Using one Message Interface for all mappings

Hi Folks,
I am using a BPM in which i m getting a file from file system which have system ID in it.
I am having three send Synchronous step following that.
What i need is to use the Message interface for file to be used for receiver determination based on system id in case of Synchronous interfaces.
DO i need to include this File msg. interface in each mapping, if i do so will it be possible to send req. and get response for synchronous call.
OR is there any way to to use the file msg. interface for each mapping.
we are on SP17,I also tried Extended mapping but i am having SYNCHRONOUS send steps.
Plz help me out
Sachin

Bhavesh
<i>1. You receiver a file in your BPM . This has a field called SYSTEM ID?
2. On the basis of the System ID field you need to determine the Receiver to which the Synchronous Request message has to be sent?</i>
Sorry for that...because I was confused with jai's ans.. that's why said like that
<b>You are absolutely correct</b>
This is what i want to do.
i can't use switch step here. my BPM looks like this
RecFile->sync send->transformation1->transformation2->sync send2->transformation3->BLOCK
in BLOCK
Sync Send3->transformation4 and so on...
I am using three different Sync ABS Interface for each Sync send steps.
In receiver determination i want to get the data from respective R/3 system based on system ID i.e. logical system in File MI.
Say if it T90CLNT90 then get data from BS_SAPR3_4.6 else from BS_4.7
Sachin
Message was edited by:
Sachin Dhingra

Similar Messages

HT204053 Our family uses one Apple ID for all of our iPhones. We installed the update and now we are all getting each others photos and texts. How do we stop this?

Our family uses one Apple ID for all of our iPhone 5's. We installed the update and now we are all receiving each other's pictures and texts. How do we stop this?

Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

HT4436 My family has multiple iPhones. Can we use one Apple ID for all of our phones?

My family has multiple iPhones. Can we use one Apple ID for all of our phones?

If you use the same AppleID for iMessage and iCloud though, you will all be sharing the same message account and iCloud email account. You can use a common AppleID for purchased content, but each create your own unique AppleID for iMessage and iCloud so you each have your own private accounts for those services.

HT1660 how can I use one single library for all users on the same laptop?

how can I use one single library for all users on the same laptop?

You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

Publication using "one database fetch for all recepients" is a failure

Hi,
I have created a Publication in *CMC* with Crystal Reports as Source Document. When I schedule it with option " One database fetch per recipient" it is a Success. But while using the option "One database fetch for all recipients" it is a Failure.
I tried this with Personalization value Parameter as well as Filter. But both combinations throw an error message when used with Reporting Bursting Method "One database fetch for all recipients".
Anybody who has worked with Publication please let me know in which scenario one can use the Advanced setting:
Report Bursting Method
"one database fetch for all recepients"
Regards,
Amogh.

Howard,
The method I use is to put the connection script in a file outside the web root. Although the file has the same name on both the local and remote servers, the details are specific to that particular connection. Then each page in the website has the following PHP script.
require_once '../outside_folder/.db.php';
This method is also more secure than including the connection details inside the web root. Also note that the file name begins with a period and ends with the php extension, both for added security.

Publication using 'One database fetch for all recipients' is a Failure

Hi,
I have created a Publication in CMC with Crystal Reports as Source Document. When I schedule it with option " One database fetch per recipient" it is a Success. But while using the option "One database fetch for all recipients" it is a Failure.
I tried this with Personalization value Parameter as well as Filter. But both combinations throw an error message when used with Reporting Bursting Method ""One database fetch for all recipients"".
Anybody who has worked with Publication please let me know in which scenario one can use the Advanced setting:
Report Bursting Method
"one database fetch for all recepients"
Regards,
Amogh

Howard,
The method I use is to put the connection script in a file outside the web root. Although the file has the same name on both the local and remote servers, the details are specific to that particular connection. Then each page in the website has the following PHP script.
require_once '../outside_folder/.db.php';
This method is also more secure than including the connection details inside the web root. Also note that the file name begins with a period and ends with the php extension, both for added security.

"securely" use one ethernet interface for WAN and other for the LAN

I am reconfiguring our dual 2.7 Intel Xserve running MacOSXServer 10.5.4, and had a question.
Is it possible (or advisable) to use en0 to perform LAN services, and then configure en1 to only allow access to very limited service. VPN, FTP, CALDAV and later Mail.
I imagine that this is possible via a firewall configuration, but first I do not know how to specify interface in addition to ports, and second I don't know how advisable this would be.
Currently I have a DSL package from ATT with 5 static IP addresses. I have an Airport Extreme set up as one of those addresses providing DHCP and NAT to the LAN. I am using the LAN ports on the back of that to bridge my three switches (2 managed [clients and oce print server 100 base-T] and 1 unmanaged [ laser printers and copier 10 base-T]).
I have the LAN based on 192.168.0.x, with the Xserve at 192.168.0.5. I have DNS configured and working (Thank you Antonio Rocco)
I have 20 LAN clients, 18 mac 1 PC and one PC via Parallels. I will have no more than 1 or 2 WAN clients at any one time
I provide AFP, SMB, Directory Services currently. As part of the reconfigure, I desire to take better advantage of the collaboration tools to provide wikis and CALDAV services. I also want to allow our employees to publish their individual calendars, so that they can subscribe to them at home, or vice versa.
I would like to configure VPN, one for me to access configurations when I am away using Remote Desktop (I have used command line to some extent, but still feel more comfortable with the GUI tools) and second for limited access to content for certain users.
It would also be very helpful for us to have a FTP site. It is unnecessary for this the be a FQDN service, sending the IP address is perfectly acceptable as we only use a service like this 10-15 times a year.
(Related but unimportant in the grand scheme, is there a way to generate a link to the FTP server that you could email that not only is a link, but also a temporary username and password?)
Thank you in advance,
Ion Webster

First, I missed a zero in the network speeds, I have two managed GbE switches that have all of the GbE capable machines connected to them, and an unmanaged GbE switch that has all the 10 or 100Base-T connections. My apologies for the mistake. That was one of the reasons I went with the GbE capable Airport to bridge the switches.
Ok, I had been leaning towards a separate hardware firewall, but here is also where there is a hole in my knowledge. Do I need to look at something like the Linksys RVS4000 which bills itself as a +"4-Port Gigabit Security Router with VPN. Secure, smart Gigabit networking for growing business"+ I would like easy configuration, as I take care of these systems in addition to my job, rather than full time. This will be the first time I have set up a VPN connection, so even though I have spent a lot of time researching the manuals, and reading Schoun Regan (Apple Training Series) I don't have real world experience here. So if I buy more hardware, I want it to be the product that will provide the protection, and also allow me to configure it so that I can get these services running. All my VPN clients are running Macs, most on an AIrport connection and have their IP ranges in the 10.0.1.x range. all but one is on OS 10.5.x so I have a fairly homogeneous set of machines to make work together.
I will review the links you provided regarding static routing, but I do believe the hardware solution is a better one, and wish to pursue it, for all the reasons you give, and that in the brief perusal of the links, it is more than I want to tackle.
As far as FTP vs sFTP, I have no preference. I simply want a way to have online storage for transfer of large files on occasion. Ideally I want a folder, or a series of folders that are accessible for my LAN users to put items in and take them out, and for my (s)FTP users to do the same
So long story short, the hardware solution I would like to purchase, I need to be able to do the following:
VPN connections for content access and ARD access ( knew about and will ensure differing IP ranges)
(s)FTP
Calendar publishing
mail(at a later time)
Thank you for your help thus far.
Ion Webster

CcBPM - How to use 1 Message Interface for 2 different Business System

Hi,
I have this bpm scenario below :
JDBC QUERY (ASYN) ---> RFC (SYNC) -
> JDBC INSERT (ASYN) -
> MAIL (ASYN).
So Both JDBC INSERT and MAIL using the same data input from RFC response for instance i will named as MI_RFC_RES_ASYN_ABS. I have problem to configure in the integration directory, how make the xi smart enough to routing in the correct business system.
JDBC -
> BS_JDBC and MAIL -
> BS_MAIL base on the send step in BPM because the interface is the same.
Cheers
Fernand

Hi,
If you want to send the same mesg to diff systems and also need to have the control on seq,
then define 2 diff abstract interfaces for messages going out of BPM (with same message type so that structure is same).
One will be used to define send step for JDBC and other for BPM.
Define 2 send steps in BPM one for JDBC and other for mail using these abstract interfaces.
Now you will have 2 receiver determinations.
Since recr is determined based on sender system interface name and name space,
system name ( BPM ) and name space will be same for both the messages going out of BPM.
for JDBC abstract interface BS_JDBC will be recvr.
and for Mail abstract interface BS_MAIL will be your receiver.
hope it answers your qn.
Regards
Pushkar

Should I use one (1) password for all my password requirements or vary them?

Hello. At present, I have many different passwords for various password requirements on my iMac. Would it be possible to use only
one strong password instead for ALL my needs? Thanks for any input on this.

Thanks very much everyone--sorry I can only give 'this helped me' points to the first couple of answers, doesn't look like I can give out any more. Also I will put a 'this solved my question' on after I wait for a few more replies, if they should come in.
I have been using MANY passwords, actually about 3 pages of them I keep written down, but thought I was being paranoid! By the sounds of it I should keep up with what I am doing even though it is a bit cumbersome.
There is a program called 1Password but the cost is a bit prohibitive and I have found in the past that I pay and download some of these programs and then find I cant understand completely how to use them, so for the time being I will continue with what I am doing, thanks to your input.
I did read somewhere that a strong password would be a series of statements that meant something to you--for example 'Ilovetopasstimeonmymac' (I love to pass time on my mac). I have also read that putting a # sign in with the characters and numbers has merit.
Again thanks for your input, I appreciate your time and expertise. Cheers.

How to use one WAD template for all the available queries

Hi,
I have created a WAD template... Now we have close to 25 queries which will use that template for displaying their output at Portal...
Is there any way that i don`t have to create multiple copies of my WAD template...
I.e. all queries would call that same template through portal...

Hi,
The Bex report uses the Standard Template 0ANALYSIS_PATTERN while it is executed.
So if your sure that the look and feel of all the Reports is going to remain same, you don't need to even attach all these Queries to Templates in WAD.
When you execute the BEx query, it would pick up the standard template and run it in portal.
But if you want to customize the Report Template:
1) You can change this standard template 0ANALYSIS_PATTERN and customize it according to ur requrement in WAD.
2) Or you can create a copy of this standard template and change it as required. Then change the template in spro (transaction RSCUSTV27) to point to this Z template.
Let me know if you need more details.
Regards,
Forum

HT1349 I have just bought Ipad 2 32gb -WiFi -3g can you tell me do I just use one Apple Id for all different section that need ID & password - I Cloud

I have just bought an Apple Ipad 2 32gb - Wifi -3G my question is do I use the same ID e-mail - Password to start a new Account with I Cloud

Not quite sure what you are asking... But, See Apple ID here...
http://www.apple.com/support/icloud/getstarted/

My messaging works for all of my contacts, using iphone or android, except one. Any ideas why?

My messaging works for all of my contacts, using iphone or android, except one. Any ideas why?

First thing I would expect is a wrong number. Second might be something at the recipients end.

HT204053 The entire family has used one itunes account for years. How do we all set up separate iCloud accounts now?

The entire family has used one itunes account for years. How do we all set up separate iCloud accounts now? Or should we? 5 macbooks, 2 ipads, 4 iphones, 2 itouch, 2 imacs. How does one decide what to sync, share and what not to? Green Jeans.

You need to start by understanding the distinction between iTunes and iCloud - Apple confuse the issue by referring to 'iTunes Match' as part of iCloud. It isn't.
You don't have to have the same login (Apple ID) for iTunes and iCloud; many people don't and there's no problem about it.
Your iCloud ID gets you email, calendars, contacts, iWork documents and PhotoStream syncing between devices.
Your iTunes ID gets you the iTunes Store, the App Store for iOS, the Mac App Store for OSX,, 'iTunes in the Cloud' (downloading of purchased items to any logged-in device) and 'iTunes Match' (uploading of songs not purchased in the iTunes Store).
Your family members can easily each get their own iCloud account to keep email etc. separate - in each case they will need a different non-Apple email address (a free one from Yahoo etc. would do) to set up the ID. If they are sharing a Mac they need to be using a separate user account.
They can have their own iCloud accounts and still all sign into the same iTunes account: or they can open their own iTunes accounts using their new iCloud Apple IDs.
BUT they cannot transfer items purchased under the present iTunes ID to different iTunes IDs.

HT5622 I have been using one apple ID for my family as it makes it easier to manage itunes purchases/rentals on all of our devices. Now that my kids are getting old and my wife has recently purchased an Iphone, I can see that I need to change my strategy

I have been using one apple ID for my family as it makes it easier to manage itunes purchases/rentals on all of our devices. Now that my kids are getting old and my wife has recently purchased an Iphone, I can see that I need to change my strategy. I plan to add a few more iphones to the family very soon. What is your recommendation to manage all of our devices (iphones, itouch, apple tv) for my family? Can I continue to function with one apple ID or is it time to take the leep into attempting to manage multi-apple ID's?

There's a few ways of managing multiple devices on a single computer (and keeping seperate content on each). The following document is worth checking through:
How to use multiple iPods, iPads, or iPhones with one computer

HT201251 I want to use 30 ipads to run kiosk software in my restaurant. Can I use one Apple ID (and one credit card) for all devices

I want to use 30 ipads to run kiosk software in my restaurant. Can I use one Apple ID (and one credit card) for all devices?

Alternatively you can always manage your iPads (does not matter how many) with a single apple id and all reporting to your account under "find my device" service. Keeping an eye on all your units. Additionally as you mentioned these are for your Restaurant you may find the solutions offered by this company who creates apps and hardware for this purpose: http://www.spartakioskpro.com
Additionally if you expand beyond those 30 iPads to say 300 you will want to enable or plan on MDM as your best option to automate every ipad to use the same profile and app and ios configuration while also keeping a close eye on all of them via online MDM services like: https://meraki.cisco.com/products/systems-manager
Here is a pic

Using one Message Interface for all mappings

Similar Messages

Maybe you are looking for