Using my MacPro to install on a hard drive for an iMac?

I doubt this it the proper place for this, but don't know where I should be. My friend has an iMac with Snow Leopard that needs a new hard drive. He wants me to re-install his OS X and software for him. Since he lives miles away he is sending the new hard drive as well as the software for the install. Is it possible for me to install the hard drive in my MacPro then send it back to him and still have it work in his iMac? (The new hard drive would be installed in his iMac.)
If this will not work, can you suggest the proper way of going about it without using his computer?

Yes, you should be able to help him out. Be sure to prep the new drive:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
After formatting has completed quit DU and return to the installer. Install OS X. You can restore his software after installation. If he sends his software on another hard drive, then you can use the Setup Assistant to restore from his backup.

Similar Messages

I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?

Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated.

Keep getting a "the disk you inserted was not readable by this computer" when I insert my printer cord into either USB port. Recently installed a portable hard drive for back up purposes. Related?

Keep getting a "the disk you inserted was not readable by this computer" when I insert my printer cord into either USB port. Recently installed a portable hard drive for back up purposes. Related?

Does your printer have a slot for an SD card? Is there are card in the slot? If so, the computer is trying to mount that card as an external device. It might be corrupted so that it can't be read.

Is it possible to use aMacBoock Pro as a hard drive for my iMac?

Is it possible to use aMacBoock Pro as a hard drive for my iMac?

Yes, if both machines have FireWire ports (400 or 800, they're both OK):
http://support.apple.com/kb/HT1661
Probably (maybe?), if both machines have Thunderbolt ports and you have a Thunderbolt cable:
http://www.cultofmac.com/thunderbolt-target-disk-mode-requires-apples-special-ca ble-tip/103270
If the same port isn't available on both machines, I don't think so.

Hello, how would I go about using my time capsule as an external hard drive for my Mac book pro?

Anybody know if I can use my time capsule as an external hard drive for Mac book pro?

Just recognise the following.
Store files on the TC.
https://discussions.apple.com/message/24380694#24380694
This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
The TC is not suitable for network file server.. but many people having no choice press it into service as such.
It cannot be partitioned. It was and is and ever shall be a backup device for Time Machine.
Major issues.
1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. And you will need to buy a third party like CCC to do backup.
2. The TC cannot be partitioned and mixing TM backups and data is not great.
3. The drive is slow to spin up and quick to spin down.. there is no controls.
4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
5. iTunes will constantly lose connection to the library. The disk is too slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
Read pondini for some work arounds.
Q3 here. http://pondini.org/TM/Time_Capsule.html

Do i need to buy the same hard driver for my iMac or i can buy any hard driver 3.5?

Do i need to buy the same hard driver for my iMac or i can buy any hard driver 3.5?

You can buy any 3'5" SATA hard drive for the iMac. You can buy a hard drive at OWC.
Note that Late 2009 and newer iMacs have the temperature sensor inside the hard drive, so it's important to get one with that sensor. In this case, I recommend you to take your computer to an Apple Store or reseller and get your hard disk replaced

HT201250 installing a new hard drive in my iMac

Can I restart my iMac using my back up HD after installing a new hard drive. I bought my Mac with a 500 GB drive thinking this would be enough for a long time.
Whoops, Not with high res pictures and downloaded movies at 2 and 4 gigs each. I would like to install a 2 TB hard drive 3.5 instead.

The iMac's hard drive is rather difficult to get to. You can replace it but will have to get through the front panel, which is not a simple task. Additionally, on at least some systems (I believe the iMac is one of them) Apple uses a special hard drive firmware, without which the system fans will blare at full blast.
I'd recommend you get a large external drive (and perhaps consider a multi-disk array like a Drobo or Pegasus, among many others) that can give you expandable storage options. Alternatively, using multiple external drives is another option.

Had to install a new hard drive early 2008 iMac, now can't restore from Time Machine.

Had to install a new hard drive in a early 2008 iMac, now can't restore from Time Machine. Backups show in Time Machine but I can't select them.
Serial Number QP*****1LW
<Edited by Host>

Here are some notes on Time Machine problems.
http://pondini.org/TM/
Troubleshooting.html
I have asked the hosts that your serial number be removed. Best not to publish it,

CPU is very hot when using Thunderbolt display and mac attached USB hard drive for TimeMachine

Hello,
i've bought the new MacBook Pro 15" and a Thunderbolt display. Everything works fine for me due to the latest updates, but i experience an issue which i really don't understand. When i connect an usb hard drive for TimeMachine to my display it works like expected (CPU has a temperature of 64°C), but when i connect it to an usb port of the mac while using my display the CPU temperature goes crazy (spikes about 80°C) and it gets very noisy. Has anyone else experienced this behaviour?
May this has something to do with the dual graphics adapter and how the system handles the data stream to thunderbold ports and usb devices? Which graphics card is used for the external display, the internal gpu or the adapter from ati? I've googled a lot but haven't found appropriet answers about these questions.

Hi there ulairi9!
I understand how this would be a frustrating issue! I have an article here that can provide some troubleshooting steps for you, and can hopefully help you resolve the issue. That article specifically addresses the issue you are experiencing, and can be found here:
AirPort Extreme and Time Capsule: External USB drive becomes inaccessible
http://support.apple.com/kb/TS3271
Thanks for using the Apple Support Communities!
Cheers,
Braden

Time Capsule as Hard Drive for older iMac

After upgrading to Snow Leopard on my MacBook, my family now has four laptops that can take advantage of time machine for wireless backups, so I want to buy time capsule to do that easily. Will I also be able to use it as a hard drive for an older non-intel iMac that can't be upgraded from Tiger to Leopard? In other words, will I be able to simply drag files to time capsule via ethernet or USB (no airport card on the iMac either!)

Will I also be able to use it as a hard drive for an older non-intel iMac that can't be upgraded from Tiger to Leopard?
Yes.
In other words, will I be able to simply drag files to time capsule via ethernet or USB (no airport card on the iMac either!)
Through Ethernet. USB won't work.
(47935)

How to restore machine using a TM backup on a usb hard drive from older imac to a brand new iMac?

My imac (the one that had a superdrive in it), had a broken superdrive and was sent for repair. Whilst being "repaired" the screen was broken. I now have a brand new imac albeit without a dvd drive. My question is how to I restore my the old TM back up which had been made to an external usb hard drive to the new imac. Help files say that I should not restore from a TM file to a different machine and that I should use migration assistant. Whilst I can see the external usb drive in TM it is not being recognised in Migration assistant when I click on back up from a TM backup on another machine or disk.
Any ideas?
Just noticed that this new machine is running OSX 10.8.4 the broken imac was on mavericks

This is very simple first run Software Update on the new machine and get your machine upgraded to the most recent version of Mountain Lion 10.8.5. Install all other software updates Apple recommends in Software Update. Then care fully read Pondini's guide on using Migration Assistant located at:
http://pondini.org/OSX/MigrateLion.html
Your migrated data will be in a new account, to access it log into the new account.
Also DO NOT repeat DO NOTuse Wi-Fi to migrate data, if your TM backup drive uses USB, then connect it via USB and follow the on-screen instructions as described in Pondini's guide.

How can I use a windows netbook as a wireless hard drive for a Macbook Pro?

I have an old Acer Aspire One netbook sitting around and a 2TB WD hard drive that I use with my Macbook Pro 15" running Mavericks. I was wondering if anyone had an ideas how I could wirelessly access the netbook with the WD external HD attached from the Macbook Pro. Furthermore does anyone have any ideas how I can use the netbook as an airplay client so I can stream my Mac, iPad, or iPhone to my netbook which would be plugged via VGA into a TV?
Any help would be greatly appreciated!
-Micah

Download and install the airport utility for windows.. it isn't strictly necessary but the bonjour service makes life easier.
The request for username and password is correct. Username is whatever you like.. but windows needs it.. so admin.. being the common router one.. password by default is public unless you changed it.
Now to get the TC to work properly..
1. The names should be SMB compliant.. by default they are wrong.. use short names, no spaces no special characters.. pure alphanumeric. That is for TC name and wireless names.
2. Wireless passwords should also be same use WPA2 private.
3. In the disk sharing page.. manual setup.. put in the windows workgroup name.. ie WORKGROUP.. this helps the discovery process.
4. In the same area, turn on the guest account to read and write.. not necessary but helps with later versions of windows particularly.
5. Access the drive by using the direct IP address. ie in Windows Explorer address bar, \\10.0.1.1 (or whatever IP the TC is at).

I want to use a fantom diamond as an external hard drive for my mac, is this a good idea?

Using a Macbook pro, with Snow Leopard (I think), and my memory is full so I want to store my stuff on an external hard drive. I found a 2T Fantom Diamond EHD, but I'm now learning that I have to convert to NTFS-3g. I'm not computer savy so I want to know if this is a good idea, or should I look for something different. Also, can I set up the EHD as the default path for itunes?

This is not the forum for MacBook Pro owners.
You just need to reformat the drive in Disk Utility and erase the drive and have Mac HFS.
If you did need to use NTFS then you would not want -3G but Paragon NTFS for OS X x. 10.0
Or buy something that isn't pre-formatted to Windows NT file system.
First though make sure you have backups of your system. TimeMachine being used now?
http://macperformanceguide.com/Mac-TimeMachine-drive.html
http://www.apple.com/support/timemachine/
Maybe cleanout some files you don't need.
Install a larger notebook hard drive even.
http://www.macsales.com/firewire has a lot of choice in Mac compatible drives and enclosures so you don't need to worry about Fantom not working at some point.
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard

Trying to install SL on a new hard-drive for my iMac, when asked which disk to install on it gave me no options, i followed advice from another forum and created a partition, now can't boot from the new drive at all. Help?

I've had **** with my iMac, the hard-drive failed so i replaced it with a new 1TB Samsung drive. Then when i tried to install SL from the install disk, all went to plan until it asked me which drive i wanted to install it on, where it came up with a box where my options should have been, but instead it didn't give me any options to install it on any drive i.e. it asked which drive i wanted to install it on but no drives came up to select.
So i followed the advice from another forum, look at the 'Extended Hard-drive preparation' response
( https://discussions.apple.com/message/10576009#10576009 )
After following these instructions i have now got a new partition, but when i restarted my computer to install SL on the drive, the option to boot from the drive is now not available, now i must boot from the install disk, whereas before i was able to boot from either the install disk or the hard drive. The hard drive is still visible in disk utility as it always has been, but i am now unable to boot from it, let alone install SL.
Please help my iMac has been broken for months and i've been trying to fix it for so long and am getting problem after problem. Thank you!
<div class="mcePaste" id="_mcePaste" style="position: absolute; left: -10000px; top: 0px; width: 1px; height: 1px; overflow-x: hidden; overflow-y: hidden;" mcestyle="position: absolute; left: -10000px; top: 0px; width: 1px; height: 1px; overflow-x: hidden; overflow-y: hidden;"></div>

Hi db2
That off the shelf MS-DOS / FAT-32 drive needs to re-partitioned GUID Partition Table / Mac OS Extended (Journaled) before you can install OS X and Startup your Intel iMac from it.
1. Boot from your original install or retail SL DVD and open Disk Utility.
2. Highlight the new HD in the list of drives and select the Partition tab.
3. Under Volume Scheme select 1 Partition and click on the Options... button.
4. Select GUID Partition Table in the drop down window and click OK.
5. Set the Format to Mac OS Extended (Journaled) and click the Apply button.
6. Once thats done, then you can do a clean SL Install, Restore from TM , your old HD or Bootable Clone.
Dennis

How can I use my Time Capsule as an external Hard Drive for my PC? My PC can't find it.

Hi, I just bought this Time Capsule for my home. I've got the internet access for all my devices (Mac, iPad, PC, iPhone) and I've got the Mac backup working through Time Machine. I'm supposed to be able to use the Time Capsule as an external drive for my PC, but I can't figure it out. My PC doesn't recognize the Time Capsule as a Network Place. I called AppleCare, but they don't have all the answers for "PC issues." They tried to get me to Map a Network Drive, but my PC popped up a window asking for a Username and Password. It looks like something similar to when I VPN into my company network from home.
I'm using Windows XP Professional, Version 2002, Service Pack 3.
Any help would be appreciated.
Thanks!

Download and install the airport utility for windows.. it isn't strictly necessary but the bonjour service makes life easier.
The request for username and password is correct. Username is whatever you like.. but windows needs it.. so admin.. being the common router one.. password by default is public unless you changed it.
Now to get the TC to work properly..
1. The names should be SMB compliant.. by default they are wrong.. use short names, no spaces no special characters.. pure alphanumeric. That is for TC name and wireless names.
2. Wireless passwords should also be same use WPA2 private.
3. In the disk sharing page.. manual setup.. put in the windows workgroup name.. ie WORKGROUP.. this helps the discovery process.
4. In the same area, turn on the guest account to read and write.. not necessary but helps with later versions of windows particularly.
5. Access the drive by using the direct IP address. ie in Windows Explorer address bar, \\10.0.1.1 (or whatever IP the TC is at).

Using my MacPro to install on a hard drive for an iMac?

Similar Messages

Maybe you are looking for