Using Name Server

Hi,
I'm trying to use a set of prefixes for software and development components. I made the following alterations:
- reserved a namespace at the SAP marketplace
- marked in the SLD that the System Landscape Directory has role 'Name server'
- made a list of prefixes in the SDL that should be used while creating SC's and DC's
What I expected is that while creating a DC a drop-down box should appeared from which I could select the required prefix. Unfortunately nothings happens and when I try to create a DC a error-message appears that the prefix of the name of the DC is not correct.
What did I forget?

Hi,
Have you defined the Namespace Prefix that you would be using ?
This can be done at SLD Home > Name Reservation (under Development) > Define Namespace Prefix (under Namespace Prefix)
Name Category: Development Component Name
Namespace Prefix: example.org/appl (in this example appl will appear in combo box)
Hope this solves the problem.
Regards,
Aayush

Similar Messages

Do we need to set up Name Server?

Hi all,
I am creating a Software Component in the SLD. During one of the steps, it request us to setup the Name Server. May I know what is the use for this name server? Can we do without the Name Server? And if we cannot, how do we configure the Name Server? And how do we know what type of name server to create?
Thanks in advance.
Regards

Hi,
You can leave it. It is used declaring it as the name server for the development infrastructure. In this case, the role of the server must be name server. The name server checks the uniqueness of names and enables you to define name prefixes. The name server is a role of a SLD. The other role is the landscape server role. The setup of the name server takes place in the same way as the setup of the SLD server.
So when you create your project in NWDS using NWDI track then the name will come as the prefix of the project. If you want to use name server you need to registerit. For more information see the note SAP Note 710315. Here is a link I think it will clear you enough.
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e9905fe1582d53e10000000a422035/content.htm
Thanks
Chandan

How to trace sevice names used in oracle names server

We are in process of cleaning up our oracle names server (9.2.0.6). In process, we found several fault entries (service names) which we are not sure of.. ( as it is a large nework) but we need to fix them. For ex. abc. world may be pointing to a db server orcl on server1, but we may need this to point to orcl on server2 and so on..
However, before making any changes on this names server, we want to be doubly sure of 'whether the service names are being used by anyone' (as this is the only names server supporting > 100 live db)? So, we want to trace the service names (and maybe the clients using them).. Is there a way out..?..
Metalink note 299149.1 shows a way to trace clients.. but there is no way I found to trace the service names being used or not.
kindly help.
Rgds
Jp

Select a button and look at properties. Check the option "Set Name From Link." You can select multiple buttons and do them at one go.

If I don't use a Name Server?

What happens if I can't or don't want to get a registered namespace prefix from SAP and so I don't define a Name Server in my landscape and I don't configure a Name Server in my DTR? Will this create problems when I use NWDI, for example, when I activate a new object?

Hi, I have a follow up question on the nameserver issue.
Please, if I develop one application on my JDI where the nameserver is activated and:
1) it's equal to the hostnane (and equal to the object server and Cms server too)
2)do not contain the / character
3) it's not equal or contain the string sap.com
The nameserver is NOT REGISTERED on SApnet.
Can I be sure my applycation will not overwritten by SAp software or from other registered packages ?
regards

Configuring TREX name server using j2ee visual administrator

hi all
i found the go.bat file in the following path in my system
/usr/sap/EEP/JC00/j2ee/admin/go.bat
now i want to run that "go.bat" but i don't know how to run this in linux machine but my portal server is installed in linux machine.so, can any one help me how to run that file in order to configure name server .
and also can any one tell me how to find out the server name and port number in order to fill the following format in name sererver
tcpip://<%nameserver%>:portnumber
plzz help me out
Thks&Rgds
Gnana

Hi,
/thread/77197 [original link is broken]
Regards
Prakash

PI 7.11: Cannot connect to server using message server:...

Hello Guys,
we make the Application Management for a Customer PI System.
Scenario:
- the SAP Gui Connection to the ABAP Stack is routed via SAPRouter and Works fine.
SAP Gui -> our SAP Router -> VPN Box from Customer -> Firewall Customer -> ABAP Stack PI System
- WebAccess its working fine, the Customer use Webdispatcher on every PI Server...
Browser -> VPN Box from Customer -> Firewall Customer -> Java Stack (Port: 5xx00 btw. 81xx (Webdispatcher))
Problem:
Our Problem ist, we can not proceed the Integration Builder or the ESB, the Java Web Start works fine and open the Logon Screen Correctly -> but i fill the Logon Screen with my User name and Password and press Logon come the follwing Error:
"Cannot connect to server using message server: ms://<hostname>.<domain>:8134/P4"
In the Details from the Error Message:
"<hostname>.<domain>:53404 Reason: com.sap.engine.services.rmi_p4.P4IOException:
Cannot open connection to host: <IP-Adress of Central Instance> and Port: 53404"
The Customer says, the Firewall is open with the IP Adresses and P4 Port but i dont think so...
Can everybody help me, or have tips for me! I have checked a lot of OSS Messages (PI High Availabilty etc... its all correct on the System)
Sorry for my bad English
Best Regards,
Markus

Hi Markus,
did you check if the browser is using a proxy? (In this case your scenario unfortunately won't work).
P4-port should generally be routed via a proxy (described in the help.sap.com), but within the PI-Tools(JNLP) the proxy-usage is not implemented. There is even a SAP-note that describes how to check the JavaWebStart-Proxyconfiguration, but this won't help either.
If there is a proxy defined in the browser everything is working fine till you pass the logon-screen but even with the correct "javaws"-settings you won't be able to go on.
(This problem is pretty bad if you do have developers and the SAP-servers seperated because of security issues. I'm hoping that this malfunction will be solved with upcoming patches.)
Solution: Establish a connection without any proxy in between.
E.g.: a terminal server in the same network
It would be helpful to find more people with the same problem to force a fix from SAP for that.
If anyone else is having problems with this, please add a comment to this thread.
Best regards
Christian

Cannot Send Messages Using the Server

I am dependent (during the day) on a wireless connection to the Minneapolis Wi-Fi system (U.S. Wireless).
I've got an e-mail account with comcast and I have successfully interfaced this with the Apple Mail application that came with OS X 10.5.4 and for many weeks have been happily sending and receiving e-mails. But....
I've been on the road and had to connect with Hotel internet services and I was picking up free WiFi in NYC when I was there.
I first noticed the problem when I was staying at a hotel in Vermont.
I would try to send e-mails and I would get the message:
CANNOT SEND MESSGE USING THE SERVER __________.
Select a different outgoing mail server....
Now, I am back home and using my U.S. Wireless connection (which has been really bad lately).
I keep getting these blasted messages and my mail sometimes goes through but more than often, I get these "cannot send message.." notices and my e-mail just sits there going nowhere in the outbox.
How can I solve this problem?

Beside the SMTP name -- smtp.comcast.net -- there is a pair of arrows, with one pointing up and one pointing down. If you click on those arrows you will be presented with a list of all SMTP ever enter (you may only have one), and also the command to Edit Server List. If you choose Edit Server List, you will be presented with a completely new setup window, dealing only with SMTP servers, and that window will have two tabs, one of which is also Advanced.
From the name, smtp.comcast.net, without your Username appended, would indicate that an Authentication of None is currently in effect. With changes that Comcast has made recently, whether you use Port 25 or Port 587, I believe you would have to use Password Authentication, most certainly if the latter Port 587 is chosen.
If you click on the link below, although not for Comcast, you will nevertheless see in section 12 through 15, screenshots that cover the SMTP setup that I am describing above.
http://wildblueworld.com/dishmail.net/howdoi-applemail.php#2
Ernie

DNS timeout and Name Server timeout between two DC's

Hi All
My clients have a brand new domain built for them, with two domain controllers at separate sites, and one site is having some issues.
At one site (where DC2 is hosted), all users are having 5-10 minute log on delays - once in everything is running without issues. Site where DC1 is has zero issues - they run smoothly, get a nice quick login etc. All users are using redirected folders and
all have the same GPO's applying to them.
DC1 also has periodic issues communicating with DC2 - nslookup using DC2 gives "DNS request timed out. timeout was 2 seconds" on external AND internal queries, but then 5 minutes later will resolve perfectly. During the "DNS time out"
period, trying to resolve DC2 as a Name Server also gives the error "A timeout occurred during validation".
Not sure if these (slow logon and DNS/NameServer time out issues) issues are related but I am at a loss.
Reverse lookup zones are fully created and populated, entries aren't randomly deleting themselves. Replication between both DC's is working fine, no errors and SYSVOL/NETLOGON are sharing fine from both DC's. Occassionally restarting the DNS server services
on both servers will kick them back into talking - but only for around 30sec-1minute, after that they communicate periodically without problems and spend the rest of the time not resolving.
Any ideas floating around, as I am at a loss here. We haven't been able to join more than a few test users to DC2's site for fear of them all calling every day due to long log on periods.

Hi,
Are you pointing each DC/DNS to the other one as primary dns in tcp/ip properties? Can you post a dcdiag /a /f:dcdiag.log from the DC2?
Any warnings/errors in Application log on the client(s) facing issues after they get logged in ? Can you also confirm that users from site with DC2 are having DC at : set | find /I "LOGONSERVER" output?
Hope it helps.
Regards,
Calin
Hi Calin
The DC's were originally pointing at each other for the primary but others prior to posting here suggested that was not best practice anymore and said they should be the other way around - in any case, either direction doesn't resolve the issues.
The only application error the users are getting is :
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
The winlogon notification subscriber <GPClient> took 84 second(s) to handle the notification event (Logon)
DCDIAG of DC2 :
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = CAB1-DC-V01
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: AUS\NDC1-DC-V01
Starting test: Connectivity
......................... NDC1-DC-V01 passed test Connectivity
Testing server: AUS\CAB1-DC-V01
Starting test: Connectivity
......................... CAB1-DC-V01 passed test Connectivity
Doing primary tests
Testing server: AUS\NDC1-DC-V01
Starting test: Advertising
......................... NDC1-DC-V01 passed test Advertising
Starting test: FrsEvent
......................... NDC1-DC-V01 passed test FrsEvent
Starting test: DFSREvent
......................... NDC1-DC-V01 passed test DFSREvent
Starting test: SysVolCheck
......................... NDC1-DC-V01 passed test SysVolCheck
Starting test: KccEvent
......................... NDC1-DC-V01 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... NDC1-DC-V01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... NDC1-DC-V01 passed test MachineAccount
Starting test: NCSecDesc
......................... NDC1-DC-V01 passed test NCSecDesc
Starting test: NetLogons
......................... NDC1-DC-V01 passed test NetLogons
Starting test: ObjectsReplicated
......................... NDC1-DC-V01 passed test ObjectsReplicated
Starting test: Replications
......................... NDC1-DC-V01 passed test Replications
Starting test: RidManager
......................... NDC1-DC-V01 passed test RidManager
Starting test: Services
......................... NDC1-DC-V01 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:25:05
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:25:05
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:25:05
Event String:
A pointer device reported a bad angular logical range.
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:25:06
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:25:06
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:25:06
Event String:
A pointer device reported a bad angular logical range.
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular logical range.
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular logical range.
A warning event occurred. EventID: 0x80000109
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device did not report a valid unit of angular measurement.
A warning event occurred. EventID: 0x80000101
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular physical range.
A warning event occurred. EventID: 0x80000102
Time Generated: 12/17/2014 08:47:55
Event String:
A pointer device reported a bad angular logical range.
......................... NDC1-DC-V01 failed test SystemLog
Starting test: VerifyReferences
......................... NDC1-DC-V01 passed test VerifyReferences
Testing server: AUS\CAB1-DC-V01
Starting test: Advertising
......................... CAB1-DC-V01 passed test Advertising
Starting test: FrsEvent
......................... CAB1-DC-V01 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... CAB1-DC-V01 passed test DFSREvent
Starting test: SysVolCheck
......................... CAB1-DC-V01 passed test SysVolCheck
Starting test: KccEvent
......................... CAB1-DC-V01 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... CAB1-DC-V01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... CAB1-DC-V01 passed test MachineAccount
Starting test: NCSecDesc
......................... CAB1-DC-V01 passed test NCSecDesc
Starting test: NetLogons
......................... CAB1-DC-V01 passed test NetLogons
Starting test: ObjectsReplicated
......................... CAB1-DC-V01 passed test ObjectsReplicated
Starting test: Replications
......................... CAB1-DC-V01 passed test Replications
Starting test: RidManager
......................... CAB1-DC-V01 passed test RidManager
Starting test: Services
......................... CAB1-DC-V01 passed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x0000272C
Time Generated: 12/17/2014 08:30:22
Event String:
DCOM was unable to communicate with the computer 139.130.4.4 using any of the configured protocols; requested by PID 1810 (C:\Windows\system32\dcdiag.exe).
An error event occurred. EventID: 0x0000272C
Time Generated: 12/17/2014 08:30:43
Event String:
DCOM was unable to communicate with the computer 203.50.2.71 using any of the configured protocols; requested by PID 1810 (C:\Windows\system32\dcdiag.exe).
An error event occurred. EventID: 0x0000272C
Time Generated: 12/17/2014 08:31:05
Event String:
DCOM was unable to communicate with the computer 8.8.4.4 using any of the configured protocols; requested by PID 1810 (C:\Windows\system32\dcdiag.exe).
An error event occurred. EventID: 0x0000272C
Time Generated: 12/17/2014 08:31:27
Event String:
DCOM was unable to communicate with the computer 8.8.8.8 using any of the configured protocols; requested by PID 1810 (C:\Windows\system32\dcdiag.exe).
......................... CAB1-DC-V01 failed test SystemLog
Starting test: VerifyReferences
......................... CAB1-DC-V01 passed test VerifyReferences
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : aus
Starting test: CheckSDRefDom
......................... aus passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... aus passed test CrossRefValidation
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running enterprise tests on : swms.com
Starting test: LocatorCheck
......................... swms.com passed test LocatorCheck
Starting test: Intersite
Doing intersite inbound replication test on site AUS:
......................... swms.com passed test Intersite
SYSVOL is sharing OK, these errors are occurring when DC1 is performing backups and comes good a few seconds later)
The DNS failures are not on the NIC of each server they are the forwarders for the server, not sure why they are failing as DNS lookup is running fine and the IP's are resolving correctly within the forwarders.
set | find /I "LOGONSERVER"
C:\Users\Christopher.McCartne>set | find /I "LOGONSERVER"
LOGONSERVER=\\NDC1-DC-V01
NDC1 = DC1
CAB1 = DC2
The users are logging onto NDC1 currently as I did switch around their DNS servers to have DC1 as their primary to test if this resolved the logon times. It didn't so I've switched them back and will re-run the check to see which server is the logonserver.

How to configure trex name server

hi all
while creating index i am getting the error
Index could not be created; creating index failed: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
for the above error i need to configure the trex name server using TREX Configuration in the J2EE Engine in j2ee visual administrator .
can any one tell me the clear path that where to configure the above and where j2ee visual administrator installed how to configure the name server
awaiting for replies
regards
ganesh

Hi Ganesh,
In order to access the Visual Administrator, go to Start > Programs > SAP J2EE Engine > Visual Administrator. After you login, you will see 2 nodes i.e. Dispatcher and Server. Expand the Server node. Then go to "Services" and expand it. Then go all the way down to "TREX Service". Then on the right hand side, go to the property "nameserver.address" where you will key in "tcpip://<nameserver>:<port>". Then hit "Update" and click on the "Save" button. Then when you go to TRex Monitor, you should be able to see the Name Server running. Hope this helps.
Thanks,
Sri
P.S Please rewards points if you find this helpful. Thanks.

How To Configure TREX Name Server&Port for UDDI Service Registry Settings

Hello Experts,
we are using CE 7.1 SP 4 and I would like to use the trex service in the Service Registry.
I use \NWA\Service Registry Configuration\Service Registry Settings\Keyword Search and want to test the TREX Communication using the Test Connection Button.
If I do so, I receive "Connection to TREX not successful".
When I press the Update TREX button I receive this exception:
com.sapportals.trex.TrexException: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
I tried to configure the trex.service with the two parameters: nameserver.address and nameserver.backupserverlist -> tcpip://myhostname.mydomain:30001 (Instance 00).
I am not sure if the port number is correct -> is there a way to lookup the correct port number?
Is there something else I should configure?
Thanks for help, best regards
Thomas

Hi Ganesh,
In order to access the Visual Administrator, go to Start > Programs > SAP J2EE Engine > Visual Administrator. After you login, you will see 2 nodes i.e. Dispatcher and Server. Expand the Server node. Then go to "Services" and expand it. Then go all the way down to "TREX Service". Then on the right hand side, go to the property "nameserver.address" where you will key in "tcpip://<nameserver>:<port>". Then hit "Update" and click on the "Save" button. Then when you go to TRex Monitor, you should be able to see the Name Server running. Hope this helps.
Thanks,
Sri
P.S Please rewards points if you find this helpful. Thanks.

How do i use itunes server with itunes match?

Hi all,
I am using itunes server on my synology NAS. On my desktop i've always used itunes with match. How can I combine the two? In other words, how can i use itunes match with itunes server?
thanx

I don't know if you've already solved it yourself, but I had this problem too. Try signing out of iTunes Store under 'Settings', then signing back in with JUST your iTunes user name, with no '.mac' or '.me' suffix. If, for example, your usual sign-in method is '[email protected]' try using 'joebloggs'.
Worked for me.

Trying to configure a Win 2003 Server to use TLS server authentication . . .

I am trying to
configure a Win 2003 Server to use TLS server authentication following Method 2 in KB 895443 - see below:-
Method 2: By using the Certificate Request Wizard
The following steps describe how to obtain a certificate from a Windows Server 2003 Certification Authority. You can also request a certificate from a Windows 2000
Certification Authority. Additionally, you must have Read permissions and Enroll permissions on the certificate template file to successfully request a certificate. Use this method if one or more of the following conditions are true:
You want to request a certificate from an Enterprise Certification Authority.
You want to request a certificate that is based on a template where the subject name is generated by Windows.
You want to obtain a certificate that does not require administrator approval before the certificate is issued.
To obtain a certificate, follow these steps:
Click Start, click Run, type mmc, and then click OK.
On the File menu, click Add/Remove Snap-in.
Click Add, click Certificates, and then click Add.
Click Computer account, and then click Next.
If you want to add a certificate to the local computer, click Local computer. If you want to add a certificate to a remote computer, click Another
computer, and then type the name of that remote computer in the Another computer box.
Click Finish.
In the Add Standalone Snap-in dialog box, click Close, and then click OK in the Add/Remove
Snap-in dialog box.
Under Console Root, click Certificates (Local Computer).
Note If you configured the Certificates MMC snap-in to manage a remote computer, click Certificates (servername)instead of Certificates (Local Computer).
On the View menu, click Options.
In the View Options dialog box, click Certificate purpose, and then click OK.
In the right pane, right-click Server Authentication, point to All Tasks, and then click Request New Certificate.
In the Certificate Request Wizard that starts, click Next.
In the Certificate types list, click Server Authentication, click to select the Advanced check box,
and then click Next.
In the Cryptographic Service Providers list, click Microsoft RSA SChannel Cryptographic Provider.
I get as far as step 11 and I get the error message:-
The wizard cannot be started because of one or more of the following conditions:
- There are no trusted certification authorities (CAs) available.
- You do not have the permissions to request certificates from the available CAs.
- The available CAs issue certificates for which you do not have permissions.
This is covered in KB 927066 – see below:-
To resolve the problem, follow these steps:
Verify that the CERTSVC_DCOM_ACCESS group exists in the domain that hosts the certification authority. This group is in the CN=Users container.
To do this, follow these steps:
Click Start, click Run,
type Dsa.msc, and then click OK.
In the left pane, click the Users container.
Verify that the CERTSVC_DCOM_ACCESS group is in the right
pane. If the CERTSVC_DCOM_ACCESS group is not in the right pane, go to step 4.
Verify that the CERTSVC_DCOM_ACCESS group includes the following member groups:
Domain Users
Domain Computers
If these member groups do not exist in the CERTSVC_DCOM_ACCESS group, go to step 4.
Note If users or computers in other domains need to enroll against the certification authority, you must also add those users and computers to the CERTSVC_DCOM_ACCESS group. If the current problem occurs on a domain
controller, you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group. By default, domain controllers are not members of the Domain Computers global group. Therefore, domain controllers
do not have sufficient DCOM permissions.
Verify that the CERTSVC_DCOM_ACCESS group has the appropriate DCOM Access permissions and DCOM Launch and Activation permissions on the computer that hosts the certification
authority.
Click Start, point to Program,
point to Administrative Tools, and then click Component Services.
Expand the Component Services node.
Expand the Computers node.
Right-click the My Computer node, and
then click Properties.
Click the COM Security tab.
Under Access Permission, click Edit
Limits.
Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Access and Allow
Remote Access permissions, and then click Cancel.
Under Launch and Activation Permissions, click Edit
Limits.
Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Activation and Allow
Remote Activationpermissions, and then click Cancel.
Click Cancel, and then close the Component
Services console.
Settings may be incorrect if any one of the following conditions is true:
The CERTSVC_DCOM_ACCESS group does not exist.
The default membership of the CERTSVC_DCOM_ACCESS group is incorrect.
The CERTSVC_DCOM_ACCESS group does not have the correct permissions.
If any one setting is incorrect, run the following commands at a command prompt. Press ENTER after each command.
certutil -setreg SetupStatus -SETUP_DCOM_SECURITY_UPDATED_FLAG
net stop certsvc
net start certsvc
Repeat steps 1 through 3 to verify that all the settings are correct.
Note If the changes affect the group membership of the certification authority server, you must restart the server for the changes to take effect.
The only part of the above instructions which I have not been able to complete is:-
“you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group”.
When I click on the CERTSVC_DCOM_ACCESS user then click the Members tab & go to add Enterprise Domain Controllers the option is not there.

Hi Nick,
Have you successfully set up an enterprise CA?
If yes, is the enterprise CA’s certificate located under the Trusted Root Certification Authorities store?
Best Regards,
Amy

Not able to access database from a remote machine using SQL Server Management Studio

Hi,
I have a DB_BOX with SQL Server 2008 R2 installed. I can access the databases on the local machine using SQL Server Management Studio but it is not accessible from other machines, though the machines are in same domain.
I have remote enabled on SQL Server box, TCP enabled, firewall off. I checked with IP Address too, all SQL Server services are running.
The SQL Server log shows the message
The requested service has been stopped or disabled and is unavailable at this time. The connection has been closed.
I get the below message in SSMS from remote machine.
Details of error message are
===================================
Cannot connect to DB_BOX.
===================================
A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=64&LinkId=20476
Server Name: DB_BOX
Error Number: 64
Severity: 20
State: 0
Program Location:
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
   at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
   at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
   at System.Data.SqlClient.TdsParserStateObject.ReadByte()
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
   at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
   at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
   at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
   at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.SqlClient.SqlConnection.Open()
   at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
   at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()

Sorry, missed the message from the errorlog in the original post. You shouldn't have included that big .Net dump that hid the important facts. :-)
My first Google attempt on that message (which I have never seen before) suggests that the TCP Enpoint is stopped, so try this:
ALTER ENDPOINT [TSQL Default TCP]
STATE=STARTED;
Erland Sommarskog, SQL Server MVP, [email protected]
This solves the problem. Thanks...

Flat file connection: The file name "\server\share\path\file.txt" specified in the connection was not valid

I'm trying to execute a SSIS package via SQL agent with a flat file source - however it fails with Code: 0xC001401E The file name "\server\share\path\file.txt" specified in the connection was not valid.
It appears that the problem is with the rights of the user that's running the package (it's a proxy account). If I use a higher-privelege account (domain admin) to run the package it completes successfully. But this is not a long-term solution, and I can't
see a reason why the user doesn't have rights to the file. The effective permissions of the file and parent folder both give the user full control. The user has full control over the share as well. The user can access the file (copy, etc) outside the SSIS
package.
Running the package manually via DTExec gives me the same error - I've tried 32 and 64bit versions with the same result. But running as a domain admin works correctly every time.
I feel like I've been beating my head against a brick wall on this one... Is there some sort of magic permissions, file or otherwise, that are required to use a flat file target in an SSIS package?

Hi Rossco150,
I have tried to reproduce the issue in my test environment (Windows Server 2012 R2 + SQL Server 2008 R2), however, everything goes well with the permission settings as you mentioned. In my test, the permissions of the folders are set as follows:
\\ServerName\Temp --- Read
\\ServerName\Temp\Source --- No access
\\ServerName\Temp\Source\Flat Files --- Full control
I suspect that your permission settings on the folders are not absolutely as you said above. Could you double check the permission settings on each level of the folder hierarchy? In addition, check the “Execute as user” information from job history to make
sure the job was running in the proxy security context indeed. Which version of SSIS are you using? If possible, I suggest that you install the latest Service Pack for you SQL Server or even install the latest CU patch.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Out of memory using Windows Server 2003 and Oracle 9.2.0.3

Hi,
I just installed both Windows Server 2003 and Oracle 9.2.0.3. The server I am using has 4 gigabytes of memory installed, and windows shows that to be the actual physical memory on the server. The paging file is 8 gigabytes for a total of 12 gigabytes of virtual memory.
Using the Oracle Database Configuration Assistant, I create a new database using default values. After verifying the installation worked OK (database started, queries ran), I attempted to change some of the memory parameters and was able to start the database using about 1.4 gigabytes of total SGA, with the O/S using about .3 gigabytes for a total of 1.7 gigabytes. I then attempted to change the buffer cache + 1 gigabyte for a total of 2 gigabytes. Now the database will not start and I get an out of memory error ora-27102 with an additional O/S memory error of "O/S Error: (OS 8) Not enough storage is available to process this command".
So, I have two problems:
1) With 4 gigabytes installed, and the O/S using only about 300 megabytes, why isn't Oracle able to take advantage of the memory on this machine past the 1.7 gigabytes (as reported by Windows task manager).
2) How do I change the spfile memory parameters so the database will start using spfile? I can start the database pointing to a pfile with lesser memory parameters, but I don't know how to effect change on the spfile, since I cannot start with the spfile.
Both these technologies (9.2.0.3 and Server 2003) are new to me, so any insight would be appreciated!
HERE ARE THE SPFILE PARAMETERS THAT WORKED:
SGA (M)
Shared Pool=104
Buffer Cache=960 ***
Large Pool=0
Java Pool=64
Total SGA=1128
SGA Max Size=1321
Aggregate PGA Target=1500
Current PGA Allocated=22868KB
WINDOWS MEMORY INFO FROM TASK MANAGER SHOW:
PF Usage=1.66GB
Physical Memory (K)
Total=4062704
Available=3203460
System Cache=2499096
Commit Charge (K)
Total=1748184
Limit=12288628
Peak=1925276
*** When I change this to 2048 the database did not start.
Thank you.

CREATE SPFILE
Purpose
Use the CREATE SPFILE statement to create a server parameter file from a client-side initialization parameter file. Server parameter files are binary files that exist only on the server and are called from client locations to start up the database.
Server parameter files let you make persistent changes to individual parameters. When you use a server parameter file, you can specify in an ALTER SYSTEM SET parameter statement that the new parameter value should be persistent. This means that the new value applies not only in the current instance, but also to any instances that are started up subsequently. Traditional client-side parameter files do not let you make persistent changes to parameter values. Because they are located on the server, these files allow for automatic database tuning by Oracle and for backup by Recovery Manager (RMAN).
To use a server parameter file when starting up the database, you must create it from a traditional text initialization parameter file using the CREATE SPFILE statement.
All instances in an Real Application Clusters environment must use the same server parameter file. However, when otherwise permitted, individual instances can have different settings of the same parameter within this one file. Instance-specific parameter definitions are specified as SID.parameter = value, where SID is the instance identifier.
The method of starting up the database with a server parameter file depends on whether you create a default or nondefault server parameter file. Please refer to "Creating a Server Parameter File: Examples" for examples of how to use server parameter files.
See Also:
CREATE PFILE for information on creating a regular text parameter file from a binary server parameter file
Oracle9i Database Administrator's Guide for information on pre-Oracle9i initialization parameter files and Oracle9i server parameter files
Oracle9i Real Application Clusters Administration for information on using server parameter files in a Real Application Clusters environment
Prerequisites
You must have the SYSDBA or the SYSOPER system privilege to execute this statement. You can execute this statement before or after instance startup. However, if you have already started an instance using spfile_name, you cannot specify the same spfile_name in this statement.
Syntax
create_spfile::=
Text description of create_spfile
Semantics
spfile_name
This clause lets you specify a name for the server parameter file you are creating.
If you do not specify spfile_name, Oracle uses the platform-specific default server parameter filename. If spfile_name already exists on the server, this statement will overwrite it. When using a default server parameter file, you start up the database without referring to the file by name.
If you do specify spfile_name, you are creating a nondefault server parameter file. In this case, to start up the database, you must first create a single-line traditional parameter file that points to the server parameter file, and then name the single-line file in your STARTUP command.
See Also:
"Creating a Server Parameter File: Examples" for information on starting up the database with default and nondefault server parameter files
Oracle9i Database Administrator's Guide for Windows (or other appropriate operating system specific documentation) for default parameter file names
pfile_name
Specify the traditional initialization parameter file from which you want to create a server parameter file.
If you specify pfile_name, the parameter file must reside on the server. If it does not reside in the default directory for parameter files on your operating system, you must specify the full path.
If you do not specify pfile_name, Oracle looks in the default directory for parameter files on your operating system for the default parameter filename, and uses that file. If that file does not exist in the expected directory, Oracle returns an error.
Note:
In a Real Application Clusters environment, you must first combine all instance parameter files into one file before specifying it in this statement to create a server parameter file. For information on accomplishing this step, see Oracle9i Real Application Clusters Setup and Configuration.
Examples
Creating a Server Parameter File: Examples
The following example creates a default server parameter file from a client initialization parameter file named t_init1.ora:
CREATE SPFILE
FROM PFILE = '$ORACLE_HOME/work/t_init1.ora';
Note:
Typically you will need to specify the full path and filename for parameter files on your operating system. Please refer to your Oracle operating system documentation for path information.
When you create a default server parameter file, you subsequently start up the database using that server parameter file by using the SQL*Plus command STARTUP without the PFILE parameter, as follows:
STARTUP
The following example creates a nondefault server parameter file s_params.ora from a client initialization file named t_init1.ora:
CREATE SPFILE = 's_params.ora'
FROM PFILE = '$ORACLE_HOME/work/t_init1.ora';
When you create a nondefault server parameter file, you subsequently start up the database by first creating a traditional parameter file containing the following single line:
spfile = 's_params.ora'
The name of this parameter file must comply with the naming conventions of your operating system. You then use the single-line parameter file in the STARTUP command. The following example shows how to start up the database, assuming that the single-line parameter file is named new_param.ora:
STARTUP PFILE=new_param.ora
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_616a.htm#SQLRF01315
Joel P�rez

Using Name Server

Similar Messages

Maybe you are looking for