Using nic nas and usb internet simultaneously

i use my nic card to connect to a nas. i use a usb device for internet.
both work simultaneously on my pc and worked on my older g4 which both were connected to a router and were able to also share pc-pc.
i now have a g5 (ppc) and cannot get the nic/nas and usb internet device to work at the same time.
I reassigned device order with ethernet ontop (worked on the g4) and it doesn't work. I have to constantly turn one device off and the other on and vice versa for which device i need to use at that time.
how can this be resolved please...it's very frustrating.
thanks.

The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
10.5.x/10.6.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712

Similar Messages

Using wifi streaming and USB transfer simultaneously

Hello I want to write files to this wireless stick from a PC connected via USB and at same time wireless stick is streaming another file to some other device. Is this use case scenario possible in this product ?Thanks

Hello, Yes this feature for now is possible when you connect the wireless tick to the pc via usb and then use a ios device to access it wirelessly and access the files with the app. Unfortunatelly it is not working while plugged on the usb port with an android device.

My itunes on windows7 pc does not recognize new ipad. using same cable and usb port that works for my ipod. what to do?

My itunes on windows7 pc does not recognize new ipad. using same cable and usb port that works for my ipod. what to do?
Thanks

Have you updated iTunes with the absolute latest software? If you have not in a long time, your iPad won't be recognized.

IPhone 4s. IOS 7.1.1 Windows 7. Using same lead and usb socket. From yesterday my phone won't appear on computer. Will charge via usb lead. Dont have iTunes on this computer and never had.

iPhone 4s. IOS 7.1.1 Windows 7. Using same lead and usb socket as always. From yesterday my phone won't appear on computer. Will charge via usb lead. Dont have iTunes on this computer and never had. Am now being asked if I trust this computer. This is new. Also takes longer than usual to signal it is charging. Get usual sound notification but nothing appear in computer. I long ago disables automatic notification that phone was connected. Prefer to bring it up manually.

Within Contacts, tap Groups at top left. Make sure all contact groups are checked to show, then tap "Done" at top right.
Within the Calendar app, tap Calendars at the bottom center of the screen. Tap on Show All Calendars.

Hi when i switch on the macc 41 files open at once can not open any files while this is happing can still use AI & PS and the internet any help thanks...

Hi when i switch on the macc 41 files open at once can not open any files while this is happing can still use AI & PS and the internet any help thanks...

Are you wanting to stop the 41 files from opening at once or is this intentional? At what point do they open when you power on the mac or when you boot Illustrator? What OS version are you using?
If you can answer the questions above can provide better advice, but you may be running into something similar:
http://www.mactip.net/stop-lion-restoring-previous-files-apps/

Using NIC Teaming and a virtual switch for Windows Server 2012 host networking and Hyper-V.

Using NIC Teaming and a virtual switch for Windows Server 2012 host networking!
http://www.youtube.com/watch?v=8mOuoIWzmdE
Hi thanks for reading. Now I may well have my terminology incorrect here so I will try to explain as best I can and apologies from the start.
It’s a bit of both Hyper-v and Server 2012R2.
I am setting up a lab with Server 2012 R2. I have several physical network cards that I have teamed called “HostSwitchTeam” from those I have made several Virtual Network Adaptors such as below
examples.
New-VMSwitch "MgmtSwitch" -MinimumBandwidthMode weight -NetAdaptername "HostSwitchTeam" -AllowManagement $false
Add-VMNetworkAdapter -ManagementOS -Name "Vswitch" -SwitchName "MgmtSwitch"
Add-VMNetworkAdapter -ManagementOS -Name "Cluster" -SwitchName "MgmtSwitch"
When I install Hyper-V and it comes to adding a virtual switch during installation it only shows the individual physical network cards and the
HostSwitchTeam for selection. When installed it shows the Microsoft Network Multiplexor Driver as the only option.
Is this correct or how does one use the Vswitch made above and incorporate into the Hyper-V so a weight can be put against it.
Still trying to get my head around Vswitches,VMNetworkadapters etc so somewhat confused as to the way forward at this time so I may have missed the plot altogether!
Any help would be much appreciated.
Paul
Paul Edwards

Hi P.J.E,
>>I have teams so a bit confused as to the adapter bindings and if the teams need to be added or just the vEthernet Nics?.
Nic 1,2
HostVMSwitchTeam
Nic 3,4,5
HostMgmtSwitchTeam
>>The adapter Binding settings are:
HostMgmtSwitchTeam
V-Curric
Nic 3
Nic 4
Nic 5
V-Livemigration
HostVMSwitch
Nic 1
Nic 2
V-iSCSI
V-HeartBeat
Based on my understanding of the description , "HostMgmtSwitchTeam and
HostVMSwitch " are teamed NIC .
You can think of them as two physical NICs (do not use NIC 1,2,3,4,5 any more , there are just two NICs "HostMgmtSwitchTeam and
HostVMSwitch").
V-Curric,
V-Livemigration , V-iSCSI ,
V-HeartBeat are just VNICs of host (you can change their name then check if the virtual switch name will be changed )
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Dual nic NAS and Jumbo Frame

I am posting this on the server area because I doubt I am going to get an answer anywhere else.
I have a linux based NAS running netatalk and avahi (afp server and bonjour) with two nics and I have a brand new Mac Pro with two NICS. What I want to do is run a crossover cable between the NAS and the Mac Pro in addition to both being plugged into the normal network. The normal network would have 1500 byte mtu so my internet performance and all of the various vintages of print servers work ok. The dedicated network would have jumbo frames. As we get more Mac Pros, we would add a switch and more machines to this secondary jumbo frame network.
That in theory should work fine (I have done it with other operating systems). My quandary is how to get the Mac to always connect to the NAS via the Jumbo nic and not through the other nic? The Mac learns of the server via Bonjour, so how do I tell it to prefer the "appearance" of the server on the jumbo NIC vs the appearance on the normal network. I know with WINS or DNS I can override the name resolution with a LMHOSTS or hosts file entry, can I do the same with Bonjour?
Thanks for any help or any pointers in the right direction!

I think you are misguided in your assumption that I am not intimately familiar with TCP and don't know what I am talking about.
TCP does not "negotiate" MSS, it advertises the MSS of each side to the remote in the 3 way handshake. It is perfectly acceptable to have asymetric MSS values. TCP does NOT NEGOTIATE a common MSS size. On a LAN, this will result in a functional communication. UDP however does not have such mechanisms and will fail.
TCP will also not function properly in the scnario of my local workstaion with jumbos enabled communicating with a distant endpoint that also has jumbos enabled across a transit network that does not support the maximum MSS used by one of the end stations. For giggles let's say the far end is FDDI and has 4k frame size. Our transit does not support frame sizes larger than the "natural" frame size of 576 bytes. We will use a 4k frame size from me to the remote and a 9k from the remote to me. If the remote sends to me it can use the full 4k MSS of token ring because its less than my MSS. In the reverse my workstation would send 4k frames back to the token ring station. Successful communication would then depend on path MTU and intermediary routers to send ICMP type 3 code 4 messages to signal back to our end stations to reduce our MSS (assuming the DF bit is set on our traffic or the transit router is incapable of fragmentation).
This is perhaps a bit of a flippant example in that nobody would be running FDDI or Token ring anymore, but random entities on the internet will run jumbo frame and perhaps some other l2 technology we aren't familiar with.
Did you ever deal with someone on a token ring segment trying to hit 3Com's web site when it was fddi or token ring? I have on several occasions. I also see this with VPNs all the time. Cisco's genius recomendation is to reduce your MSS on your server as some of their products don't support PMTU. I have had a Cisco <-> Juniper VPN where transfers worked one way because the Juniper would silently strip the DF bit from the packet and fragment it and the Cisco router (38xx) wouldn't do the same in the reverse direction. I also went through **** with the Nortel Contivity VPN devices while they sorted out what to do with the whole MTU negotiation issue.
I have spent many hours of my life pouring through sniffer captures because of mismatched MTUs. Let's not forget the old days of FDDI backbones with ethernet segments bridged across them and FDDI attached servers... mismatched buffers... no thanks.
I therefore don't want to waste my time troubleshooting some bizzare networking issue when there is a perfectly valid way of solving the issue for absolutely minimal expense. I am moving large files here (certainly large enough to get well out of TCP slow start), we easily saturate the full gig link minutes at a time and a saturated gigabit link at standard frame size is inefficient due to the interpacket gap which is locked at 96 bit times for ethernet and the 40 bytes of TCP/IP header plus whatever application payload is prepended per packet on each link. Cutting the number of TCP/IP headers and (probably more importantly since most decent nics do checksum offload these days) application layer headers also reduces load on both client and server.
On large sequential bulk data transfers jumbo frame effectively increases performance and reduces overhead. Period. I have implemented it from the early days of Alteon hardware in Sun servers through Juniper EX products last week. Every iSCSI implementation I run into is jumbo frame based for those exact reasons.
That being said, I don't need to restrict anything. All I want to do is to override bonjour/mDNS for this particular host such that the Pro always communicates over the jumbo segment. This is easily accomplished in windows with an LMHOST entry or in a unix environment with a HOSTS file entry. Is there some way to override bonjour from the client side? I'm ok even statically defining the services presented by bonjour on this host.
I am also willing to force all bonjour requests through a DNS server, however Apple doesn't have any decent documentation on how this is accomplished in an enterprise environment.

Unable to connect Officejet 6500 and Wireless internet simultaneously in Snow Leopard

Hi,
I am using Mac OS Snow Leopard and Officejet 6500. Before upgrading to Snow Leopard, I was able to connect both my printer and my wireless internet simultaneously (Leopard OS). However, after upgrading to Snow Leopard, I'm able to connect only one of them at a time which is really very inconvenient. Whenever I need to print, I need to manually select "hpsetup" from the Airport drop down and wait for it connect. This disconnects my internet. Then I need to select my wireless internet option in the Airport drop down again once I'm done with the printing.
This is defeating the entire purpose of a wireless printer. Guessing that its a problem with HP developing the required driver for Snow Leopard. I've already downloaded the driver meant for Snow Leopard but this is not solving the problem.
Also, would like to know whether its a problem with everyone or specific to me?

OK, great questions. I'll try to address them by number:
2. I do not think this is possible. I think your printer was initially connected to your router and has recently fallen off (thus broadcasting 'hpsetup'). Sorry, I am not saying you are lying, but I do not think it is possible without two radios.
3. a. Yes, you can only talk to one device at a time through your computer's wireless radio.
3. b. You can attach your printer wirelessly in case you need to move it, but....see "c" below.
3. c. I would recommend that you attach your printer via a wired connection (Ethernet cable) to your router if you can. It is by far easier to set up and more reliable in the long run. I can help.
The wired and wireless sides of a router talk to each other. By the time it gets to the router it really does not care if the connection is by wire or wireless, it treats all "clients" the same. That is why I recommend to wire your printer to your router and keep a wireless connection between your computer and router.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Inquiring about the issue of using PCI-5922 and PCI-5412 simultaneously under Linux OS! Thank you!

hi all,I am lily and I an AE from NI shanghai .Now I confronted a pullze from customer,and I really feel at a loss! Hope some one of you would come and land me a hand,thank you in advance!
The problem is as follows:
Customer use PCI-5922 and PCI -5412 under Linux OS, if they use either of the two cards seperately,there would be OK. but if the use both of the two cards simultaneously, the error will occured as attachment shows. "Error code:-50258 occured at niscope_DAQmx Create Channel (AI-Voltage-Base).vi:2 Possible reason(s):The specified software component failed to initialize."
Can I know is there any solution vs this probelm?Thank you in advance!!
Attachments:
Screenshot-NI-DAQmx Test Panels.png ‏17 KB
NI-NEW_error.txt ‏8 KB
shortsyms.txt ‏973 KB

This is the wrong board for this question, you should re-post here
Regards
Ray Farmer

Using old charger and USB cable with new 755

Just purchased a 755p from Verizon. I've used a Tungsten E2 for a long time and was wondering if I can use my old charger and USB cable with the 755p.
Post relates to: Treo 755p (Verizon)

They are compatible.
Post relates to: Palm TX

Airport and USB internet stick

Hi, is it possible to get my apple airport extreme router to work with an USB stick modem to be able to access the internet, and if yes how?
Thank you in advance!

Hi,
If you wish to use an AirPort Extreme base station (and its WAN Ethernet port) with a USB mobile broadband modem, a special adapter (something like this example) would be needed.
You could possibly find an alternative (temporary) solution through the Internet sharing capabilities of a Mac OS X computer.
Jan

How can I use web-console and element inspector simultaneously in Firefox 20+ as I could in Firefox 19-?

Yes, new web-developer all-in-one tools are total mess.
I didn't find the answer to this question either https://support.mozilla.org/en-US/questions/955612 but downgrade to Firefox 19.
But nor in Nightly, nor in Aurora, nor in Firefox Beta, nor in Firefox 20.0 I can use simultaneously web-console (where I test some style changing javascript code) and element inspector (where I instantly observe a reaction to my code). The only option I see is to switch every three seconds between them. How can I fix this except downgrading?

You can consider to use the DOM Inspector extension instead of the built-in Inspector.
*DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/

How can i deliver a single pulse of varying amplitude using Analog output and USB-6251?

I am trying to generate an analog output for the following waveform:
Pulse width: 300 usec, Frequency 40 Hz, Amplitude is following a sine wave with a 2 second period.
My approach is: Use an async timer with 1/[40 Hz] sec interval. I set the DAQ output rate at 1 MHz and the approach has been to generate and write 300 samples of the amplitude I need to send out, then wait for the next async interval callback , update amplitude etc etc. The assumption is that once the 300 samples are written and the task started , a 300 usec pulse would be sent out , task then stopped and then the analog output would be set to 0 waiting for he next pulse. The reality is that I get a stream of pulses of 300 usec which last the whole timer interval.
So , trying to establish whether what I am trying to do is feasible without actually sending a large array to the USB-6251 which would write zeros for the period after 300 usec.
Here is my timercallback code for review:
    switch (event)
        case EVENT_TIMER_TICK:
            DAQmxErrChk(DAQmxStopTask(TaskAnalog));
Determine Voltage value algorithm here
           //Generate Waveform and start Task
           //Prepare AO arr
           for (k=0;k<300;k++)
               AOArr[k] = 0;
               if (k<G_PulseWidth)
               AOArr[k] = VOLTAGE_OUTPUT;
           if (AOArr!=NULL)
               DAQmxErrChk(DAQmxWriteAnalogF64 (TaskAnalog, (int32) 300 , 0, DAQmx_Val_WaitInfinitely, DAQmx_Val_GroupByChannel , AOArr, &sampsPerChanWritten, NULL));
            DAQmxErrChk(DAQmxStartTask(TaskAnalog));
           break;
Thanks

I did resovle the issue I encountered. It was due to bad configuration of the Task.
My initial configuration was:
DAQmxErrChk(DAQmxCfgSampClkTiming(TaskAnalog, "",1.0E+06, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps , 300 * 1.0E+06));
which should be:
DAQmxErrChk(DAQmxCfgSampClkTiming(TaskAnalog, "",1.0E+06, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps , 300));
THis did it. works very well.
THanks

Print using both wireless and USB cable

Hello,
My officejet pro 8500 wireless is connected wirelessly to my LAN but my company blocks local access to printers while on VPN.
Only way I can print on local printers wirelessly is if I disconnect from VPN or if I somehow attach directly via USB. Can I just take a USB cable to the docking station and will my laptop recognize it or will it mess up the wireless setup. I like to use both options.

Yup, that is the nature of VPN.
You can run a USB to your docking station. You just have to have two instances of the printer in your list of printers - one for network and one for USB. Name them (right click > rename) something clever like ...Network and ...USB.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I am trying to transfer sound created on a Fantom X7 to my mac and garage band and have gotten so many different directions from others regarding the mode of connection - I am trying to use an interface and usb connection - anybody have advice?

Good morning!
I am trying to transfer sound from a FantomX7 keyboard synthesizer to garageband through an interface (MAudio) and with a usb cable. I see the image of the sound being recorded but I cannot hear anything - I know that there is a speaker button somewhere that must be muted - but I can't find it . Can anyone tell me what I am doing wrong. thanks, Musicmimi.

Good morning!
I am trying to transfer sound from a FantomX7 keyboard synthesizer to garageband through an interface (MAudio) and with a usb cable. I see the image of the sound being recorded but I cannot hear anything - I know that there is a speaker button somewhere that must be muted - but I can't find it . Can anyone tell me what I am doing wrong. thanks, Musicmimi.

Using nic nas and usb internet simultaneously

Similar Messages

Maybe you are looking for