Using my 30 inch Cinema display to watch my Comcast Cable?

Just a thought, my monitor is much larger than my tv. Is there such a way to hook my cinema display into my comcast cable/dvr box?
Thanks,
Christine

Call Gefen and see if they have that solution. If they don't, then I doubt one exists.
http://www.gefen.com

Similar Messages

I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up

I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

MBP3.1 can't run 30-inch cinema display

I used my 30-inch Cinema Display on a G5 for quite awhile, but had to switch to my MacBook Pro when key apps like FC Pro required an Intel Mac. Since running it on my MBP 2.2 (Model A1226, introduced in 2007)/4 GB Ram/upgraded to 500GB drive I've had on-going problems with screen flickering, freezes and automatic rebooting.
I've had Apple replace the graphic display and the mother board twice, and the problem continues. Apple claims that the MBP can drive the display, but it doesn't look as if they're right. My laptop has none of the problems when disconnected from the display.
Has anyone else had this problem?

You don't say what connection adaptor you are using. See this Apple support post to see if it applies to you. http://support.apple.com/kb/HT3571

Can i use Apple 2005 20-inche cinema display on Mac pro ?

can i use Apple 2005 20-inche cinema display on Mac pro ?

If the display has a DVI connector it will plug into the Mac Pro directly. If it uses ADC (Apple Display Connector)
<http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
you will need a DVI to ADC adapter
<http://www.amazon.com/Apple-M8661LL-Display-Adapter-4038234011420/dp/B00011KHT2>

What happened to the 30 inch Cinema display?

What happened to the 30 inch Cinema display?
I went into the Apple store to purchase one, all they had was the (too small) 27 inch with the ugly black border.
I did find a few used 30 inch Cinema displays on ebay, they are over $1100 USED.
Any suggestions, for a 30 inch display?

No suggestions, apart from changing to a non-Apple display such as a LaCie one.
I think Apple really makes a mistake with the new displays - they are nifty, granted, if you want to watch TV or the like, but they'll loose the professionals, working all day long with their displays.
1. the new displays have an excellent resolution, no trouble there, but they are like mirrors, reflecting lamps, etc. and very tiring for the eyes. That's already a problem with my MacBook Pro but I've got to accept it - what else is there to do - and fortunately it's only my secondary system.
2. we have gotten used to 30" and do not want to downgrade.
I am a translator and need to work with technical plants and several open files, so 30" really helped facilitate work. And now that's all gone as the 27" display definitely is not up to scratch for day-long work...
I ordered a 30" display right when it became available, so it's quite old now. I worry what I'll do when it breaks down ...
Suzanne

Black band on my 30 inch cinema display. Any known causes?

Hey everyone,
My 30 inch cinema display is doing some wierd things which I havent encountered before.
If you can see the image, towards the LEFT SIDE CENTRE, there are these BLACK BANDS.
these start to appear after about 5-15 mins after the display is turned on. although they dont show up on bright backgrounds.
If I let to monitor cool down for 10 mins and start it up again they are gone and they start appearing again in about a min or two,
Has anyone seen any such issues before or is this a known issue with the 30 inch.
Any ideas on what I should do about this.
I will be taking it to Apple for sure as its still under warranty but would like to know
what is causing this and whats apples take on it.
Cheers,
Ani

I bought a 30inch as well a couple of months ago but have very little use except for watching movies. But when I use grey colour as the background the banding mark became very noticeable. It seems to be some kind of design issue i suppose and I dont know how Apple is going to address this. It's not a cheap monitor after all and i am very disappointed with this.

Random screen blackout 2009 24 inch Cinema Display... HELP.

Random screen blackouts with 24 inch Cinema Display (purchased 2009). Never used with anything but same Macbook Pro (2009). No hardware changes on MBP. Just started June 6, 2012. Super annoying. Anyone else having this issue? Recommendations?

Hello, Ertjie.
The link titled Download the 24-inch LED Cinema Display Update from the kb/TS4045 article worked for me when I tried it today. Click the "Download" link I post here or try the one in the kb article again. Perhaps it will work for you now?
However, I note that the kb article expressly states that this firmware update:
...is only intended for use with and will only install on the Apple 24-inch LED Cinema Display while the display is connected to a Thunderbolt-enabled Mac. (EZ Jim emphasis added)
If your Mac is really using Mac OS X (10.6.8) as shown in your initial topic posting, your Mac may not be Thunderbolt-enabled. If so, contact Apple or your Apple-Authorized Service Provider for help.
Message was edited by: EZ Jim
Mac OSX 10.8.3

My 30-inch cinema display often doesn't come on at startup and I have to disconnect it and reconnect to work.

I have a 30-inch cinema display connected to a Mac Mini. When I first boot up the computer after having it shut down for a couple of days, the display screen does not illuminate about half the time. If I disconnect the display from the power brick and then reconnect it usually comes on, although sometimes I have to do that more than once. It works fine once it on and displaying. Anyone else seeing this?
Rocketman

Hi Rocky Rakoon,
Thank you for your post, and welcome to the Apple Support Communities.
I understand that your Apple Cinema Display is not turning on upon startup. I'd like to reset the following, as it may resolve your issue:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
You may also want to reset your computer's PRAM:
OS X Mountain Lion: Reset your computer’s PRAM
http://support.apple.com/kb/PH11243
Note: Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
For more troubleshooting directly related to the Cinema Display, see this resource:
Apple Cinema Display: Troubleshooting steps
http://support.apple.com/kb/HT2810
Thanks,
Matt M.

MacBook Pro W/30-inch Cinema Display

Is there a working solution for this yet? is it possible to use the 30 inch or even a 23 inch?
If so how?

Let me better word the question.
Can Windows XP Support the 30 inch cinema display at full resolution like in can in leopard via boot camp? Or a 23 Inch?
Thanks

Older 20-inch Cinema Display powering on and off repeatedly

I recently inherited an older (clear) 20-inch Cinema Display that I'm trying to use with my G5 dual 2.3 running 10.4.8. After purchasing the expensive DVI to ADC adapter and hooking it up, everything worked fine for about maybe 20 minutes or so until the display started to cycle on and off every two or three seconds (off for a couple seconds, then on for a couple seconds, repeat endlessly). This is accompanied by the power button glowing on and then off so it seems as if the power is cycling on and off by itself.
Any ideas? At first I suspected the ADC/DVI adapter which got really hot when in use, but letting it cool down had no effect on the monitor's behavior. My clunky old 19" CRT display works with no problems, so it's not the video card. The Cinema Display is my old monitor from work, and never had any performance issues, although it's been in storage for almost a year.
PowerMac G5 Dual 2.3 GHz Mac OS X (10.4.8)

Same thing is happening to me. I have the 20" Cinema Display (clear with ADC).
Last night I was in another room and all of a sudden I heard my G4 (Digital Audio) restart. I thought I was hearing things. Then about 3 minutes later I heard it again. I thought my daughter was up working on the computer or something. So I went up and there was no one around, but the computer kept restarting every 1 or two minutes. It was very strange – sometimes it it would go to sleep in the middle of the boot process.
I was able to stop this process eventually by disabling the display power button in the Energy Saver and Displays prefs panels. But I would like this feature to be functional since it makes my setup easier to use for my kids.

Help I need a "power brick" for my 30-inch cinema display!!!!!

I recently moved and lost my "power suppy brick" for my 30-inch cinema display..How do I get another one?? The Applestore wanted my old one to do a even exchange?? But I can't do that...And they don't sell the product as a replacement. I'm stuck with a 2 month old display I can't even use! Any ideas???
Sony Vaio Windows XP

If the display is covered by AppleCare call 1(800)275-2273 and ask for a replacement power adapter. They will send the new unit first, and you are supposed to return the bad unit. You give them a credit card number when you order the part, so they can charge you, if for some reason they don't receive the old part.

Adding 30-inch Cinema display to a new iMac. Not getting full resolution.

I have just bought a new 27-inch quad core imac i5 and have added my old 30-inch cinema display (five years old) as a second monitor but the resolution is poor - 1280 x 800 compared to 2560 x 1440. How do I improve the resolution as it's almost not worth having?

You need to use a dual-link DVI adaptor to get a higher resolution from that display.
(53141)

30-inch cinema display: a thousand points of light

I've been using my refurbished 30-inch cinema display for a month now with a new Nvidia Geforce 6800 Ultra DDL card. Moments ago I found my display was "enhanced" by thousands of teeny tiny points of yellowish greenish light. I changed the desktop image and it doesn't matter what it is. They're still there, though they change location with each image. Any clues?

No, the cable is slack. I restarted my computer and the monitor came back just fine, so now it's a nonissue. It's always something, though . . .

Best performance dual 30 inch cinema displays dual x1900 card(s) ?

I am trying to get the maximum performance out of my system. I have a Mac Pro with two 30 inch cinema displays. I have them both connected to one X1900 card.
I use LightRoom as my photo work flow manager. I spread the library across both monitors as I sort thru photos.
Performance is good but sorting thru several thousand RAW files I need every bit of speed I can get.
Would I get better performance if I used two x1900 cards, one for each monitor? how about the 7300 or the FX4500? would those improve speed or better just for gaming?
thanks in advance for any help.

Two Quad-core with 8-16GB RAM, and your media fles on RAID.
I'd configure with 4 x 750GB WD RE2s. Can't easily swap or upgrade cpu so that is a given until you know and Apple has something that would make sense to buy/swap to newer faster systems (maybe in a year or next summer).
There is no support for two 16x lane slots. Maybe in the future but not now.
I doubt your performance is limited or factor of the twin 30s on the Radeon. It might. Try running with just one monitor for a few hours.

27 inch and 24 inch cinema displays dual setup on a Dell desktop PC

What Video Graphics card with two displayport outputs will work in a Dell desktop PC with Windows 7 and allow a dual monitor setup using a 24 inch and a 27 inch Cinema Display?

Depends on your Dell, power budget, etc

Using my 30 inch Cinema display to watch my Comcast Cable?

Similar Messages

Maybe you are looking for