Using Old Map functionality "Tracking" with firmwa...

Hi,
We have lost the above functionality with latest firmware. Has anybody find any work around to restore above functionality?

26-Dec-2007 10:53 PM
maid wrote:
I agree,
How do I remove the Nokia Maps?
I am going to install Route66.
You can't uninstall Nokia Maps, it's part of the ROM. Just install whatever new app you want to use (tom tom, route66, google maps, etc.) and use it instead.

Similar Messages

  • How to acheive IF elseif elseif else  condition using std mapping functions

    How to perform the following mapping using standard graphical functions:
    if (a = 1)
    result.addValue("3");
    else if (a = 2)
    result.addValue("6");
    else if (a = 5)
    result.addvalue("7");
    else if (a = 10)
    result.addValue("11");
    else
    result.addValue(a);
    can this requirement be acheived without using a UDF?
    Regards
    bhasker

    UDF is better way to get this done.
    you try like this using Standard function:
                                               Const 3    /THEN     
                                      (A equals 1)   IF              (output of ifThenElse) ->TragetFiled
                                                            \ELSE
                                                  /THEN     /(output of IfThenElse input to else of first If)
                                              IF               /
                                                 \ELSE
    Like wise for other conditions....
    In else part of ifThenElse, give the output of second ifThenElse. here in ths case you need four ifThenElse.
    CodeGenerated:
    /ns0:MT_/targetFIELD = iF(const([value=3]), stringEquals(/ns0:MT_XML_OB/A=, const([value=1])),
    iF(const([value=6]), stringEquals(/ns0:MT_XML_OB/A=, const([value=2])),
    iF(const([value=7]), stringEquals(/ns0:MT_XML_OB/A=, const([value=5])),
    iF(const([value=11]), stringEquals(/ns0:MT_XML_OB/A=, const[value=10])), /ns0:MT_XML_OB/A=))))
    Ritu
    Edited by: Ritu Sinha on Apr 13, 2009 2:48 PM

  • Using old HP Laserjet printer with iBook

    I have an old HP Laserjet 4M that I'd like to use with my new iBook. Problem is that it's got a parallel port and a serial port. I read online that Laserjets do not use serial ports, and that I should use AppleTalk. Anyone know how to set this up? And can I use the Keyspan serial to usb cable in this case?
    Need much help.

    Just to add on,
    Henry is right, here is a forum from MacFixIt:
    http://www.macfixitforums.com/php/showflat.php?Cat=&Board=Forum40&Number=721018& page=0&view=expanded&sb=5&o=31&fpart=
    They have a link to AsanteTalk
    I hope this helps,
    Jon

  • Use old apple base stations with a new one

    Can I use an Apple extreme base station (A1034) with Apple express base station to use feaures like AirPlay and extend WiFi coverage?
    Express station would be the main base then (A1034) would extend its coverage and use features.  Would this work or is it too old?
    Jamie

    Thanks for the info.
    You are going to run into some problems.
    The Mac(s) running Mavericks cannot be used to set up or configure the older AirPort Extreme.
    But, even if they could, there is no setting on the older AirPort Extreme to "extend a wireless network".
    If you could permanently connect the older AirPort Extreme to the AirPort Express using an Ethernet cable, you would have some limited use, but you would need to have a Mac running Leopard, or Snow Leopard, or a PC to be able to set up the old AirPort.

  • Trying to use old HP Scanjet 6200C with Mini

    I'm trying to use an old scanner that was never supported for Macs as far as I know.
    When I connect it to a Windows computer, it seems to work.
    When I connect it to my Mac Mini, it's reported as present on my USB 2.0 hub, the same hub that has a working printer. I've tried to access the scanner with SANE/TWAIN (with ImageCapture), VueScan, and ScanAgain. None of them can see it. But they do recognize and support a Canon MP620 printer/scanner which is defined on my wireless LAN.
    Any ideas as to why none of these applications can access the scanner? If you have a suggestion for a different forum for this problem, that would also be appreciated.
    Thanks.
    Dave

    Well, based on a few tests, my problem may be solved, though I can't be sure of the solution.
    In addition to the advice from Boece, I may have been steered in the right direction when I had trouble synching my iPod through my external USB hub. (It was a problem installing an OS update on the device.) Apple's Support site suggested connecting directly to the Mac, and that did the trick.
    So I tried the same thing with the scanner, and things are working now. BUT I also upgraded to Snow Leopard and then had to upgrade VueScan for compatibility with Snow Leopard, so it could have been a combination of things. But making the direct USB connection to the Mac was probably the key.
    I still plan to try access through SANE but haven't had time to download the version compatible with 10.6.

  • Using old ipod mini charger with nano

    Ive got the old Fireware charger and home plug socket thing i got with my ipod mini.. can it be used with a nano?
    just so i dont have to use a pc to charge it...
    i would try it but i dont want it to blow up or somthing...
    thanks..
    crappy pc...   Windows XP Pro   i want a mac..

    You can use it. It will charge the iPod nano with no problems at all.

  • Using Next/Prev on Track with stories causes player to stop

    I have a Track (125 mins long) with four clips in it.
    I'm using chapter marks, a dual layer break mark and stories to either play all or each clips separately (with return to button selected.
    Now, the navigation works fine, as long as you do not start to use the remote buttons Next or Previous. I want the user to being able to do this when the "Play all button" is selected. But eventually I end up playing my First Play or the player simply stops.
    My current workaround is to disable UOP Next and Previous for my Stories.
    I know that some DVD players "cheat" and allow the user to jump between clips and Tracks even if the navigation is properly set up.
    Am I missing something here? Any tips are gratefully appreciated.

    I figured this is what I have to do... too bad I didn't realised this when the project was still in develop... :-/
    And sure, all the Tracks have their End jump set, and a Menu call set, too. The Title button is also set for the project (jumping to the title menu, accoring to which language choosen after First play).
    And why the heck are the manufacturers making DVD players that does not follow the DVD standard???

  • Problems with using old web service project with new WLS/OEPE install

    I developed a java web service two years ago using WLS 10.3.3 and OEPE. After development I checked the workspace into Subversion including the .metadata directory. The web service was deployed to a production WLS box and is running fine.
    Now I have a new Windows 7 desktop computer. I have installed WLS 10.3.3 and OEPE on my new desktop and am trying to get the web service I wrote two years ago to run locally. When OEPE launches I point the workspace to the workspace project directory (from two yrs ago) that I have just checked out from Subversion. However when the OEPE IDE comes up I have many errors in the java code. Pretty much every java class is flagged with a "cannot be resolved to a type" error.
    Also, when I try to create a new server and domain, I have a problem there. I select "Oracle WebLogic Server 11gR1 PatchSet 2" as the server type, click Next on the wizard, but then on the next window where you select the Domain, the Domain Directory is disabled and will not let me enter a value, and the link to allow you to create a new Domian is not visible.
    Feeling kind of stupid as this should be really simple to do. Am I proceeding correctly by saving off the entire workspace and then trying to use that workspace in the new WLS/OEPE install? Any help would be greatly appreciated.

    Have you tried creating a new workspace, then import the project from your subversion workspace?

  • Using old power point plug  with new computer

    I have just bought a Macbook in new york and forgot to get an adapter from a USA(2 straight prongs) to UK (3 chunky prongs)power point. Can I slide off the powerpoint plug from the adapter on my 5 yr old ipod and put it onto the adapter for the new computer.?

    If you are going to stay in Europe a while, you can also buy a plug with the right prongs at the Apple store. It fits right into the brick and becomes part of it like your US one does, and you can change them back and forth. They're a little pricey - I paid 35 Euros for a Central European plug - but to me it's better than the adapter because it sparks less and looks much better.

  • Problems using M Audio Fast Track with Garageband

    According to the blurb, the M Audio Fast Track (USB) 'is class compliant in Mac OSX offering true plug-and-play operation. Just plug in, and you're ready to start recording'. This is why I bought it, but I am experiencing no end of problems actually getting it to register with Garageband '08.
    The problems are (a) I cannot hear any sound coming 'through' the Fast Track and Garageband (b) I can hear the guitar if I plug the headphones into the Fast Track, but nothing is recorded in Garageband (c) my mic, which is plugged into the line socket intended for guitars because I don't have the larger connection, reports no sound at all.
    Any ideas, or tips to how others have managed to set up this 'plug-and-play' device would be greatly welcomed.

    Did you ever get this to work? I just today bought a Fast Track Pro. I have it hooked to my MBP via USB. I can see in control Panel two inputs:
    M-Audio Fast Track Pro UDB: Line Input
    M-Audio Fast Track Pro UDB: S/PDIF
    Problem is, there is no sound registering on the Input Level on either choose.
    I have the Power On and have tried both Input 1 & 2, bith in stereo and mono mode.
    (Just to be clear, I connect the electric guitar directly to the Fast track pro, correct?)
    I have read the owners manual but it is worthless. I thought this would be easy to set up.
    Also note that GarageBand preferences the Audio Output and Input are selected to Fast Track Pro.
    What am I doing wrong?

  • FFT implementation without using inbuilt FFT function provided with labview

    Hi,
    I am very new to labview ,I have to implement FFT on NI Node WSN-3202.No fft inbuilt function on WSN target is there to do so.Please anyone give me some idea to implement FFT without using fft function in labview.
    Thanks

    Hi rita,
    when all you need is "some idea" I would suggest to read the Wikipedia article on FFT...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Using old Macbook Pro Adapter with new Retina

    I have a 2008 Macbook Pro (15") that I've got about 2 additional power adapters for situated at various locations. I JUST bought a brand new 15" Retina Macbook Pro and would like to reuse the power adapters on it.
    Is this possible?
    Physically the magsafe plug won't fit but isn't there an adapter out there?
    What's the wattage restrictions on this?

    Hi zamboknee,
    This can be done with the MagSafe to MagSafe 2 Converter, which can be purchased at the link below. Aside from that, MacBook Pros still utilize 85 W input, the same for both MacBook Pros.
    MagSafe to MagSafe 2 Converter
    http://store.apple.com/us/product/MD504ZM/A/magsafe-to-magsafe-2-converter
    Regards,
    Allen

  • Export/Import the mapping value used in Value Mapping Function

    I used value mapping function, so I defined some mapping data at Integration Directory. now I need migration from development xi to production xi, so How to export the data I input at development xi and later import it? or anyone could provide other solution for replacing value mapping function?
    Hope from your helps
    Thanks
    Spring
    Message was edited by: Spring Tang
    Message was edited by: Spring Tang
    Message was edited by: Spring Tang

    Hi Spring Tang,
      You can export your mapping object in .mte format.
      For this press ctrl+shift and right click in the
      mapping editor. Then go to tools and export the same.
      Similarly you can import the mapping object.
      Hope this will solve your problem.
      Thanks and Regards
      Vishal Kumar

  • Map functionality in interactive planning using PC MILER instead of IGS

    Dear Experts,
    We would like to utilize the map functionality in TPVS interactive planning, We have implemented PC MILER for Geo coding instead of IGS and GIS tools.
    The PC MILER is using the customized solution for calculating of  the distances of Geo co-ordinates using the defined precession level.However we would like to utilize MAP functionality in interactive planning through PCMILER. Just FYI PC miler is connected through http connection (RFC connection type G -http) unlike the RFC connection for IGS and GIS.
    I have configured all the relevant settings that are  required for using the MAP functionality in interactive planning. However the  VS optimizer is giving the error message as "no map available ". I also did a test run using the standard map test program, I got a short dump. But the PC MILER connection and other setting seems to correct.
    Please advice if anyone came across similar integration issues, or have any insights on this issue?
    Thank you,
    Ramesh.

    Dear Experts,
    We would like to utilize the map functionality in TPVS interactive planning, We have implemented PC MILER for Geo coding instead of IGS and GIS tools.
    The PC MILER is using the customized solution for calculating of  the distances of Geo co-ordinates using the defined precession level.However we would like to utilize MAP functionality in interactive planning through PCMILER. Just FYI PC miler is connected through http connection (RFC connection type G -http) unlike the RFC connection for IGS and GIS.
    I have configured all the relevant settings that are  required for using the MAP functionality in interactive planning. However the  VS optimizer is giving the error message as "no map available ". I also did a test run using the standard map test program, I got a short dump. But the PC MILER connection and other setting seems to correct.
    Please advice if anyone came across similar integration issues, or have any insights on this issue?
    Thank you,
    Ramesh.

  • Using aggregate function along with for all entries: sugest alternative

    My requirement:
    For each record in i_vbap for which 'charg' is initial, need to determine batch using the following logic:
    For the material (MATNR) in i_vbap, select the batch (CHARG) which has the largest (MAX) unrestricted inventory quantity (CLABS) from MCHB table.
    How do I implement this logic without using select statement inside a loop as I cannot use MAX ( CLABS ) function along with FOR ALL ENTRIES in a SELECT?
    Suggest an alternative.

    For each record in i_vbap for which 'charg' is initial ,fetch all the existing 'clabs' value.
    [ Remember to include all the key fields in selct ]
    Sort the new table .
    Put a loop,use at end of 'charg' and append to another table. U get ur solution
    I think this should be the most economic way to do so.

Maybe you are looking for