Using old drivers safe?

I currently got a new iMac with Mavericks installed, and I want to use my old Wacom tablet. I downloaded the latest driver (circa 2007) and when I tried to install it, I got the message:
"Install Wacom Tablet.pkg" can't be opened because it's from an unidentified developer".
If I bypass this, is it safe to install?

Yes.

Similar Messages

  • PCI-MXI-2 Using old drivers on new OS

    I have a PCI-MXI-2 card that is currently in a Windows Xp computer.
    The windows xp computer is using the driver  NI VXI 2.1.1 (Windows 9x/NT/2000).
    This current setup works. I would now like to move to Windows 7.
    The card is connected by VXI to a VME-MXI-2 card, which is configured with three measurement cards from an outside company.
    Because of the hardware that I am using, I believe I must keep the orriginal driver in order for it to work. I have not been successful with newer NI drivers.
    Does anyone have advice on using older NI drivers on newer operating systems?
    I have not been having much luck with this approach so far.
    Solved!
    Go to Solution.

    Update:
    - I removed all the national instruments software
    - I installed the old drivers on Windows 7 in compatibility mode (ni vxi 2.1.1, VISA shared components 1.6, IVI shared components 2.2.1)
    - I made sure that all software was the same version as on the old machine
    - I then configured the boards with T&M manager
    Success. Everything now works.  This is a very valid approach for those using old hardware that can't handle the new drivers. 

  • Can I use / find drivers for an HP Deskjet 3520e on OSX 10.4.11

    Can I use / find drivers for an HP Deskjet 3520e on OSX 10.4.11

    Thanks for suggestion but HP Support Center don't support the HP Deskjet 3520 e.
    Our old iMac wont upgrade to "snow-leopard"  -   the drivers supplied with the printer are not backwards compatible beyond IOS 10.6.  We are max-updated at 10.4.11.
    Tried a "gimp" (?) set of drivers which goes through an auto-install but I can't see or select the drivers.
    Find it hard to believe that there is no solution

  • Uninstalling old drivers quest

    Not sure how to find old drivers to uninstall before putting my new sound card in and installing the drivers. What will happen if I don't uninstall the old drivers first?

    Just use this method and settings to install drivers.
    jutapa

  • Deleting Old Drivers. Driver's Folder

    Where can I find the driver's folder or folders in the Mac OSX leopard? I want to delete some old drivers and I just can't find the folder.
    Thanks

    I just noticed I have 2.76 GB of drivers in /library/printers.
    Is there any downside with deleting most of these, especially for printer brands I doubt I will ever use?

  • Do I need to remove old drivers before installing new ones (Windows XP)

    I have an  Acer Aspire 3690 laptop with Windows XP home edition installed. I've reinstalled the OS by using recovery tool, updated it again. I want to finish setting my laptop up by updating some drivers, mainly chipset and GPU. I've already found that newer ones are availabe. But do I need remove the old drivers first to avoid any problems in the future? Or do I just run the setup executable of every driver?

    Run the setup and check if the new one are installed; if not remove the old drivers and install the new.

  • Use old HD with new P965 Platinum MB. Possible?

    If I wanted to use my present HD with my new P965 Plat board, I have to boot with the OS CD and do a "repair" or a "install", or is this even possible?  Has anyone tried/done it?  Thanks.

    Your "old HD" is P-ATA (IDE), right?
    Theoretically it should not be a problem, if there is still room for a second drive on the JMicron IDE-port. 
    However, you should install a fresh XP SP2 onto that drive using JMicron Drivers (F6).  Just "reparing" the existing installation might not work properly.

  • Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with MacBookPro 13" Mid-2012 running 10.8.4? Tried mini display to VGA cable

    Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with a MacBookPro 13" Mid-2012 laptop?  Would like to use larger screen when working at home.  I have a mini display port to VGA cable and have tried to hook up the old display but it seems not to work.  When I try to activate the screen on the old display-- a window comes up in the MacBookPro and asks me if I want to shut down the computer.  What little I have read it that the MacBookPro had Thunderbolt and the old display may not be compatible?  Any assistance would be appreciated.

    quax88 wrote:
    11.09.12 22:16:06,148 ClamXavSentry[286]: scan email files
    11.09.12 22:16:06,148 ClamXavSentry[286]: I will quarantine infected files
    This doesn't have anything to do with your problem, but it will likely cause other issues with your e-mail.
    Here's my standard recommendation concerting the use of A-V software to deal with potentially infected messages:
    Never use ClamXav (or any other A-V software) to move (quarantine) or delete e-mail. It will corrupt the mailbox index which could cause loss of other e-mail and other issues with functions such as searching. It may also leave the original e-mail on your ISP's e-mail server and will be re-downloaded to your hard drive the next time you check for new mail.
    So, if you choose to "Scan e-mail content for malware and phishing" in the General Preferences, make sure you do not elect to either Quarantine or Delete infected files.
    When possibly infected e-mail files are found:
    Right-click/Control-click on either the infection or file name in the ClamXav window.
    Select "Reveal In Finder" from the pop-up menu.
    When the window opens, double-click on the file to open the message in your e-mail client application.
    Read the message and if you agree that it is junk/spam/phishing then use the e-mail client's delete button to delete it (this is especially important when the word "Heuristics" appears in the infection name).
    If you disagree and choose to retain the message, return to ClamXav and choose "Exclude From Future Scans" from the pop-up menu.
    If this is a g-mail account and those messages continue to show up after you have deleted them in the above manner, you may need to log in to webmail using your browser, go to the "All Mail" folder, find the message(s) and use the delete button there to permanently delete them from the server.
    To fix the corrupted mailbox index(es), highlight each one that was corrupted and choose Rebuild from the appropriate menu.

  • I have an iPad 2 and used old Apple ID for iBook app; now it wants to upgrade but I have a new Apple ID, how can I make certain I don't lose any data in my iBooks?

    I have an iPad 2 and used old Apple ID for iBook app; now it wants to upgrade iBook but it is "stuck" on my old ID, yet I already created a new ID but it won't let me update the App.  I have everything backed up on my MacBook so if I delete iBooks on my iPad and retrieve the App under my new ID and then sync with my MacBook, will I still have all of the books, etc.?

    Your purchases are tied to your Apple ID. If you bought all of the books with the old ID then AFAIK you will have to continue to use that ID in order to continue to sync those books to the iPad.
    You have to update the app with the old ID so I don't see how you could keep the books with the new ID. Maybe I am wrong about this, but someone else will chime in I'm sure and correct me if I am wrong.

  • I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

    I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

    Hello farahani hairon nizar,
    If your Apple ID was changed from your old account, you may have to change it back to your old account to be able to sign out and then change it back after that is done. Take a look at the article below for more information. 
    If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/en-us/HT203828
    Regards,
    -Norm G.  

  • I am trying to use old style figures in Page '14 I guess, the latest version. Do I need to use a specific font? Where should I look.

    I am trying to use old style figures for a school typology project. I can't find them. I think I might need a specific font, but I dont know what that would be.

    austinjschafer wrote:
    The gear was at the top left, not the bottom. Just for future help.
    Thanks!  I guess they were bored with having at the bottom for 10 years....
    You will probably find that the typography panel in Pages 5 is kind of broken, you need to close it and reopen for each new font, and I think small caps and various other things do not work yet.

  • Hi, firstly my ipod touch is working fine in itunes. i reformated my computer so i lost all my old drivers ect ect, so now my ipod shows up as an image device. i have reinstalled itunes several times and installed apple mobile device but still doesnt work

    hi, firstly my ipod touch is working fine in itunes. i reformated my computer so i lost all my old drivers ect ect, so now my ipod shows up as an image device. i have reinstalled itunes several times and installed apple mobile device but still doesnt work, i have also searched for the usbappl or whatever it is and i cant find it, i have usbappl .dll but no .sys or .inf please help

    All it is supposed to show up as in Windows is an image device.
    If it's working fine in iTunes, what is the issue?

  • Can I use LINUX Drivers in Solaris 10...

    As a beginner, I have installed Solaris 10 version 08/07 onto my system. The motherboard is ASUS M2A-VM, with integrated graphics, network interface, audio, etc...
    My audio and network interface are not working... The motherboard came with a cd which has windows drivers and additional software.
    It also has linux drivers for:
    Audio:
    Core5
    Core6
    Linux
    RHEL4
    SUSE10
    Other
    realtek-linux-audiopack-4.05f
    LAN
    FreeBSD
    Linux
    SCO_OpenServer6
    Unixware7.x
    Chipset, and RAID!
    Has anyone used any of these ASUS Linux drivers with Solaris...
    If so what steps do I need to take to get them to work on my system! (I hate to ask, I know you all have better things to do) Maybe you can point me to a good book that explains how to go step by step...
    My question is how do I get my NIC to work (What steps do I need to follow? the sound is not an issue, as, I can do with out that. Will any of the drivers mentioned above work?) thank you in advance for your answers...

    Drivers are the "connective tissue" between the Operating System and the hardware. The connections from the drivers to the OS are not compatible between different operating systems, so no, you cannot use Linux drivers in Solaris.
    If the OS is similar enough you can sometimes get away with it -- example, using Solaris 9 drivers in Solaris 10. But between completely different OSes? Won't work.

  • I want to clean all of the cookies and bugs that are in my computer causing it to be slow. What program should I use that is safe and won't mess up my computer?

    I want to clean all of the cookies and bugs that are in my computer causing it to be slow. What program should I use that is safe and won't mess up my computer?

    Problem description:
    I would like to clean up my computer. Its beginning to run slow and I believe cookies and bugs are apart of the reason.
    EtreCheck version: 2.0.6 (91)
    Report generated October 26, 2014 at 4:59:31 PM EDT
    Hardware Information: ℹ️
      MacBook Air (13-inch, Early 2014) (Verified)
      MacBook Air - model: MacBookAir6,2
      1 1.4 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Not upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en0: 802.11 a/b/g/n/ac
    Video Information: ℹ️
      Intel HD Graphics 5000 -
      Color LCD 1440 x 900
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 13 days 2:41:41
    Disk Information: ℹ️
      APPLE SSD SD0128F disk0 : (121.33 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 120.47 GB (70.38 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
      Apple Internal Memory Card Reader
      Apple Inc. iPhone
      General USB Flash Disk 16.13 GB
      S.M.A.R.T. Status: Verified
      MSD (disk1s1) /Volumes/MSD : 16.13 GB (11.18 GB free)
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Extensions
      [loaded] foo.tap (1.0) Support
      [loaded] foo.tun (1.0) Support
    Startup Items: ℹ️
      tap: Path: /Library/StartupItems/tap
      tun: Path: /Library/StartupItems/tun
      Startup items are obsolete and will not work in future versions of OS X
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.wdhelper.plist
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.perion.searchprotectd.plist Support
    User Launch Agents: ℹ️
      [loaded] com.genieo.completer.download.plist Support
      [loaded] com.genieo.completer.ltvbit.plist Support
      [running] com.genieo.completer.update.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [invalid?] com.jdibackup.ZipCloud.autostart.plist Support
      [running] com.zeobit.MacKeeper.Helper.plist Support
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
      DirectorShockwave: Version: 12.1.3r153 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
      QuickTime Plugin: Version: 7.7.3
      Default Browser: Version: 537 - SDK 10.9
    User Internet Plug-ins: ℹ️
      TroviNPAPIPlugin: Version: 1.0 - SDK 10.9 Support
    Safari Extensions: ℹ️
      Trovi Search for Safari (Disabled)
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          53% mds
          9% WindowServer
          3% mds_stores
          3% storeagent
          2% hidd
    Top Processes by Memory: ℹ️
      920 MB mds
      31 MB com.apple.WebKit.WebContent
      30 MB Messages
      29 MB Safari
      21 MB WindowServer
    Virtual Memory Information: ℹ️
      31 MB Free RAM
      713 MB Active RAM
      681 MB Inactive RAM
      1.09 GB Wired RAM
      17.85 GB Page-ins
      1.95 GB Page-outs

  • HT4285 i have been using my mac book pro for almost an year..My  use is pretty safe as i use it only at my home and do not carry it at office... my sues is shall i consider the APPLECARE PLAN....the plan is almost 20% of the laptops cost.

    i have been using my mac book pro for more than 11 months.
    .My  use is pretty safe as i use it only at my home and do not carry it to office...
    my  confusion is that shall i consider the APPLECARE PLAN....the plan is almost 20% of the laptops cost....Will spending so much money be worth it

    Like any other insurance, it's only worth it if you have a problem.  I've purchased it on my "high risk" Macs and not purchased on the others.  So far I've never needed it. 

Maybe you are looking for

  • JABBER WILL SUPPORT MAC LAPTOPS and IPHONE OR NOT

    HI,, I want to give customer a solution with CUCM BE 8.5 . Customer wants to get connected to his office from his MAC laptop and I PHONE . I want to know that Cisco JABBER will be applicable in that . And Cust they dont want to buy any Precense serve

  • Veritas volume manager for solaris 10

    Hi All which version veritas volume manager will support solaris 10 06/06. can you just update a link for reference Regards RPS

  • Clearing digital signatures

    Hope someone can help. I've used the digital signatures tool under Tools/Forms menu to add sgnature fields for our firm and our clients to sign. What I want is to be able to lock those signatures once they are signed. I have gone to the Properties of

  • Some windows won't display?

    For some reason, some of my windows in dreamweaver will not display correctly, or much at all. For instance, when you first open dreamweaver and select "new dreamweaver site" all I get is a window that displays a few text fields and then whatever is

  • Flex strings never cleared from the memory

    I have this weird problem for a while and try to solve it to look up on the net for proper solution but still I am clueless. When I check my application's memory usage with flex profiler (4.6) the portion of String keep increasing and eventually reac