Using new 6th gen non with older mac

I have a powerpc g5 mac with 10.4.11 OS 1G ram. I got the new nano for christmas but I need itunes 10 to use it, I need 10.5 or greater OS to run itunes 10. Can I run 10.5 OS on my mac since it doesnt have the intel processor?
I have a friend who has a mac support service tell me that I couldn't but I think he is giving me BS since he doesn't want to give me the OS system I need (he has the new software for the the newer OS systems which allows him to distribute multiple copies of it)

You will probably be able to find retail copies of it via eBay or Amazon. Supposedly, Apple still has copies of it on hand as well, so it might not hurt to give them a call either if you are willing to go that route.
http://www.amazon.com/Mac-OS-Version-10-5-6-Leopard/dp/B000FK88JK
B-rock

Similar Messages

Extending an Airport Extreme (6th Gen) network with older Airport Express models

I just purchased the latest Airport Extreme (6th Gen) base station to be my main wifi router. I have two airport express models that I used in the past to extend my network with my (very) old retired Airport Extreme (2nd Gen): the 2nd Gen model A1264 (you plug into the wall directly) - I've had it for several years, and the newest 3rd Gen model A1362 (small square that lies on a desk or table) - I just purchaed a couple of months ago.
My question is - will extending my network with either of these Airport Express models diminish my overall network speed (Especially the older model)?
I don't have any AC capable clients yet - so everything is running on the "n" band - and the older Express is an "n" model, but I just have this (perhaps irrational) fear that attaching older routers will slow everything down.
Any thoughts or suggestions?
Thanks!

will extending my network with either of these Airport Express models diminish my overall network speed (Especially the older model)?
The A1264 model will be able to extend only one band of the new dual band AirPort Extreme. Normally, the A1264 will extend the 2.4 GHz band since it is stronger than the 5 GHz signal.
The A1392 will be able to extend both bands since it is also a dual band model, providing that it is located where it can receive a strong wireless signal from the new AirPort Extreme.
Here, I am assuming that you are asking about extending wirelessly.
You might want to keep in mind that extending wirelessly always involves compromises and loss of bandwidth. The main reason for this is that an extending device can only "extend" the quality of signal that it receives.
The wireless signal from the new AirPort Exterme will slow down and lose strength the further that it moves away from the main AirPort. So, the extending device gets a slower, weaker signal to extend. The result is signficantly slower wireless performance in the extended areas.
The way to solve this is connect the extending AirPorts to the main AirPort using a permanent wired Ethernet connection. There is no signal loss in a wire, so the extending AirPort receives a full bandwidth signal to broadcast. The result is higher and more uniform speed on the entire network.

No sound from JBL speaker/charger with new 6th gen nano

I just received my ipod original replacement with a 6th gen, but when I put it into my old JBL on stage speaker/charger It did nothing,
Will I need a new speaker/charger or do they make a adapter from the old original to the new 6th gen ?

All I need is fact.
The fact of the matter is you won't know unless you at least try it just as the previous poster suggested that you do!
If you are worried about damaging your iPod, post in the iPhone forum area, call Apple Care, iPod tech support and read the user manual for the proper equipment to use.
iPod nano Troubleshooting Assistant
iPod Troubleshooting Assistant
Service Answer Center - iPod
U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
iPod Manuals

I have a new mac book pro. i am using a usb not associated with my mac. when trying to download films onto the usb it keeps saying no space on it but its not full what can i do?

i've just bought a new macbook pro retina. i am using a usb not assocciated with this mac. when i try to download movies onto the usb it keeps coming back saying its full when i know there is plenty of space left. what can i do to correct this problem? do i need to buy a new usb? thanks

empty your trash
then open disk utility and reformat it
as mac journaled if you only want to use it for a mac
if you want to use it for both mac and PCs, select the partition tab, choose 1, format exfat and MBR under options
enjoy

CS6 compatibility with older macs (2007-2008), using Mavericks 10.9

I've heard about compatibility issues with older macs (2007-2008) when trying to run Adobe Creative Suite 6 Master Collection CS6 with Mavericks 10.9. Right now I'm using CS6 on my existing mid-2007, with Mountain Lion, -works great, and I'm worried if I upgrade to Mavericks there may be problems (based on FAQs)
I do lots of video editing/rendering and am looking into getting another back-up computer to speed up editing time. I'm looking at purchasing an older Apple Mac Pro Tower : 2008 : Xeon 8-core 2.8ghz : 16gb ram : 1TB hd. Will this run Adobe Creative Suite 6 Master Collection CS6 if I'm using Mavericks 10.9? If not, why?
Does the issue pertain to Mavericks with older macs, or is it CS6 with Mavericks, or what? Thanks!

Mac 10.9.3 and CS6 https://forums.adobe.com/thread/1480238 may help

I have the new 6th Gen Nano,AC charger?

Hello,
I have a new 6th gen Nano, and I usually charge it using the usb thru my pc, but I dont use my pc that often.
I still have my old ac charger (A1205) with an 5v output from my 1st gen iphone, can I use this charger for my new Nano? please advise.

All I need is fact.
The fact of the matter is you won't know unless you at least try it just as the previous poster suggested that you do!
If you are worried about damaging your iPod, post in the iPhone forum area, call Apple Care, iPod tech support and read the user manual for the proper equipment to use.
iPod nano Troubleshooting Assistant
iPod Troubleshooting Assistant
Service Answer Center - iPod
U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
iPod Manuals

I am not able to use my external hard drive with my Mac.

I am not able to use my external hard drive with my Mac. It was initially used with my Windows 7 laptop. Now when I insert my Hard drive in the Mac, it doesn't allow me to delete, format, make folders or copy new files on to my hard drive. I no longer have a Windows PC and am stuck. I tried going to Disc utilities,selected my HD, clicked on Erase and then changed the Format type to MS-DOS (FAT) but no luck .. Any other steps or advice?

It was likely formatted in NTFS which is readable by the Mac, but not writeable.
You should be able to reformat the disk in Disk Utility.
After having copied all the data off of it, you can try re-partitioning it.
Select the hard drive in the disk list in Disk Utility. Hard drives are the device itself, are left-aligned in the list, and are usually named with the manufacturer, size, and model number.
Click on the Partition tab.
Select 1-partition from the partition menu.
Click the Options button and set to GUID
Set the format to Mac OS Extended (Journaled)
Give the Volume a name and click Apply.

HT4623 Using a first gen iPad with iOS 5.1.1; why does it say my software is up to date when I try to update?

Using a first gen iPad with iOS 5.1.1; why does it say my software is up to date when I try to update?

Because the device isn't capable of running iOS 6 and newer.
(95617)

Can I use a Asus Nvidia gt640 with a mac pro 2006?

Just got my first intel mac! Not the newest thing but it will do. I just have a quick question, can I use the Nvidia gt640 2gb with a Mac pro 2006 with no flashing of the system or the card. Thank's. -Edward

First, you need to look at what OS version you have. Mnay people (myself included) running some of the newer OS version are using Nvidia cards not released for the Mac. OS X Mavericks for example will support these cards, but you lose some functionaility (boot screen, etc.) Once the machine is up and running they work fine.
With a 2006 model you are before the 3.1 machines and therefore limited in the OSX version you can run. I think you need at least 10.7 Lion.
So if you can run 10.7 the answer is probably, but then you will lose some basic functionality. For many this is not important.

I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?

I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?

First sentence in OPs question:
I use a two button mouse with my Mac Book Pro
I guess the track pad settings would look similar to my screen shot?
Regards,
Colin R.

I need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work? i use OS X

i need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work?

With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
So just go thru the motions of creating a proper printer instance:
Make sure the Mac "sees" the printer on the network.
System Preferences / Print & Scan
Click on the + button on the left column
Select the appropriate type of printer, will use IP for the rest of this
Select HP Jetdirect - Socket, default for HP network printers
Type the IP address or look it up
Name the printer for easy identification on the print dialog
Let the Mac identify the printer model or manually choose the driver
Click Add.
Once the instance pops up in the list, can click on Options & Supplies for further config.

I have been using Adobe Photoshop Elements on an older Mac...just bought Mac Mini and migrated all my files...but 4.0 Does not work....can I upgrade PSE 4.0 to PSE 13?

I have been using Adobe Photoshop Elements on an older Mac...just bought Mac Mini and migrated all my files...but 4.0 Does not work....can I upgrade PSE 4.0 to PSE 13?

Yes, any version of PSE qualifies for upgrade pricing, but if you're in the US you might want to consider running the trial for now and waiting for the black friday specials, when the full version will be a lot less than the adobe upgrade price.

How do i get the driver to use an HP laserjet 5mp with my Mac that runs Lion?

how do i get the driver to use an HP laserjet 5mp with my Mac that runs Lion? I'm told by HP to get it through Apple updates but it doesn't show up.

The term "server", while technically correct, is misleading. A print server takes the low-level protocol spoken by a printer and serves it over a higher-level protocol. For example, parallel printer port (a.k.a. Centronics or IEEE 1284) and serve it over USB. Or parallel or USB and serve it over Ethernet with a variety of printing protocols (lpr/lpd protocol, JetDirect protocol, port 9100 protocol, the names are confusing).
In reality, a print server looks nothing like what we usually associate with "server" (which is typically a biggish computer). Instead they usually look like adapter plugs or even adapter cables, or like a little network hub (just with printer connectors instead of network connectors).
Here are a few examples (I'll use Amazon as a guide book, without implying that I endorse them). Let's start with USB to parallel; it seems they tend to look like adapter cables. Here is one that takes a USB plug (male) and creates a female port that you can plug your regular old printer cable in: http://www.amazon.com/Cables-To-Go-16899-IEEE-1284/dp/B000UX21PY/ref=sr_1_1?ie=U TF8&qid=1333640548&sr=8-1
And here is one that goes from a USB plug directly into the printer: http://www.amazon.com/Parallel-Printer-Adapter-Connect-parallel/dp/B000BV8604/re f=sr_1_4?ie=UTF8&qid=1333640548&sr=8-4 replacing the old printer cable.
Then there are (really cheap) Ethernet to printer adapters. Here is one that you put into the printer (warning, the plastic cover will probably not fit afterwards): http://www.amazon.com/TP-Link-AC-TL-PS110P-Single-Parall/dp/B003CFATR4/ref=sr_1_ 11?s=electronics&ie=UTF8&qid=1333640755&sr=1-11 By the way, I really don't like this type, I always find them unreliable. But they are cheap.
The ones I like look more like a network hub. Here is the NetGear PS110: http://www.amazon.com/NETGEAR-PS110-parallel-Ethernet-100Base-TX/dp/B0002AF9JU/r ef=sr_1_2?ie=UTF8&qid=1333640860&sr=8-2
And the HP external JetDirect: http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/18972-18972-236253-34214-64302-273 16.html?dnr=1&jumpid=reg_r1002_usenc-001&lang=en&cc=us (I think this is the best one of the lot). Both of those you put next to the printer, use your existing parallel printer cable, and connect them to the network. Don't get scared by the astronomical price of the HP; it's commonly available used.
There are even some wireless models around. In theory, you might be able to use a parallel-to-USB adapter cable and then plug the USB cable into your trusty Apple Airport (as a good Apple fanboy or fangirl you've bought an Airport, right?), but I don't know whether that will work. With the HP JetDirect box I'm quite certain that it will work (but it's old-fashioned, doesn't come in white, doesn't do wireless, and is not the slightest bit hip or cool).

HT4628 I can not use the internal wireless card with my Mac pro 2012, I don't know if it is broken

I can not use the internal wireless card with my Mac pro 2012, I don't know if it is broken. The problem is happen recently, I have to use an independent wireless card now. Thanks!

When you enable Internet Sharing in OS X, you are creating a separate sub-net.
There is no option to allow this to be a simple pass-through from Ethernet to AirPort (or the other way).
The problem is easily solved by getting an inexpensive wireless router. You can replace your current router OR disable the DHCP server on the wireless router and allow the wireless clients to get an IP address from the current router.

I have just pard a new i phone 4s with my mac OSX,the calender is not paring its stay at aseting saying moving calender to server account.I have focet quet with now result it just stay the same

I have just pard a new i phone 4s with my mac OSX,the calender is not paring its stay at aseting saying moving calender to server account.I have focet quet with now result it just stay the same

I have just pard a new i phone 4s with my mac OSX,the calender is not paring its stay at aseting saying moving calender to server account.I have focet quet with now result it just stay the same

Using new 6th gen non with older mac

Similar Messages

Maybe you are looking for