Using old modem as airport express

i am thinking of getting an airport extreme and was wondering if i could use my old netgear modem to act a an airport express, having one upstairs and one downstairs, extending the range and signal of my network. Thanks in advance.

was wondering if i could use my old netgear modem to act a an airport express, having one upstairs and one downstairs, extending the range and signal of my network.
Yes....if you connect the AirPort Extreme and Netgear router using a wired Ethernet connection.
No....if you try to connect the AirPort Extreme and Netgear router using wireless only.

Similar Messages

How many users or devices does an old 802.11g airport express support?

I've got three old 802.11g airport expresses that make up my home network. One is my base station hooked to my cable modem. the second I used as accss point for my satellite tv box. The third is hooked up to my stereo. I have an ipad, macbook, PC and a doogle plugged into my flat panel tv. I usually don't have my mac and PC on at the same time but I have lately and I lose the network connection on both machines. I can't reconnect on either machine. My base station goes yellow so I unplug it a few minutes and plug it back in. Then everything is find if I only have one machine. I assume my trouble comes from trying to put too many devices on the network, right? If I buy a new airport extreme, will it work with my old airport expresses? Or what's the solution to my network problem? Thanks.

Hi - first of all is the base station solid yellow or blinking yellow - if it is solid then there is an electrical problem - if it is blinking then there should be an error message in the Airport Utility - each Express can handle 10 wireless clients - the base station can administer 199 internal IP addresses so I don't that the number of users is an issue - it sounds like a connection conflict - however to address you second question, you are using old technology with new technology now - so to use a new Extreme with old Expresses would be defeating your purpose - in my opinion instead you should get 3 new Expresses - $99x3 and you would be getting a fast new system - or $180 for a new Extreme and still have a slow system - but if you want 3 gigabit ports and the ability to connect a hard drive in a base station then an Extreme and 2 Expresses is the ideal solution - and I fully understand the economics involved so the choice is yours - if I have caused you to have more questions, please ask.

Connecting wireless modem and airport express

I currently run internet with an old Motoirola Sideboard cable modem and Airport Express - previous version. All runs well. Now my Optus provider has upgraded my service with a Premium account for higher speed. They have also given me a free wi fi Cisco modem - DPQ3925. How can I replace my old Motorola modem and still maintain Air play etc with my new modem using Airport Express. I need to know exactly wire per wire help - please, if possible - Thanks
Mac

Hi - I have a similar issue.
I have a new macbook pro, ATV (3rd Gen) and AXn (purely for Airplay of itunes).
All three are wirelessly connected to my HG556a Huawei WiFi Router.
The Macbook pro and ATV work fine and can see each other for airplay mirroring and itunes.
The AX connects and comes up in Airport Utility (AU) and itunes shortly after you turn it on, but if you either dont use it or stop using it and switch to ATV or whatever it dissapears from itunes and AU says it cant find it. Randomly the light on the AX stays green the whole time.
I have to switch the AX off and on to get it back working again (i.e. itunes and AU can see it).
Following other forum posts I've set the AX up by hard connecting it to my router, setting a static iP and reserving ports 5353 and 3689 to that address. I've also turned off ipv6 or whatever using the networksettings Terminal code string. I have also repaired permissions with disk utility!
It still dissapears from available options in iTunes and AU. ideas?

TS4597 I am using an Airport Extreme as my base station and I want to extend its range using a recently purchased AirPort Express. However neither device is showing up on my AirPort Utility on either my older MacBook Pro or my IPad 4. What do I do?

I am using an older AirPort Extreme as my base station and I want to extend the range by using a recently purchased AirPort Express. When I try to find either device using the AirPort Utilities function on either my new IPad 4 or my older MacBook Pro neither device is detected. However the utility is seeing that we are connected to the Internet which is through the Extreme. What am I doing wrong?

For now, leave the AirPort Express powered off.
Power off the entire network....all devices.....in any order that you want
Wait a few minutes
Power up the modem first, and let it run 2-3 minutes by itself
Power up the AirPort Extreme next, and let it run a full minute
Keep powering up devices one at a time about a minute apart until everything is powered up (leave the Express off for now)
Open AirPort Utility and check to see if the AirPort Extreme is visible.
If it's not, click the AirPort Utility menu at the upper left of the screen, then click About AirPort Utility. Post back with the version number of AirPort Utility that you see there....which should be AirPort Utility 5.6.1.
Post back on your progress.

How do I use a Mac Mini + Airport Express + Time Machine disk to backup another iMac

How do I use a Mac Mini + Airport Express + Time Machine disk to backup another iMac?
The question pretty much says it all.
I have a Mac Mini with an attached 3TB Hard Drive used for Time Machine Backups.
I have an Airport Extreme base station which services that machine plus several others.
I would like to backup my new iMac and a MacBook Pro to the Mac Mini.
What do I need to do on the mini to export that hard drive so that it can be used as a Time Machine target from the other systems?
All systems are running 10.6.8.

Well you would have to do backups over a network which is much slower and has highest chance of becoming corrupt. I think your best option would be to get an apple time capsule to act as a network and back if thats how you wanna do that

Best cable to use to connect an Airport Express to a Sony DE 1075?

Hi, Does anyone have suggestions on the best kind of cable (RCA etc) to use to connect an Airport Express to a Sony DE 1075 receiver (the receiver was purchased about 10 years ago)...I have the receiver hooked up to a Bose Acoutimass 15 sound system. Thanks,

If you plan to use the AUX input on the Sony receiver, then you will need a cable that consists of a 3.5 mm Stereo Mini plug on one end and 2 RCA plugs on the other.
The RCA plugs are almost always color coded red and white to designate the left (white) and right (red) channel.
Any electronics superstore will have what you need, as will the Radio Shack.
If you are still not sure what you need, take a picture of the back panel of the Sony receiver using your camera phone and take the AirPort Express with you to the store.

Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network?

Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network? (IE: 2 LAN ports)
I haven't been able to get a clear answer on this. I believe the 1st generation would act as WAN/LAN depending on setting, but what happens with the 2nd generation?
Thank you for your time.

If the Express joins a wireless network wirelessly, in other words its WAN port isn't connected to anything, the correct way to connect a wired client to it is by using its LAN port.
I don't know what would happen if you were to connect a wired client to its WAN port instead — it's just not supposed to be used for that purpose. It won't permanently break anything if you were to try it though. If you were, the worst that would occur is that your network would become unresponsive as packets continuously traverse its WAN port in a circular fashion, which might require that you power down your router to reset your whole network.
If you are already using your Express's LAN port and you need another, the way to provide more ports is to purchase an inexpensive ($10 or so) switch. Connect it to the LAN port and as many other pieces of equipment as the switch's available number of ports.
You're correct about the first generation with the single Ethernet port. It could be used in either capacity depending on its configuration.

How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

Sorry, but it is not possible to "extend" the Guest Network using either wireless or an Ethernet connection.

No preferences for Epson R1800 when used direct or via AirPort Express

I have recently purchased a MacbookPro. I have plugged in my R1800. I have installed the latest drivers from Epson's website. I have also followed instructions on this forum saying to reset the printers and reboot. Then install the drivers again.
I can print on my R1800 either by plugging it in direct or using it through the AirPort Express but it only prints in very low quality. I cannot get into and printing preferences to select paper type, print quality......etc.
Does anyone know what the problem is and how I can solve it. It's driving me crazy!

Don't worry, i've sorted it. Updated the software for the AirPort Express an it's all working lovely. Nice bit of kit when it's working. Wish i'd updated the software a couple of hours ago.

Using TimeCapsule with a Comcast modem AND Airport Express. Way slower after updates! What's up?

I've been running this set up for two years now without a hitch. Comcast Modem to TimeCapsule by Ethernet. Then TimeCapsule to Airport Express via WiFi. It used to work great because my TC was far away from my family room and the AE extended my network flawlessly.
After Mavericks and IOS 7.06 installations on my devices (iMac, Macbook Air, iPhone, and iPad) my wifi seems to be moving at half speed. I've rebooted the Comcast Modem and TimeCapsule. I guess I should reboot airport express as well. But I doubt thats the problem. I was thinking of asking Comcast to change out Modems but this is a new problem only since updates. What should I do?
Any ideas?
Thanks
Marylyn

Power off the entire network.....all devices....computers, printers, modem, TC, mobile devices, etc
Wait a few minutes
Start the modem first, and let it run a few minutes by itself
Start the TC next and let it run a full minute
Keep starting devices one a time about a minute apart until the entire network is powered back up
Check the network

What to use as an ADSL modem for Airport Express/Extreme?

I am in the UK. My broadband comes down the telephone line. What modem should I use to connect to an Airport Express or Airport Extreme router?

My ISP is Demon, which is now owned by Vodafone. I telephoned Demon and was told (a) that it only supplies the Technicolor TG582n as a courtesy (b) that it supplies no other hardware (c) that I might be able to make the TG582n work in bridge mode but that Demon provides no support for that - meaning no help or advice either (d) that any router bought off-the-shelf in the UK which supports ADSL 2+ will be compatible with Demon's service and (e) that any modem which supports ADSL 2+ should also therefore work. Pressed by me for the names of routers that other clients of Demon's use, I was told that these included routers manufactured by Netgear, Cisco and Draytek but that this is not an exhaustive list.
In summary, Demon says that any off-the-shelf modem that supports ADSL 2+ should work.
To return to the question that I first asked, therefore, I would be grateful if anyone can give me the names of any ADSL 2+ modems which work optimally with Airports Express or Extreme.
If anyone reading this post has any experience they can share, that would be very kind and much appreciated.
If any ADSL 2+ modem will do as well as another, it would be helpful to know that also.
David

How best to use TWO Time Capsules, Airport Express and Apple TV?

Hello
I have the following Apple equipment and am wondering how best to plug it all together. At the moment I am not using some items at all because I do not know how to best use!
1. MacBook Pro (2012 model) 'Mac1'
2. MacBook Pro (2009 model) 'Mac2'
3. MacBook Air (2011 model) 'Mac3'
4. Time Capsule 1TB (model A1355) 'TC1'
5. (another!) Time Capsule 1TB (model A1355) 'TC2'
6. Airport Express (2008 model)
7. Apple TV (2013 model)
8. LaCie 1TB USB Hard Drive
9. Apple iPhone
10. Sonos system
CURRENTLY
TC1 is plugged into the Virgin Media modem to provide a WiFi network called 'Amer's Apple Network' around the house. The Virgin Media wifi has been switched off to reduce interference.
TC2 is not being used. The Airport Express is plugged in upstairs (or sometimes near garden) to extend the 'Amer's Apple Network' and this seems to work fine.
Apple TV is plugged into main TV and is plugged into 'Amer's Apple Network' directly using Ethernet to TC1 but often runs slowly and does not work if Mac1 is not awake (or iTunes is not running on Mac1).
LaCie is plugged directly into TC1 and currently has a old copy of my iTunes library stored on it which my Sonos system access. However, there seems to be a problem in that iTunes randomly uses that LaCie library and/or local Mac library. Often we get a pop up message on Mac1 saying "Library cannot be found" and we have to manually navigate to the LaCie drive (via the TC1 folder) to open iTunes. Also connecting iPhone to Mac1 seems to work very slowly as it appears to be trying to back up to LaCie drive.
QUESTION
What would be the best, most efficient way of using all (or if some is redundant equipement then which), to set up the following:
1. A shared home network which enables all three computers (and any future Macs and/or iPads etc) to access one master shared iTunes library, which is the one that is updated with any new music, films etc added via any of those machines
2. A shared home network that enables a shared files folder but also allows each user to keep their own personal hard drive (eg locally on whichever machine they are using).
3. A fast (as possible) iTunes back up process when connecting iPhone to computer
4. Usage of both TC1 and TC2 (and Airport Express) to extend network around the house (several weak spots exist) and also to maximise storage using the 1TB of each TC1 and TC2.
5. Would it then also be possible to attach the LaCie USB drive for an additional 1TB storage? If so how and would it be very slow? From existing usage it appears to be very slow when used as a regular access drive, so perhaps better as a 'slow' drive that is just occassionaly used for back up and nothing else
Main question is (to the networking experts!), how would you personally set up all above to give best wifi coverage, fastest back ups, access to Sonos for iTune library, access to Apple TV, and shared folders etc etc. I basically seem to have lots of kit (albeit some quite old) and nothing seems to be working together particularly well.
Happy also to ditch any bottlenecks in the above equipment list (eg LaCie USB drive?) and add something which would better bring together the other components?
Any thoughts much appreciated!
Best
Amer

So ... FINALLY ... I found some time to implement this!
Steps taken and results:
1. Moved my entire music library to Mac1. Used the opportunity to also share my other Mac2 onto HomeShare and copy across any music files from Mac2 onto Mac1 that were not already there.
Result: Mac1 now holds my whole music library locally. Works incredibly fast whenever playing a track, adding a new track or updating info on existing track. Good!
2. LaPastenague's instructions for bridging TC1 with TC2 worked a dream. Only thing is they are basically next to each other as I don't have the energy (or cabling expertise) to install (cleanly) long runs of ethernet cable.
Result: Got a clear Wifi signal, not sure if any faster than before but I assume two TCs next to each other both sending out the same network signal can't be any worse than one. Main thing is that I have an extra 1Tb network drive (i.e. TC2) connected to TC1 which I can access from all my Macs now.
3. Copied the entire Mac1 Music library over to TC2 drive into the Data folder. This happened relatively quickly (I think!) ... but would welcome any comments on whether slower than expected, to highlight if I might be able to improve the connection. 12,000 songs in 2 hours, with Mac1 sending the files to TC2 wirelessly. I know I could probably have connected Mac1 to TC2 by ethernet cable to speed up, but I had run out of Ethernet cables by now!
Result: All my music (as of today anyway) now on Mac1 AND on TC2 in normal readable format (i.e. by Sonos and as a simple back-up that can just be carried around and copied anywhere in the event of loss of Mac1 drive
4. Set up TC2 Music Library in Data folder to be the networked music folder for Sonos using "\\TC2\Data" (ps. why doesn't Sonos allow a simple click and select option for choosing drive and instead force us to go back to the 80s and type in drive path which isn't always clear, especially on a Mac!)
Result: Sonos can access all my music (as of today anyway) on TC2 and no need for Mac1 or any other Mac to be open.
BUT: As you may have guessed, the issue with the above set up is that as soon as I buy a new song, it will get added to my Mac1 quickly and smoothly ... but the area where I really use my music (i.e. Sonos via TC2) will have the older music library.
QUESTION: Is there any way in which I can adjust the above set up, so that whenever I add new music to my Mac1 it also copies across to TC2? Don't mind if this is done slowly and later (eg in middle of night) but of course don't want to have to copy across manually each time. Would prefer it to just update newly added tracks regularly.

Which Admin Utility version for old 802.11g Airport Express?

Which version of the Admin Utility should I use for my Airport Express which is about 5 years old, maybe more?
And what about firmware updates? I have Windows XP.
My Airport uses 802.11, 802.11b and 802.11g, not the current 802.
Currently I have Admin Utility version 4.2.
The Airport won't recognize my networked hard drive and my only hope is to update the software.

I believe WDS won't halve the bandwidth on the master, only on the slave (which won't matter, because it will be more than fast enough for airtunes). And the extreme will be faster than your modem anyway, even if the bandwidth were to be halved. Unless you've got some seriously fast contract. But in any case, I doubt it will work using one of the other methods. I had this problem in the past (as it happens, my b/g AE died, and I now have two n units, connecting using 'join'), and I wasn't able to make it work using something other than the WDS option. But you could always try yourself of course. If you put your b/g AE on ebay and buy a b/g/n unit, you'll be able to use the join and extend options.
Btw, you don't have to disable the WAN port on the express, because it actually isn't only a WAN port - it works both ways. You could connect it to a blu-ray player that wants to connect to the internet for example, or any other device that has an ethernet port.
But yes, you have to connect to both routers together, as one network is what you want. And to answer your last question, I'm pretty sure that airtunes will first go through the extreme, an then to the express. But why don't you set it up in WDS mode and see how you like it? I certainly had no problems with it when I had the b/g AE.

Wireless modem and Airport Express.. one at a time

Recently my internet provider upgraded my old plug in modem to a newer wireless model. Now it seems that the current setting allow communication with only one or the other at the same time. If I want to be online with the wireless modem and send my iTunes music via Airport Express to my sound system, no dice. I have to either click on the modem up in the Airport choices to be online and listen to iTunes through the computer speakers, or go offline to listen to music through the sound system and Airport Express.
I'm sure I'm just missing something in preferences or settings somewhere.
Can someone point me in the right direction?
Thanks, and Happy New Year!

No ideas?

Vonage between cable modem and Airport Express is a problem

I have my Comcast cable modem connected via Ethernet to the Vonage box which is connected via Ethernet cable to my Airport Express. When I try to connect wirelessly via my Powerbook it's a crapshoot whether or not I can connect to the internet. Mostly the quality is very poor if you can connect at all. If I cut the Vonage out of the equation hooking the cable modem to the Airport Express it works perfect. So Vonage is my problem and I need to change some settings either with my computer or my Airport Express, but which ones? I've been given several different ideas from the information I've sifted through (i.e. change the DNS, change the sharing prefs, get a hard wired router). Oddly enough an old HP computer I have in the basement connected to the internet via another Airport Express has no problems with connection at all. If someone could let me know which of these fixes I am preparing to try would work the best I would appreciate it.

Interesting. So you have two Airport Express devices configured into a WDS, with the one upstairs functioning as the main base station and the one downstairs functioning as a remote base station. And your PC downstairs connected to the remote base station has no problems connecting to the internet. Is that PC cabled to the Airport Express, or does it connect wirelessly to the remote Airport Express?
What happens if you bring the Powerbook downstairs to where the PC now resides. Does the Powerbook then get the same great internet connection as the PC?

Using old modem as airport express

Similar Messages

Maybe you are looking for