Using one of the new WLS DAQ products on a rotating platform or something similar?

I am considering strapping one of the WLS DAQ devices, such as a WLS-9215, to a motorized rotation stage spinning at 1-10 Hz.
My main objective is to eliminate twisting/breaking wires without using slip rings.
Any experience or insight would be appreciated.

TEP,
Unless your spinning platform is quite large, I doubt you'll have a problem. The wireless DAQ devices use industry-standard 802.11x connectivity, which should be OK at the relatively low speeds you've mentioned. I agree that you'll want to test it when you get it, but I doubt you'll experience connection problems.
-Chad Bailey
Chad B. » National Instruments » ni.com

Similar Messages

Anyone using one of the new iMac intels with Logic Pro?

Hey people the title says it all really. Anyone using that particular combination? More specifically the newer Core 2 Duo range.
If so, how is it handling Logic and perhaps your 3rd party plug-ins? I used to have a Dual 1.8 gig G5 (see spec below) and that was pretty powerfull but unfortunately one of the processors died so I had to sell it on. Now I'm thinking of getting an iMac due its size and price.
Cheers and beers everyone.
Dual 1.8 G5 Mac OS X (10.4.3) 3 Gig ram,

yup
this has been asked and answered a lot - but i'll bite:
I've got a imac c2d 2.16 2gb ram and it flies. haven't got close to making it sweat yet.
been running upto 8 audio tracks with between 3-7 plugins a track, 2-3 + space designers, stylus rmx with 4/5 instances and fx and maybe 3-4 soft synths - e.g. 2+ absynths and a couple of logic plugins plus an ultrabeat.
dmitedly i am comparing it to my old powerbook - but really it flies and i'm occasionally aso running imovie in the background and surfing the web if the whim takes me.
I'd recommend at least 2 gb ram - but although i bought mine in feb with the full knowledge that a new imac might be introduced soon, i'd have to say wait....check out macrumors buying guide as it's long overdue for an imac new model.
hope that helps,
rounik

Tab Form LOV uses one of the other columns in that report.

Hi All.
i created a Tabular Form using the Wizard.
i want to change one of the columns in the report to be an LOV.
the LOV has a WHERE that uses one of the other columns in that report.
i tried to do something like that:
SELECT <display_value>, <return_value>
FROM <some_table>
WHERE <my_column> = #ANOTHER_COLUMN_FROM_REPORT#
it doesnt work...
anyone know how to do it?
thanks in advance
Alberto

See
http://htmldb.oracle.com/pls/otn/f?p=18326:54:::::P54_ID:1282
Also see the discussion at
http://forums.oracle.com/forums/thread.jspa?messageID=1222153

I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store

Can i use a 2010 24 led screen with one of the new 2012 macs with thunderbolt technology?

can i use a 2010 24 led screen with one of the new 2012 macs with thunderbolt technology?

Yes. Any standalone display which can be connected to a Mini DisplayPort, with or without an adapter, can be plugged into a Thunderbolt port without any additional adapters.
(65766)

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

Adobe Cloud has 2 different Muse programs.... how do I know which one is the newer better version?

So I am new to Muse, and my Adobe Cloud has 2 different programs from Muse... how do I know which one is the newer better version?
One Must program (Muse CC 2014.2) has a black background when working on it... it looks like other Adobe programs such as Photoshop.
The other one is light color (Muse CC) very similar to the black color Muse on functions.....
One of the difference I notice is that the light color Muse has a few widgets in the library, while the black background Muse seems to have an empty library
So... why are there 2 different Muse programs in my Adobe Cloud?

Hi
The latest version of Muse is 2014.2, so you need to uninstall another version of Muse manually.
regarding the items in Library, you can add items in your library manually, as shown in this article
Adobe Muse Help | Organizing and reusing design elements using Library panel
Please let me know if you have any other query.

I am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going of

i am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going off. Can some one help?

Hi Jay,
Be aware that "Freeze Header Rows" and "Freeze Header Columns" apply only to rows and columns that are Header rows or Header columns. You can have up to five Header rows, Five Header Columns (and five Footer rows) on a Numbers Table.
"Header rows" is a special designation. Besides being able to be frozen, Header and Footer rows are not included in formulas referencing whole columns, making it possible to place formulas such as =SUM(B) at the top (or bottom) of column B without causing a self-reference error, These designated rows are also not included in sorts of the rows in a table.
Regards,
Barry

I ran out of space on my time machine because I bought a new I MAC to replace the old one. So I copied the old one on the new one and in addition to that I own a macbook. So what should I do erase the old IMAC on my Time capsule ? Shall I reset it?

I ran out of space on my time machine because I bought a new I MAC to replace the old one. So I copied the old one on the new one and in addition to that I own a macbook. So what should I do erase the old IMAC on my Time capsule ? Shall I reset it?

Go to the airport utility and erase the TC disk.. a quick erase is fine and takes less than 1min usually.
A one pass erase takes several hours depending on how big the hard disk is.. but is somewhat safer in that it tests the drive condition. I normally don't bother for a TM backup.
When you start over you should be able to fit both backups on the TC.. assuming the disk is 2x larger at least than the space used on both the MB and the iMac.
If not you can also add a USB drive to the TC, and use that for one of the computers.
The slowest one is best.. as USB is slow.. but fast enough for wireless you won't notice much.

All plugins uptodate but on upload file get "USING one of the supported browser with latest Adobe Flash is required to experience enhanced file upload features

I am freelancer. When I tried to upload files on elance it give following error and disable the upload button:using one of the supported browser with latest Adobe flash is required to experience enhanced file upload features.
All plugins are up to date. Flash version 11.7 installed.

I assume Firefox 19 worked fine on the site?
Some sites may be mistakenly identifying Firefox 20 as Firefox 2, which is a very old version they probably no longer support. As a test, you could "lie" to the site about your Firefox version and see whether that little deception works.
This take a minute to set up. Here's how:
(1) Select and copy the following preference name to the clipboard:
general.useragent.override.elance''.''com
(2) In a new tab or window, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(3) In the filter box, type '''override''' and pause while the list is filtered
(4) Make sure '''general.useragent.site_specific_overrides''' is set to its default value of true (or right-click and choose Reset if it is not).
(5) Right-click anywhere in the preference list area and choose
New > String
then paste the preference name you copied. Click OK and enter TEMP or asdf or any text as a temporary placeholder. You should see the preference added in bold. Leave about:config open and switch back to this tab.
(6) Select and copy the following useragent string to the clipboard ''(it's all one line)'':
Mozilla/5.0 (Windows NT 6.1; rv:19.0) Gecko/20100101 Firefox/19.0
(That's Firefox 19 on Windows 7 32-bit)
(7) In about:config, double-click '''general.useragent.override.elance''.''com''' and paste to replace the temporary text with the new useragent string. Click OK, you're done here.
Now try reloading a page where you need to upload (use Ctrl+Shift+r) and test that function again. Any change?

I changed email address and had to delete my account and create a new one with the new email address. When I did this i lost all of the information in my calendar. How can I recover this vital information?

My email address changed and I had to delete my account and create a new one with the new address. After I did this all of the data in my iPhone calendar is gone. How can I recover this vital data?

It is my understanding that if you delete the account per the instructions below, you will be able recreate, but you will NOT have access to the prior BBM contacts.
Read this for full information and suggestions to regain access to your BBID >> http://supportforums.blackberry.com/t5/BlackBerry-World/How-to-regain-access-to-your-BBID/td-p/25467...
You have to remember either the BlackBerryID password, or the secret question answer. Without either, you're stuck.
Your choices are:
--Use another email account to create an entirely new BlackBerryID (with which you will lose access to any purchased apps using the "forgotten" first BlackBerryID, or
--Find the initial email you were sent to confirm the initial BlackBerryID, and in it is a link to click to cancel and delete the account. Click on that, delete the account and then you can use that same email to create an entirely new account.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Adobe uses one of the worst software for its Community

Really these forums use one of the worst web software I ever came across with. It is slow loading, the interaction is even slower, windows close unexpectedly, I get logged out mid writing a entry, or it just refuses to let me in all of a sudden. I've spend to much time just retyping a message as they just disappear.
Is Adobe support looking for a more state of the art software to use on these forums?
Wish list:
Include a predefined selection of Operating Systems
Include a predefined selection of type of error (Discussion or question is way to wide)
Remove all useless and utterly annoying animations
When starting a new entry STOP MOVING the cursor away from the title to the entry. LET THE USER DECIDE WHAT (S)HE WILL WRITE FIRST
Instead of your old MacPro you use now, invest in a good webserver park.
Include a search that works.
Feel free add more points to this discussion.

theking2 wrote:
In IT, everything is possible. Just a matter of money.
Time that adobe puts its revenue at the right place and starts supporting its customers instead of its shareholders.
Try to convince Adobe of this, not us fellow users.

What plug adapter do I use to connect the new Macbook USB-C port to a cinema display?

What plug adapter do I use to connect the new Macbook USB-C port to a cinema display?

If you intend to connect your 2008 display to the new macbook then you will need a USB-C VGA Multiport Adapter ($79) as well as a mini display port to VGA port adapter ($29) and also a VGA-VGA Standard 15-Pin VGA Male to VGA Male Cable ($5).
http://store.apple.com/us/product/MJ1L2AM/A/usb-c-vga-multiport-adapter
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter
http://www.amazon.com/VGA-VGA-Standard-15-Pin-Male-Cable/dp/B0002AHT0M
The 2008 old cinema analogue Apple Cinema Displays were mostly pre-quipped with a mini display port rather than a VGA or HDMI port. So you will have to connect the mini display port to VGA port adapter to your 2008 ACD and the USB-C VGA Multiport Adapter to your new macbook and connect the two female VGA ports with a VGA-VGA Standard 15-Pin VGA Male to VGA Male Cable.
But I can't guarantee though that the above setup will work for your new macbook and your 2008 Apple Cinema Display. You should double check with Apple support regarding my suggestion. Just let me know.......

Which one is the newer verison of MSI GP60?

There are two images of the MSI, which one is the new?
Thnaks.
1.
2.
2nd one?

Quote from: JakeSully;112636
to me both are same? i think pic you got is same type old one has MSI and redl ines on back while new one has the badge and MSI logo
i think laptop looked like this earlier http://www.portableone.com/resize/Shared/Images/Product/MSI-GE70-Gaming-Laptop-GE70-2OE-017US-12GB-750GB-3-2GHz/GE70-500b.jpg?lr=t&bw=800&bh=800 cannot be 100% sure.
Update 2: Nvm 2nd pic is newer since first one is older, all MSI laptops now on has a MSI dragon army badge on back part of screen.
Oh thanks for the confirmation!
I'm looking at a retailer's website and I'm not sure if they got them mixed up or something. The newer version is cheaper? confused.
old for higher price.
new for lower price.

I install at the new update cc2014 but for some reason in my computer appear double app the old one and the new but the new dose not gave the setup that I have in my old version! What happen ?

I install at the new update cc2014 but for some reason in my computer appear double app the old one and the new but the new dose not gave the setup that I have in my old version! What happen ?

Seriously, I doubt that your answer helped Erik. He has two issues.
He installed the new program and has a double icon folders with software. One for the new & one for the old. (I have this same problem.)
He must have attempted to open one of the products and no longer see his personal settings transferred over. (The install will ask to have those settings migrating, but you have to accept it. eh, I could be wrong; but, that what i remembered doing.
I concur with his first.
However, i can not get any of my products to work. Ie. have to constantly click on icon to open; once open i get a unexpected error and have to close. I'm on a mac pro w/ latest os system.
In addition, I have tried to uninstall the older by clicking on the application's manager icon.; Unfortunately, it shuts down at each attempt. Therefore, I am unable to un-install the old product or the new.
Possibly, we were hoping that the new product would be simply updated if an old recent was already installed.
Instead, the installation simply created a new icon and the new folder with product.

Using one of the new WLS DAQ products on a rotating platform or something similar?

Similar Messages

Maybe you are looking for