Using ocm response file with opatch auto

I am going to be installing the psu 6 for 11.2.0.3 GI and database. In the patch set update readme file Oracle Grid Infrastructure Patch Set Update 11.2.0.3.6
(Includes Database PSU 11.2.0.3.6) - 16083653
It says that the ocm response file is not optional so I created the response file successfully.
My GI installation is owned by user id "grid" my database home is owned by user id "oracle".
Does it matter which user that I used to create the ocm response file? I was logged in as oracle when I ran ./emocmrsp -no_banner -output /home/oracle/config.rsp
I understand that I will invoke the opatch auto while logged in as root but just not sure if the response file is user environment specific?
Any suggestions appreciated.
Thanks.

Similar Messages

After installing latest update Realplayer recording no longer works, I think Mozila is using a library file with the same name

After installing the latest update to Firefox onto Vista operating system the record part of real player no longer works, I think Mozila and Real are using a library file with the same name and the Mozila update is overwriting a Realplayer library file.

I was giong to say, "Help me, Adobe Joe Kenobi", but it looks like you're growing a beard waiting for an answer, too.
The same thing happened to me today. I trusted the "update" message since it was from Adobe, and apprently did so at my own peril. Now I get the "failed to load Core dll" message with a secondary reference to a memory address.
Just an observation, but what good are these forums when there are no answers? I see this problem as "Caused by Adobe Update", and would expect them to troublshoot and offer up a remedy. Since you've been waiting over two months with no response, I suppose it's time to trek off wasting more of my precious time to fix their problem. If I find the solution, I'll post it back to you.
May the Force be with you.
Mark

Error when creating Oracle12c PDB using DBCA response file in silent mode

I am getting an Oracle dbca NullPointerException when trying to create a PDB (Pluggable Database) usingdbca response file in silent mode.
I have a Oracle 12c CDB up and running, listener is also up, $ORACLE_HOME and $ORACLE_SID are also set correctly.
After database install and creating CDB using response files, I am now trying to create a PDB using dbca response file. Contents of dbca.rsp -
[GENERAL]
RESPONSEFILE_VERSION = "12.1.0"
OPERATION_TYPE = "createPluggableDatabase"
[CREATEPLUGGABLEDATABASE]
SOURCEDB = "orcl"
PDBNAME = "dev"
CREATEPDBFROM = "DEFAULT"
PDBADMINUSERNAME = "oracle"
PDBADMINPASSWORD = "oracle"
CREATEUSERTABLESPACE = "true"
I tried following commands:
dbca -silent -responseFile /<file path>/dbca.rsp dbca -silent -createPluggableDatabase -responseFile /<file path>/dbca.rsp
Both give same error:
---- Begin output of /u01/app/oracle/product/12c/db_1/bin/dbca -silent -responseFile /<file path>/dbca.rsp
STDOUT:
STDERR: Exception in thread "main" java.lang.NullPointerException
at oracle.sysman.assistants.dbca.backend.CommandLineArguments.processResponseFile(CommandLineArguments.java:6885)
at oracle.sysman.assistants.dbca.backend.CommandLineArguments.process(CommandLineArguments.java:4544)
at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:110) at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:184)
However when I pass exact same parameters as command line arguments, dbca works absolutely fine and PDB is created: Following command runs succefully.
dbca -silent -createPluggableDatabase -sourceDB orcl -pdbName dev -createPDBFrom default -pdbAdminUserName oracle -pdbAdminPassword oracle -createUserTableSpace true
My environment need installation using response files only. I had used a dbca response file with "createDatabase" option for CDB and it worked fine. Error is observed only when I run it with OPERATION_TYPE as "createPluggableDatabase".
There is an option to create PDBs along with CDB creation when OPERATION_TYPE is "createDatabase". But Oracle does not give flexibility to name PDBs in this option. If I ask Oracle to create 3 PDBs, it will name them itself like PDB01, PDB02, PDB03 and so on. This doesn't work in my deployment because of applications compile time dependencies on specific PDB names.

Yes, I am pointing to correct response file. I have two of these. One for "createDatabase" and another one for "createPluggableDatabase".
While the first one works absolutely fine, the one which creates PDBs always gives error.
I tried renaming the response file like dbca_dev.rsp for PDB install but same error message. I read in another forum that rename dbca.rsp is not a good idea.
So I kept it as dbca.rsp but built it using PDB template.
When I try after removing -silent, it tries to launch a UI installer. Since I am in Amazon AWS platform, my instance is CentOS based which doesn't support Xwindows display.
I am stuck with -silent install only. When I try with -progressOnly, I get exactly same error.
Also tried removing some parameters but still get exact same error message.
Tried same trick with "createDatabase" response file, now I see parameters missing error message.
It seems like Oracle doesn't like response file install for "createPluggableDatabase".

Using .htc behaviour file with Business Catalyst server

Hi,
I want to use a .htc behaviour polyfill to add a functionality to old IEs. Is Business Catalyst able to handle that file extension? If not, can I use a .htaccess file with BC to add that extension as mentioned here:
https://github.com/Schepp/box-sizing-polyfill
Regards, Dennis

Some good javascript based sollutions been around for a while and got better and better that achieve all this so always used those but bother less and less now.
If your on Ie7/8 then you get square! your own fault, lol.
Never saw no reason for the htc file not to work but guess its not accepted on the server setup.

Can I use my Elements8 files with Elements11?

Can I Use my elements8 files with elements 11?

When you install PSE 11 it will convert your PSE 8 catalogue to PSE 11. Your PSE 8 catalogue will still be available to use with PSE 8. Once you have a PSE 11 catalogue allyour pictures will be pointed to by that catalogue and available. I think this answers your question, if not post back.

Installation of client 10.2.0 using a response file

Hello Everyone,
I have no clue if I'm posting in the right Community but I need some help installing the Oracle Client 10.2.0 silently on a Computer. Right now my response file was created using the setup.exe /record /destinationFile myPath but was missing the dependency i wanted to install. So I added at the end of the file
oracle.client:DEPENDENCY_LIST={"oracle.sqlplus:10.2.0.1.0","oracle.winprod:10.2.0.1.0"}
oracle.winprod:DEPENDENCY_LIST = {"oracle.winprod:10.2.0.1.0","oracle.oo4o:10.2.0.1.0","oracle.odbc:10.2.0.1.0","oracle.ntoledb:10.2.0.1.0"}
My dependency get installed but I keep getting these errors :
The procedure entry point GetProcessImageFileNameW could not be located in the dynamic link library PSAPI.DLL
That is were I'm stuck now.
Thank you for the help
UPDATE: More info I am installing Oracle 10.2.0 32bit on a Windows 7 x64
Edited by: 953742 on 2012-08-20 11:56

953742 wrote:
Then the fact that I need the patch isn't going to solve my problem. My problem is with the response file when I install the 10.2.0What 10.2.0.. Did you start from 10.2.0.4 or 10.2.0.1?
The (earlier) referenced instructions say "+For installations on Windows 7 and Windows Server 2008 R2, you must use the software specifically designated for these operating systems. ...+"
Unfortunately the OTN download link only lead to software removed message page.
Where do they keep "archived" or previous versions nowadays? I remeber they kept at least a few releases back available.
Maybe edelivery.oracle.com ? Only option I can think of, other than submitting SR for media to Metalink.

I have created a .m4v file from iPhoto and would like to share it with someone else knowing that the file is quiet large (86 Mo), i used to share file with mobileme, how Can I do that with iCloud ? or another way....

In iphoto, I have create a diaporama which I exported to itunes as a m4v file. I would like to share this file with someone but it is too big to send it via email (84 Mo). This file is now in my films in itunes. Is there a way to share it via icloud.
I used to share files using mobileme which I cannot use anymore.
Thanks for your help,
Eric

How recently did you switch? If it's less than 60 days, then Verizon simply reinstates your previous account. The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices. I'm not sure how it will go - but since you are still being billed for the devices...

Using a Pac File with the new Macbook Pros

I have recently purchased a new Macbook pro and to access the internet at my college, I need to use a Pac File, and My class mate has the drop down option to select it due to their macbook pro is an older model and my new macbook doesn't, how do I get the "Using Pac File" option?
Thanks people in advance for your help!

OS X Lion is not being included as an install DVD with new Macs. (It does come pre-installed.) Apple is offering a $69 USB stick with Lion pre-installed for owners would like to own a solid state means of recovery. Lion is strictly internet based with its recovery features - in other words - Macs will need to be able to connect to the internet to restore a computer with HDD failure (or some other issue where you need to restore the system.)

How to "use" a xml file with a script?

Hey Guys!
I use the normal Button with the send-option to send the xml file to an url.
My question is how it's possible to work in a php-script with the xml data out of the formular?
Thanks for help.
LG
Adrian

Hi,
I need to read a XML document with StringReade class.
My aplication receives an absolute path but this
doesn't work:
StringReader oStringReader =
new StringReader(c:\java\libros.xml);
However it works with:
StringReader oStringReader =
new StringReader("<?xml version="1.0" e......");
ie, with the whole document as a String, but I need
to do it as the frist way.
Thankstake a look at this link:
http://java.sun.com/webservices/jaxp/dist/1.1/docs/tutorial/sax/2a_echo.html

Gridworld Case Study - how to use a .jar file with textpad

Hello,
I am a student currently working on a project involving the Gridworld case study. While trying to work on my project at home, I discovered that I would get new "cannot find symbol" compiler errors that I had not previously gotten while compiling the same code at school. I am assuming this has something to do with the .jar file included in the gridworld code. How do I get textpad and/or the java compiler to find and use the .jar file and reccognise the classes which i am importing and extending in my project?
Thanks,
-Alex

Thanks, It works for compiler now.
Now, I write a html to run the applet. appletviewer
says "
java.lang.NoClassDefFoundError: ij/process/ImageProcessor
at java.lang.Class.getDeclaredConstructors0(Native Method)
at java.lang.Class.privateGetDeclaredConstructors(Class.java:1590)
at java.lang.Class.getConstructor0(Class.java:1762)
at java.lang.Class.newInstance0(Class.java:276)
at java.lang.Class.newInstance(Class.java:259)
at sun.applet.AppletPanel.createApplet(AppletPanel.java:566)
at sun.applet.AppletPanel.runLoader(AppletPanel.java:495)
at sun.applet.AppletPanel.run(AppletPanel.java:292)
at java.lang.Thread.run(Thread.java:536)
It seems the appletviewer can not find the right path for the package. How can I fix this?
Thank again,
Hillxy

Can I Collaborate Using Just PrPro Files with a Colleague in London?

Hello,
I am in the US and have a colleague in London. I would like to collaborate with her on the final edits to my film and on the conversion to DVD.
May I exchange PrPro files with her via YouSendIt or something like that? I'm worried that such a process may not include all the necessary "pointers".
Thanks for your help.
Matt Dubuque

Relink an offline clip
You can link an offline clip to a source file, even to a source file different from the one from which the offline clip was made. The linked source file appears anywhere the offline clip is used in a project. It is possible, for example, to edit an online clip in a sequence, make its source offline, and link the offline clip to another source file. The new source appears in the sequence wherever the original one did.
You can link offline clips to video files, audio files, and still-image files. However, you cannot link an offline clip to a still-image sequence different from its original source file. Instead, import new still-image sequences, and place them into timelines manually.
You can link an offline clip containing audio to a source file containing no audio. Premiere Pro deletes the audio track in all instances of the relinked clip from the project.
Note: To link the audio of a new source file, the source file must have the same type of audio track as the offline clip. For example, if the offline clip has a stereo audio track, you cannot link it to a source file with a monaural audio track.
In the Project panel, select one or more offline clips.
Choose Project > Link Media.
Select the source file, and click Select. Note: If you selected more than one offline clip, the Link Media To dialog box appears in turn for each clip you selected. The title bar of the dialog box gives the filename for each offline clip. Relink the correct source file to each offline clip. If all of the offline clips selected point to media in the same folder, the Link MediaTo dialog asks for the first file, then links the selected offline clips to all the files in the same folder as the file selected. If you link to a file from a different project, and if that project has the same folder structure and folder names as the first project, the Link Media To dialog box asks for the first file, and then links the selected offline clips to all the files in the other project.
(Optional) If you selected a source file containing no audio to link to an offline clip containing audio, the Media Mismatch dialog box appears. Do one of the following:
To delete the audio track from all instances of the offline clip from the project click OK.
To cancel linking to the source file, and retain the audio track in all instances of the offline clip, click Cancel.
In Premiere Pro CS5.5 and later, in the Project panel, you can choose Clip>Make Offline for any merged clip. When making any merged clip offline, all component clips will also be become offline. However, you can use the Relink command to link to the desired tracks, while leaving others offline.

Anyone tried using a QText file with FCP?

I was just wondering if there is some way to utilize a QText file for captioning with FCP, either directly of by importing it into QTPro, then exporting it in a form that FCP understands? The idea is to use these as timed text overlays.

QText is a bit more, at least to my limited understanding. Let's say you have a QText file with 10 lines of text you want to display. In the header you can specify color, size, etc. Before each line of text you enter a time code which represents the start time for displaying that line. For example:
[00:00:00]
This is my first line and displays for 4 seconds
[00:00:04]
This line is displayed 4 seconds after the first, and displays for 6 seconds
[00:00:10]
and this line is 6 seconds after the one above (i.e. 10 seconds in).
and so on. One way to look at it, each line of text becomes a slide which displays until the next line is called.
When fed to QTime, you get a very nice vector graphics display of each line at the specified time. It would be great if I could export that as a video file which I then could use in an overlay track in FCP. QTPro offers several export options including such as MP4, m4v, etc. Dragging these files into FCP either generates a Codec error when rendered or isn't recognized at all. I guess I could use a video screen capture program and capture the QTP display, but that seems like a crude and slow process. I had hoped, since FCP and QTP are both Apple products they would have found some way to integrate them. No mention of QText in the FCP help file, so it would appear no such luck.

Runtime.exec() - using cp and files with spaces on unix

I'm using the Runtime.exec method to copy files in a unix environment. This works fine until there is a file where the name has spaces in it. I've read the article on the pitfalls of using runtime and how it breaks a string on white spaces and this is what is happening. I've also found another topic that was having the same problem, but they were using /usr/bin/dos2unix. I've tried putting quotes around the filename, but it still breaks on the first space. Any suggestions on how to get around this or another way of doing this would be greatly appreciated.
An example of the os command string is:
/usr/bin/cp /tmp/file with space.doc /docs
Thanks!

Hi!
Well I dont have any Sun machine right here to try this but in windows It works great.
Have you tried something like this ?
import java.io.*;
public class OSCopy {
    public static void main(String[] args) {
        try {
            String space = " ";
            String copycmd = "E:\\cp.cmd";
            String source = "E:\\File with space.txt";
            String destination = "E:\\tmp";
            String cmd = copycmd + space + "\"" + source + "\"" + space + destination;
            System.out.println("cmd: " + cmd);
            Runtime runtime = Runtime.getRuntime();
            Process copy = runtime.exec( cmd );
            BufferedReader reader = new BufferedReader( new InputStreamReader( copy.getInputStream()) );
            String line = null;
            while( (line = reader.readLine()) != null ) {
                System.out.println( line );
        catch (Exception e) {
            e.printStackTrace();
cp.cmd is a simple dos copy command
copy %1 %2
*/good luck!

Using subtitle SRT files with FLV files

Pretty much the way the summary states. Needs to embed srt
files with flv files in actionscript. Anyone know how?

Ouw-wee! Photoshop 2 on System 6?
Do you have the files transferred to newer media or are they still on the System 6 Mac?
If they are still on the old Mac your options are limited, only diskettes worked on the old machines and SCSI hasn't been available on Macs in years..
Since Photoshop didn't have layers until PS 3.0, even if you get them open, they are single layers only.
Do you happen to know the file format they were saved as?
Good Luck!

Adobe 7, and opening a pdf file with a auto generated report

We have upgraded to the latest version of a tool we use to generate reports. The older version, when you exported the report to a PDF file, it would open it in an internet broswer, IE 6/7 in this case, and just display the PDF in the browser.
With the latest version of the reporting tool, when you export a report to a PDF file, it opens up a blank IE windows, and subsequently opens the autogenerated report in a separate Adobe Reader window, but it does not have the primary focus. It pop's under the blank IE window. This causes a lot of confusion to our employees who are not computer savvy as they are not aware the PDF actually opened since the window did not get primary focus on the screen.
The company which writes the tool for us says there are no changes to the way it auto generates the pdf file, and insists it has nothing to do with their software.
We decided to dig a little deeper and only found one difference between the old and the new software.
Old - Content-Type: application/pdf
New - Content-Type: application/pdf;charset=UTF-8
Would that command cause our problems? It almost seems at though Adobe 7 plugin in IE7 doesn't recognize the "charset=UTF-8" and dumps the pdf to the full Adobe reader.
If anybody has any insight, or would need some more info to help solve the problem just let me know.
Also, we have to stay with Adobe 7, since all 7000+ computer's this affects have identical images, and upgrading to a new version costs $$$$ and has to go through massive channels.

Welcome To  Discussions Kathy216!
If these are files, that are already on the Hard Drive, click once on a pdf document to highlight it.
Press the Command + I keys, to Get Info.
Click on the ▼ Disclosure Triangle for Open with:.
Select Adobe if listed. If it is not listed, select Other..., and navigate to Adobe, and press Add.
In the Get Info window, click on Change All.
If these are pdf documents, that you are viewing on the Internet, a handy utility to use is PDF Browser Plugin.
ali b

Using ocm response file with opatch auto

Similar Messages

Maybe you are looking for