Using N95's GPS with navigation software installed...

Good Day,
Is it possible to connect the phone to a Laptop in such a way that the GPS signal will be transmitted to the navigation software installed on the Laptop?
Tnx.

Hi hanoch1hendel
Unfortunately that is not possible and there is no comparison between performance of the internal Texas Instruments GPS5300 NaviLink 4.0 chip in N95 due to it's antenna placing with an external SIRF StarIII receiver.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

SCCM 2012 Report that shows the users with specific software installed

Hi,
Is there a report in SCCM 2012 that shows the users with specific software installed? The report should show username, machine name and the software name. I am looking for a report that shows the users with the following softwares installed:
1. Adobe(all versions)
2. Photoshop(all versions)
3. MS Project(all versions)
4. MS Vision(all versions)
Regards, Lorin Davis

Take a look at the Asset Intelligence reports in the software section. You may get a list of computers with a product installed, and you might have to use that list to find the primary users based on user device affinity.

Using an external GPS with an iPhone 4S

For improved accuracy, I want to use an external GPS with my iPhone 4S. I have purchases a Dual XGPS150A Bluetooth GPS receiver and successfully paired it with the iPhone. Dual's "GPS Status Tool" app reports the GPS data from the device just fine. So now I want to get other apps like MotionX to use the GPS data from the XGPS150A in preference to the iPhone's own GPS.
Dual's technical support assures me this can only be done by putting the iPhone in Airplane Mode then re-enabling Bluetooth. Well that's a showstopper. However, in another post here, I found this statement from BrettAtBadElph: "As long as you are using an Apple-approved external GPS accessory like the Bad Elf, XGPS150, or GNS, you don't have to worry about configuring the GPS source being used. The iOS device will pick the source with the best accuracy, and shut down the internal receiver to save power."
Is BrettAtBadElph correct? If so, can anyone point me to some documentation?

I've received no responses, nor have I found any difinitive info elsewhere. But I can say that testing this weekend has made it clear that that BradAtBadElph is correct -- MotionX is clearly using the XGPS150A GPS data in favor of the iPhone's native GPS.
Funny aside: Dual's GPS Status Tool app is fairly weak -- it cannot dissplay any GPS data if another GPS-consuming app like MotionX or Waze is in memory.

Will a new iPhone 4 come with new software installed?

I just ordered a new iPhone 4. Not a 4S. Will it come with updated software? Or will I have to update it myself?

Yes... it will come with either 5.01 or 5.1 installed... most likely 5.1 as it's been out for several weeks.
Apple does not have huge warehouses of merchandise just sitting around, it's likely the new iPhone 4 you just purchased came off of a cargo ship or out of a cargo plane within the last month directly from the factory.

How to convert an ipod with Windows software installed to Mac operation

I have a 20MB ipod which has windows software on it. It is very hard to load songs onto as I can only see the ICON on the desktop and not in itunes and this way they don't seem to properly mount! I have a 12" ibook that I connect it to. I can't seem to follow how one is supposed to wipe the Windows OS (or whatever) off the ipod and install the Mac one ?!?!? Am I trying to do the impossible? A step-by-step answer would be soooooo appreciated.
12" ibook Mac OS X (10.4.2)

Information on the iPod not appearing in iTunes is available in this article. To reformat the iPod for Mac, open a new Finder window and click the Applications icon in the sidebar; from here, open Utilities and then iPod Software Updater. Locate the most recent version of the iPod updater inside, open it, and click the Restore button with the iPod connected. Doing this will change the iPod into the Mac format and erase everything currently on it.
(10717)

How to clean then sell with extra software installed?

I am trying to wipe clean my MacBook Pro, 2012. I have a couple of issues.
1) I bought it when Mountain Lion first came out. They gave it to me free upon purchase since they just hadn't upgraded yet. Is there going to be a problem wiping and reinstalling it at all, since technically I downloaded it with a coupon of some kind? I don't need to keep the license I would give it away with the computer.
2) I wanted to sell it with MS Office and Adobe pre installed. Is that possible?
Thanks!

Yes there is a problem. you will have to Reinstall Lion on that system. Even though Mt Lion was a Free Upgrade to you is was Still an Upgrade to the original OS X version that came on it and is Tied to YOUR Apple ID.
So Legally you can not transfer it to a new owner. And if you do they would not be able to Reinstall it without knowing your Apple ID.
To Revert the system back to Lion you must boot the computer from the Online Internet Recovry system, IE Boot the computer from over the internet from the Apple servers. To so that you hold down the Command+Option/Alt+r keys at startup and hold them down until you see a spinning globe in the center of the screen. It is best to have the system Wired to your internet router unless your Mac is WiFi only with no Ethernet port.
Once that system loads you Must Use Disk Utility to Re-Partition the drive as One partition so the Mt Lion recovery HD partition is removed.
Then once that is done exit DU and select Reinstall Mac OS X and Lion will be downloaded and install on the system.
The only caveat to all of this is the normally included iLife Apps are not a part of the OS. They are separate. So the new owner will need to Register that Mac with Apple under their name and Apple ID and then they will be able to download and install the iLfe Apps from the Mac App Store.
Once the OS has installed and the computer reboots to the setup screens just hold down the power button until the system turn off. Then when the new owner turns it on for the first time it will go through all the original setups of location and username and the like just like it was for you when you first took it out of the box.

Use Nexus Personal ("BankID") with Firefox without installing it

I will describe how to utilize Nexus Personal as a plugin for Firefox without installing the package from AUR or running the installation script that comes with the program.
And why would I do that? Firstly; the root partition on the system that I use has very limited space. If the files that are used for Nexus Personal are located elsewhere (like my home folder, on another harddrive) it will free up some valuable space. Secondly; to keep an record of the procedure. If I ever must repeat the process I can check back at this reference. Thirdly; upgrading should be trivial and just a matter of copying the new version of the program to a certain folder. Lastly; maybe someone else might also benefit from this.
Download and unpack the files and place the folder where you want the program to be (e.g. /home/kalle/Applications/nexus/)¹. Make sure that the files persadm and personal.bin have permission to be executed.
Let Firefox know where the plugin is located by creating a symbolic link in the Firefox plugins folder to the file libplugins.so by running the command sudo ln -s /home/kalle/Applications/nexus/libplugins.so /usr/lib/mozilla/plugins/libplugins.so
Copy the shell script² personal.sh to folder /usr/local/bin/ by running the command: sudo cp /home/kalle/Applications/nexus/personal.sh /usr/local/bin/personal.³
Now, open the copy with a text editor and change the two lines to point at the program folder (this should be obvious).
Make a symbolic link to the program folder in /usr/local/lib/ with the command: sudo ln -s /home/kalle/Applications/nexus/ /usr/local/lib/personal
Open the file /etc/ld.so.conf in a text editor and add a line with the path of the program folder⁴. Finally, run the command sudo ldconfig.⁵
Once you start Firefox the plugin should be recognized and operational (hopefully).
For those who don't know:
Nexus Personal, or "BankID", is a proprietary program that can be used as a method for personal identification, and is used on the websites of various Swedish authorities, banks, etc.
I'm not sure if this is the appropriate place to be writing this, but I couldn't think of any other.
Clarifications:
¹: where "kalle" should be your username. You can put the program folder with the extracted files wherever you want, though. /home/kalle/Applications/nexus/ is just a mere example.
²: located among the extracted files.
³: notice the slight difference in the name (the copy should not have an extension).
⁴: the line should contain just "/home/kalle/Applications/nexus/"
⁵: this seems to be required to do in order to make the plugin find its required libraries that comes with the program.
General tips for troubleshooting:
Invoking the command ldd can be used to check if the plugin executables has their required libraries set up correctly.
In Firefox you can also write about:plugins in the address bar in order to see if the browser is following the symbolic link that is located in /usr/lib/mozilla/plugins/.

http://portableapps.com/apps/internet/firefox_portable

Portege R500 - Shuts down with AuthenTec software installed

I have a problem with R500 (PPR50E-06W011PL). I bough it brand new Januar 4th, 2010.
Installed XP Pro and then all the drivers (lates versions available) in the order indicated in the manual. I have very quickly realized shutdown problems (sometimes with blue screen for less than second) when waking up from hibernation or even screensaver. It was in almost every second wake-up. After reading all the info I found on this forum I have decided to uninstall AuthenTec Fingerprint software. Since that time my R500 has never shutdowned itself and you should know I hibernate it few times each day. However, this is not a solution as the fingerprintreader software should operate correctly without causing OS problems.
Has anyone met such problem? If yes, has it been solved? How?

Hi buddy,
I also think your notebook is 100% ok and its just a software or configuration issue from your side. You wrote that on Windows 7 everything works fine What do you think about Windows 7, is it option for you?
The problem is that Windows XP is the past and therefore you will not get much updates anymore. Now everything will be tested and released for Windows 7 I think and its really good operating system.
So I hope Windows 7 is an option for you and it would be interesting to know if you have the same problems on preinstalled OS (Vista).
If you dont like Vista, disable the Vista designs. Then it looks like XP! :)

Need help with DM software install - installer thinks I have previous installation, but I don't

This is really frustrating me, but I recently uninstalled v4.3 and have been struggling to re-install ANY version of the DM onto my XP Pro machine. I have followed every bit of advice I can find including clean un-install / install, change the TEMP environment variable, unzip the installer and store locally, but I still can't figure this out.
I've been studying the installer log file, and I think this might be a clue:
InstallShield 14:12:58: Registering Msi Server...
MSI (c) (4C!DC) [14:12:58:742]: Note: 1: 2732 2: 0
InstallShield 14:12:58: Invoking script function RIM_CheckForDesktopDowngrade
RIM: Found existing DesktopMgr.exe at: C:\Program Files\Research In Motion\BlackBerry\DesktopMgr.exe
RIM: Failed to retrieve version info from: C:\Program Files\Research In Motion\BlackBerry\DesktopMgr.exe
InstallShield 14:12:58: CallScriptFunctionFromMsiCA() ends
MSI (c) (4C!DC) [14:12:58:774]: Leaked MSIHANDLE (55) of type 790531 for thread 3804
MSI (c) (4C!DC) [14:12:58:774]: Leaked MSIHANDLE (54) of type 790531 for thread 3804
Action ended 14:12:58: RIM_CheckForDesktopDowngrade. Return value 3.
MSI (c) (4C:40) [14:12:58:789]: Doing action: SetupCompleteError
Action 14:12:58: SetupCompleteError.
Action start 14:12:58: SetupCompleteError.
Info 2898.For Tahoma8 textstyle, the system created a 'Tahoma' font, in 0 character set.
Info 2898.For TahomaBold10 textstyle, the system created a 'Tahoma' font, in 0 character set.
Action 14:12:58: SetupCompleteError. Dialog created
It seems to think that I have a previous version installed in my Program Files, but no such executable exists (as I mentioned earlier, I have followed the clean install procedures more than once
Any ideas?
Message Edited by tbarcelo on 05-19-2009 02:21 PM
Solved!
Go to Solution.

Hi and Welcome to the Forums!
You say you followed the instructions for a clean install -- but what about a clean un-install? Those instructions are here...
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB02206&slic...
Edit -- oh...and reboots...lots of them...one between each step...after an uninstall...after an install...etc.
Message Edited by sdgardne on 05-19-2009 11:09 AM
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Different users with different Software installed

Hi there,
As I am rebuilding my computer and recovering my user through Time Machine, I suddenly thought about creating two separate users on my machine:
1.- Me: for my day to day usage.
2.- Developer: an account specifically targeted to install apps and/or test stuff.
In the second one I would like to be able to install apps I do not want accessible in the first and viceversa (I literally want to keep them perfectly separated so, in the case I want to rebuild my computer again, I can make a "clean restore" of user 1 while starting from scratch with user 2 to keep installing software and other testing situations.
The questions are:
A) Is this possible?
B) if so, how?
Thanks in advance

Thank you CT :-))
I do believe that would be a very feasible workaround. My fear (or my questions) goes into the following direction:
a) by doing so, are you keeping anything outside of that folder potentially affecting other programs (supposely, uninstalling apps in MacOS is clean, but there are so many apps to "completely uninstall applications" that I wonder if that is true).
b) I am looking for a programmatic solution (your solution definitely seems to be feasible, but I was looking for a system option or similar to make clear split among users within the same computer).
Thank you very much in any case :-))
Jose.

Problem with E71 software instalation

Hi! I have Nokia Suite and I wanted to update software for E71...but instalation stoped....Installation should reset phone but it is not.... Now when I turn phone on just screen turns grey and turn off (instalation not complete).Computer does not recognize it and if it is connected to the USB cable ....what to do.....please?

If nothing works from THIS resource..you need to take the device to Nokia Care ...

Using windows 8.1 with adobe software

Does anyone know if CS3 mastersuites will work with windows 8.1 operating system?

That version of the application is not supported on that operating system. CS3 software was developed many years before Windows 8 was available, so there is no way that they could have been tested together.

I can't get a book to play in iTunes. Ive had a mac before but Im using a new one with new software. The old one just fired right up.

I can't get a book to play on iTunes. New Mac purchase. The old Mac iTunes fired right up on music, books, etc. Where am I going wrong?

Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.

Software 02D - Computers with specific software installed - Help

Want to Add Username and if possible Displayname to this report can someone tell me how to modify this report to make this happen?

More info:
Create Custom Reports for ConfigMgr 2012 with Report Builder
http://www.scconfigmgr.com/category/reporting/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Kernal panic with software install and restore disc

I'm trying to access my software install and restore disc for my powerbook G4 running tiger. Everytime I restart the computer with the disc in, and hold down c, I get a kernal panic. There is nothing wrong with the software install and restore disc, as far as I can tell.
Thanks for any help!
Powerbook G4 Mac OS X (10.4.6)

is this a tiger disk or a previous operating system? if it is a previous os restore disk, then it is not surprising it would panic. the only software restore disks you would need would be ones to run the apple hardware test and to install or reinstall os 9. otherwise, you should not use a software restore disk for a previous operating system, unless you have erased and installed your drive. [ 8 ) ]

Using N95's GPS with navigation software installed...

Similar Messages

Maybe you are looking for