Using myipoid 2gb with windows 98se

Can somebody possibly tell me if i can use my ipod 2gb with windows 98 se ? and if i can how do i do this ? thanks

iTunes is supported for Windows XP and 2000 only, so unless you upgrade your PC’s OS, you won't be fully supported and will not be able to purchase music tracks from the iTunes Music Store which is only possible through iTunes.
For just synchronizing music tracks with your iPod, you could get third-party utility such as.....
Anapod Explorer
XPlay
EphPod
vPod
....for handling the music transfer (Google for them and others). Some may not work with your OS, some might.

Similar Messages

I had an iPad2 and use a PC with windows xp to synchronize iTunes. Now i have a Mackbook Pro. How do I synchronize my Ipad to the new macbook without losing all my data?

I had an iPad2 and use a PC with windows xp to synchronize iTunes. Now i have a Mackbook Pro. How do I synchronize my Ipad to the new macbook without losing all my data?

On the MacBook launch iTunes.
From the menu bar click Store / Authorize This Computer.
Now sync your iPhone.
Apple - Support - iPhone - Syncing

Is there a way to use PM4.0 with Windows XPH?

Is there a way to use PM4.0 with Windows XPH without purchasing the latest suite or upgrades? I origionally purchased a suite with Pagemaker, Photostyler and Freehand just before Aldus went Adobe, and Win3.1 went Win95, then WinME and WinXP. I miss PM and have several manyscripts saved on PM4.0 and can not export or import them to any current wordprocessing programs. I was very far into one manuscript and am now in a position to finish it up but don't want to have to purchase a whole suite in order to do so. Any suggestions for this old tightwad? [email protected]

Jay Chevako wrote:
Find an old computer and run win3.1.
Jay
Shouldn't that be Win3.0 c.1991? And with a very early of version ATM (Ver 2?) if you want to do anything with fonts?
I think I have a WinME PC in the garage, which if you can re-format with DOS 5 and install Win3 instead (I may have the disks in the garage too), PM4 will positively scream along.
I reckon it's non starter on a modern WinXP PC, as the OS is so different, but if you're willing to experiment, you never know!
But if you want to open some old files to extract the text, you can open the PM4 files and save them with a d/l'ed trial copy of PM7, which will be OK on WinXP
Iechyd da! John
23:45 27/04/2009

Using an iPod with Windows Me

As far as I know, you can't use iTunes with Windows Me. I knew that when I bought my iPod, but I figured surely I'd be able to use it without iTunes--with a different program, maybe, like Winamp. Apparently not: my computer wouldn't recognize the iPod as anything but a removable drive, which was fine, except I couldn't play anything on it that way. Tried the installation software that came with the iPod and was told it wouldn't work on anything but a Windows 2000 or XP either.
So then I thought, hey, I've got a semi-functioning Mac OS X at work; I'll just use that to put everything on my iPod, even if I can't use iTunes at home. Great, except it doesn't have the right version of iTunes, won't go online to upgrade, and demands a password to install from the CD. Again using it as an external hard drive, I stick something on it anyway and try to bring it home, whereupon my Windows Me tells me that the iPod needs to be formatted.
This is all making me crazy, because I paid good money for that iPod and I'd really love to, you know, use it. Is there any possible way I can use this iPod with Windows Me, with or without iTunes? Some kind of plug-in I can download, maybe?
Windows ME

groans
I finally figured I had nothing to lose--I'd just downloaded a new version of Real Player, which supposedly will work with iPods and Windows Me--and I let my computer format the iPod, hoping that would let it work with Windows again. Apparently not. Now it won't turn on--it's giving me the folder-and-exclamation-point icon. Resetting it didn't help, and I can't restore it because I can't install the software to my computer in the first place.
I suppose the only thing to do is borrow a friend's computer or something.

How do I make a 20 X 30 print with layers of 16 X 20, 12 X 18, 11 X 14, 8 X 12, 8 X 10, 5 X 7 and 4 X 6 of the same image to display the different sizes available to someone? Using Elements 13 with Windows 8.1

How do I make a 20 X 30 print with layers of 16 X 20, 12 X 18, 11 X 14, 8 X 12, 8 X 10, 5 X 7 and 4 X 6 of the same image to display the different sizes available to someone? Using Elements 13 with Windows 8.1
A senior citizen needs some help.
Thanks

Saving each image as different size - is it an option for you? I would save images with their name as: 20x30.png, 16x20.png etc etc.
Or explain whether you want these in a webpage in which case only one image is necessary and different sizes are displayed with good CSS code. this is question for Dreamweaver forum if this is what you want.

I am using a PC with window 7 and adobe photoshop 12. I have followed Photoshop Elements Help and I still have the same problem. When I try to backup Photoshop 12 it has stop on7% when calculating Total Media size. What can I do?

I am using a PC with window 7 and adobe photoshop 12. I have followed Photoshop Elements Help and I still have the same problem. When I try to backup Photoshop 12 it has stop on7% when calculating Total Media size. What can I do?

Hi Prabhuram and falez,
This issue appears where there are any inconsistencies in your catalog (generally for video files). This issue may be due to offline files, missing files, video scenes. The recommendation here would be to fix these inconsistencies and try again. If that doesn't solve the issue, please follow steps mentioned in email by me.
~Surendra

How can I have a single cursor using elements 9 with Windows 7?

Currently the cursor on my screen is 3 small boxes in place of the single arrow. I am using Photoshop Elements 9 With Windows 7. I have loaded the patch files currently in the Adobe system without any success.

Thank-you that solved the issue.
In a message dated 4/20/2014 8:57:10 P.M. Eastern Daylight Time,
[email protected] writes:
Re: How can I have a single cursor using elements 9 with Windows 7?
created by Barbara B. (http://forums.adobe.com/people/Barbara+B.) in
Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/6315096#6315096)

Can I use Photoshop Cs5 with windows 8? was told by tech guys at best buy that we couldn't.....

can I use Photoshop Cs5 with windows 8? was told by tech guys at best buy that we couldn't.....

You might want to check this thread. Some have had success with CS5 on Windows 8, others not so lucky.
http://forums.adobe.com/message/4840878
You can try and see for yourself,but I don't think the Best Buy techs were trying to upsell you.
Gene

Can I use Illustrator 9 with Windows 7 OS?

Can I use Illustrator 9 with windows 7 OS?

taciadomrose,
You may need to run the computer in XP mode to install it (you may try in normal mode first). Here is how:
http://windows.microsoft.com/en-us/windows7/install-and-use-windows-xp-mode-in-windows-7
Once installed, you should be able to get it to run with the PC in normal mode as follows (first run):
1) RightClick the shortcut;
2) Click Properties;
3) Click Compatibility;
4) Tick Run this program in Compatibility mode for, then select XP in the dropdown list;
5) Start AI9.
After that, you can just DoubleClick the shortcut.

MS6712 Video and LAN problems with Windows 98SE

Can anyone help please with a problem that’s been baffling me for weeks.I
The computer in question is a TIME Powerstation with AMD 2600+ processor with 1024MB RAM, Nvidia Geforce FX5200 and Windows XP Home.
Have set this computer to Dual Boot to Windows 98SE (Using Acronis OS Selector software).
My problem is that after many attempts, have so far been unable to successfully load drivers for the Nvidia GeForce FX5200 graphics card or to get the LAN function to work in Windows 98.
For the graphics card have tried a number of the more recent Nvidia Detonator Win98 drivers, all have either produced an error message (‘While initialising device IFSMGR: Windows Protection Error’) or a blank screen. Necessitating reverting back to the Standard VGA Driver with its maximum of 16 colours! The LAN function does not work at all in Windows 98SE, though it does in Windows XP – again suspect a driver problem.
The motherboard of this computer is a MSI Microstar MS6712. Have tried the ‘VIA Chipset 4 in 1 Driver’ to no avail. Are any more/different drivers required for Windows 98SE?
Would appreciate any advice in what originally was envisaged as a simple task: getting Nvidia Geforce FX 5200 graphics card and the motherboard’s built in LAN to run correctly on Windows 98.

I have your board.
1. Windows 98 won't recognize more then 512MB of RAM.
2. I had problems with the FX 5200 Ultra on this board. Occasionally when I booted the system, I would get a black screen right after the post when the OS was about to load. I've been hearing a few people lately stating problems with the KT4V-L mobo and the FX 5200 Ultra. I promptly returned the card and got a Radeon 9700 Pro instead. I have never been more happy since I made that decision. I will never put another Nvidia card in this mobo again. I also had issues with the Geforce4 MX card I had. I've come to the conclusion that Nvidia sucks.
3. Make sure your BIOS is updated to 1.9, and al lyour VIA drivers are updated. That may help you too.
That's all I can offer.

I bought macbook pro at cash america used and loaded with windows 7 ultimate by boot camp.My questions is it has mountain lion loaded but original ower has name with password so how can I reload so I can sign on as administrator for downloads and upgrades

I bought a 13 inch macbook pro9.2 at Cash America with windows 7 Ultimate with boot camp program.
The Mac op sytem has Mountain Lion installed but the previous ower has his name and password attached to it and can only use as guest.
My question is how do I get around this to be administrator to reload software so i can use mountain Lion,and not loose the windows op .

If you reformat the partition that contain Mountain Lion and reinstall Mountain Lion, it should not effect the Windows pratition.
Have said that I suggest you backup everything you might want to save just in case.
Allan

Using m4a files with window moviemaker

i'm new to itunes. I'm trying to use m4a audio files with windows moviemaker but could not. is there a way to change file ext or to download in mp3 form?
thanks

Open the General section of the iTunes preferences, click the Import Settings button, change the default encoder to MP3, drag the songs into iTunes, right-click them, and convert them.
(44585)

While using fire fox with windows 7. and you hit the back arrow. random pages start to pop up.

while using firefox with windows 7 every time i click the back arrow it will load a random page behind what i am looking at. any thing from gamevance to home refinancing to some mozilla pages.
== This happened ==
Every time Firefox opened
== i installed firefox

Do you still have the Bookmarks Toolbar visible with the bookmarks on it?
If that is the case then see:
*https://support.mozilla.org/kb/Restore+the+default+Smart+Bookmarks+Folders
Otherwise check this:
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible:
*Firefox > Options
*"View > Toolbars"
Open the Customize window to set which toolbar items to display:
*View > Toolbars > Customize
*Firefox > Options > Toolbar Layout
*Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
*https://support.mozilla.org/kb/How+to+customize+the+toolbar
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

HT1353 How to use older iPod with Windows 7 & latest iTunes?

I have ipod classic 5th generation 30g that still has a lot of my music on it. My computer with iTunes version that synched with it crashed. New VAIO Windows 7 laptop can't recognize the hardware. Where can I get a driver for the VAIO Windows 7? Can I use my iPod with the latest iTunes? Will I ever be able to load new music to this older iPod?

I fixed this by un-installing iTunes. Next installed latest version for 64bit Windows 7. Opened iTunes and connected my iPod to my laptop using the USB cable. The driver was automatically updated and iTunes was able to recognize the older iPod and copied all my purchased music to iTunes on my new VAIO.
Yeaaa!

Using multiple drives with Windows 7 Backup

I have a customer with a new PC running Windows 7 Pro. He has 3 Seagate 1TB USB drives that he swaps out nightly for backups. Currently, backups are being done using the built-in Windows 7 Backup.
His previous PC ran XP and used the program which is pre-loaded onto Seagate drives to install onto PCs. He used this with the 3 drives and had no problems.
However, this software on the drives would not install on his Windows 7 PC because I presume it to not be compatible, even in compatibility mode.
The problem now is that each time he swaps in a different drive, the backups fail because it's a different drive and the backup software can't seem to handle multiple drives. With Windows Server Backup, you can add multiple drives so that when you swap them,
backups still run. I can't seem to do that with Windows 7 Backup.
Does anyone know how to get multiple drives to work with the built-in Windows 7 Backup?
Jonathan

In addition to the above persons' solution, you can choose a third software instead of the built-in Windows 7 Backup tool, the backup software can make up for the deficiency of the backup tool of Windows. You can search in Google, and
will find many kinds of software, Genie backup and AOMEI Backupper: http://www.backup-utility.com/ can be ok. Hope the freeware can give you suggestion.
AOMEI turned out to be the answer. It works well with multiple drives and provides an easy way the user can see if the backup succeeded or not. Thanks!
Jonathan

Using myipoid 2gb with windows 98se

Similar Messages

Maybe you are looking for