Using New LabVIEW Merge Tool LVMerge With Tortoise SVN

Hi,
I've just posted a new blog article Using New LabVIEW Merge Tool LVMerge With Tortoise SVN to my blog at ExpressionFlow. Check it out!
Tomi
Tomi Maila

The LV merge tool really does become far more powerful when integrated into SVN than when used manually. Here's an article on Using LVmerge LabVIEW Merge Tool with TortoiseSVN with all the necessary setup instructions for LabView 8.5 and 8.6.
Jesse

Similar Messages

Bought and installing Logic X hope to use all my Pro Tools Stuff with Logic X to reduce the learning curve

Bought and installing Logic X hope to use all my Pro Tools Stuff with Logic X to reduce the learning curve for my Wife who is not very computer savy All her music is 96K and degitized with Pro Tools from analoge 16track tape.

mende1 wrote:
Welcome to Apple Support Communities
Apple offered a refund for users who purchased Logic Pro 9 30 days or less before the Logic Pro X launch, but they don't do it anymore, so if you want to upgrade to Logic Pro X, you have to purchase it in the Mac App Store
Part of this is incorrect...
Some App Store employee's "accidentally" (but in good faith) issued refunds to a few users who had purchased Logic 9 within 30 days prior to the mid-July release of Logic-X. Word quickly came down from Apple HQ that this was against App Store policy and the practice was immediately stopped.
To the original poster.. you never stood a chance, even if they were issuing refunds you didn't fall within the 30 day period. There were many who purchased Logic 9 a few days before the LX release who did not get a refund.

Use of LabVIEW Merge

Is there any use for using LabVIEW merge if your software team does not to parallel development? We are starting to setup Perforce for source control, and I was considering setting up LVMerge.exe to work with Perforce. However, since we have no parallel development, I don't see any point to this. Is there a reason that I'm overlooking to setup and use LVMerge when there is no parallel development?
Thanks!

Dennis Knutson wrote:
Consider a single developer making multiple changes. Merge is just not for different users. I've had to do a quick patch to fix a bug in source while at the same time, do more extended edits on the same source for new release with additional features.
Now that I think about it, I was confused how a single user would use LVMerge, because I don't really understand some of the differences between the arguments LVMerge uses. What is the difference between the Base VI and Your VI? According to the LabVIEW help, the Base VI is "Absolute path to a copy of the VI from where you checked it out (Base
VI)," and Your VI is "Absolute path to the VI you edited (Your VI)." Those seem like the same things to me. Isn't the VI I checked out the one that I am editing? Could someone clear that one up for me?
Also, I am confused about Their VI, which according to the LabVIEW help is, "Absolute path to a copy of the latest revision of the VI in source control
(Their VI)." MY source control is on a server. Do I use the server absolute path, like \\SERVER\SourceControl\Project\VI.vi to tell LVMerge where to get that VI?

Using the "Data Merge Tool"

Hi everyone,
I have a 2 questions about the data merge tool. I understand how to use a CSV file to replace dynamically any text I desire.
1. Can I use this same tool to replace pictures? Say, like if I create baseball cards for an entire team.
2. If I use it for creating business cards, but I only need to create ONE card at a time... I like how the "Records per document" option that optimizes the page size to fit as many as possible. Ok, to the question; How can I print one record at a time, multiple times (say 20 per page) and include art for the other side of the page (double side print, that does not contain variable data, just a background)? I just need to make sure the tool knows how to line the art up, so that when it is cut, the front and back art is aligned properly.
Thank you for your time.
Rafa.

Hi Lori
Many thanks the binding was set to 'none'.
Regards
Dave

Using New Apple 27" LED Display with old MacBook Pro (Late 2006) 15"

I've got a MacBook Pro (Model # A1211) Core2Duo 15" 2.16 GHz with only 128 MB of VRAM and a built-in DVI port (I think it is dual-link DVI)
My question is, will the new 27" LED Display work with this machine at its best resolution? If so, what adapter would I need to get it to work?
Thanks!

I don't think the Kanex adapter is the best one to purchase. The information on their website says it will only drive the 27" at 1280 x 720. Although I have not purchased one yet, the ATLONA website http://www.atlona.com/Atlona-Dual-Link-DVI-to-Mini-DisplayPort-Converter-USB-Pow ered.html, claims their Atlona AT-DP400 converter will drive the 27" at its highest resolution of 2560 x 1440. I have read confirmation from some users that this is the case for the DP400.

Using the Default standard Tool-bar with a new screen.

I created a screen with a table put would like the gui-status of the screen to be the same as that of a normal selection screen with all the functions. Is this possible and how do i go about it. Please help

hi ,
you can see the gui status of the any standard tool bar and copy the sane ..
but you need to add custom code in you zprogram for their functionality..
prabhudas

CANNOT OPEN RAW FILES USING NEW CANON EOS 1D MKIII WITH PHOTOSHOP ELEMENTS 5

Hi, I have recently taken a number of RAW shots with my new Canon EOS 1D MKIII and have found that I am unable to import them into Photoshop Elements version 5 (using Microsoft Windows). Comments generated are: "the file is a format that cannot be included in the organiser" and "cannot open because it is the wrong type of file". The RAW file extension is .CR2 and I have been able to open these type of files taken on my older, and much cheaper, Canon 350D. I have spent hours considering different options but to no effect and am completely baffled. Do the two cameras produce different types of RAW files? Notably, the files do import into the Canon software 'Digital Photo Professional' but I want to undertake the more versatile manipulation in Photoshop Elements. I have managed to become even more baffled about Digital Negative ('DNG') files and wonder if there is some kind of converter I need. Would the solution be to purchase a more advanced Photoshop package like CS2? OR .......... do I need an 'Adobe Camera RAW' update? I have struggled to find the latest version for Photoshop Elements 5 to suit my Canon EOS 1D MKIII. There appears to be a 4.3.1 update but this only applies to Version CS3. Help!

You probably haven't had anyone respond to your question because it has been asked and answered so many times. However, I will try once again.
Adobe Camera Raw must have a profile for every model of every camera for which it supports the camera's raw format. It is not a matter of just supporting a file type such as your CR2 files. ACR needs to know specifically what model you are using. This is a problem that has been created by the different camera makers. They are the ones who are creating these proprietary raw formats. No, they do not cooperate with Adobe. That is why Adobe has to wait for a camera to be available, then obtain a raw file from that camera, and then create the profile so that ACR will recognize that camera. That is also why ACR is updated about four times each year, to provide support for newly released cameras.
In an attempt to create a "common" raw file format, Adobe has developed the DNG (Digital negative) file format. Adobe is providing a free DNG converter. You always want to download and use the latest version of the DNG converter because it will be the one that supports the most cameras. The DNG converter creates a digital negative copy of your raw image. It contains all of the original raw image data. The image data is precisely the same data that was in the original raw image. The difference is that the DNG file has a "standardized" file header that stores as much of the metadata as possible about the image. Metadata is the information that records the changes that you make to your image when you edit it. Some of the image data is proprietary, and is therefore not available to Adobe. Obviously, that information simply has to be ignored by ACR. There are no XMP files associated with the DNG files. The information is stored within the DNG file itself so the XMP sidecar file is not necessary.
If you decide to go the DNG route you want to make sure you are using the latest version of the DNG converter. It will convert raw files from the largest number of cameras. Those DNG files can be opened by any version of Camera Raw from version 2.4 onward. Consequently, someone who is still using Photoshop CS still has the capability of working on their raw files even if they have the most recent up to date camera.
Photoshop Elements will utilize ACR 4.3.1 and any subsequent updates to the ACR 4.x releases. Judging from past experience, there should be another release soon. No one knows for sure. These releases are never announced ahead of time. ACR is not as robust in Photoshop Elements as it is in Photoshop CS3. It is the same plug-in, but a number of options are not available. It will support the same cameras, however.
You don't need to worry about matching the DNG converter version number to your working version of ACR. The only relationship is that matching version numbers will support the same set of cameras. But the DNG files that are created can be used in any version of ACR from 2.4 onward.
Anyone who is involved with digital photography and shooting raw has become a victim of the arrogance of the camera makers. The camera makers want to protect their proprietary format, and they want to promote the use of their software. Some of that software has to be purchased, so it is another way for them to make money. Until such time as everyone agrees on a common raw format, the photographers are the ones who are at the mercy of the camera makers. And there will be a continual ongoing updating process that we will have to wait for.

New Web Developer Tools interfere with my add-on

I use the add-on Menu Editor & have hidden the History & certain Tools. To access Menu Editor I simply press ctrl + shift + S Today however, a weird subscreen appeared at bottom of my browser. I figured out that under Tools there is an option for Web Developer (Debugger) that requires the same combination of keys to open. Now I cannot open Menu Editor at all. I tried to run in Safe Mode and could not get it to run in Safe Mode. I cannot access my add-ons at all because that is one button I have hidden.
How do I fix this? I don't care about Web Developer, don't know how to use it & most likely never will. I just want things to go back to the way they were before everyone starting messing around with firefox.

You might be able to switch one of them using the keyconfig extension from here: http://forums.mozillazine.org/viewtopic.php?t=72994
(Not helpful to you, but the NoScript extension also uses Ctrl+Shift +s and somehow it overrides the built-in debugger shortcut.)

Can I use our PC with existing SCXI setup (conencted to a PC by PCI-MIO-16E4) and use one labview application to communicate with FP and SCXI systems at the same time?

We have an existing PC with SCXI setup. can i plug in a PCI-485/2 card connected to a FP-1001 network, and get both systems to be utilized in a single labview VI?

Yes, you can utilize both sets of resources (SCXI and FieldPoint) at the same time from the same VI.
If you were using the SCXI RS-485 interface, the SCXI and FieldPoint system would have to be on separate serial ports. Beyond that, there should be no real restrictions on accessing both of them.
Regards,
Aaron

I used Instruments (Xcode developer tool) before with no issues but now getting error: "Target failed to run: Permission to debug com.cnn.iphone was denied.The app must be signed with a development identity (e.g. iOS Developer)". How to fix it?

I have used this tool before to analyze any application, such as CNN, in the past. But it is not working anymore and giving same error for all applications. Please advise.

The application (one wants to run instruments libraries on) has to be in running state and then select from the 'Running Applications' category and not from the 'Installed Apps' category and that should work.

Using new DJ function in iTunes with Apple TV

Ideally, wouldn't it be great to be able to stream the new DJ function in iTunes to an Apple TV which is wired into my home stereo systems? Then I would be able to control an entire house from my kitchen iMac. Now THAT would be a party! I am successfully streaming the library, but DJ doesn't show up in the playlists. Am I missing something?
Thanks for any help.
Carol

appletv shows up as "speakers" in itunes, you would just make your itunes DJ output direct to the appletv via airtunes.
this will do exactly what you want.

[BO 4.0 Client Tools] Problems with using Translation Manager

I have Installed SAP BO 4.0 with SP 2 on a Windows 2008 R2 Server with a MS SQL Server 2008 R2 as repository Server.
I have patched the Server with the SP4 for BO. I have installed the Client tools with the same Patchlevel (SP 4) on the same Server.
The Java - Installation is the Installation from SAP BO 4.0
Now I try to use the "Translation Management Tool"
Login with a BO - Administrator and Enterprise authentification.
Next Step ist to load an object from the repository.
This ends with an error Message: java.lang.Exception: initInstance failed. -2
And now? I have no idea.
Who can Help?
Ralph

Hello Mister Makmerphy,
it seems, that the higher memory limit solved the problem.
I made it in some steps and now I have a memory limit with 3 Gbyte.
And with a last step I've added the last 4 parameters.
But now I have the Problem:
"This server is considered failed because it has stopped 5 time(s) in 60 minute(s)."
And the actuall status is "failed"
Where can I reset this counter.
Waiting another hour to restart doesn't help
System Reboot doesn't help.
Where can I reset this counter or this timer.
Ralph

Sync used new iPad with iTunes w/o setting as new device or restoring

Hi,
few weeks after using new iPad that never synced with iTunes (backing up to iCloud), i want to sync iBooks and Aperture photos from iTunes library.
But, when i connect my iPad to iTunes using usb cable, there are only two choices: Set as new device or restore from older backup. I dont want to sync anything but iBooks and photos. What could i do?

Hmm, is Whitson's iPad the current name of the device, or an earlier iPad? Does that image you've shown occupy the entire iTunes window or is the usual column of library sources and playlists shown down the left-hand side. If the list is there then the iPad should appear as a device that you can right/option/cmd-click on. Failing that with all your purchases having come from the store you should be able to set up as new device and then reacquire all your store content but that would lose any data and settings. I suppose that after restoring as new, then backing up to the machine, you could then try restoring the backup from the cloud, and then if needed go through the original process as I suggested.
You might find that if you opt to set up as new nothing actually changes until you choose some content to sync, which may give you the opportunity to use the process I've previously outlined. Sorry I can't be clearer but I know that method has worked for a few people who have had to switch computers after a crash. I'm not personally familiar with the process under your precise circumstances.
The "cut the cord" feature which allowed you to set up the device without connecting to a computer is all well and good but if you have to go through this sort of effort when the time comes that you want to hook up your device to a library on your computer it becomes a complete nightmare.
tt2

Problems with syncing audio to video using merge tool

I ran into a new problem that I have not had.
The project was shot on 35mm and transfered to 1080p 23.97 10bit uncompressed. I took the file in to FCP and through media manager maid a copy of it to ProRes 422 HQ 1080p.
The Problem is when I broke the clips up for each scene and take (like I usually do) and set my IN on the clapper and my IN on the audio file for that take at the sound of the clap and go to merge clips on IN points. The clip merges but not at the points I told it to. The audio gets shifted down or up by a good few seconds.
Why is this happening?
When I take the footage with the same IN mark and put it on the time line and the Audio with he same IN mark and put it on the time line it matches up. But not when I merge clips. I cant think what Im doing wrong if anything since this is the first time I have had this issue.
Thanks to all!

I don't think FCE has a multi-cam function like FCP does ... so here's another way to do it (if it does have a multi-cam function, disregard this).
• Place the clip you'll likely to use most on track V1 (along with the audio on A1, A2).
• Place the other clip on V2 (audio on A3, A4).
• Double click one of the clips to load it into the Viewer window.
• Play the clip until you find a good sync point (either visually or audibly).
• Place a marker at that point.
• Double-click the other clip to load it into the Viewer and find the same point on that clip.
• Place a marker at that point.
• In the Timeline, line up the two clip markers - it will help to zoom in to make sure they're perfectly lined up.
• Once you have the two clips in sync, double-click the upper clip to load it back into the Viewer.
• Click on the Motion tab and use the Scale and Center controls to get a picture-in-picture effect.
• Back in the Timeline, unlink the audio and video from both clips.
• You can delete the audio clip that you don't want to use.
• In the Timeline, as you're going through the footage, cut out the parts of the clip on V2 that you don't want using the Blade tool.
• When you're done, select all clips remaining on V2, right-click on one and select "Remove Attributes" then choose Basic Motion (all clips will go back to full size and centered).
• If you want to consolidate all of V2's clips with the clip on V1, select all of V2's clips, then holding down the Shift key, drag the clips down to V1.
• At this point, you can use the Roll tool to tweak your edit points if needed.
• Add transitions as desired.
This will only work if both clips are continuous (camera did NOT start and stop during the take).
-DH

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

Using New LabVIEW Merge Tool LVMerge With Tortoise SVN

Similar Messages

Maybe you are looking for