Using my ipod with multiple computers: not the usual problem I think

I've searched the forum and various help documents but I couldn't find the answer to this.
I have a laptop at the office (work-related, so I don't have any of my music on it, just itunes) and my computer at home. Ideally I'd like to:
= keep my ipod automatically synced to my home computer
= be able to connect my ipod to my work laptop and play the music stored on it through itunes there, and also keep it charged and ready for the trip home.
It seems that the 'manually manage music and videos' setting travels with the ipod, rather than being stored on the computer's itunes installation. If I set it at work, so I can play music there, when I connect the ipod at home I have to reset it (and a few times when I did so the ipod started deleting everything because 'sync my music' was not checked, grrr).
I just want to set things up in a way so that when I connect my ipod at work it will let me play whatever songs I have there (without wanting to sync anything), and when I connect it at home it will automatically update it. It's simple enough, but I can't seem to figure out how to do it.
If I connect the ipod at work and press 'cancel' when the 'do you want to erase things' pops up, it doesn't try to change the settings, but at the same time it doesn't let me play music at all, everything is greyed out
does anybody have any idea? I don't want to resort to have to buy a usb power adapter just so that I can play my ipod at work without draining the battery...

B_Ram wrote:
Could it be because its an iPhone and not a true iPod???
i doubt it.
actually, syncing an iPod Touch (or iPhone) with multiple computers is not recommended @ all. click here to find out what Apple has to say about it.
all i can think of, i you really must do that, is this:
to prevent a sync when plugging in the iPod - hold down the option and the command ( on a PC that would be the shift and ctrl ) keys when plugging in the ipod - keep pressing the keys until the iPod is listed under the devices list in iTunes. now you should be able to do what you want.
however, you do so @ your own peril, as the article above outlined.
alternatively, consider a setup such as this.
good luck !
JGG

Similar Messages

  • I want to use my ipod with multiple computers

    I use 3 computers for my music (office, home and laptop).  I want to put music on my ipod from all 3 computers.  I have an Ipod Classic - 160gb

    Hey 707dancinann,
    Thanks for the question. To achieve this, you’ll want to manually manage the content on your device:
    Managing content manually on iPhone, iPad, and iPod
    http://support.apple.com/kb/HT1535
    When manually managing content, you can add content from multiple libraries to your iPod or iPad. Even when manually managing music, some content may be available from only one library at time.
    Thanks,
    Matt M.

  • Can I sync my ipod with multiple computers using home share?

    Once I homeshare all my computers, can I sync my ipod with any of them?  Or do I always have to sync using the same computer.

    What kind of iPod do you have?
    For most iPods you can click Manually manage music on the summary page in iTunes. Check out Apple's document -> Using iPad or iPod with multiple computers.
    WTH.

  • Using an iPod with multiple Macs

    Hi all!
    I have a 30GB iPod with color display. I've been using it with my Power Mac G4. That's where I keep all of my music and photos.
    However, I just got a Pismo PowerBook, and I would like to use my iPod to play music through it while I'm at school, rather than copy my gigs of music onto the PowerBook.
    I used to have the iPod set to automatically update everything, but in order to listen to music on my PowerBook, I had to set it to manually manage.
    Does this mean that I have to manually sync everything, or manually copy music to the playlists on the iPod?
    Thanks,
    Alex

    Hi Alexander,
    Does this mean that I have to manually sync everything,...
    If the songs/photo differ on the two computers, the primary computer, where you have your songs stored in this case your G4, you can keep automatic. However, on your PowerBook, just keep it manual.
    You may also want to take a look at this article:
    Using iPod with multiple computers
    Gary

  • Can bookmarks be protable for multiple computers? Is it an option to log on and use my bookmarks with multiple computers and locations? Thanks

    Can bookmarks be protable for multiple computers? Is it an option to log on and use my bookmarks with multiple computers and locations? Thanks

    Profile is a folder which store all your personal data in a safe place
    * https://support.mozilla.com/en-US/kb/Profiles
    You can use this button to go to the current Firefox profile folder:
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    here explain how to backup profile
    * https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
    Here explain how to restore it
    *https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile

  • I need help using my ipod on multiple computers!

    Okay so i got my Ipod on my iMac, and i usually download music from that computer to the ipod and it automatically syncs what i have on my itunes to the ipod, but i recently got a mac book pro, and i read on the apple support page that to transfer music from a secondary computer you have to connect the ipod to the secondary computer and set the ipod to "manually manage songs and videos" however when i select this option, and click apple, it still tells me i have to erase all the music on the ipod currently and replace it with whats on the secondary computer (macbook), all i want to do is be able to take one or two songs that i download from my macbook and put it on the ipod without having to erase everything.
    PLEASE HELP!!

    B_Ram wrote:
    Could it be because its an iPhone and not a true iPod???
    i doubt it.
    actually, syncing an iPod Touch (or iPhone) with multiple computers is not recommended @ all. click here to find out what Apple has to say about it.
    all i can think of, i you really must do that, is this:
    to prevent a sync when plugging in the iPod - hold down the option and the command ( on a PC that would be the shift and ctrl ) keys when plugging in the ipod - keep pressing the keys until the iPod is listed under the devices list in iTunes. now you should be able to do what you want.
    however, you do so @ your own peril, as the article above outlined.
    alternatively, consider a setup such as this.
    good luck !
    JGG

  • Multiple iPods with Multiple computers

    I have two iPods and each syncs with a different machine. Each has a unique music library. What would happen if I switched iPods. i.e. plugging two different iPods into one machine? Will they somehow merge the libraries, or will iTunes just complain that I'm confused.
    Thanks,

    Have a look at this article: How To Use Multiple iPods with One Computer
    Also, before you connect an iPod that is currently linked to a different library, read this one: Using iPod with Multiple computers

  • Audio engine overloaded (this is not the usual problem!)

    Hi people
    it's so frustrating I could cry. This is not the usual "I have 10 software synth running and get overload message".
    Bottom line is: Even with a new project and logic stopped the CPU meters go up to 100%. It happens every 5 - 15 secs. What is strange that the system monitor does not show these spikes. I know it's just sampling but at least some of the spikes should be caught by the monitor. But it's steady at around 10-15% user and system. There is of course no other process eating cpu.
    Console looks like this:
    Mar 5 00:34:13 noname Logic Pro[902]: Audio engine overloaded, resetting
    Mar 5 00:34:43: --- last message repeated 1 time ---
    Mar 5 00:37:11 noname Logic Pro[902]: Audio engine overloaded, resetting
    Mar 5 00:39:34 noname Logic Pro[902]: Audio engine overloaded, resetting
    Mar 5 00:40:04: --- last message repeated 1 time ---
    Mar 5 00:41:15 noname Logic Pro[902]: Audio engine overloaded, resetting
    Mar 5 00:42:40 noname Logic Pro[902]: Audio engine overloaded, resetting
    I swear: yesterday everything was fine. Now it's not working anymore. I'm a developer with 10 years coding and debugging experience but I can't find the solution. I had this problem before. Everything was running smoothly for months and one bad day the problem started. I could not find a solution till I gave up and reinstalled the whole system which took me about 3 days to get everything in place again. Again everything fine for about 3 months.
    Not matter what I try - deleting prefs. Starting logic as a new user. Reinitializing everything. Doesn't help. Is there anybody out there who had that problem too? I don't want to reinstall everything again.
    Cheers,
    Daniel
    Message was edited by: doubleday

    I using a Line6 TonePort (I am a guitarist).
    To make sure that its not the drive (though nothing changed there) I switched setting to internal audio - but that didn't change a thing.
    And yes I tried the basics. I also disabled all plugins / AUs in the AU-Manager but I haven't tried to move them away. Give that a try this eve.
    It's really strange. It doesn't matter wether it's a new empty project or any other that worked with no probs. Even if logic is stopped and there's no input monitoring: CPU load is flat and then every xyz secs boooom 100%. And its real because it actually interrupts the sound of my guitar or whatever.
    I might have to dig deeper and see if I find any tracing tools which might provide more info..
    Aaaaargh!
    The only thing I actually might tried the first time yesterday evening which I haven't done before is a roland vdrum via midi to ultrabeat but how could that mess things up? I dunno ...

  • Can't join CD tracks - no, not the usual problem

    Help,
    This is NOT the problem where the tracks are out of order so the Join CD Tracks is grayed out. It's a different problem.
    I load audiobook CDs to play on my iPod - have been doing it for years.
    I join the tracks so that each CD is only one entry in iTunes.
    As of the last few days, when I try to join CD tracks, it says it's joining hundreds of tracks, and when I drag the joined tracks to my itunes folder it just chimes and refuses to copy.
    In the past, the little drag icon would list the number of joined tracks (like 12), now it shows a number like 283. And it won't copy. I did a software update recently. Has something changed to this feature?
    OSX 10.6.6
    iTunes 10.2.1 (1)

    Rebooted all macs to run off iTunes 9, a much better version of iTunes, and wouldn't you know, join tracks works just fine.  Reinstalled 10.2 onto one of the computers and still get same software problem of joined tracks not importing.  If you join the tracks in the middle of an album, and then import the entire album, only the tracks that fall after the joined tracks import and nothing else. 
    I suggest having a working version of iTunes like 9 on your computer for the joined tracks feature.  I only use 10.2 now for uploading to ipad since apple is forcing paying customers to use that version for the ipad and other players because older more stable versions of itunes don't work with the new hardware.  Choice is something that is disappearing with apple products.  It's a shame.

  • Can I use creative cloud with multiple computers?

    I have a pc and a Mac and an Ipad.  Can I have one account and use all of these devices?  Also, I plan on upgrading my Mac.

    Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
    -Windows or Mac does not matter... 2 on the same operating system, or 1 on each
    Remove license on a computer http://forums.adobe.com/thread/1442423?tstart=0 may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  • Use Finder Tags with multiple computers

    How do we keep Finder Tag names in sync for files saved in Dropbox or iCloud?
    After I can add tags to files in my rMBP and assign colours to them, these files are kept in sync with my iMac through Dropbox.
    In my iMac, while the new colours are reflected in the same files, the Tag names are not.
    Is this how its supposed to work?

    To seems problem to be the effect of you rename the defult Finder tags (the ones replacing Finder labels) instead of making new ones.
    So this made the trick for me:
    1. Created completely new tags whith the names I wanted
    2. Gave the new tags colors
    3. In Finder settings, removed the default tags from the sidebar and the contextual menu, putting the new ones in their place.
    Then at least tagnames - and colors and sidebar settings – was synced via iCloud and Dropbox. I think this will be the case for server volumes as well.

  • How do  I refill my 2 GB ipod with only music, not the "other" stuff

    When I load songs on my ipod, more than half of my disc space is used by "other".  I just want songs.  This is the new 6th gen ipod.  My older shuffle never had this issue.

    The only options I have to check/uncheck are as follows:
    1. Open iTunes when this iPod is connected
    2. Sync only checked songs
    3. Enable sound check
    4. Convert higher bit rate songs to 128kbps AAC
    5. Manually manage music
    6. Enable disc use
    options 1, 2, 5 and 6 are checked

  • IMac Fan Noise - Not The Usual Problem

    Hi,
    I have seen plenty of discussions on iMac fan noise but mine is a little different. A week ago, a 'tink' noise (similar to tapping your fingernail on a glass) started coming from my mid 2011 iMac. At first, I thought it was the "click of death" for my hard drive, so I replaced it myself. This didn't fix the noise, so I ran an extended hardware test. This came back with a 4MEM error. I had some spare RAM, fitted it, ran the test again, no 4MEM error.
    So, I booted the iMac again. 'Tink'... 'tink'. I finally located it to the bottom right of my iMac, where the optical drive fan is located. This fan has always rattled a little now and again but now it seems intent on driving me round the bend with its very own form of torture. At first, the 'tink' was now and again, but now it constant. 'tinktinktinktinktink'. Is there a way to stop the optical fan for now? I don't use the optical drive often anyway. Or would it just be a replacement fan?
    Resetting SMC or PRAM does nothing.

    This may be way off target, in which case ignore me. Do you have an app called Free Memory installed? There have been a few posts on here where it seems to cause repetitive odd noises to occur, particularly when running Mavericks?

  • Cannot drop pictures into video effects window (not the usual problem)

    Hi there,
    I cannot drop jpgs into the video effects window. I checked http://discussions.apple.com/thread.jspa?messageID=5700460&#5700460 and http://discussions.apple.com/thread.jspa?messageID=7384222&#7384222 and they got me going, but my issue is slightly different.
    The plus sign appears when I click and drag the picture out of finder and into one of the open windows in video effects user backdrop window. When I release the mouse button, nothing is dragged to the location. I have tried different picture locations, moved them to the desktop first, and different picture locations, but no luck.
    Any ideas? I’ll run disk perms in the meantime in case it is something goofy, but if anyone has any ideas I’d be grateful. Just got my first Mac two days ago and love it so far

    Hi,
    Did the Pic file come from another computer ?
    Manually navigate to the Pic.
    Highlight it and do a "Get Info" (Apple Key and I together)
    DO you Own it and have Read and Write Access (near the bottom when you expand the various tabs).
    Make sure you are the Owner and have Read and Write access.
    9:03 PM Monday; December 8, 2008

  • Using iPod on multiple computers

    I am extemely confused. I am trying to sync my iPod on two computers: my desktop and my laptop. The iPod (nano 1GB) was first set up on my desktop. Now i have installed iTunes on my laptop. I inserted the iPod into the USB port. But the songs are not bolded and they cant be played on my laptop or put into the laptops library. I need help because I am in the process of moving and cant get to my desktop because it is packed. The iPod needs to sync to the laptop.
    I am very grateful for any help at all.
    iPod Nano   Windows XP  

    Confusd.....hopefully this link will help you be just "nanouser"
    Using an iPod with multiple computers
    Good luck

Maybe you are looking for

  • When trying to download firefox I get a message that says can't download/ connection reset

    I ran into some malware over the weekend. Did a system restoration. I've tried several times to download firefox. Each time it runs for a minute or two and then I get a message that says can't download; connection was reset.

  • How do i get apps off my ipad

    how do i get a apps off my ipad.

  • AUTO RESOLVE FUNCTION ISSUE REVISITED

    Thanks guys for your responses to my auto resolve question. Sorry, I think I gave you some wrong information. I used the Canon EOS Utility software to download my images directly from my camera. It automatically created a Destination Folder to Pictur

  • MBP Early 2009 17" HDD 'clicking'

    I have a MBP 17" that was manufactured in early 2009 that is making clicking sounds. Originally the macbook made the noise constantly, a gentle click-click sound and not booting up. It just showed a grey screen with an icon that it could not find the

  • Flash menu doesn't work after opening an external link.

    Hi, I have this problem - I made a simple website with a flash menu, that opens internal links in an iframe. However, I have a few other (not included in the menu) external links, which open in the same iframe. And after I click on one of them and it