Using of 5.1 encoded soundtrack possible?
I have a video- and audio-recording of a concert. The audio was recorded and mixed with Logic Pro. I also did a 5.1 surround mix. Together with the Compressor tool I now have a final Dolby 5.1 soundtrack.
I am now looking for a video cut software with which I can use this 5.1 surround track. It looks as if Final Cut Pro could handle it. On the other hand: Final Cut Pro is rather expensive and I am more in audio production. Does anyone know if Final Cut Express would be enough for that purpose? May I import a Dolby encoded 5.1 track? The soundtrack should not be encoded again of course when burning on DVD!
Thanks for help or hint.
You need Final Cut Studio, both for FCP and for DVD Studio Pro. FCP does not support 5.1 surround directly.
Similar Messages
-
How do I use daqmx to get encoder direction/count on E-series board?
Hardware:
PCI-6014
Labview 7.1
I have a linear actuator and wish to get distance/direction. The
motor has a quad encoder with phase A and B only. I connected the
lines according the the E-series, PFI-8 and PFI-6, and ground to
digital ground. I then attempted to design a control with daqmx but
failed. I have tried the daqmx examples but none were attempting
a reverse in direction. Most examples given for direction change
are for traditional daq control; i cant make a correlation on what to
use to substite traditional daq with daqmx vi's.
2 questions:
How do I use daqmx to get encoder direction/count on E-series board?
Are there low pass filter vi's recommended for each phase connection to stabilize data?
Thanks,
Wayne HilburnHello Wayne,
Take a look at the Count Digital Events.vi shipping example. You can find this in LabVIEW by selecting Help >> Find Examples... then browsing to Hardware Input and Output >> DAQmx >> Counter Measurements >> Count Digital Events.
If you set the "Count Direction" control to "Externally Controlled", you will be able to count up and down depending on which direction you rotate your encoder. Make sure you wire Phase A to Ctr0 Source and Phase B to P0.6. P0.6 is the up/down line for counter 0.
I hope this helps. Please let me know if you have any further questions.
Regards,
Sean C. -
Dump - Access using NULL object reference is not possible!!!
Hi,
I'm using the BCS class for sending HTM format email so i use the below code for that its working,
DATA: gr_document TYPE REF TO cl_document_bcs,
gr_document = cl_document_bcs=>create_document(
i_type = 'HTM'
i_text = t_html
i_importance = '5'
i_subject = gc_subject ).
Next task is to send the image so i'm creating an another object to the same class, below code
*Image from MIME
DATA: o_mr_api TYPE REF TO if_mr_api.
DATA is_folder TYPE boole_d.
DATA l_img1 TYPE xstring.
DATA l_img2 TYPE xstring.
DATA l_loio TYPE skwf_io.
DATA: lo_document TYPE REF TO cl_document_bcs.
IF o_mr_api IS INITIAL.
o_mr_api = cl_mime_repository_api=>if_mr_api~get_api( ).
ENDIF.
CALL METHOD o_mr_api->get
EXPORTING
i_url = '/SAP/PUBLIC/ZDEMO/tick.png'
IMPORTING
e_is_folder = is_folder
e_content = l_img1
e_loio = l_loio
EXCEPTIONS
parameter_missing = 1
error_occured = 2
not_found = 3
permission_failure = 4
OTHERS = 5.
CALL METHOD o_mr_api->get
EXPORTING
i_url = '/SAP/PUBLIC/ZDEMO/Delete.png'
IMPORTING
e_is_folder = is_folder
e_content = l_img2
e_loio = l_loio
EXCEPTIONS
parameter_missing = 1
error_occured = 2
not_found = 3
permission_failure = 4
OTHERS = 5.
*Convert XSTRING to ITAB
DATA :lt_hex1 TYPE solix_tab,
lt_hex2 TYPE solix_tab,
ls_hex LIKE LINE OF lt_hex1,
lv_img1_size TYPE sood-objlen,
lv_img2_size TYPE sood-objlen.
CLEAR : lt_hex1, lt_hex2, ls_hex, lv_img1_size, lv_img2_size.
WHILE l_img1 IS NOT INITIAL.
ls_hex-line = l_img1.
APPEND ls_hex TO lt_hex1.
SHIFT l_img1 LEFT BY 255 PLACES IN BYTE MODE.
ENDWHILE.
WHILE l_img2 IS NOT INITIAL.
ls_hex-line = l_img2.
APPEND ls_hex TO lt_hex2.
SHIFT l_img2 LEFT BY 255 PLACES IN BYTE MODE.
ENDWHILE.
*Findthe Size of the image
DESCRIBE TABLE lt_hex1 LINES lv_img1_size.
DESCRIBE TABLE lt_hex2 LINES lv_img2_size.
lv_img1_size = lv_img1_size * 255.
lv_img2_size = lv_img2_size * 255.
*Attach Images
clear: lo_document.
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'png' " Document Class for Attachment
i_attachment_subject = 'img1' " Attachment Title
i_attachment_size = lv_img1_size " Size of Document Content
i_att_content_hex = lt_hex1 " Content (Binary)
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'png' " Document Class for Attachment
i_attachment_subject = 'img2' " Attachment Title
i_attachment_size = lv_img2_size " Size of Document Content
i_att_content_hex = lt_hex2 " Content (Binary)
but it throws the dump " Access using NULL object reference is not possible" when i tries to access for method add_attachment...
Thanks,
SivaYes there is commit work after that, Below code
gr_document = cl_document_bcs=>create_document(
i_type = 'HTM'
i_text = t_html
i_importance = '5'
i_subject = gc_subject ).
*Image from MIME
DATA: o_mr_api TYPE REF TO if_mr_api.
DATA is_folder TYPE boole_d.
DATA l_img1 TYPE xstring.
DATA l_img2 TYPE xstring.
DATA l_loio TYPE skwf_io.
DATA: lo_document TYPE REF TO cl_document_bcs.
IF o_mr_api IS INITIAL.
o_mr_api = cl_mime_repository_api=>if_mr_api~get_api( ).
ENDIF.
CALL METHOD o_mr_api->get
EXPORTING
i_url = '/SAP/PUBLIC/ZDEMO/tick.png'
IMPORTING
e_is_folder = is_folder
e_content = l_img1
e_loio = l_loio
EXCEPTIONS
parameter_missing = 1
error_occured = 2
not_found = 3
permission_failure = 4
OTHERS = 5.
CALL METHOD o_mr_api->get
EXPORTING
i_url = '/SAP/PUBLIC/ZDEMO/Delete.png'
IMPORTING
e_is_folder = is_folder
e_content = l_img2
e_loio = l_loio
EXCEPTIONS
parameter_missing = 1
error_occured = 2
not_found = 3
permission_failure = 4
OTHERS = 5.
*Convert XSTRING to ITAB
DATA :lt_hex1 TYPE solix_tab,
lt_hex2 TYPE solix_tab,
ls_hex LIKE LINE OF lt_hex1,
lv_img1_size TYPE sood-objlen,
lv_img2_size TYPE sood-objlen.
CLEAR : lt_hex1, lt_hex2, ls_hex, lv_img1_size, lv_img2_size.
WHILE l_img1 IS NOT INITIAL.
ls_hex-line = l_img1.
APPEND ls_hex TO lt_hex1.
SHIFT l_img1 LEFT BY 255 PLACES IN BYTE MODE.
ENDWHILE.
WHILE l_img2 IS NOT INITIAL.
ls_hex-line = l_img2.
APPEND ls_hex TO lt_hex2.
SHIFT l_img2 LEFT BY 255 PLACES IN BYTE MODE.
ENDWHILE.
*Findthe Size of the image
DESCRIBE TABLE lt_hex1 LINES lv_img1_size.
DESCRIBE TABLE lt_hex2 LINES lv_img2_size.
lv_img1_size = lv_img1_size * 255.
lv_img2_size = lv_img2_size * 255.
*Attach Images
create object lo_document type cl_document_bcs.
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'png' " Document Class for Attachment
i_attachment_subject = 'img1' " Attachment Title
i_attachment_size = lv_img1_size " Size of Document Content
i_att_content_hex = lt_hex1 " Content (Binary)
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'png' " Document Class for Attachment
i_attachment_subject = 'img2' " Attachment Title
i_attachment_size = lv_img2_size " Size of Document Content
i_att_content_hex = lt_hex2 " Content (Binary)
"Add document to send request
CALL METHOD gr_send_request->set_document( gr_document ).
TRY.
CALL METHOD gr_send_request->SET_SEND_IMMEDIATELY
EXPORTING
I_SEND_IMMEDIATELY = 'X'.
* CATCH CX_SEND_REQ_BCS INTO BCS_EXCEPTION .
**Catch exception here
ENDTRY.
DATA: LO_SENDER TYPE REF TO IF_SENDER_BCS VALUE IS INITIAL.
TRY.
LO_SENDER = CL_SAPUSER_BCS=>CREATE( SY-UNAME ). "sender is the logged in user
* Set sender to send request
gr_send_request->SET_SENDER(
EXPORTING
I_SENDER = LO_SENDER ).
* CATCH CX_ADDRESS_BCS.
****Catch exception here
ENDTRY.
"Send email
CALL METHOD gr_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = gv_sent_to_all ).
IF gv_sent_to_all = 'X'.
WRITE 'Email sent!'.
ENDIF.
"Commit to send email
COMMIT WORK.
"Exception handling
CATCH cx_bcs INTO gr_bcs_exception.
WRITE:
'Error!',
'Error type:',
gr_bcs_exception->error_type.
ENDTRY. -
BSP: Use of dynpro services is not possible in the current system status
Hello,
in the component SRQM_INCIDENT_H i created a own button and eventhandler on the overview view.
Here in this eventhandler i´m calling an own method from an own class. This method is doing a RFC in our ERP system.
If i test the method this works fine.
If i call this method in my eventhandler i get BSP error:
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Use of dynpro services is not possible in the current system status
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Error Name
Program ZCL_CRM_CS_DATA_SERVICES======CP
Include ZCL_CRM_CS_DATA_SERVICES======CM001
ABAP Class ZCL_CRM_CS_DATA_SERVICES
Method CREATE_CS_ORDER
Line 54
Long text -
Error type: Exception
Any ideas?
thank you
Best regardsHi,
Web-UI cannot handle MESSAGE statements. if it's your own program, you should use the web-ui( view_manager->get_message_container or cl_crm_bol_core's global message container) alternatives to display the messages. If the message statement is being issued by a standard program, it's most usually deliberate attempt to fail on unrecoverable error. You can catch it by usin the try...catch CX_SY_MESSAGE_IN_PLUGIN_MODE ..where you call the standard functions.
Regards,
Arun Prakash -
CRM70 Use of dynpro services is not possible in the current system status
Hi all,
i programmed in Webclient UI an own button which calls a Method of a zclass. Within this method i do a remote function call in ERP.
I can test the method successfully but if i call it from CRM Webclient UI i have a BSP error:
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Use of dynpro services is not possible in the current system status
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Could one of you experts please give me a hind?
Thank you
Kind regards
ManfredSolved,
there was a SAP GUI "MESSAGE" in the ERP function call which is not possible for CRM Webclient UI.
Kind regards
Manfred -
Use of dynpro services is not possible in the current system status
Hi,
I am new to all of this and new to SAP. I will bew self learing my way into CRM SOA, working with the web service creaiton i keep getting the following errlr when rtying to Activate a new created web service:
"Use of dynpro services is not possible in the current system status"
not knowing the system that well i wonderin if there is missing configuration. This is CRM 7.0
Exception Class CX_SY_SEND_DYNPRO_NO_RECEIVER
Error Name DYNPRO_SEND_IN_BACKGROUND
Program SAPLSKEY
Include LSKEYU03
Line 33Hi Keith,
Welcome to the SCN forums!
SAPLSKEY
You should first check your Abap dumps using tranaction code ST22, this usually provides more detail on the problem.
In this case I think it's trying to return a screen (or pop-up message) that can't be handled while activating the web service. The "SAPLSKEY" tells me that it might be licence related, do you have a valid developer's licence for Abap development work? If not apply for one (find out the procedure from other Abap developer's that you may work with) & check if that makes a difference while activating.
Regards, Trevor -
Use of dynpro services is not possible...
I created a webservice in our devcrm 7.0 to retrieve contact data (name, address...) to use in an adobe xml attachment within CRM
I check data and all is successful, but when I acivate, I get the Business Server Page (BSP) error
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Use of dynpro services is not possible in the current system status
Exception Class CX_SY_SEND_DYNPRO_NO_RECEIVER
Error Name DYNPRO_SEND_IN_BACKGROUND
Program SAPLSKEY
Include LSKEYU03
Line 33
Long text -
Error type: Exception
Any helpw would be greatly appreciated.
Edited by: cshealy on Mar 7, 2011 5:43 PMDid you create this web service using the wizard in the Web UI?
Looking at the error it's occuring in function module DEVELOPER_CHECK, maybe you could try registering your user as a developer in the system or using a developers account to create the service.
Gregor -
How to distill a MS WORD file to strictly PDF/A‑1a:2001 by using Acrobat XI? Is that possible at all?
It is Amazing because in the Product description to the buyer as you learn from this discussion and see the links it is not absolutley explicit. There is the Product page for standard on:
http://www.adobe.com/products/acrobatstandard.html
there you find the option "more..." under "top features" for Adobe Acrobat Standard, you click and com to:
Features | Adobe Acrobat XI Standard
Then down there you see as top feature:
"http://www.adobe.com/products/acrobat/iso-pdf-x-32000-standards.htmlhttp://www.adobe.com/products/acrobat/iso-pdf-x-32000-standards.htmlIMPROVED Conform to ISO PDF standards
Create PDF documents that comply with standards managed by the International Organization for Standardization (ISO)."
and with a image that shows that the product includes both PDF/A and PDF/X.
Even if you follow this link further to:
PDF ISO 32000, PDF/X, PDF archive | Adobe Acrobat XI
The URL indeed says "acrobatstandard" and the page does not distinguish.
Only the section:
"Get help creating accessible PDF files/ Simplify the creation and verification of PDFs that need to conform to accessibility standards for people with disabilities. The Make Accessible guided Action* will help you every step of the way."
is explicitly with anasterix footnoted and is distinguished. It makes clear to buyer that "PDF/X and PDF/A are part of the Standard version", I would say.
I would say as a buyer of the Standard version under these conditions of product description it is normal to believe that two of the most basic "standards" are in the "Standard" version included PDF/X and PDF/A, otherwise Adobe would Asterix and footnote it at least or be more explicit and not mention it as Improvement a.s.f. Another interpretation would be to get the buyer first buying without very explict information the Standard version and then making him over days of trial and questions in a forum where people have also similar problems: Aha!! it is not included. "Upgarde it! and pay us more!"
This is amazing, Gilad. -
I have Mac Mini that I connect wirelessly. I want to share that internet on this mac mini with my receiver using wired internet. Is it possible? How?
Is it the same user/iTunes account or...?
Syncing to a new computer should give you the opportunity to replace the exisiting contents with the new. -
RFC to HTTP Interface - Access using NULL object reference is not possible
Hi All,
I am working on a Interface RFC to HTTP where in I am sending the data to a third party system.
Using PI 7.3 and Adapter type XI to send this data.
I am getitng an error Short dump occured when executing message in qRFC queue <Queuename>: Date/time 02.12.2011 08:44:57, user XXXXX, runtime error: Access using NULL object reference is not possible.
<SAP:Code area="INTERNAL">QRFC_SYSTEM_DUMP</SAP:Code>
I am entering the parameters such as target host,service number,path correctly with addrseing type as URL.
The message is failing in the call adapter step with the above error.
There are no messages stuck in SMQ2 as well.
Now on the other if I use the adapter type HTTP_AAE the messages is getting successfully delivered with the same parameters mentioned above.But as we know it is a plain adapter and will not have the SOAP envelope.
We would want to send the data using the XI adapter.
Any idea as why this issue is happening?
Helpful answers will be rewarded points.
Thanks & Regards,
RKHi,
please go through below threads,
Error for all the interfaces
Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM
hope it will help you
regards,
ganesh -
Can any one tell me when i use adobe flash media encoder how can i see my live vidoes on flash media
can any one tell me when i use adobe flash media encoder how can i see my live vidoes on flash media server . thnx
Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Hack Allows PowerPC Macs to Access Flash 11 Content
http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
Cheers, Tom -
I have produced (7) hard cover iPhoto books in the last three years using several of the provided templates. I would like to create a photo book using a custom photo arrangement if possible. Is it possible to create a custom photo book?
No - you can create custom pages in other software and use them
Using iPhoto you are limited to the themes adn layouts offered
LN -
I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found
You have to go to autherized iPhone agent.
-
I am confused. Tell me what to do.. I am using Indesign and want to go on using the program as cheap as possible. Which possibilities have I got?
Not enough information to provide an answer... do you have a licensed (old) version, or do you have a Cloud subscription?
-
I want to measure rpm using 100 ppr incremental encoder via digital input
i want to measure rpm using 100 ppr incremental encoder via digital input max speed (4000 rpm)
am using 9178 c-DAQ chassis and 9426 digital input module
pl provide me example code for thisHi asaccullo.
The recommended settings for encoders are using the counters in the daq cards. Using digital I/O’s is not recommended, the encoders send digital signals but one of the main differences between using digital IO vs counters is that counters are designed to handle these type of events.
Here I found several examples in ni.com/code that you might check:
Imitation Quadrature Encoder with DAQmx Counter Tasks
Use Counter Frequency to obtain an Encoder Rotational Speed
An Elvis is a daq device, so this should work for you.
I also found an example for myDAQ, it uses the DIO but with a counter task in the set up.
Regards,
steve.bm
AE | NI
Maybe you are looking for
-
Hi Experts, i am having the data in DM1 but getting error in QM1 while extracting data in data source asBuffer Table not up-to-date after that it's going to dump issue in QM1 but few records are available when i am increasing data packets not getti
-
Iphone glitchy after repair. Need help Please.
So I cracked my screen at the gym over two months ago. WEIGHT fell on it, yeah pretty %^## dumb. Saw it was 269.00 for repair, I was afraid. My friend said he would do the repair for 120 with a year warranty, still to expensive. I started watching DI
-
Withholding tax amount exceeds the customer/vendor line item amount
Hi experts I am having one problem please help me My user created one down payment, entry is like this Vendor Dr-193914 To TDS 3878 To Bank 190036 After this he has booked MIRO with the same value 193914 & has deducted TDS 3878 over that invoi
-
Two ssd 64gb raid 0 and two sata 320 w d hd raid 0
Hello I am having issues getting the WD 320Gig hard drive's to run in raid 0 System see the SSD in raid 0 .......but not the WD's in windows 7..... during boot up it see the WD's in the boot up and in the raid screen Thermal Take Dokker Case AMD x4 9
-
Mac Mini (Mid 2010) Unable to write to external HD
Hey All, I have a Mid 2010 Mac Mini that becomes unable to write to a drive after an extended period of the drive being connected. HD is an external HD with it's own power supply connected of USB. Both iTunes (Using the drive to store Library) a