibilities better than I do. Is there a way to change it?
Hi,
At the top of any Buddy List it will show Your Name or your Handle (Screen Name)
This can be changed if you click on what is shown currently and it will become a drop down.
Pic
The "Name" is taken from the Mac User Account that is logged in and the My Card in that Address Book.
So if this is your New Macbook Pro then Open the Address Book (Presumably there is only one Mac User account on this computer at the moment) and find the My Card (Head and Shoulders iCon)
Make sure the details are yours.
If the details are your brother's (Migrated info ?) then find your card and then go to the Card Menu and the option "Make this My Card".
When Adding and @mac.com name to iChat 6.x the server for the AIM login should read api.oscar.aol.com
The port likes to be port 443 with SSL ON (See Sever Settings tab in iChat > Preferences > Accounts)
Try it without SSL
NOTE: Despite the Add screen saying @Mac.com the account can get listed in the Accounts List as a MobileMe account.
I would check that the original computer or the current one is not set to allow only one Login.
9:44 PM Saturday; November 26, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
the details of the problem are as I put in the question: I cannot access the Talk talk tiscali website because when I log in I get "error searchapp". This does not occur in Outlook Express but I prefer Firefox.
Greetings,
What version of the Mac OS and what version of iCal are you running?
Are you using MobileMe calendars (or any other server based calendars like Google) in your iCal?
While you answer those questions you can try the following troubleshooting:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Once the computer is back up and running open iCal and test.
Hope that helps. -
Use airport for internet and ethernet for local?
Hi. Ive searched around and cant find an answer for this.
I have a 27" imac connected to my router and all works fine for accessing the internet.
I have several other devices close by that I want to connect via ethernet. If i connect the imac to another router via ethernet I can browse my local devices but loose internet connectivity. It is as if the imac will suspend the airport connection while the ethernet cable is connected. I don't want my second router to act as a bridge as it doesn't support N speeds.
Essentially, I want the imac to use airport for internet and the ethernet port for local files.... The only workaround I have is to unplug the ethernet cable from the back of the imac when i want to use the internet. I'm hoping it's just a DNS issue, but cant seem to resolve it.
I do not need internet connectivity for the other devices and don't see how i can do that without enabling the wireless side of my second router and then creating a bridge...
Any suggestions?It is as if the imac will suspend the airport connection while the ethernet cable is connected.
The Connection Order on your iMac is set so that if both AirPort and Ethernet are "on", the iMac will give priority to the Ethernet connection.
If you want to configure your iMac so that it gives priority to an AirPort connection if both AirPort and Ethernet are "on", give this a try:
Open System Preferences (gear icon on the dock) and open Network
Click on the small gear icon at the bottom of the connection list on the left
Click on Set Service Order and drag AirPort to the top of the connection order list
Click OK, then click Apply
Now, if both AirPort and Ethernet are active, your iMac will give priority to the AirPort connection. If you want to connect using Ethernet, you will have to turn AirPort off by clicking the fan shaped AirPort icon at the top of your computer screen. -
I am unable to create a new folder on either of my auxillary disk drives. I can access the files and folders that were there when I transferred one of the drives from a PC. Time machine uses one for backup and I want to use the other to store photos which are large files. An help would be appreciated.
Thanks for the reply. If I reformat the drive will I be able to access the files on it from the MAC. I do not share the drive with a PC. The files were originally created on a PC which I no longer use. I do want to continue to access the files put there by the PC. I would like to not have to copy them over to the MAC hard drive just to use them. The second aux drive is new and works fine because it was formatted by the MAC. I can drag and drop files there and work with just as if they were on the internal drive.
-
.Im trying to download the new itunes so i can use my iphone 5 , however , the new itunes requires Mac OS X 10.6.8 or later and i cant seem to install that onto my imac even after searching for the new update (my imac is currently on 10.5.8.
You have already seen that you cannot load the new iTunes into your 10.5.8, so as Neil says, you need Snow Leopard (current cost £14). And you'll probably need to update the disc you buy via the combo update, though that is free.
As far as the new iTunes is concerned, there's been a certain amount of grumbling so you may want to study the forums before you update. The main problem has been with album artwork which does not transfer easily. -
i have changed computers and the new user of my old computer wants to use itunes. i deauthorised the computer and uninstalled itunes. when he reinstalled itunes all my songs and apps are still there. how do i get rid of them for him?
Erase the internal drive and install a fresh OS.
(104285) -
The new appearance of the Notes App is really disappointing. I used it for lists and now it just makes my notes appear to be random paragraphs without visual separation. Am I missing anyway to customize the App?
No, you can't customize it. Try different apps available in the App Store.
-
Two questions about the new iWeb
Hi
I've got two questions about the new iWeb.
1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
thanksAh well... thanks for the quick answer
Message was edited by: Guðlogi -
I have a new macbookpro, and want to access my old (from previous mac laptop) IWeb website and make changes to it, but when I open IWeb on the new computer, it prompts me to start all over again. Can I get in to my old iWeb and be able to edit it?
Similar but different issue.....
The hard drive on this laptop, my MacBook Pro, crashed and was replace. Much of the personal data was lost. Leopard was also installed.
I have several .Mac accounts. And have sevral websites that have been created. The sites that were constructed using .Mac Homepage I can still access and edit. HOW DO I ACCESS AND EDIT THOSE SITES CREATED WITH iWeb?
Aside from the disappointment and inconveneince of having my hard drive crash and losing personal data, the service experience has been horrible. My first call to Apple care led me to the .Mac support. After no response in the prescribed "48 hours", I arrived at the Apple Store in Phoenix armed with my ProCare card. NOTHING! No one could help and I was directed back to either Apple Care or the .Mac suppofrt web pag....Apple ****.
This is the Applke nitemare the PC clones speak about.
Thanx for the help, if it ever comes.... -
Is anyone happy with the new iweb 09
Is anyone happy with the new iweb 09? Do you like the new ftp option? Are there any new templates?
Does this software fix any of the previous browser problems, like IE destroying our websites and effects not showing in certain browsers. I hope this is fixed it seemed to be the main thing that makes iweb not the best thing ever..As always, the problem is not really with iWeb but that stone age contraption that Fred Flintstone used - Internet Explorer.
I keep my file sizes down as much as I can in iWeb, add effects to images and then take a screenshot to replace this as a JPEG etc.
I then optimize and upload the files with WSM which cuts out about 30% of the unneeded stuff.
I don't use iWeb albums pages any more or any of the fancy templates.
I have quit using Quicktime for music in favor of flash.
A backward browser needs to be fed simple information. -
I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.
iWeb cannot import published files so you would need rebuild the site.
Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host.
Maybe you are looking for
-
Can I change the view of the the new SMS conversation to look like the old one
I have a Storm 9530 v5.0.0.328 Verizon and I just have done a update played with it after and like all the upgrades but the way my coversation looks in SMS. I really don't like way the text looks to much like IM is their any way to change view back
-
Phone screen is white all along the bottom
I purchased a Blackberry curve 3G on contract on 10 December from Carphone Warehouse. This is only 3 weeks ago so within my 28 day warranty period. I picked up my phone this morning and noticed that the bottom right hand corner was white. To try to r
-
Error message after chaning names of forms
We changed the names on 5 or 6 data forms yesterday (from Planning, edited the form and changed the name on the Properties tab). After the name changes, we now get the following error message when accessing "Manage Data Forms" from Workspace only. If
-
Problem with Pop up windows and struts
Hi I have problem in working with pop-up windows and struts. I have parent page which basically lists some data and has a button for adding new record. when I press that button a child windndow will be opened for data entry. The child window has subm
-
I get my email on my iPhone 4 and the new iPad but have to delete on each is there a way to sync this together