Using my combination to "unlock" the volume setting is being rejected
I wrote down my combination, (unless I mis-entered), I have tried the following ways to enter the combination:
click to each number, advance to the next, etc, then press the middle bottom- rejected
click to each number, hit middle button, then advance to next number, repeat, finish with middle button- rejected
Is Restore my last option?
Hello dajhnsn,
It sounds like you are using the correct motions to unlock your iPod, so at this point, yes, your only option is to restore your iPod via iTunes. Keep in mind that restoring your iPod will delete all the music and files from your iPod and set it back to its original default settings.
[Restoring iPod to factory settings|http://support.apple.com/kb/HT1339]
Hope this helps.
B-rock
Similar Messages
-
I cannot make these directions work
I downloaded media on Overdrive MEdia on my PC
I have the overdrive media ap on my I pod touch 4g
this media is suppossed to be compatible w/I pd touch
Notes on Transferring OverDrive MP3 Audiobooks…
Most MP3 capable devices should play OverDrive MP3 Audiobooks.
If you intend to transfer OverDrive MP3 Audiobooks to an Apple® device, note the following…
iTunes® v9.0.2 (or newer) is required.
The Apple device must be formatted for use with Microsoft® Windows®.
The iTunes setting 'Manually manage music…' must be enabled for the device before you can complete the transfer. Adjust this setting in iTunes as follows…
Connect the iPod® to your computer.
If it does not launch automatically, open iTunes v9.0.2 (or newer).
In iTunes, locate the device in the left vertical navigation panel (under heading 'DEVICES'), and click the device.
The 'Summary' screen is displayed.
Place a checkmark next to 'Manually manage music…'.
Click the 'Apply' button.
The iTunes 'Summary' screen refreshes, and the changes are saved.
If desired, close iTunes.
Note that if an Apple device is connected to your computer, you can choose to simultaneously transfer a title to the iTunes Library and the Apple device. If you wish to only transfer a title to the iTunes Library, you must first disconnect the Apple deviceRecovering your iTunes library from your iPod or iOS device: Apple Support Communities
Also you said " I want to add them to my iCloud, and also back to my computer. " Note that unless subscribe to iTunes match, only iTunes purchases are stored in iCloud.
Also,
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
The volume icon on my ipod won't disappear and the volume sets itself at full.
The volume icon on my ipod touch won't disappear and the volume sets itself at full. I have tried a master reset etc, but it doesn't want to cooperate. Any ideas?
Try:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod
If you still have a problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
I do not know what a "master reset" is. -
How to unlock the volume control
how do you unlock the volume control if you do not have a code to enter?
Restore it in iTunes
-
I have read through a lot of information on disk usage, storage rules for an editing rig, users inquiries/member responses in this forum and I thank each and every one of you – especially Harm.
In building my new workstation, I purchased five (5) WD 1T, 7k, 64M SATAIII hard drives and an Areca RAID card, ARC-1880ix-16-4G, which I plan to use primarily as my media/data disk array. The workstation will use a 128GB SATAIII SSD as the OS/program drive and I will transfer two (2) WD Raptor/10k SATA 70GB drives from my current system for pagefile/scratch/render use. I tentatively plan on using a mobo SATAIII port for the SSD and mobo SATA ports with a software RAID (level 0) for the 10k Raptors.
In reading the Areca Instruction manual, I am now considering exactly how I should configure the 5 physical 1TB drives in terms of RAID Level(s), Volume Sets, and RAID Sets. I must admit that I like the opportunity of allowing for a Dedicated Hot Spare as I am generally distrustful of the MTBF data that drive vendors tout and have the bad experience in the past of losing data from a mal-configured RAID array and a single drive hardware failure (admittedly, my fault!).
In line with the logic that one doesn’t want to perform disk reading while trying to write at the same time (or vice-versa), I am thinking the approach above should work OK in using the mobo disk interface and both software and external hardware RAID controllers without having to create separate RAID level configurations within a Volume Set or further dividing up the physical drives into separate RAID sets. I know in forum messages that Harm noted that he had 17 drives and I could envision a benefit to having separate RAID sets in that situation, but I am not at that point yet.
To some degree I think it might be best to just create one RAID Level on one Volume Set on one RAID Set, but want to solicit thoughts from veteran controller users on their workflows/thoughts in these regards.
Anyone care to share thoughts/perspectives? Thanks
BillThanks for the speedy feedback Harm - I appreciate it.
I was thinking RAID level 3 as well.
Of course, it's always something! I purchased the Caviar Blacks by mistake - which are non-TLER. I will work with EggHead to return the ones I purchased and replace them with RE4 versions as I'm not thrilled about the possibility of the controller declaring the volume/disks degraded unnecessarily and although I have the DOS utility WDTLER where one is supposed to be able to enable/disable TLER on WD drives - I suspect WD is way beyond that now anyway with current builds.
I agree with you about just testing the performance of the options for the raptors - on the mobo and then on the controller. When I benchmark them I'll post the results in case others are curious.
Thanks again....off to EggHead! -
Can you use applescript to access the volume setting "input level" in system preferences?
I want to make a script that adjusts the output volume of my mac based on the volume that the mic hears. I am not very good with applescript, but I do know how to control the volume. I was wondering if there was a command that retrieved the input level from the mic as it is show in the sound preferences in the system preferences window. Any help would be greatly appreciated.
ThanksDoes the following script do what you are asking for?
get volume settings
set theInput to input volume of result
set volume output volume theInput -
The volume on my facetime goes out very frequently. I can hear the person just fine, but they can not hear me. I have checked my app store to see if there have been any updates to the version of facetime that I bought in May 2011 and it's not. Is there anything that I can do to fix this problem?
By the way it is not my speakers. I have used Google+ and Skype, and they both work just fine and the volume does not go out.Thanks, it seems that it doesn't like to play games, which is a bit of a bummer as i bought this specifically because it was capable of doing that. To be fair, it is capable... I just need to get used to a sound like sitting by a washing machine on spin cycle... Wish they would make people aware of this in the Apple Store, its very misleading and not at all desireable.
-
How to unlock the Form Setting Window?
Dear all,
I have one query.I want to lock/disable the form setting window for normal user .
If he will not permitted to make changes to that form setting window.Hello Manohar,
As Sridharan has replied, document settings authorization is what controls access to Form Settings when you are on a particular form.
If you want to restric access to form setting when no forms are OPEN and when the user only has the Main Menu...then you need to use Additional Authorizations..
PLease read this thread How to set Authorization on Form Settings
Suda -
I lost my iPhone 4 in Brussels last week. It was in airplane mode when lost. I also had a code to unlock the phone. The phone was off when lost. My question is: Can a person access my personal data on the phone? Can they take the chip out and place it into another iPhone and access the personal info on the chip or is the personal data on the phone itself and could they put a new chip in and access the data?
I have Find my iPhone App, but it says that it is offine.
I've checked all week and it is offline.
I clicked on erase iphone when phone accesses the internet on the Find my iPhone App.
I just want to know how safe is my personal information that I have on that iPhone? -
My MacBook Pro has no sound, but the volume setting works
My 15' MacBook Pro 2012's sound is not working. You can still change the volume by pressing F10 to F12, but not actual sound comes out. The headphone jack is not red (although I have experienced that problem before and fixed it). Whether the headphones are plugged in or if they aren't, there is still no sound. I am running on OS X 10.7.5 with a 2.6 GHz Intel Core i7 Processor, 8GB 1600 MHz DDR3 Memory and the storage capacity is 749.3 GB total.
Have you tried a PRAM reset?
http://support.apple.com/kb/ht1379
Ciao. -
How to create a disconnected license using User-based license in the Volume License Manager
Using VLM 2.0, how do you create a disconnected license for users who are set up for User-based license?
Hi Jordan:
Please see the following knowledge base entries that should help you out.
http://digital.ni.com/public.nsf/websearch/7AE8E22CB83D604286257088006D452A?OpenDocument
http://digital.ni.com/public.nsf/websearch/28CACF3A4F81FB5C86256F5D0081D046?OpenDocument
http://digital.ni.com/public.nsf/websearch/B12A9ED8FC06A9B286256E6A00671018?OpenDocument
Thanks
Nandini
NI -
I tried to use about:config, but I was asked for a password. I don't remember entering a password and have never used the master password function. Where has this come from, and how can I change the password or get rid of the need for a password?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
Using iDVD 3, what is the best set up for faster encoding?
Hi all. I just upgraded my G4 to 1Ghz and 1.25g ram. Got a new SuperDrive and wanting to crack out some DVDs. I noticed that the encoding process is the slowest ever. What (if anything other than buying a new mac) can I do to increase encoding process? Or can it be sped up. I did use MacSweeper on my HD and made sure that it has at least 20G available.
Thanks for your help.
LeoFINALLY! I found out what was wrong with my system. I needed to download the Patchburn to get my system to recognize the DVD burner. I think I actually saw this somewhere, but the good folks at Other World Computing mentioned this to me. Anyway, let the burning begin! Thanks for your help.
Leo -
I need some help trying to get connected from a remote location with my Powerbook. I am a graphic designer on vacation and need to keep in touch with my clients. Need help ASAP!
Looks like you are working with a vintage product and the operating system is a little outdated, which makes it harder to troubleshoot. It's possible that it doesn't support WPA (depending on the Airport card built-in). Otherwise, if you can connect via ethernet, check for software updates. It even might be as simple as restarting the computer.
-
ITunes gift cards - how do you use them in the volume license store?
I am the IT admin at a K12 institution. I have two major issues.
First, I used my personal email address as the administrative user for the volume licensing program. Even though that account is used as an ADMINISTRATOR for the volume licensing program, I can't sign into the volume license store with it, because it's associated with the iTunes store. So I have a secondary email address. I tried adding that as a facilitator, but that can't be used because "it's associated with the iTunes store". I don't remember creating an account with that address, and I'm certain I've never used it to purchase anything. I can't delete it because Apple doesn't provide a way to do that.
Down to the 1st question: Is there any way to reassociate one of my two exisiting accounts as a volume license facilitator?
Second, I have a pile of iTunes gift cards that are supposed to be used for volume license purchases. When I tried to redeem the codes, it rejected them asking to have them entered in the iTunes store, which completely defeats the purpose of trying to buy volume licenses. Why would it reject money if it's on one piece of plastic instead of another?
Setting up these iPads has been a nightmare. Any help would be appreciated.You need to call Apple at 800.MY.APPLE when the computerized voice asks why you are calling say Enterprise, that will get you to the Education / Enterprise division of Apple and they will be able to help you sort this out.
Maybe you are looking for
-
Warning Query was cahnged ! Characteristic no longer exist' in workbook
Hi all I am getting one warning ' Query was cahnged ! Characteristic no longer exist' while opening the work book I have though cahnaged the query but every time I am getting this warning. Is there any way out to get ridof this warning message Thanks
-
Printing wirelessly with MacBook Pro?
I'm sure this topic has come up before. Does anyone have any ideas how I can print wirelessly using my MacBook Pro? I'm trying to get Airport Express working but the 2 printers that I have are not on the list of compatible printers so I think that I
-
Just bought an Apple TV - how to play to my various remote speakers?
I must be missing something. This thing does everything but I see no way to get it to play to my remote speakers I have throughout the house (I have 4 base stations w/speakers in every room). This seems like a no brainer from a design perspective giv
-
Desktop Office Integration and Email
Dear Colleagues: I have developed a Desktop Office Integration application that retrieves WORD documents from a BDS Content Server, customizes the document with BP data, emails the document to the BP as an attachment, and associates the document with
-
Title explains. Also, I tried disconnecting it and then reconnecting it, but no luck. I am writing to you on my iPod touch(5th gen ) so as you can see it has Internet access.