Using my airport extreme with another wireless device to hook up direct tv

can i use my airport extreme and access my wireless router, so that i can hook up my directv box?

Is your intent to provide Internet access to the DirectTV box via an Ethernet connection between the box and the AirPort Extreme Base Station? If so, it the other wireless router another AirPort or Time Capsule? If not, then this would not be possible unless you will be connecting the Extreme to the other router by Ethernet.

Similar Messages

Using an Airport Extreme with a wireless router

I use to have an original Airport Base station connected to a D-Link DSL504 ADSL Wired Router. All worked well.
Then my basestation died so I upgraded my router to a Netgear DG834GT [108mps] ADSL wireless router. With this router I have never been able to get a full strength signal - even when the router is in the next room and my mac has been no more than twenty ft away.
I am about to move house and where the router will be plugged in will be a floor below one of my computers so I am thinking my signal will not reach my mac [I will test it once I've moved before I rush out and buy anything.] I can turn my wireless signal off of my Netgear so I was wondering if I am able to plug in a new Airport Extreme and use that for the wireless signal? I will plug the computer near my router directly in and then from the router plug in the Airport Extreme.
Does this seem a logical way or can a 'signal enhancer' from Netgear that would do the same thing? I think the usb port for my printer would be of some use for my laser printer.
Thanks.
Mark

Yes, that will work. Just put the AirPort Extreme in 'Bridge Mode" and it will become a wireless node for your wired network.

Can I use my Airport Extreme as a wireless bridge?

Can I use my Airport Extreme as a wireless bridge?

When you say "wireless bridge", I assume that you want the AirPort Extreme to receive a wireless signal and provide an Ethernet output, correct?
If you have another Apple router providing your "main" wireless network, the AirPort Extreme could possibly be configured to "Extend a wireless network".
In that setting, the Extreme provides more wireless coverage and Ethernet ports are enabled, so you could connect an Ethernet device that way.
But, the AirPort Extreme cannot do this with a product from another manufacturer.
So, in order to answer your question specifically, can you provide the make and model number of your "main" router?

Can I use the airport extreme with my Mac OS X?

Can I use the Airport Extreme with a Mac OS X 10.5?

Yes. In addition to administer the latest version of the AirPorts, you would need AirPort Utility 5.5.3, which requires OS X 10.5.7 or later.

Can I use the AirPort Extreme as a wireless extender to my Time Capsule ?

Can I use AirPort Extreme as a wireless extender ? I own a Time Capsule and want to extend my wireless network using the AirPort Extreme just because both have wifi AC. Also, does the AirPort Extreme need to be hook up via Ethernet if I extend

The problem with extending using a wireless connection between the Time Capsule and AirPort Extreme is this.......
The extender can only "extend" the speed of signal that it receives. The signal starts to lose speed as soon as it leaves the Time Capsule, and the signal will lose quite a bit of speed as it passes through the ceiling due to the thick construction. The ceiling presents what is known as "interference" to the wireless signal.
So, the signal has slowed somewhat by the time that it reaches an AirPort Extreme that would be installed on the main floor. That AirPort Extreme acting as an extender can make the signal that it receives go further, but it cannot make it go faster. A better term than "extender" really might be "repeater".
If you install an AirPort Extreme on the main floor, the signal upstairs will be stronger than it is now, and depending on how many obstructions there are between the AirPort Extreme and the upstairs area, the signal may be noticeably faster upstairs than it is now as well.
With wireless connections between devices, there are always so many compromises and variables involved that it is just not possible to predict what the actual performance might be in your home until you try things out in your home. For that reason, it is always a good idea to understand the store's return policy in advance in case a new item does not deliver the performance that you are hoping to achieve.
Now, let's say that you are able to pull an Ethernet cable from the Time Capsule to the main floor, and the AirPort Extreme is connected there in a nice, central location. Then, you could expect to receive about the same performance on the main floor that you receive in the basement, since the AirPort Extreme is receiving a full speed signal over the Ethernet cable from the Time Capsule. You can run an Ethernet cable about 330 feet, or about 100 meters with virtually no signal loss.
The performance upstairs will improve as well, since the AirPort Extreme has a full speed signal to broadcast....not the slower speed signal that would receive from the Time Capsule if it connects using wireless.
If you want to achieve the same type of performance upstairs that you have in the basement and main floor, then you will need to pull an additional Ethernet cable up to the upstairs floor and add another AirPort there.
That would probably be the "best" wireless network system that you could install if you are looking at all the options. Few of us are lucky enough to be able to install the "best" network, but those that are receive remarkable wireless performance in return for their investment.

How do I use my airport extreme with my FIOS router?

How do I use my AirPort Extreme base station with my FIOS Router to extend my network? I have hard disks connected to my AirPort Extreme and would lik to access them.

Probably can't answer all your questions - but.... I use a Linksys (wired and wireless) router as my primary entry point for FIOS. I use a Time Capsule and an Airport Express as a common wireless connection. So I have two visibile wireless networks and use them both depending on where I am in the house. Both the TC and AEx can be seen either wirelessly or wired from the entire network. Note - the Linksys provides all the DHCP - you set the apple routers as "bridge mode."

Can i extend the range of an airport extreme with another airport extreme and use the ports on the airport extreme i used to extend the network?

That seems like a complicated question.
I have a Time Capsule (which the HD *****, but that is matter for another discussion) and want to extend the range with an Airport Extreme because I have 2 devices in one room that do not do wireless but have Ethernet ports.
The room has iffy WiFy connectivity too.
I want to know if the 3 ports on the Airport Extreme still work after configuring it as an extender rather than a router.

The thing is that I want to know if I can put the Airport Extreme at the edge of the room where the existing Base does not reach.
This will not work.
Remember, an "extending" AirPort can only extend the quality of wireless signal that it receives. For that reason, it must be located where it can receive a strong wireless signal in order to work effectively.
For example, let's say that your "main" router was on one end of the house and you want to extend the signal to reach the other end of the house. In this case, you would locate the "extending" AirPort about half way between the main router and the other side of the house.

Using latest Airport Extreme with older iMac and 10.4.11

Airport Extreme Utility does not recognize the base station, unable to complete set up, please advise.
Not looking for the older iMac to have a wireless connection--have Ethernet cable running from Airport Extreme to iMac.
(Another Ethernet cable runs from Cable Modem to Airport Extreme.)
Looking to have a wireless network for WiFi enabled devices.

Not the first time I've seen this type of scary issue with Tiger. The OS is so old, looks like we are going to have issues setting up the extreme. We could find a work around... by using either an iOS device, or even a PC. What else do you have there that's handy?

Using an Airport Extreme with my AirPort Express as a new network?

Hello.
I am looking into buying an airport extreme as a replacement for a Netgear router that does not seem to work. I have an Aiport express already.
So let me see if I can get this straight...
I can have 6 computers (all PCs) connected (and a couple other devices like a TIVO) all connected to an airport extreme base station to the internet and 1 airport express set as a remote base station. All devices will be able to connect to the internet (3 computers plugged in via Ethernet on Airpot Extreme) and share printers/files/etc? Is there a limit to the number of computers that I can have (even if i am extending with an Airport Express?
I would appreciate any help steering me in the right direction.
Dell Laptop Windows XP

Andrew,
Yes you can do all those things.
There is a limit on the total number of connections but it is very large.
The Airport Express can be used in a number of ways.
...For music only - which is not a problem.
...Or as a wireless relay - using something called WDS. In this mode you can connect further computers to the ethernet port of the Airport Express. Or extend the wireless reach of the network.
If your ONLY use for the Express is to connect a computer, its probably better to get a wireless card for it.

Trying to connect to Airport Extreme with Dell Wireless 1370 and Windows XP

Home network using Airport Extreme Base Station with WPA-PSK (TKIP) Security. All works well with MACs in the house (G5, iMac, and Powerbook). Trying to connect a Dell Latitude D610 with built-in Dell Wireless 1370 WLAN mini-PCI Card to the home network.
Initially home network is not seen on Dell Laptop in available networks (as expected as it has not been added to list of available networks and is a "closed" network)although I do see the neighbors network so card is working and sees "open" networks.
Set-up options for the Dell 1370 card include:
Network Name (SSID)
Network Authentication (Includes "open", "shared", "802.1X", "WPA", "WPA-PSK", and "CCKM")
Data Encryption (When WPA-PSK is selected it defaults to Auto)
Network Key
Confirm Key
All other configuration items are greyed out.
I enter my SSID, select WPA-PSK, Data Encryption defaults to auto, tried entering passwrod in Network Key and Confirm Key which does not seem to work. Adds to list of preferred networks but does not indicate availability.
Question is I have a password that I use on MACs for access to WPA-PSK network. On the Dell there is no spot for a password and it does not seem to work in the Network Key or Confirm Key boxes.
Any assistance would be appreciated.
Thanks
mark
Airport Extreme Base Station Windows XP Dell Wireless 1370 WLAN Mini-PCI card

Initially home network is not seen on Dell Laptop in
available networks (as expected as it has not been
added to list of available networks and is a "closed"
network)
Open (broadcast your SSID) your network and see if that makes a difference.
Often (especially in crowded airwaves) a closed network can cause connection issues for some adapters.
iFelix

Can I use the airport extreme with a random router?

Can I add an AirPort extreme to an existing network and have a laptop play iTunes music to a stereo? I'd like to not drop 200 bucks on a new router. Thanks for any help!

I don't agree. I have a 2wire router for my Qwest DSL and I cannot get Airport Express to work properly. I cannot use any encryption, so I am taking the AE back tomorrow. I posted a question here, but no one answered it, and I've been chastized for bumping posts in the past.
I'm very disappointed with my experience, and the lack of information on the packaging for the AE.

Can i use my Airport Express with another Airport express w/o base station

I was wondering if i could use one airport for my main internet and the other one for useing my ps2 online (hooking up a cable to go from the ps2 to the airport) Would the 2nd airport express pick up the others internet?

Yes you can using WDS.
Configure the first base station I presume as a
wireless access point connected to your main router
by cable.
Configure the second to extend the network of the
first.
iFelix
Felix - what are the steps to set up two airport expreses to work together to extend range?
thanks
john

Using the TC with another wireless device - non-ethernet

So I have an odd situation, and I'm hoping someone much smarter than myself can lend a hand.
I live in Japan, and my internet is a little unusual. My router now is a cell-style box with no plugs beyond the power supply. It's through a company called eMobile, whom are nortorious for being the kind of company you don't want to work with. Anyhow, this is where I get my internet signal from.
I've bought a new MBP and a Time Capsule to go with it. I am currently expecting to use the Capsule as a wireless backup, and no a router. It strikes me that this will become a pain of having to switch between wireless signals for internet and backups. I was hoping I could link the existing signal, from my eMobile router thing, throug my new TC, and use the Capsule to push out the signal from the other guy. Reading around the web sounds like that's probably not going to work, but I want to check with the experts before I abandon hope.
Speed is not a concern for me. I don't do a lot of streaming or things of that sort, and this network has a bit of a choke problem anyhow. I just want to be able to access the internet through my Time Capsule, but have that pull the actual signal from my no-ethernet-port-having router. I'm happy to give more info about the eMobile box if it'll help, but I don't know what to look for as of now.
Thanks to anyone who looks, and happy New Year.

Unfortunately your investigation is correct.
The TC does not work in the way you would like it to.
You can join it to the wireless network of the emobile. no-ethernet-port-having router
It will be available via the network but at half the speed.. because of double hop wireless and totally reduced to a mere client.
See instructions here.
Join a wireless network.. in v6 utility.
https://discussions.apple.com/thread/5719954?tstart=0
The alternative is to use ethernet.. even if your new MBP is also no-ethernet-port-having computer
Apple sell a thunderbolt to ethernet adapter.
You can run ethernet and wireless simultaneously without having the TC connected to the internet.
See https://discussions.apple.com/thread/4817218?tstart=30
You can also buy a cheap USB wireless stick and plug that into the laptop.. obviously you need to buy a mac compatible one.. and then use the stick for the internet.. and use the internal wireless for link to the TC.. or that is how I would recommend as the speed is going to be needed in local network and will not be much on the internet emobile box.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

How Do I Connect An Airport Extreme With Password to another Wireless Devic

We have a setup for two different wireless devices so that there are multiple locations that can get online, but the entire setup has no passwords assigned. We would like to assign passwords to both wireless devices so that only the appropriate people are getting online. How does one do this?
The first wireless device that connects directly to the modem from the phone company is a brand new Apple Airport Extreme. The computer that set up the device so that people can get a signal was from a PC that is directly connected to the Airport Extreme via an ethernet cable. Also connected to the Airport Extreme is an ethernet cable that goes (50-100ft) to another wireless device - by Netgear - which then sends out another signal to pick up wireless internet, which is the signal/network that I work from.
If we assign a password to the Airport Extreme, I'm guessing it will complete screw up the connection to the Netgear. How would that be dealt with? And, how could we then, if we wanted, set up a password for the Netgear as well. I've read some initial information on the user guide CD and online, but I don't know the terminology of whether these are networks or just wireless devices 'bridged' together, etc.
My biggest concern, is it works right now, but the owner of the devices wants to put passwords on it and I want to make sure we can keep it working even with passwords. Does anyone know how to easily set up passwords and can I do it from my computer even though they were initially set up by a PC? Or do I have to do it from the PC and if so, how, because I am completely a Mac person and am very unfamiliar with Windows. Thanks.

Question that I need to know now is how do we set up a password on the Apple Airport Extreme now, when it is already set up and working without one?
Open AirPort Utility.
Select your base station, and then choose Manual Setup from the Base Station menu. Enter the base station password if necessary.
Click AirPort in the toolbar, and then click Wireless.
Choose a password scheme from the Wireless Security pop-up menu.
Enter the password all users will need in order to join this wireless network.
AirPort Utility 5.1 Help: Password-protecting your wireless network
Also, are there different types of passwords and if so, what is the most reliable one so that we don't lose connections, time out or have any other quirks?
There are different types of wireless encryption. WPA2 and WPA are the most secure especially when used with a non-dictionary password. 128 bit WEP is passable in most situations but not very strong. 40/64 bit WEP is extremely weak.
There is really no general "reliability" issue with any of them. Some devices aren't compatible with some of them.
If when we assign a password to the Apple Airport Extreme and for some reason the Netgear stops working, how do we unassign/take away the password on the Airport to get it back to the current setup that we know does work?
Follow the procedure above but disable wireless encryption instead of enabling it.

Using my airport extreme with another wireless device to hook up direct tv

Similar Messages

Maybe you are looking for