USING N70 AND I CAN'T SEND MESSAGE it sends comman...

hello everyone!
 i have latest software updated on my N70 recently ,it was working fine but now again its not sending messages.It gives error:unable to send message ..
i don't know what to do...i can't even reinstall the software as i have the latest...please help me as it's driving me mad ..i love my phone
p: i have formatted my memory card already and reset my phone couple of times and phone memory doesn't have much saved either but still it ain't working!!! please anyone who can HELP awaiting response from you!

Did you try the 3 finger deep reset? If not you could try it.
- Backup your phone
- Turn off PIN code requests.
- Make sure phone is charged
- Turn off the phone.
- Remove the memory card
- Put the phone on a table (easier to press the keys then).
- Press the three keys green, 3,  and * and keep them securely down and do not release.
- While the keys are still down, turn the power on.
- Do not release the three keys until you ear the start tone

Similar Messages

  • Our office uses Thunderbird and has been receiving unusual messages and been unable to work effectively since Friday April 9, 2014. Whenever trying to send a

    Our office uses Thunderbird and has been receiving unusual messages and been unable to work effectively since Friday April 9, 2014.
    Whenever trying to send a message we receive a window message that says:
    Add Security Exception
    You are about to override how Thunderbird identifies this site.
    Legitimate banks, stores, and other public sites will not ask you to do this.
    Server
    Location: mail.greatersyracuseworks.org Get Certificate
    Certificate Status
    This site attempts to identify itself with invalid information. View
    Wrong Site
    Certificate belongs to a different site, which could indicate an identity theft.
    When we open the Certificate status window, it indicates that the Validity was issued 4/9/14 (when our problems started)
    As of today we can receive messages but not send anything…very annoying.
    Is this related to the recent Heartbleed bug or is something else going on?
    What are our options to restore service?
    Thanks for any help!

    Is Thunderbird mistaken about the certificate listing a host name other than your mail server, or is the error interpreting the certificate correctly?
    You can check in two places:
    * on the first tab of the certificate viewer, "Common Name"
    * on the second tab of the certificate viewer, lower box, Extensions category, look for "Certificate Subject Alt Name" to see whether the certificate covers multiple different host names

  • For about 3 month I receive on my iPhone 3GS iOS6 and my iPad iOS5 empty messages without sender and subject in the mailbox BAL but not in the direct mailbox addresses. I cannot get rid of this messages. Can someone help me.  Thanks

    For about 3 month I receive on my iPhone 3GS iOS6 and my iPad iOS5 empty messages without sender and subject in the mailbox BAL but not in the direct mailbox addresses. I cannot get rid of this messages. Can someone help me.  Thanks !

    Disable Yahoo Messenger (with the arrow on the right of your account name) in Yahoo mail.

  • HT4847 My sons iPhone is under my apple id. He completed a software update earlier and now receives my text messages I send and receive- how do I disable this feature??

    My sons iPhone is under my apple id. He completed a software update earlier and now receives my text messages I send and receive- how do I disable this feature??

    This happens when you both use the same Apple ID for iMessage.  You can continue to share the same ID for pruchasing from the iTunes & App stores, but you should be using a different ID for iMessage.  To fix this you have two choices:
    On one of the phones go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID (so you are both using a different ID for iMessage); or
    On both phones go to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at".  Also uncheck anyone else's phone number, if present.

  • I unlocked my iPhone 3S last October and now I did an reset . Can be this lock agai?  Because I'm trying to use it and I can't !

    I unlocked my iPhone and after a couple of months I did reset. Now I want to use it and I can't . What could happened? It is locked again after my reset ?

    How did you do the unlock? If you didn't contact the cell carrier to whom the iPhone was locked and arrange for an official unlocking, then your iPhone was hacked to unlock it and if you restored or upgraded iOS on the iPhone, the unlock has now been removed and the iPhone locked back to the original carrier. Only the carrier can authorize official unlocking.
    Regards.

  • I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

    I'm going back to cs4 after using cs6 and I can't open nef files in camera raw.

    Each camera needs a specific camera raw version (ACR).  And each ACR is tied to a specific version of PS.  See this list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

  • Second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

    second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up           
    . Place the iOS device in Recovery Mode if necessary to allow the restore.
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • HT4559 I have iOS 5.1.1 and I can't work message.

    I have iOS 5.1.1 and I can't work message.

    It's hard to diagnose without seeing what you've done.  Check out this link and see if you find a solution to your issue.
    http://support.apple.com/kb/TS2755

  • Since downloading Maverick I have a long hang time, computer crashes, can't use word and I can't access finder, why?

    Since downloading Maverick I have a long hang time, computer crashes, can't use word and I can't access finder, why? Also, iTunes is horrible. While I'm listening to my music iTunes will just stop playing the song for at least 5 minutes and I can't force quit why does it do that? This is the first time I have ever felt like my iMac is just as bad as a PC and I wonder if Steve Jobs would have let the program be relase to the public with all the problems involved. No wonder Maverick was free. IT ***** BIG TIME!

    Hello, vanvu. 
    Thank you for visiting Apple Support Communities. 
    Since you are experiencing this issue with both a wired and wireless connection only on your home network and not at other locations, this issue would related to your router.  I would first recommend power cycling the router and testing the connection again.  If the issue persists, try updating your routers settings per the article below. 
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/ht4199
    Cheers,
    Jason H. 

  • Using ios8 and I can't update apps nor download podcasts? Have tried all noted solutions, except sync to desktop or reinstall. Is anyone having these issues?p

    Using ios8 and I can't update apps nor download podcasts? Have tried all noted solutions, except sync to desktop or reinstall. Is anyone having these issues?p

    updated ipad to IOS8,plus itunes 12.0.1,now when click on itunes-devices-   no  apps, magazines etc are visible except music,movies etc
    what have they done?

  • If I try sending message to someone it will only let respond to their message but if I use their email after I type the message the send button is not highlighted and says incorrect email but it is the email the person the message from?

    I can only respond to messages.  I only can send messages to a persons iPhone but when I try to send to their iPad it says incorrect email for said person but it the email they used when messaging me?

    Read this thread, it's a bug that many are experiencing:
    Cannot send emails from contacts

  • Help. Trying use imessage and keep getting an error message that says the person is not registered with imessage

    I am trying to use imessage and everyone I am trying to send to I keep getting a message that they are not registered with imessage. They all have iphones and I know for a fact they are all registered. I have tried all the trouble shooting steps I have found so far. I made sure my imessage is turned on and set under my apple id and email, I'm connected to wifi. etc... I can use facetime but can not message anyone. Thanks in advance for you help

    Hi, reagans3.
    Thank you for visiting Apple Support Communities.
    I see you are experiencing issues with iMessage.  I am not sure what troubleshooting steps that you have processed; however, there are some additional steps in the article below that may help.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Cheers,
    Jason H.

  • Only one person can't receive messages I send with my Macbook Pro

    For a while, I've been able to send messages to a friend of mine (who is using an iPhone) with the Messages app on my Macbook Pro, but all of a sudden she couldn't receive any messages I sent her, although I could receive messages she sent to me. We can both send and receive messages to other people we message, but for some reason she can't see what I send. Note that the Messages app says the messages have been delivered, but for some reason she isn't actually getting them. Why is this? and how can we fix the problem? Thanks.

    Hello wikiwikisu,
    Thanks for visiting Apple Support Communities.
    If your friend is not receiving iMessages you send from your MacBook Pro, there are several troubleshooting steps that may help. You can find a good troubleshooting guide at this link:
    iOS: Troubleshooting Messages - Apple Support
    Since your friend cannot receive iMessages from you, but receives them from other contacts, I'd suggest they try these steps on their iPhone first:
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    All the best,
    Jeremy

  • Can receive text messages, cannot send

    New S4, activated earlier this evening.  I can receive text messages, but whenever I send one I get an instant "failed" displayed.  Called persons that I attempted to text and they never received the text

        Let's get this resolved PlanoSteve! Please try powering off the device and remove/insert the sim card by following here http://vz.to/1bVxcea power on and test. Please share your results. Thank you.
    TominqueBo_VZW
    Follow us on Twitter @VZWSupport

  • What exactly is using data and how can i keep it from using data when im not using my phone?

    So i have an iphone 4 and i have used a lot of data this month(like almost 2GB) and i have barely touched my phone outside of wifi areas. I always shut down any apps that use data like youtube, funnypics, facebook, etc. but i do play some games during my breaks at work but they dont require data to play so to my knowledge those games arent using data(or are they?) i just need some help figuring out exactly what on my phone is using data all the time so i can turn it off. Is it icloud? Emails on auto update? Offline game apps(minecraft, sonic dash, the Mr. Series games?) Do all apps use data regardless? Somebody please answer me. And No im not buying a bigger data plan. 2GB is my limit but it seems as though i am hitting that easily with my iphone but the rest of my familyis usually miles away from 2GB and they all have Samsung Galaxy S4s.

    My first stop would be in Settings > Cellular if you are on iOS 7.  This has a lot of goodstuff. you can turn off cellular data as a who, see your current usage and even see which apps have used data and how much.  You can even turn off individual apps form using cellular data (restricting them to wifi only).
    I hope this helps!

Maybe you are looking for

  • Output Determination.

    Hi, SD Gurus, While preparing Out put for Invoice how we suggest a ABAPER to write a programme under the following conditions. 1.The Logo should come on  top left. 2.Only  name of the company should be beside logo. 3.Beneath logo the data should be c

  • How to define an itab based from a structure inside a class

    Hello Experts, How can I define an internal table based from a structure that is declared inside a class?I want to define it in the START-OF-SELECTION event. I'll create a scenario below: *       CLASS lcl_main DEFINITION CLASS lcl_main DEFINITION AB

  • Search one forum

    Search doesn't seem to be restricting itself to the forum I'm in. I searched it the iCal and AppStore forums for font size When I was in the AppStore forum I fleetingly saw a result for iCal font size. Yet when I search in iCal forum for that thread,

  • Best way to use Models

    Hello, What is the best practice when using models? Given a scenario like, 1 project has several components. Each component has its view, windows, etc, since the components are separated by functionality. Is it better to create a model, then add that

  • Mail losing account info between shutdown/restart

    keeps asking to put info on keychain. misplacing incoming mail. Modem working fine on Safari and Netscape. If I have a virus or corruption, how can I flush and restore? I already had a copy of my 10.2.8 OS update and ran that but no help.