Using ocx controls on form6i (Crystal report 7 control)

I want to call reports developed in crystal report 7.0 (oracle as a backend)
I putted a ocx control on form and called now i want to call different reports from different push buttons.
vinod

Hi Ibai,
Thank you for your interest in CrystalWave. I tried sending this info to the email address you gave but got an undeliverable message.
The links are as follows:
(please use Internet Explorer while accessing the download link)
1. CrystalWave info: http://www.twbs.com/CrystalWave.html
2. CrystalWave download: http://www.twbs.com/cwrfiv2004.asp (You need to fill in your info and the download will start.)
Please do let me know if you are not able to access these links and I can setup a temporary link for you to download the program.
Thanks,
Gopal Viswanathan

Similar Messages

ActiveX Crystal Report Control

Post Author: JLTerMarsch
CA Forum: General
I am using Crystal Reports 8.5 Developer. I know it is old, but I am using the original Crystal Reports Control ActiveX. Where can I get a list of the available commands available to me? e.g. printreport, exportto etc.
Thanks
Jim

Post Author: ejthunder
CA Forum: General
Hello,
You can try the information in this Kbase article:
http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2009096
I found it by searching on "developer help 8.5" in the kbase search field.
If you're developing in VB6 you can also go to the object browser in VB6 and filter on CRAXDRT. The object browser is usually on one of the toolbars in the VB6 IDE. Change the "<All Libraries> option in the upper left corner of the object browser to CRAXDRT and you'll see a filtered list. You can drill into the different objects from here to get a better understanding of the object.
I hope this helps.
EJ

Crystal report control

Hi friends,
i am unable use crystal report control which comes with vb 5.0 where
as controls which is there vb4.0 works fine.
i am facing problem when a close a window which is a report window
created by activex control which shows the report.
please help.
thanks in advance.
praveen
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Post Author: ejthunder
CA Forum: General
Hello,
You can try the information in this Kbase article:
http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2009096
I found it by searching on "developer help 8.5" in the kbase search field.
If you're developing in VB6 you can also go to the object browser in VB6 and filter on CRAXDRT. The object browser is usually on one of the toolbars in the VB6 IDE. Change the "<All Libraries> option in the upper left corner of the object browser to CRAXDRT and you'll see a filtered list. You can drill into the different objects from here to get a better understanding of the object.
I hope this helps.
EJ

Control Chart in Crystal Report

Hi
Is it possible to create control chart in crystal report XI (with upper level and lower level limit)
if it possible, can you please let me know how to do?
Thanks

Not sure its possible in standard CR.
It is possible with an add-in product:
http://www.threedgraphics.com/tdg/enterprise/sap/crce/
Or more specific example:
http://www.threedgraphics.com/tdg/enterprise/sap/crce/images/shewhart.png
-Dan

How to use a connection ODBC in crystal reports viewer?

Hi Guys!
I need to know if for update a report in crystal reports viewer, is necessary, have a connection SAP Business Objects Business Intelligence. How to use a connection ODBC in crystal reports viewer?

Hi Guys!
I need to know if for update a report in crystal reports viewer, is necessary, have a connection SAP Business Objects Business Intelligence. How to use a connection ODBC in crystal reports viewer?

Using Jsp to create a crystal report

Hi,
I am using Jsp to create a crystal report from an oracle database.To create a new report document,i am using the ReportClientDocument class in the
"com.crystaldecisions.sdk.occa.report.application.ReportClientDocument " package.
I am using this code:
 ReportClientDocument rpt=new ReportClientDocument ();
 rpt.newDocument();The report application server running on my machine does not support this.
I have to use an IReportAppFactory interface method which is part of the package com.crystaldecisions.sdk.occa.managedreports.*,, in order to create a new report document.Can anbody help be know how to use this interface in a Jsp??
Any help would be appreciated.
Thanks,

Hi Tim, For security reasons we do not save the database password with the report. There are a few ways to solve what you are trying to do:<ol><li>Use the Create Viewer JSP page wizard to auto-generate the code. You will need to use the API option and select the option to "Log on to existing data connections" as well as the option to "Connect the CrystalReportPageViewer" (Note: I suspect that the reason you had a blank page the first time you tried this is because you did not have an Output option selected) The code that is generated will provide you with the ability to pass in the database authentication and then launch the report in the viewer. </li><li>The other option is to use a JNDI Connection at runtime. If you setup a JNDI Data Source you should have the ability to store the database authentication with the Data Source. To have the report use a JNDI connection at runtime you will need to set the name of the JNDI Data Source using the Properties View of the database in the Report Designer.</li></ol>Anyway, give this a shot and let me know how you make out.Regards, Sean Johnson (CR4E Product Manager) <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>

How to use Dynamic cascading parameter in crystal Report XI ?

Hi,
I want to use Dynamic cascading parameter in crystal Report XI which is to be viewed through the infoview without using the Business View.Is it possible?
I could implemented Dynamic cascading parameter using the CR XI developer without using Business View, but cannot view the report when uploaded it to BOXI, through infoview.
Please suggest..
Thanks in advance..
Rajneesh

In the crystal reports field explorer>right click on parameter field>create new-->name the parameter field and select the type as dynamic. Now in the value field click the row and add the database field also add another field below that by clicking on the next row so..on. The order should be like this parent field first and then child field next...... Also click on the last column to add parmater for each level.
Regards,
Raghavendra

How to use drill down option in Crystal Report

Dear all,
I want to know how to use drill down option in Crystal report 2008. In below i have explained my screnario
For example
My scenario is. In crystal report I have Purchase order like PO101,PO102. Each purchase order have 5 line items. If i drill down each purchase order it should display line item in crystal report.
Regards,
Baskaran.

hi,
Create a Group on 'Purchase order'.
Group Expert -> Select the Purchase Order and Click the arrow button such that it appears right side. Click ok.
GH1 is inserted.
Your detail section should include 'Line items' fields.
Right Click 'Detail' section on left hand side, Click 'Hide (Drill down Ok)'.
Now you will see only 'Purchase order's in Group Headers.
Now when you click on a particular order, you will see respective line items.
Regards,
Vamsee

Using 2 Universe Queries in Crystal Reports

Hi,
I am trying to use Universe queries in a Crystal report.
I want to use 2 Universe queries and then link the common dimensions between them using the Database Expert, is these similar to merge dimensions in Web Intelligence?. Is it possible? Or how can I do to merge objects that came from 2 Universe queries?
My problem is when I tried to execute the report, Crystal Reports get stuck.
Any ideas would be helpful.
Thanks in advance,
Diana

Moved to Universe Design forum

How can we use business object (e.g. crystal report ) in webdynpro abap

Hi All,
We all know that business object has been part of sap products.
But even though in SAP, I really don't know much about business object.
and how can we use the great function of BO and integrate into our development to make
user have much better function and user experience.
Do we have some learning material of BO?
Could someone share some material here?
Thanks and Regards
Aaron.

One of the main ways that you can integrate some Business Objects content with WDA is via FlashIslands. If you are on 7.01 or higher, you have the option to use FlashIslands UI element. There are many tutorials on FlashIslands available on SDN. FlashIslands work well with Xcelsius content, since the output of Xcelsius is a Flex component. It is pretty easy to set the Xcelsius interface to External Connection and then write a wrapper Flex Component around the generated output, so that it can be used in the FlashIslands interface.
For Crystal Reports integration you will need NetWeaver 7.02 (comming early next year). We have integrated Crystal Reports as an output option in the Web Dynpro ABAP ALV and the Classic Dynpro ALV. You don't need to do any development to enable this. You can use two different SAP delivered Crystal Reports templates for the ALV output, or create and add your own templates.
Some of ther BOBJ integration is still in prototype and demo phase within SAP. For instance we have a data interface to send data to Explorer onDemand from any ABAP application. We have a prototype FlashIsland for WebI to run in place within Web Dynpro ABAP. Over future enhancement packages you will see increased integration opportunties with the BOBJ capabilites.

Problem in using Nested IF-ELSE in Crystal Report formula

Hi Experts ,
I am having some problem using Nested IF-ELSE in Crystal Report formula ,
there is no error in the formula but only one condition is working. other condition is not working
i am using this concept in formula workshop :-
' if{EXCISE_INVOICE;1.Basic Excise Duty BED@10 %}<>0 and{EXCISE_INVOICE;1.Education Cess @2%}<>0 and {EXCISE_INVOICE;1.Secondary Education Cess @1%}<>0 and {EXCISE_INVOICE;1.Central Sales Tax(CST)@2%}<>0
then
Sum ({EXCISE_INVOICE;1.Amount}) + {EXCISE_INVOICE;1.BedAmount@10%} + {EXCISE_INVOICE;1.EcessAmount@2%} + {EXCISE_INVOICE;1.SecCessAmount@1%} + {EXCISE_INVOICE;1.CSTAmount@2%}
else
if {EXCISE_INVOICE;1.Basic Excise Duty BED@10 %}<>0 and {EXCISE_INVOICE;1.Education Cess @2%}<>0 and {EXCISE_INVOICE;1.Secondary Education Cess @1%}<>0 and {EXCISE_INVOICE;1.Input VAT@5%}<>0 and {EXCISE_INVOICE;1.Addtional Tax@1%}<>0
then
Sum ({EXCISE_INVOICE;1.Amount}) + {EXCISE_INVOICE;1.BedAmount@10%} + {EXCISE_INVOICE;1.EcessAmount@2%}+{EXCISE_INVOICE;1.SecCessAmount@1% } + {EXCISE_INVOICE;1.VATAmount@5%} +{EXCISE_INVOICE;1.AddTaxAmount@1%(for VAT@4)}
I want that all conditions should work and the condition which is applicable there according to formula it display the result, if i add another condition then it should also work.
kindly tell me the solution of this problem
Regards
Rahul

Try this logic:
if{EXCISE_INVOICE;1.Basic Excise Duty BED@10 %}!=0 and{EXCISE_INVOICE;1.Education Cess @2%} !=0 and {EXCISE_INVOICE;1.Secondary Education Cess @1%} !=0
then
Sum ({EXCISE_INVOICE;1.Amount}) + {EXCISE_INVOICE;1.BedAmount@10%} + {EXCISE_INVOICE;1.EcessAmount@2%} + {EXCISE_INVOICE;1.SecCessAmount@1%}
else
0
+
IF {EXCISE_INVOICE;1.Central Sales Tax(CST)@2%} !=0
then
{EXCISE_INVOICE;1.CSTAmount@2%}
else
IF {EXCISE_INVOICE;1.Central Sales Tax(CST)@5%} !=0
then
{EXCISE_INVOICE;1.CSTAmount@5%}
+
if {EXCISE_INVOICE;1.Addtional Tax@1%} !=0
then
EXCISE_INVOICE;1.AddTaxAmount@1%(for VAT@4)}
else
0
If not work, try SQL command.
Thanks,
Gordon

Use SDK tool to view crystal report!

Hi all,
I have a sceniaro:
In exist form SAP B1 2005, i want to create a button
in crystal report 2008, i create a report
when i click that button(in exist form of B1), it dispaly that report so i create.
Can we do? If can, plz tell me
Note: In VB.NET, we view report by Report viewer

Hi Anh,
Yes, it is possible. You can even override B1's Print and PrintPreview buttons to display your report.
If you process your button approach, then you just need to catch your button's ITEM_PRESSED event and open a .NET form with the ReportViewer control and display the report you designed.
Regards,
Vitor Vieira

Issue with use of shared variables in Crystal Reports 2008 Offline Viewer

Hi,
I have a report that contains a number of sub-reports which include drill-down functionality. The report returns data relating to an individual team with the user being able to view top level summary information in each area from the parent report and then drill into the sub-reports to view see more detail. The data returned by the sub-reports is filtered, using sub-report links, based on the team code parameter value given by the user. This parameter field resides in the main report.
One of the values returned by the main report is the team name. This is passed to each sub-report using a shared variable and each sub-report displays this team name as part of a heading.
This all works fine in Crystal Reports 2008, but when a report, containing data, is opened using Crystal 2008 Offline Viewer there is a problem with the shared variable. The value is displayed correctly when the user initially drills into the sub-report. However, when the user begins to drill into grouped data within the sub-report the value passed to the sub-report using the shared variable disappears.
How can I ensure that, when a report is viewed using Crystal Offline Viewer 2008, the value within the shared variable is not lost when users drill into grouped data within sub-reports
Thanks
Stuart

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

How to create a report using XML data source from Crystal Report Designer

Hi,
Iu2019m having Crystal Report Designer XI R2 SP4. Iu2019m trying to create a report using XML data source stored on disk. This is a customer order report and the xml is structured in such a way that it has an order details header part (master) and then it has several order lines (detail). One order line can have several order line characteristics (detail-detail). So what I need to know is now I can design this layout from the designer. If this was done using views I can do it with sub-reports but using xml data this seems to be different. Can you help me to design this layout? I have included the xml and xsd as well.
Thank you in advance.
Regards,
Chanaka
XML
<?xml version="1.0" encoding="UTF-8"?>
<CUSTOMER_ORDER_CONF_REP_REQUEST xmlns:xsi="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep">
 <CUSTOMER_ORDER_CONF_REP>
 <ORDER_NO>D555809</ORDER_NO>
 <PRINTED_DATE>2009-03-26T08:52:54</PRINTED_DATE>
 <AUTHORIZE_NAME>Chanaka</AUTHORIZE_NAME>
 <CUSTOMER_NO>CU-1473-INV</CUSTOMER_NO>
 <CUST_NAME>Mr.Johan Matts</CUST_NAME>
 <SHIP_ADDR_1>93,Main Street</SHIP_ADDR_1>
 <SHIP_ADDR_2>Negambo Road</SHIP_ADDR_2>
 <SHIP_ADDR_3>Watthala</SHIP_ADDR_3>
 <SHIP_ADDR_4>SRI LANKA</SHIP_ADDR_4>
 <BILL_ADDR_1>93,Main Street</BILL_ADDR_1>
 <BILL_ADDR_2>Negambo Road</BILL_ADDR_2>
 <BILL_ADDR_3>Watthala</BILL_ADDR_3>
 <BILL_ADDR_4>SRI LANKA</BILL_ADDR_4>
 <CUSTOMER_PO_NO>112984638</CUSTOMER_PO_NO>
 <CUSTOMER_FAX>112984639</CUSTOMER_FAX>
 <CUSTOMER_EMAIL>abcbababab</CUSTOMER_EMAIL>
 <ORDER_LINES>
 <ORDER_LINE>
 <LINE_NO>1</LINE_NO>
 <CUSTOMER_PART_NO>NW-IP11</CUSTOMER_PART_NO>
 <CUSTOMER_PART_DESC>iPod</CUSTOMER_PART_DESC>
 <SALE_UNIT_PRICE>1200</SALE_UNIT_PRICE>
 <PRICE_TOTAL>1200</PRICE_TOTAL>
 <DISCOUNT>0</DISCOUNT>
 <PRICE_QTY>1</PRICE_QTY>
 <ORDER_LINE_CHARACTERSTICS>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID xsi:nil="1"/>
 <CHARACTERISTIC_VALUE xsi:nil="1"/>
 </CHARACTERISTIC_ITEM>
 </ORDER_LINE_CHARACTERSTICS>
 </ORDER_LINE>
 <ORDER_LINE>
 <LINE_NO>2</LINE_NO>
 <CUSTOMER_PART_NO>NW-IP24</CUSTOMER_PART_NO>
 <CUSTOMER_PART_DESC>XGA Projector</CUSTOMER_PART_DESC>
 <SALE_UNIT_PRICE>500</SALE_UNIT_PRICE>
 <PRICE_TOTAL>1500</PRICE_TOTAL>
 <DISCOUNT>0</DISCOUNT>
 <PRICE_QTY>3</PRICE_QTY>
 <ORDER_LINE_CHARACTERSTICS>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>Free Instalation</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 </ORDER_LINE_CHARACTERSTICS>
 </ORDER_LINE>
 <ORDER_LINE>
 <LINE_NO>3</LINE_NO>
 <CUSTOMER_PART_NO>NW-IP02</CUSTOMER_PART_NO>
 <CUSTOMER_PART_DESC>Sony DVD Player</CUSTOMER_PART_DESC>
 <SALE_UNIT_PRICE>1000</SALE_UNIT_PRICE>
 <PRICE_TOTAL>1000</PRICE_TOTAL>
 <DISCOUNT>0</DISCOUNT>
 <PRICE_QTY>1</PRICE_QTY>
 <ORDER_LINE_CHARACTERSTICS>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>Free 5 DVDs</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 </ORDER_LINE_CHARACTERSTICS>
 </ORDER_LINE>
 <ORDER_LINE>
 <LINE_NO>4</LINE_NO>
 <CUSTOMER_PART_NO>NW-IP99</CUSTOMER_PART_NO>
 <CUSTOMER_PART_DESC>Flatscreen TV</CUSTOMER_PART_DESC>
 <SALE_UNIT_PRICE>1500</SALE_UNIT_PRICE>
 <PRICE_TOTAL>1350</PRICE_TOTAL>
 <DISCOUNT>10</DISCOUNT>
 <PRICE_QTY>1</PRICE_QTY>
 <ORDER_LINE_CHARACTERSTICS>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>Free Delivery</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>1 year additional warranty</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 </ORDER_LINE_CHARACTERSTICS>
 </ORDER_LINE>
 <ORDER_LINE>
 <LINE_NO>5</LINE_NO>
 <CUSTOMER_PART_NO>NW-IP56</CUSTOMER_PART_NO>
 <CUSTOMER_PART_DESC>Sony MP3 Player</CUSTOMER_PART_DESC>
 <SALE_UNIT_PRICE>200</SALE_UNIT_PRICE>
 <PRICE_TOTAL>400</PRICE_TOTAL>
 <DISCOUNT>0</DISCOUNT>
 <PRICE_QTY>2</PRICE_QTY>
 <ORDER_LINE_CHARACTERSTICS>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>Free carry belt</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>Free promotional 4GB memory bar</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ITEM>
 <CHARACTERISTIC_ID>3</CHARACTERISTIC_ID>
 <CHARACTERISTIC_VALUE>No warranty on memory bar</CHARACTERISTIC_VALUE>
 </CHARACTERISTIC_ITEM>
 </ORDER_LINE_CHARACTERSTICS>
 </ORDER_LINE>
 </ORDER_LINES>
 </CUSTOMER_ORDER_CONF_REP>
</CUSTOMER_ORDER_CONF_REP_REQUEST>
XSD
<?xml version="1.0" encoding="UTF-8"?>
<?report module="ORDER" package="CUSTOMER_ORDER_CONF_REP" ?>
<xs:schema targetNamespace="urn:ifsworld-com:customer_order_conf_rep" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep" elementFormDefault="qualified" attributeFormDefault="unqualified">
<xs:element name="CUSTOMER_ORDER_CONF_REP_REQUEST">
<xs:complexType>
<xs:all minOccurs="1" maxOccurs="1">
<xs:element name="CUSTOMER_ORDER_CONF_REP">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="50">
<xs:element name="ORDER_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="PRINTED_DATE" type="xs:dateTime" nillable="true" minOccurs="0"/>
<xs:element name="AUTHORIZE_NAME" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_PO_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUST_NAME" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_1" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_2" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_3" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_4" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_1" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_2" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_3" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_4" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_FAX" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_EMAIL" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ORDER_LINES" nillable="true" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="ORDER_LINE">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="39">
<xs:element name="LINE_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SALE_UNIT_PRICE" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="PRICE_TOTAL" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="DISCOUNT" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="PRICE_QTY" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="CUSTOMER_PART_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_PART_DESC" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ORDER_LINE_CHARACTERSTICS" nillable="true" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="CHARACTERISTIC_ITEM">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="6">
<xs:element name="CHARACTERISTIC_ID" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CHARACTERISTIC_VALUE" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:all>
</xs:complexType>
</xs:element>
</xs:schema>

Hi Sourashree,
Thank you for the response and ideas you have given me so far. I can get the fetch the data from the data source without any problem. That is I do the following,
1. New Report
2. From Create New Connection-> XML
3. Provide the u201CLocal XML Fileu201D and have u201CSpecify Schema Fileu201D checked -> Next
4. Provide the u201CLocal Schema Fileu201D -> Finish
Then I can see the following under XML
+ CUSTOMER_ORDER_CONF_REP_REQUEST
 CUSTOMER_ORDER_CONF_REP_REQUEST
 CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
 CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES
 CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
 CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS
 CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
And from here if I add the following three I can get all the fields I need to the report
 CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
 CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
 CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
Then I come to the Linking section. Here I canu2019t link anything. There is a common field called u201CInternal_IDu201D but I canu2019t link using it. So I get a message when I click Next. From here I add all the fields.
For this point onwards only I need help. How do I group, add fields and design the layout so I can get an report output as follows.
Date
Order number Authorized code
Customer No
Name
Phone
Fax email
Shipping address 1 Billing Address 1
Shipping address 2 Billing Address 2
Shipping address 3 Billing Address 3
Shipping address 4 Billing Address 4
Order Line 1 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026 LINE_NO CUSTOMER_PART_NO CUSTOMER_PART_DESC SALE_UNIT_PRICE PRICE_QTY DISCOUNT PRICE_TOTAL
Characteristic details belonging to Order line 1 CHARACTERISTIC_ID 1 CHARACTERISTIC_VALUE1
 CHARACTERISTIC_ID 2 CHARACTERISTIC_VALUE2
 CHARACTERISTIC_ID 3 CHARACTERISTIC_VALUE3
Order Line 2 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 2
Order Line 3 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 3
Order Line 4 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 4
Order Line 5 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 5
How can I achieve this kind of a layout using the give xml and xsd? Should I use grouping if so how should I do the grouping?
I have included the full xml and xsd in the first mail I posted but I canu2019t see it now. I can include that again if you want.
Regards,
Chanaka

How to get the list of parameter and set them using RESTFul WS for a Crystal Report

Hi All,
I am able to schedule a Crystal report using following POST Restful call - http://localhost:6405/biprws/infostore/4738/scheduleForms/now and with a request xml body. But report is failing because I am not passing the parameter.
But I need pass parameters/prompts to the Crystal report to execute successfully.
What is the request XML to pass the parameter for the report?
I was able to do this for WEBI reports but I am not able to find any way to do this for Crystal reports?
Any help on this matter is really appreciated.

Hi Venki
Please have a look at:
How to pass parameters and generate the report using RESTful API in VB.net
This is also described in the Developer Help files:
http://help.sap.com/businessobject/product_guides/sbo41/en/sbo41_webi_restful_ws_en.pdf
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Using ocx controls on form6i (Crystal report 7 control)

Similar Messages

Maybe you are looking for