Using nero and audi

hi
i used to have nero but replaced it with the audigy2 cause i had problems with nero.i might have used nero not correctly but i was wondering if i could have bothe nero and the audigy2 installed together o
my computer so i can have a little variety would they conflict or get along together.any ideas?if not ill
stick to sound blaster alone as it seems to be really good.
coonsanders

As per the other thread, I'm not sure why you think there would be some conflict with the two. I had an Audigy soundcard, and the Nero CD burning software, installed on the same PC without issue, as you'd expect.
I never used Creative's software for burning CDs though as Nero's software does all that I need, and more.

Similar Messages

  • I have always used Nero wav editor to add eq, add volume and noralize recordings....do I have that feature in premier elements? and if so, where do I find it?

    I have always used Nero wav editor to add eq, add volume and noralize recordings....do I have that feature in premier elements? and if so, where do I find it?

    Zillenwater said: You can export a FLIP video clip using Picasa 3, and then bring it into Premiere Elements. The video and audio will successfully come in.
    Thanks much - this worked very well and was so easy. After spending hours looking at a lot of different converters and getting nowhere, I spotted this solution.
    I used Flip avi files directly from the camera, copied them into a folder that Picasa 3 could find, and then exported them. They showed up in my /My Documents/My Pictures/Picasa/Exported Videos folder as Windows Media Files (.wmv). I brought my test files into Premiere Pro 1.5, previewed them, placed them in the timeline and rendered them. they looked good here, so I exported my movie and the video looks pretty good, considering it was from the Flip.
    Picasa did something that a dozen other conversion programs couldn't get right (or at least I couldn't find the right combination of codecs and settings). It's a relief, alright, and information I'm happy to share.

  • MSI 8348 Not recongnized anymore in NERO and CDRWIN??

    Hi,
    I got an MSI 8348 about 2 months ago, and it has been working fine until last week.  At first the computer could see the CDROM (8348), but not read from it and same day (earlier), my son said he couldnt burn a CD, that Nero wouldnt recongnize the CDROm in my computer.  Thats when I seen the PC wasnt seeing it.
    Well, I went to CP and system and deleted the CDRW and restarted the PC.  BIOS recongnized it and no the PC sees it and I can read from it, but nothing sees it as a burner anymore.
    I tried re installing Nero, and also tried WINCDR, and niether see it as a burner??   BIOS and Control panel System both ID it as a CDRW...
    I am have Win ME, and like I said it burned for like 1/34 months and just like that...
    Any help would be greatly appreicated!!
    Curt

    hi im having the same sort of problem nero sees it as just a 12x burner it never used to, when i first installed it read at 40x then couple weeks later at 32x  and now the burn speed is at about 12x   X(

  • Cannot write anything to discs using Nero 2014 on Qosmio G50

    HI THERE,
    I am having trouble burning things to disc ?
    I have no idea why, as a few months ago i had no troubles.
    I have recently done a complete re install of my Qosmio, changing the OP from 32 bit to 64 bit.
    I have convert x to dvd but will not burn using it, and i have nero 2014 but again, i cannot burn anything .
    Would appreciate any help ......
    thank you.....

    > i went into toshiba qosmio G50 drivers downloads page and clicked on the firmware update for TEAC . and after opening the download and starting it , it tells me that there is no DV-W28S-R drive found ?????
    This firmware update has been released for
    TEAC DVD Super Multi Drive (DV-W28S-RT3, DV-W28S-RT4): Version 7.0D and
    TEAC DVD Super Multi Drive(DV-W28S-RT1): Version 7.1D
    On the driver page (under More Info) you can find details about this update:
    _+Changes+_
    +- Fixed the issue that the ODD is not recognized if the system is booted from a certain CD in SATA AHCI mode.+
    This means that this update does not fix any data writing issues! Furthermore it has been published only for DV- DV-W28S-RT1, W28S-RT3, DV-W28S-RT4 model drives.
    Back to you disk writing issue:
    Try to delete the upper and lower filter following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    Details here:
    http://support.microsoft.com/kb/929461
    http://support.microsoft.com/kb/314060

  • Using NULL and NOT NULL in prompted filters

    Dear all,
    While trying to grap the concept of prompted filters in sap bo web intelligence, I had a question whether why we cannot use NULL and NOT NULL while creating a prompted filters in our report.

    HI,
    'Is Null' and 'Not Null' are the predefined functions in webi which only eliminate the null values or considering only null values.
    'Is Null' and 'Not Null' are itself predefined functions that why you are not getting  prompts.
    Null values are standard across the databases so this is defined  as a function in webi to specific eliminate the null values.
    If something is not standard then there is option in the webi to use different operator with static values or with prompts.
    More more information on Null see the Null wiki page.
    Null (SQL) - Wikipedia, the free encyclopedia
    Amit

  • How do I use Qt and OpenGL with Visual Studio

    Hi! I mainly want to program in C++ and I want to use Qt and OpenGL with Visual Studio.
    I am currently revising C++ and later on i am going to start reading Qt and OpenGL. I have a background of
    Embedded firmware design(C and Assembly).
    The Visual Studio Version I have is 2013 ultimate. How do I use Qt and OpenGL with Visual Studio?
    Thanks
    Alexandros

    Hi ClassicalGuitar,
    The forum supports VS setup and installation. And your issue is not about the forum. I will move the thread to off-topic forum. Thanks for your understanding.
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • Use VBA and Excel to open Dreamweaver HTML (CS5), find and replace text, save and close

    I wish to use VBA and Excel to programmatically open numbered Dreamweaver HTML (CS5) and find and replace text in the code view of these files, save and close them.
    I have  5000 associations between Find: x0001 and Replace: y0001 in an Excel sheet.
    I have the VBA written but do not know how to open, close and save the code view of the ####.html files. Please ... and thank you...
    [email protected]

    This is actually the code view of file ####.html that I wish to find and replace programmatically where #### is a four digit number cataloguing each painting.... In 1995 I thought this was clever... maybe not so clever now :>)) Thank you for whatever you can do Rob!
    !####.jpg!
    h2. "Name####"
    Oils on acrylic foundation commercial canvas - . xx X xx (inches) Started
    Back of the Painting In Progress </p> </body> </html>
    Warmest regards,
    Phil the Forecaster, http://philtheforecaster.blogspot.ca/ and http://phils-market.blogspot.ca/

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • TS3999 I had an icloud account setup in 2009 when I first got my family members each a mac. I let that account expire(we never used it) and I don't know how to get it off of my ical. It is not recognizing any of the information to reset the password?

    I had an icloud account in 2009. We set it up as a family plan because my family had just changed from PC to Mac. We never used it and let the plan expire in 2010. My ical will not sync with my new iphone because it is linked to the family plan account that no longer exist. Because I don't remember my password, I tried resetting it. It says the personal information I entered is incorrect, but I know the information is correct...It's my birthday it asks for! Does anyone know how to get that account off of my mac without the account existing?

    You were a MobileMe (not iCloud) subscriber in 2009 and this service has been terminated. However the login is an Apple ID and this never expires. What is your operating system? Do you have a MobileMe icon in System Preferences? - if so you should be able to sign out in it, but you may not have an iCloud icon to let you create an iCloud account, though you can do so if your iPhone has iOS 5 or above.
    If you are getting login requests or other irritations from your MobileMe account you can go to (user)/Library/Preferences/ByHost and delete all .plist files beginning with com.apple.DotMac or com.apple.idisk, then reboot.
    The minimum requirement for iCloud to let you sync your data is 10.7.5 though you can sync through iTunes (except with Mavericks).

  • Can I use classes and methods for a maintenance view events?

    Hello experts,
    Instead of perform/form, can I instead use classes and methods, etc for a given maintenance view event, lets say for example I want to use event '01' which is before saving records in the database. Help would be greatly appreciated. Thanks a lot guys!

    Hi viraylab,
    1. The architecture provided by maintenance view
       for using EVENTS and our own code inside it -
       It is provided using FORM/PERFORM
       concept only.
    2. At this stage,we cannot use classes.
    3. However, inside the FORM routine,
       we can write what ever we want.
       We can aswell use any abap code, including
       classes and methods.
      (But this classes and methods won't have any
       effect on the EVENT provided by maintenance view)
    regards,
    amit m.

  • Error while accessing a library using content and structure

    I have a library having document and folder inside it. When I open the library using content and structure I get an error with a correlation ID. When checked the the logs with Correlation ID got an error message "View 'All Document' does not exist."
    'All Document' is name of default view on the library.
    When I open the library from view all site content the library is being opened.
    Please help!!!

    Hello Victoria,
    Thanks for  the response.
    I have tried troubleshooting steps given by you. 
    Check if the issue occurs with other users. Use another user to access the library in Content and Structure and then compare the results. --
    I tried with different users but no luck
    Make sure that the user account with issue has permission to view the All Documents view of the library. --
    Yes, user Account have the permission
    Check if the issue occurs with other libraries in the Content and Structure. If not, I recommend to save the library as
    a template including contents and then create a new library based on this template. After that use the new library instead of the old library. --
    No other library have this problem. I cannot save the library as template including the contents as the it has many folders and  files. The current size of library is 786 MB
    Clear cache in the browser or use another browser to see if the issue still occurs. --
    tries but issue persists.
    Best regards,
    Ratnesh

  • How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?

    How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
    My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
         -I have a flashdrive with win7 on it.
         -I mounted the ISO of win7 with toast for bootcamp to do its thing.

    Good luck.
    Consider this a bump so that hopefully someone with better news spots your thread.
    Allan

  • Using iPhoto and editing with Photoshop Elements 4

    Hello
    I am new to Macs after many years using PC and I am struggling to set up my photo workflow. I shoot in RAW format and input into iPhoto from iPhoto I double click on the photo and which opens the RAW editor in Photoshop Elements. After making changes I open the file in Photoshop and then save as a TIFF.
    My problem is I do not see the changed and saved file in iPhoto and if I double click on the photo again it opens back up in the RAW editor not as a TIFF.
    Can any one point me in the right direction to solve this or is what I am trying to do not possible
    Thanks
    Grant

    Grant
    Welcome to the Apple Discussions.
    What you're trying to do is not possible.
    When you save as a TIFF you create a whole new file that needs to be imported into iPhoto anew. iPhoto will track an edit as long as you stay with the same file - so, edit your jpeg in PSE and use the 'Save' command and the change is reflected in iPhoto. However, you cannot Save RAW files, it's always a Save As... and so the resulting file has to be imported.
    Regards
    TD

  • Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possi

    Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possible?  Thanks

    Yes. Yes. Yes.
    Mylenium

  • Get "Creation Script" of the existing table ( in SQL database) using C# and without using SMO dlls

    Hi All,
    I need to get the "Creation Script" of the existing table using c# and without using SMO dlls (is it possible? I don't know).
    I.e. In SQL Management Studio -> right click on any table -> Script table as -> Create To  - > open in the new query editor window. This will give you the schema of the table with the constraints of the table.
    For E.g. In Northwind database, for the table "Categories", I would like to get it as show below
    USE [Northwind]
    GO
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    CREATE TABLE [dbo].[Categories](
        [CategoryID] [int] IDENTITY(1,1) NOT NULL,
        [CategoryName] [nvarchar](15) NOT NULL,
        [Description] [ntext] NULL,
        [Picture] [image] NULL,
     CONSTRAINT [PK_Categories] PRIMARY KEY CLUSTERED
        [CategoryID] ASC
    )WITH (PAD_INDEX  = OFF, STATISTICS_NORECOMPUTE  = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS  = ON, ALLOW_PAGE_LOCKS  = ON) ON [PRIMARY]
    ) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
    GO
    I would like to get the same schema using c#. Please help.
    Thanks & Regards,
    Kalai.

    SMO is the easiest way to get this. This is what Management Studio uses. If you can't use SMO, get a Profiler trace of the queries that SMO executes when generating the script and execute the same using ADO.NET.
    Regards,
    Farooq Mahmud
    Support Escalation Engineer 
    •  Microsoft Health Solutions Group

Maybe you are looking for