Using Music Fonts

Hello, hopefully someone can help me out. (I originally
posted to RH HTML forum and was redirected here).
I am importing MIF files into a RoboHelp HTML project with
general success, but I'm having one problem. The music characters,
which look fine in the WYSIWYG editor convert to a text font after
compiling to FlashHelp or WebHelp. (The music font I am using will
be installed on the user's machine).
I added the font to the baggage file - same result.
Works fine for compiled Microsoft HTML Help.
Is there any way to prevent my music characters from
converting to standard text when I compile to Flash/WebHelp?
Thanks for your help,
Mark

Mark,
I'm not familair with FlashHelp (perhaps you should post in
the FlashHelp forum, though people don't like cross posts).
However, when using an unusual font, I found that in HTMLHelp it
always worked when I would add the font to baggage. Perhaps
FlashHelp has a similar function - an ability to compile a font
into the help itself. This was also easier than installing it on
the end users machine - though I suppose you might need to do that
anyway for the application.
John

Similar Messages

Using Sonata Font in Illustrator on IBookG4

I'm using Sonata Font in Illustrator on an IBookG4 laptop and I'm suddenly NOT able to get all of the music notation that I can on a desktop.
For example, each character on the keyboard corresponds to each musical notation; then there is the shift + character to get more musical notation; and also option + character to get the rest of the musical notation.
I can not use option + character to get the last of the musical notation that I need.
Is it the laptop keyboard or Illustrator?
Please advise

There may be some kind of font conflict; the use of a font utility or other
tool may be warranted. This specialized use of software appears to have
limited your hoped-for replies in solving the immediate problem.
In other instances, where some keyboard combinations don't work on a
portable Apple computer (whether or not they did work, then failed, is
another matter) there is an Apple support document which suggests
the use of an external keyboard will do more than the built-in one can.
The following link may not apply to your situation, or model:
[ Apple Portables: Some Key Combinations May Not Be Recognized... ]
I'm wondering if there isn't something simple, other than managing fonts,
that could help this issue go away. I suppose you've tried routine system
maintenance such as repair disk permissions and other duties; and if
the hardware is suspect, ran the Apple Hardware Test to see if there is
another indication of a keyboard failure..? Since you say it was sudden,
I wonder if the built-in keyboard is the problem. Best of luck...!

Really strange musical fonts have appeared

Just today I was using pages when i noticed these really strange musical fonts had appeared:
There are alot more of these wierd fonts: these are just a few examples.
i have this musical creation program on my computer called Sibelius First 6: I was wondering if that was the cause.I don't use it much and am on the trial version, so I could uninstall the program if it would fix this strange issue.
Thanks

cereskit,
If you are really using 10.6.4, updating your OS may solve the problem.
It would be best to download and install the 10.6.7 combo update and then run Software Update.
Jerry

The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

How do I use a font I downloaded in my Flash game? I downloaded the font as a TTF file, but can't figure out how to configure it.

I downloaded the file from 1001freefonts.com
I've looked at many tutorials about embedding custom fonts - I'm not sure what they are achieving, they never seem to have a step about importing TTF file or anything.
Thanks!

close flash pro.
right click the downloaded font file > click install.
start flash pro.
among other ways to use that font, you should be able to find it in the properties panel when you select the text tool.

How do I use a font variation in a pages document. I no longer have the "viewer" -glyph option in special characters pane only new mbPro with Lion. I know the variation is available because I can see it in the font book. so now what I just want to be

How do I use a font variation in a pages document? or other app for that matter? I no longer have the "viewer" - glyph option in the special characters pane (under edit in toolbar). I know the varaition ia available because I can see it in my font book. I depended on that alot so I need to find a way to still use character and embellishments. I don't want to have to go back to my od computer (from2007) Please Help!

I really don't understand.
The menu item is available :
Maybe, you didn't activate the tool :
Yvan KOENIG (VALLAURIS, France) mardi 2 août 2011 23:10:17
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How do I use a font that a user of my screen saver might not have?

I am trying to do a little experiment with fonts. I downloaded a font that was not previously installed on my computer, and am trying to make a "Hello, World!" screen saver with that font(which I installed).
The problem is that I can not even use that font. When I attempt to make a "Hello, World!" screen saver with that font, it uses the default font. Here's the code:
#import "saverView.h"
@implementation saverView
- (id)initWithFrame:(NSRect)frame isPreview:(BOOL)isPreview
self = [super initWithFrame:frame isPreview:isPreview];
if (self) {
[self setAnimationTimeInterval:1/30.0];
//either my mistake is here:
hylianFont = [NSFont fontWithName:@"Ancient Hylian - English" size:20];
attrs = [NSMutableDictionary dictionaryWithCapacity:2];
//NSForegroundColorAttributeName -- [Color green]
[attrs setValue:[NSColor greenColor] forKey: NSForegroundColorAttributeName];
// or it is here:
[attrs setValue:hylianFont forKey: NSFontAttributeName];
displayer = [[NSAttributedString alloc] initWithString:@"Hello, World!" attributes:attrs];
return self;
//... more stuff I do not use...
//simply draws "Hello, World!" in green at the top right of the screen.
//meant to draw it in the different font, but draws it in the standard font.
- (void)animateOneFrame
[displayer drawInRect:[self bounds]];
return;
@end
Where did I mistype?

I think I solved the problem. I just put the font and the screen saver in a pkg file, and make the pkg file install the font. Or I guess I could keep the font in my screen saver and test it that way. Either way, I found the answer.

Is there a way to use music from multiple users itunes libraries on one iMac for a slideshow in Aperture?

I am trying to put together a slide show for a trip my wife and I took to England. I would like to be able to use music from both our itunes libraries in the slide show. I am using Aperture to create the slide show since it seems to be more versatile than iPhoto for this. Only trouble is that when I log into my username on the iMac I only see my iTunes library and similar when logging into her username. We have different music but would like to use some from each library in the slide show.

You can only use one library at a time in an Aperture slideshow, so I'd suggest to simply collect the audio that you want to use in a folder (export the songs from both iTunes Libraries) and then import this folder to Aperture. Now you have a project containing the audio files; you will see it in the Aperture Audio section of the audio Browser, right above the iTunes section.
You can use the Apperture audio just like the audio in iTunes to drag to the timeline of your slideshow.
Regards
Léonie

How to use two fonts in one passage?

I usually use PAGES to write compositions and every time i try to use another font to revise the composition, the font will change back automatically to the font that I used for writing compositions. It bothered me a lot..... How can i revise the composition with another font without change back automatically

Hi.
You can execute scenario from command line http://docs.oracle.com/cd/E14571_01/integrate.1111/e12643/running_executions.htm#BABJEHIG:
On UNIX systems:
./startscen.sh <scenario_name> <scenario_version> <context_code> [<log_level>] [-AGENT_URL=<remote_agent_url>] [-NAME=<local_agent_name>] [-SESSION_NAME=<session_name>] [-KEYWORDS=<keywords>] [<variable>=<value>]*
On Windows systems:
startscen.bat <scenario_name> <scenario_version> <context_code> [<log_level>] [-AGENT_URL=<remote_agent_url>] ["-NAME=<local_agent_name>"] ["-SESSION_NAME=<session_name>"] ["-KEYWORDS=<keywords>"] ["<variable>=<value>"]*

How can I use music for ringtones on my iphone 4?

How can I use music for ringtones on my iphone 4?

You can take any MP3 file that it 40 seconds or less and change the file extension to M4R. Then drag it into iTunes. It will appear under Ringtones and transfer over next time you sync,

Hi - how do i use iTunes to create ring tones using music in my library, hi - how do i use iTunes to create ring tones using music in my library

hi - how do i use iTunes to create ring tones using music in my library, hi - how do i use iTunes to create ring tones using music in my library

As stated... Google would be your Friend...
But you can have a look here as well...
Ringtones FAQs
http://support.apple.com/kb/HT1491
Create and Buy Ringtones
http://support.apple.com/kb/HT1693

HT4914 Can I use music that is on my iPhone 4 but not on iTunes down load to imatch

Can I use music that is on my iPhone 4 but not on iTunes? and down load to I match, then to all my apple devices?

Welcome to the Apple Community.
Yes, content purchased on your phone (or any device for that matter) will be added to iTunes Match and be made available on all other devices.

PS CS6 has a different set of installed fonts than my old PS CS4. How do I get my old fonts back? Don't like most of the CS6 fonts. Dell Precision, Windows 7. Does PS use the fonts in the Windows directory or does it use its own? A lot of my preferre

PS CS6 has a different set of installed fonts than my old PS CS4. How do I get my old fonts back? Don't like most of the newer CS6 fonts. Dell Precision, Windows 7. Does PS use the fonts in the Windows directory or does it use its own? If so, where are they in the directory? A lot of my preferred fonts show in the Windows directory but not in Photoshop, which does not display them within the program. Please help. If I get free fonts (NOT CC fonts) from elsewhere, where do I put them for Photoshop[ CS6 to use them? Thanks.

All versions of Photoshop get their fonts from your OS. Just install any missing font wherever Windows keeps fonts.
I don't do windows myself.

It seems cranky sometimes works, somtimes not. My other issue - is there a way to create a mail signature using the font I use in Outlook (or can I import that signature)?

I have a new iPhone 4s - having lots of trouble with Siri. It seems cranky - sometimes works, somtimes not. My other issue - is there a way to create a mail signature using the font I use in Outlook (or can I import that signature)? How can I find fonts availble on my phone?
Thanks for any help

Not in Acrobat unless your image is already in the PDF format.
This is a feature of forms created with LiveCycle Designer.

Why is getLineMetrics inaccurate when using device fonts* or immediately after resizing a TextField?

1. We need getLineMetrics to return correct values immediately after changing a TextField's width/height or any property that would affect the layout metrics, withouth having to alter other properties like setting the text to itself (p1.text = p1.text). Currently, if you change the width of a text field to match the stage width for example, getLineMetrics will not return correct values until the next frame.... UNLESS you set the text property.
2. We also need some kind of "stage scaled" event in addition to the "stage resize" event (which only fires when stage scale mode is no_scale), because stage scaling affects the rendered size of device fonts so dramatically that we must call getLineMetrics again. This is not the case for fonts antialiased for readability, since their size is relatively stable with scaling, as demonstrated by drawing a box around the first line once and then scaling the stage.
So those are the problems. The asterisk in the title of this post is there because it seem that TextField.getLineMetrics is accurate with device fonts, but I cannot take advantage of that accuracy without a way to detect when the player is scaled. I can only confirm its accuracy at a 1:1 scale, since there is no way to recalculate the size of the line rectangle once the player is scaled, aside from setting a timer of some sort which is a real hack not to mention horribly inefficient with no way to detect when the stage has actually be scaled.
I use device fonts because embedded fonts look terrible and blurred compared to device font rendering. The "use device font" setting matches the appearance of text in web browsers exactly. The only way to get embedded/advanced antialiased text in flash to approximate that of the device font look is to primarily set gridFitType to PIXEL instead of SUBPIXEL, and secondly set autokerning to true to fix problems caused by the PIXEL grid fit type. That ensure strokes are fitted solidly to the nearest pixel, however it still lacks the "ClearType" rendering that device fonts use, which has notable color offset to improve appearance on LCD monitors, rather than the purely grayscale text that flash uses in its subpixel rendering. Frankly, failure to use device fonts because of API issues, is the only reason why Flash sometimes doesn't look as good as HTML text and why people say text in Flash "looks blurry". I'm tired of hearing it. If the player simply dispatched an event when scaled and updated the metrics immediately when any property of the text field that would affect the metrics is changed, then we could all happily use device fonts and Flash text would look great. As is stands, because of the two problems I mentioned in the opening paragraph, we're stuck dealing with these problems.
If you create two text fields named "p1" and "p2" for paragraph 1 and 2, populate them with an identical line of text and set one to "use device fonts" and the other to "antialias for readability", then use this code to draw boxes around the first line of text in each of them:
import flash.text.TextField;import flash.text.TextLineMetrics;graphics.clear();drawBoxAroundLine( p1, 0 );drawBoxAroundLine( p2, 0 );function drawBoxAroundLine( tf:TextField, line_index:int ):void{ var gutter:Number = 2; var tlm:TextLineMetrics = tf.getLineMetrics( line_index ); graphics.lineStyle( 0, 0x0000ff ); graphics.drawRect( tf.x + gutter, tf.y + gutter, tlm.width, tlm.height );}
The box surrounding the line of text in the "use device fonts" box is way off at first. Scaling the player demonstrates that the text width of the device font field fluctuates wildly, while the "antialias for readability" field scales with the originally drawn rectangle perfectly. That much is fine, but again to clarify the problems I mentioned at the top of this post:
Since the text width fluctuates wildly upon player resize, assuming that getLineMetrics actually works on device fonts (and that's an assumption at this point), you'd have to detect the player resize and redraw the text. Unfortunately, Flash does not fire the player resize event unless the stage scale mode is set to NO_SCALE. That's problem #1. And if that's by design, then they should definitely add a SCALE event, because changes in player scale dramatically affect device font layout, which requires recalculation of text metrics. It's a real issue for fluid layouts.
The second problem is that even when handling the resize event, and for example setting the text field width's to match the Stage.stageWidth property, when the text line wraps, it's not updated until the next frame. In other words, at the exact resize event that causes a word to wrap, calling getLineMetrics in this handler reports the previous line length before the last word on the line wrapped. So it's delayed a frame. The only way to get the correct metrics immediately is basically to set the text property to itself like "p1.text = p1.text". That seems to force an update of the metrics. Otherwise, it's delayed, and useles. I wrote about this in an answer over a year ago, showing how sensitive the text field property order is: http://stackoverflow.com/a/9558597/88409

As I've noted several times, setting the text property to its own current value should not be necessary to update the metrics, and in some subclasses of text field, setting a property to its own value is ignored as the property is not actually changing and processing such a change would cause unnecessary work which could impact application performance. Metrics should be current upon calling getLineMetrics. They are not. That's the problem.
From a programming perspective, having to set the text property (really "htmlText" to preserve formatting) to itself to update metrics is almost unmanagable, and doesn't even make sense considering "htmlText" is just one of a dozen properties and methods on a TextField that could invalidate the layout metrics (alignment, setTextFormat, width, height, antiAliasMode, type, etc.), and I would have to override every one of those properties so that I could set htmlText = htmlText. Using such a subclass isn't even possible if I want to use the Flash IDE to add text fields to the stage. I would have to iterate over the display list and replace all existing fields with my subclass, which also isn't a good workaround because there's no way to update any and all variable references that may have been made to those instances.
Frome what I've read, the invalide+render event system is unreliable. My layout framework is similar to that of Windows Forms, and performs layout immediately, with dozens of docking modes and uses suspend and resume layout calls for efficiently resizing multiple child objects in a component. Certain calculations cannot be aggregated for a render event, because some containers are semi-reflexive, meaning they can expand to fit the child contents while also contraining the child size, depending on whether the contain was resized or the child component was resized, so as a matter of correctness the resizing calcultation must occur immediately when the child resizes, otherwise a top-down pass on the display hierarchy for resizing will not be sufficient.
As far as waiting until the next frame, no that is not possible, as it will cause one frame to be completely wrong. If I was dragging the browser window to resize it, it would look terrible as virtually every single frame during the resizing operation would be incorrect. Also, in the case where a user clicks the maximize or restore button of the web browser, the resizing event will occur exactly once, so if the metrics are not correct when that occurs, there is no recalculation occuring on the next frame, it will just be wrong and sit there looking wrong indefinitely.
In case it's not obvious by now, this is a web application. It uses the NO_SCALE stage scaling option, so notification of the event is not actually an issue for me personally. I was just pointing out that for anyone not using the NO_SCALE option, there is no event in Flash to detect player scale. What you're suggesting is using a JavaScript event and using the ExternalInterface bridge to send a message, which there is no guarantee whether it will be processed in a timely matter by the player and introduces possible platform inconsistancies, depending on whether the browser has actually resized the Flash interface at that point or what state Flash is in when it tries to recalculate the size of the text. The browser may send that event to flash before the player is actually resized, so it will be processing incorrect sizes and then resized after the fact. That's not a good solution. Flash needs a scale event in addition to a resize event. I'm really surprised it doesn't have one. At the very least, the existing resize event should be dispatched reguardless of the stage scale mode, rather than occuring exclusively in the NO_SCALE mode.
Bottom line is that getLineMetrics needs to return correct values every time it is called, without having to set the "text" property immediately before calling it. If such a requirement exists, which seems to be the case, then that needs documented in the getLineMetrics method.

Using Music Fonts

Similar Messages

Maybe you are looking for