Using only 3.8-9 ish GB ram of 8 GB available [GE70 2OE-011NE]

Hello, Recently i have noticed some problems with lag in some games and windows saying that it needs to close applications to free RAM.
This has been worrying me for some time since i was wondering what the hell was using so much ram. So i fired up taskmanager and checked performance.. Only 50% used.
Went on gaming and the message popped up again. Tabbed to taskmanager and still only 50% ram used.
It does not seem like the computer uses the other memorychip although it clearly states that it has 8 GB available.
Running factory shipped windows 8 upgraded to 8.1 on the windows store
Anyone else had similar issues and got a solution?

then looks like your memory is not enough, because i see that all memory is avaiable for use
and you got around 5GB free.
try start taskmanager, then sort running processes by memory usage and close the one which are not need before you start play this game.
else consider memory upgrade to 12GB/16GB or more

Similar Messages

  • Why use only 3gb ram when instaled 4 gb?

    why use only 3gb ram when instaled 4 gb??
    macbook 2,1 late 2007 mac os 10.6.8
    Название модели:    MacBook
          MacBook2,1
          Intel Core 2 Duo    2.16 ГГц
    RAM:   4 ГБ  667 МГц
      Версия Boot ROM:    MB21.00A5.B07
      Версия SMC (система):    1.17f0
        UUID     00000000-0000-1000-8000-001B6335F21C
    < Edited by Host >

    already read the threads about memory limitations,
    the snow leopard limitation has not been withdrawn, and the Mac OS Lion restriction will be removed? or not?

  • New G50-45 only able to use 3.46 of its 8GB of RAM

    Hey hey people.
    I just purchased a Lenovo G50-45 laptop the other night, and while it's working fine, my memory useage is constantly at about 60%+ for reasons unknown to me. I checked the system specs and it says that it does in fact have 8GB of RAM installed, but only 3.46 of that RAM is actually usable.
    Any ideas as to why this is? I cannot seem to find out myself.
    Thanks!
    EDIT: I seem to have mostly fixed the issue by going in and swapping the places of the ram sticks. I'm now down to about ~20ish% of memory being used, with 6.96 GB of usable RAM.

    If you are running windows 7 or 8 in 32bit you will not be able to use more than 4gb of ram. If 64bit you should be using all of it. If swapping memory sticks in sockets fixed this, you may have had one stick not fully seated in the socket.
    If issue has not been corrected, you may have either a bad stick of memory or a bad socket. Would suggest contacting Lenovo Support or taking back to point of purchase for replacement.

  • Premiere Pro CC 2014 and AME using only 25% of CPU

    Hello all,
    I've been having this problem with Premiere PRO CC 2014 and that when exporting it uses only 25% of my CPU thus taking 4 times longer than CS6 to export the same file project. I read a couple of forums with people having the same problems, I tired disabling CPU parking, disabling "Import sequences natively" in AME but no result.
    Quick PC specs:
    i5 4670
    16GB of RAM
    GeForce GTX 760 4GB DDR5
    Everything for Adobe including the video files in use are of Samsung's SSD drives. Using CUDA as the render engine.
    Currently one hour and 4 minutes clip in 4k takes about 52 hours to encode in Premiere CC 2014 and 9hr to encode the same project in CS6. Any ideas?

    Take a look at your GPU usage with something like GPU-Z to see if both Premiere versions are using the same amount of MPE GPU hardware acceleration.  Actually with CC 2014 it might work faster because Adobe added in more 4k effects/features for GPU acceleration.
    You might want to download our Premiere Pro BenchMark (PPBM) and run it on both versions.  The H.264 very complex timeline has 4K material in it and usually shows Premiere Pro 8.xxx take about only half the time that Premiere Pro CS6 take to export that same timeline.

  • Does T400 can only work with up to 4GB RAM?

    Does T400 can only work with up to 4GB RAM?
    Here (http://support.lenovo.com/en_NO/product-and-parts/detail.page?DocID=PD005598), it says 512 MB, 1 GB, 2GB, or 4GB memory.
    So if more than 4GB RAM, will it do harm to the hardware of T400? Or just only 4GB will be used, and no any harm?

    That doc was probably written when there were not 4GB DIMMs available, or at least being commonly used. T400 will work with any combination of 1GB, 2GB and 4GB DIMMs, up to 8GB total. I tried single 8GB DIMM and it didn't work

  • MBP with 4GB on board, Leopard use only 3GB

    I've a MBP with 4GB. The ram has been upgraded from 2GB to 4GB more than one year ago without problem. At that time the system recognized ad used all 4GB of ram.
    Today I've found out that Leopard doesn't use more than 3GB. System Activity Monitor show me (as any other place where I can look for information about ram) that the system have 4GB of ram, but it uses only 3.
    I've already tried these possibile solutions, but the problem is still there.
    http://support.apple.com/kb/HT1411
    http://support.apple.com/kb/HT1379
    This are System Profiler info on my ram
    BANK 0/DIMM0:
    Dimensioni: 2 GB
    Tipo: DDR2 SDRAM
    Velocità: 667 MHz
    Stato: OK
    Produttore: 0x7F98000000000000
    Codice prodotto: 0x393930353239352D3035352E4130304C4600
    Numero di serie: 0x0C164630
    BANK 1/DIMM1:
    Dimensioni: 2 GB
    Tipo: DDR2 SDRAM
    Velocità: 667 MHz
    Stato: OK
    Produttore: 0x7F98000000000000
    Codice prodotto: 0x393930353239352D3035352E4130304C4600
    Numero di serie: 0x0B164230
    Any help is appreciated.
    Thanks

    kimu wrote:
    The processor speed is 2.33 Ghz but I'm sure that when I upgraded all 4 GB was used.
    Well, sure or not, you are incorrect. Your machine cannot (and has never been able to) use the entire 4 GB, it's a limitation of the memory controller. Despite that limitation, it does show up in System Profiler and in About this Mac as 4 GB. However, only the 2.2/2.4/2.6 GHz MBPs can use the entire 4 GB - yours cannot.
    In these last days I've had an heavy reduction of speed. I've noticed it because I use a lot of virtual machines and now it's almost impossibile to load more than one.
    How much free space do you have on your hard disk? More than 15% of it's capacity?

  • HT204053 i RECENTLY PURCHASED ANOTHER IPHONE.  MY INTERNET IS NOT WORKING.  I JUST CREATED AN APPLE ID.  WHAT'S NEXT?  I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES.  HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

    I RECENTLY PURCHASED ANOTHER IPHONE.  MY INTERNET IS NOT WORKING.  I JUST CREATED AN APPLE ID.  WHAT'S NEXT?  I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES.  HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

    Welcome to the Apple community.
    iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
    For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

  • Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possi

    Hi,  If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)?  When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possible?  Thanks

    Yes. Yes. Yes.
    Mylenium

  • Need to use only one sender and receiver communication channel.

    Hello Experts.
    I have a scenario where in I have to use only one sender and receiver communication channel to push files from different source directories to different receiver directories.
    For Eg;
    Sender                              
    D://dir1/file1 --->                  E://dir1/File1
    F://dir2/file2 ---->                 G://dir2/file2
    H://dir3/file3----->                 I://dir3/file3.
    Can this be achieved by using pass through scenario?
    Please let me know if the requirement is not clear.     
    Thanks in advance.
    Advit Ramesh

    Hi Advit,
    I think it is possible. You have to use the Advanced Selection for Source file in the sender channel to define multiple files to be picked up. Also, the Dynamic configuration must also be enabled and used in the mapping so you can manipulate the target directory and target file name based on your source files.
    For Polling from multiple directories:
    http://wiki.scn.sap.com/wiki/display/XI/File+Sender+Adapter+-+Polling+Multiple+Directories
    Dynamic Configuration:
    Dynamic file name and directory in Receiver File Adapter - summary of possibilities - Process Integration - SCN Wiki

  • I am experiencing problems with my i phone due to sharing my daughters i tunes acoount. I have been told by apple to cancel my existing (shared) i tunes account and open a new one for my use only. How do I do this? Please help. RM

    I am experiencing on going problems with my i phone 4 due to me sharing an i tunes account with my daughter. I have been told by apple to cancel my existing (shared) i tunes account and open a new one for my use only. How do I do this? I cant find any links in i tunes to do this. mountfield

    No, it's done on the computer, it's just done on the web and not through iTunes. I guess you could do it on the iPhone, but it would be easier to do on the computer.
    Just go to the site linked above, then click on the big blue button and fill out the neccessary information.

  • HT204053 I have different iCloud IDs for my iPhone &Mac and I have 5GB on each, if I decide to use only 1 ID for both, can I have 10GB or will I be limited to 5 since it's 1 iCloud ID.

    I have different iCloud IDs for my iPhone &amp;Mac and I have 5GB on each, if I decide to use only 1 ID for both, can I have 10GB or will I be limited to 5 since it's 1 iCloud ID. I am afraid that if I I use only 1 iCloud ID for both of them I will be limited to only 5GB which is small a nd I don't have money to be paying annually for extra GB. Thanks and waiting for your replies.

    The free 5GB allowance is per account, not per device.
    If you back up to iTunes, 5 GB should be more than enough for the average user.

  • I have registered on my PC two devices iPhone 5 and iPod Touch 4 now I am using only the iPhone 5. I have two different apple ID`s and yesterday I have FB update and from app store wanted to sign in with the ID form iPod Touch 4 how to fix it?

    I have registered on my PC two devices iPhone 5 and iPod Touch 4 now I am using only the iPhone 5. I have two different apple ID`s and yesterday I have FB update and from app store wanted to sign in with the ID form iPod Touch 4 how to fix it? I want to use my current Apple ID not the old one. Regards!

    Try this
    http://support.apple.com/kb/ht1495
    Hope it helps.

  • I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

    I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

    I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

  • How do you use only one plugin in Logic for multiple guitar tracks? I want to only use one instance of Pod Farm and run all my guitar tracks through that one instance.

    I want to be able to use only one instance of Pod Farm for my guitars, and have all of my guitar tracks run through it while I'm recording.

    What he said. Or here is a similar approach with a picture.
    1. Press the SEND button on every stereo (or mono) guitar track you want to send through the effect. Then select a free bus.
    2. Make sure you turn up the amount of send (in db). Holding alt while leftclicking on this circle sets the send level to 0 db wich is good.
    3. Open the mixer (Cmd+2). Please see that I here have turned the output off from the stereo guitar track. That way the only output will be the BUS, in your case the AmpTrack bus where all your guitars will pass through. If you want both the original guitar sound AND the Ampfarm effect then just set all outputs on your guitar tracks to Stereo Out, like the AmpF Bus track is set in my picture.
    4. Insert your AmpFarm plugin here. I don´t have that plug so I inserted Waves Renes Axe for demo purpose.
    Adjust the volume/effect of every guitartrack by turning the circle input shown as 2. in my picture.
    I now see that you mentioned Pod Farm, not AmpFarm. But I guess it´s the same trick.
    Have fun.
    Heyclown.
    Message was edited by: WizardSongs - Typhoos

  • How can i use only black cartridge for printing documents

    i have today installed hp 1510 all in one printer, it uses ink from the both cartridges i just want to use black ink for printing documents, how can i do that
    This question was solved.
    View Solution.

    Hi @sandeepv 
    I can help you with your print settings, so the printer will print black and white only.
    If you have a Mac operating system, use the instructions below.
    Printing with the Black Print Cartridge Only option
    Click File and then click Print.
    Make sure your printer is selected.
    Verify that the Preset option is set to Standard.
    In the Copies & Pages menu, select Select Paper Type / Quality.
    NOTE:If this option is not available, click ColorSync. Then click the down arrow beside Quartz Filter and change the setting from None to Black & White.
    Select the Paper tab.
    From the Color option menu, select Grayscale.
    Select the Color Options tab.
    Select the Black Print Cartridge Only option.
    If that option is not listed, then it is not available. The printer will print using only the black cartridge, however, printing with one cartridge will be slower than printing with both cartridges.
    NOTE:To save the setting, click the arrow next to Preset and select Save As. Save the Preset option as Black Cartridge Only and then click OK. Then, the next time you want to print with just the black cartridge, select the Black Cartridge Only Preset.    -Source
    If you are using a Windows operating system, use the instructions in the following link. Although this document is titled Changing Print Settings in Windows 8 it can be used for other Windows operating systems. The navigation from Windows 8 to older Windows operating systems would vary, please let me know if you are using a different operating system and/or if you require additional assistance.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for