Using Oracle Designer for XML Message Definition

Knowing what a great advantage it is to have all my data definitions in one place (Deigner Repository) I was wondering if anyone has had a go at using Designer for XML message definitions?

Hello:
Didnt know I will have my question almost ready:).
Was wondering is it possible to have xmltyple column as data source, use xsl for transformation and then display as html or pdf? Also, how about css? Not sure if any of these would work. If anyone can give a reference, that would be great. What is the best way. My xml stored in the database in quite complex and may vary depending on different types of input parameters. Do I need to get a master that will have all valid elements and attributes - or - have dtd or xsd?

Similar Messages

  • Use of Oracle Designer for DB2 platforms

    Hi! Is there sombody who can answer these questions?
    I use Oracle Designer v 6.0.3 and I wonder if
    the DB2 ddl scripts that Oracle Designer generates
    can be use for IBM maifraims platform OS/390 ?
    I also wonder if there is any other development tool that
    generates modify or alter scripts?

    Hi,
    my Ora-Trigger-Solution works well on R/3 development system.
    On quality assurance system it dumps with ORA-04098.
    It looks like, that required object privileges have been never granted.
    Do someone know, what priviliges or authorisations have to be maintained and where to maintain this?
    Thanks and regards,
    Wolfgang

  • Getting error while publishing workflow using SP designer for SharePoint 2013

    Hi,
    I am try to setup Workflow manager for our sharepoint applications.
    WF manager set ran without any issue.
    I registered the SPWorkflow service which succeeded as well. The Workflow service application shows "Workflow is connected"
    I am creating a workflow using sharepoint designer using my credential (not Service account). I am able to save it but while publishing, its prompting with an error.
    The error says "Errors were found while compiling the workflow.The workflow files were saved but cannot run." Clicking advanced button show
    "Microsoft.SharePoint.SPException: We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
       at Microsoft.SharePoint.SPScaleOutDatabaseMap.CreateSqlSession(ISPScaleOutDatabaseMapProvider mapProvider, Byte[] compositeKey, Guid forceRefreshVersion, Guid& version)
       at Microsoft.SharePoint.SPScaleOutDatabaseCommandExecutor.Execute(ExecuteDelegate operation, ISPScaleOutDatabaseMapProvider mapProvide"
    Any help would be highly appreciated
    Thanks,

    Hi,
    According to your post, my understanding is that you got error while publishing workflow using SharePoint designer for SharePoint 2013.
    Please check whether the Central Admin > Manage Service Application-> “App Management Service” is started.
    Please check whether the “Configure service application associations”,  ”App Management Service” is already associated.
    Then please check whether the “Manage Services on server” and the “App Management Service” is started.
    In addition, please try to re-register Workflow Service.
    If the issues still exists, please follow the steps in the
    Steps to Verify that Server Is Correctly Set Up. After you verified that the server is correctly set up, follow the steps in the
    Steps to Troubleshoot Workflow Management Service and
    Troubleshooting the Service Bus for Windows Server then retry your action related to publishing workflows
    More information:
    http://wp.ahcheng.com/2013/03/23/error-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
    http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Using Oracle Paser for schema validation

    Hi,
    I am trying to use oracle parser for schema validation. I get hold of oracle parser using jaxp api. Below is the code snippet. When i set the attribute to turn the schema validation on, orale parser does not recognize this jaxp attribute . How can i do schema validation using oracle's xml parser implementaion that i get using jaxp?
    String JAXP_SCHEMA_LANGUAGE = "http://java.sun.com/xml/jaxp/properties/schemaLanguage";
    String W3C_XML_SCHEMA = "http://www.w3.org/2001/XMLSchema";
    javax.xml.parsers.DocumentBuilderFactory factory = javax.xml.parsers.DocumentBuilderFactory.newInstance();
    factory.setValidating(validate);
    factory.setNamespaceAware(true);
    factory.setAttribute (JAXP_SCHEMA_LANGUAGE,W3C_XML_SCHEMA);
    javax.xml.parsers.DocumentBuilder builder = factory.newDocumentBuilder();
    Thanks

    DOMParser domParser=new DOMParser();
    domParser.setValidationMode(XMLParser.SCHEMA_VALIDATION);
    domParser.setXMLSchema(SchemaUrl);
    DefaultHandler handler=new DefaultHandler();
    DOMParser.setErrorHandler(handler);
    Parse the XML document to validate with the XML schema.
    domParser.parse(XmlDocumentUrl);

  • Could we use embedded SQL for XML in .pc ?

    Hi,
    Can we use embedded SQL for XML in .pc ?
    <1> assume we have run SQL statements in Oracle9i:
    SQL>create table MY_XML_TABLE
    (Key1 NUMBER,
    Xml_Column SYS.XMLTYPE);
    SQL>insert into MY_XML_TABLE(key1, Xml_Column) values
    (1, SYS.XMLTYPE.CREATEXML
    ('<book>
    <chapter num="1">
    <text>This is the my text</text>
    </chapter>
    <book>')
    <2> Could we directly translate it in .pc as usually:
    <outlined, not exactly)
    int emp_number = 1;
    XML_Data emprec; /* ?????? */
    EXEC SQL SELECT M.Xml_Column.GETCLOBVAL() as XML_Data
    INTO :emprec INDICATOR :emprec_ind
    FROM MY_XML_TABLE M
    WHERE Key1 = :emp_number;
    Thanks
    MJ

    reply by myself.
    No problem!!
    ===============================
    int emp_number = 1;
    struct emprec{
    char feature[1280]
    EXEC SQL SELECT M.Xml_Column.GETCLOBVAL() as XML_Data
    INTO :emprec INDICATOR :emprec_ind
    FROM MY_XML_TABLE M
    WHERE Key1 = :emp_number;

  • Can I use Oracle XE for commercial purpose?

    Hi can anyone please tell me if I can use Oracle XE for my company's database?

    Hi,<br>
    <br>
    It seems yes, Oracle Database 10g Express Edition (Free to develop, deploy, and distribute)<br>
    <br>
    Nicolas.

  • Can i use oracle 8i for oracle 9ias application server ?

    can i use oracle 8i for oracle 9ias application server for developing jsp applicationes?
    can i run the oracle 8i data application with 9 ias oracle server?
    can any one give suggetion?
    pullareddy

    Hi
    Each time when you start your computer, you need to restart Oracle as well, its only with Windows XP. The process you have to follow each time is:
    Start -->Run and then type CMD to open command prompt.
    In command prompt type
    svrmgrl and then press
    connect internal/oracle and then press
    startup force and then press
    If you have any problem, then please email me, [email protected]
    Goodluck

  • Using HRALE00INBOUND_IDOC BADI for HRMD_A message,  infty 0105

    Hello Experts,
    I am using HRALE00INBOUND_IDOC BADI for HRMD_A message type (for HR master data and infotype 0105).
    I have configured OUTBOUND and INBOUND systems. I have created Z programe for idoc generation.
    In Z program, changing only one filed i.e. USRID_LONG (EMAIL Address).
    After executing the Z program IDOC is generating and if we see in WE05 then it is in YELLOW color with status 30 and 01.
    After that i am using we19 or BD87 and process the IDOC then it will come in green color. I am checking on INBOUND system, IDOC is receving successfuly with green color and with updated data.
    But If we go to PA30 transaction code and check to the email address (infty 0105 and subtype 0010) that is not updating.
    Why? If i am receving IDOC successfuly then why Data base table is not updating?
    Thanks in advance,
    Ranveer

    Hello Anatony,
    BADI HRALE00INBOUND_IDOC is trrigering in INBOUND side.
    Now data is updating, but problem with data.
      s_e1plogi-plvar = '01'.
      s_e1plogi-otype = 'P'.
      s_e1plogi-objid = '00000014'.
      s_e1plogi-opera = 'U'.        
      APPEND s_e1plogi.
      int_edidd-segnam = c_e1plogi.
      int_edidd-hlevel = '02'.
      int_edidd-sdata = s_e1plogi.
      APPEND int_edidd.
      s_e1pityp-plvar = '01'.
      s_e1pityp-otype = 'P'.
      s_e1pityp-objid = '00000014'.
      s_e1pityp-infty = '0105'.
      APPEND s_e1pityp.
      int_edidd-segnam = c_e1pityp.
      int_edidd-hlevel = '03'.
      int_edidd-sdata = s_e1pityp.
      APPEND int_edidd.
    U for update. If sender system have data for 0010 subtype, and recevier side 10 subtype is blank. In that case infotype 0105 is creating, but if infotype is already available on INBOUND system and wants to update, in that case data is not updating and IDOC in red color with 51 status. Message is " Infotype 0105 cannot be updated on database table PA0105".
    My logic is for update....
    select * from pa0105 into table int_pa30
                  where pernr = '00000014'.
      int_pa30-usrid_long = 'ABC1 ATTHERATE SAP.COM'.
      modify int_pa30 transporting usrid_long
      where usrid_long = 'XYZ ATTHERATE SAP.COM'.
    *--To send the data to 510 Client thru IDOC.
      loop at int_pa30.
        int_pa0105-infty = '0105'.
        move-corresponding int_pa30 to int_pa0105.
        append int_pa0105.
      endloop.
    So, where is my fault kindly update me.
    Thanks in Advance,
    Regards,
    Ranveer

  • How we create workflow using sharepoint designer for first review the documnet than go for approve the document.

    Hi to all
    I have team site in site collection under this i have Shared Document library. Now i want to create the workflow for the shared Document library. How i will create workflow using sharepoint designer for first review the documnet than go for approve
    the document.

    Hi ,
    According to your description, my understanding is that you want to create a workflow which contains review and approval process.
    For implemening your requirement, you can create a workflow containing two steps. The first step is used to collect user information and set workflow variables, and the second step is used to verify whether the reviewer approve. If the reviewers complete
    approving, a pproval workflow is started. The whole workflow is like :
    More information, please refer to the links below:
    http://www.documentmanagementworkflowinfo.com/sharepoint-video-tutorials/create-document-review-workflow-sharepoint-designer-2007.htm
    http://office.microsoft.com/en-us/sharepoint-designer-help/watch-this-design-a-document-review-workflow-solution-HA010256417.aspx
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • I want to use ODI to read XML messages from JMS queue and then process it..

    I want to use oracle ODI (Oracle Data Integrator) to read XML messages from JMS queue and then process it.. i also want to process and validate the data in it....
    Could anyone please tell me the steps to achieve the same. I tried some ways which i got on OTN, but not able to implement it exactly...
    As i m very new to ODI, it will be great if you provide detailed steps..
    Thanks in advance for your help....

    Hi,
    Were you able to do it? We are facing this same issue now and, despite the fact the docs say otherwise, it does not seem to be a trivial task.
    TIA,
    Tedi

  • Design Help (XML Messaging)

    I have a situation where a client (c program) that I have no control over needs to send an XML message to a remote server (java program). I'm looking at two options, using SOAP or possibly using JMS (something like Websphere MQ).
    Using SOAP I'd have to use SAAJ and not something like Axis, since Axis uses JAX-RPC and the c program wouldn't be able to use this protocol? Or can I use JAX-RPC on the java end and not care about what the c program is using? Does anyone know how this works with synchronous communication?
    The reason I'm looking at JMS is that I need to be able to guarantee that no data will be lost. Using something like Websphere MQ I can queue up messages so that if the server goes down the messages get processed when the server comes back up again.
    The two most important things for me are reliability and performance. It's likely that the amount and size of the XML messages sent will be large.
    So can anyone help me decide what's the best design? Any other options?

    The "best" design would be the one that conforms with
    the way your unchangeable client actually works.
    Setting up something that it couldn't communicate with
    wouldn't be "best" in my opinion.They haven't developed it yet. I need to tell them what do to, that is, whether to use SOAP or some JMS based messaging service.

  • Cannot see context menu for XML messages with Safari and Google Chrome

    Hi All,
    I am unable to see Context menu with the option of Create, Edit, Delete etc. for KM messages. This problem persists with Safari, Chrome and IE9 browsers. This thing works fine on IE7 and IE8 browesrs.
    On clicking  History and Options buttondoesn't perform any action i.e. we cannot see the list of options when clicking on those. This problem also persists with the above mentioned browsers.
    Also, with IE9 , I am unable to create New message when clicking on New button. The XML form doesnt open on the button click.
    The portal version I am using is EP 7.0.
    Can someone help me out with this?
    Thanks a lot in advance.
    Regards,
    Archana

    Hello Archana,
    You should check the PAM to see if your browser is supported with your current EP verison.
    http://service.sap.com/pam
    Regards,
    Lorcan.

  • Error fetching data from a foxpro db using Oracle Gateway for ODBC

    Hi.
    I have an 10.2.0.1 database an a 11.2.0 Oracle Gateway for ODBC installed and configured.
    The dblink test works fine, I can connect with the foxpro database because if I execute desc centros I can see the
    columns of table centros.
    The problem comes when I try to execute Select * from centros@fox1;
    A syntax error is returned ([Microsoft][ODBC Visual FoxPro Driver]Syntax error. {42000,NativeErr = 200})
    I paste down the output of the trace file with HS_FDS_TRACE_LEVEL=255
    If I run select codcen from centros@fox1; another error is shown. Tell me if you want the other trace file.
    select codcen from centros@fox1
    ERROR en lÝnea 1:
    ORA-00904: "CODCEN": identificador no vßlido
    Oracle Corporation --- JUEVES MAY 31 2012 13:11:24.765
    Heterogeneous Agent Release
    11.2.0.1.0
    Oracle Corporation --- JUEVES MAY 31 2012 13:11:24.750
    Version 11.2.0.1.0
    Entered hgogprd
    HOSGIP for "HS_FDS_TRACE_LEVEL" returned "255"
    Entered hgosdip
    setting HS_OPEN_CURSORS to default of 50
    setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
    setting HS_FDS_RECOVERY_PWD to default value
    setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
    setting HS_IDLE_TIMEOUT to default of 0
    setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
    setting HS_NLS_NCHAR to default of "UCS2"
    setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
    setting HS_FDS_DATE_MAPPING to default of "DATE"
    setting HS_RPC_FETCH_REBLOCKING to default of "ON"
    setting HS_FDS_FETCH_ROWS to default of "100"
    setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
    setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
    setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
    setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
    setting HS_FDS_MAP_NCHAR to default of "TRUE"
    setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
    setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
    setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
    setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
    setting HS_FDS_QUERY_DRIVER to default of "TRUE"
    setting HS_FDS_SUPPORT_STATISTICS to default of "FALSE"
    Parameter HS_FDS_QUOTE_IDENTIFIER is not set
    setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
    setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
    setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
    Default value of 32 assumed for HS_FDS_SQLLEN_INTERPRETATION
    setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics;gtw$:SQLGetInfo"
    setting HS_FDS_DELAYED_OPEN to default of "TRUE"
    setting HS_FDS_WORKAROUNDS to default of "0"
    Exiting hgosdip, rc=0
    ORACLE_SID is "DAVID"
    Product-Info:
    Port Rls/Upd:1/0 PrdStat:0
    Agent:Oracle Database Gateway for ODBC
    Facility:hsa
    Class:ODBC, ClassVsn:11.2.0.1.0_0008, Instance:DAVID
    Exiting hgogprd, rc=0
    hostmstr: 2057416704:      HOA After hoagprd
    hostmstr: 2057416704:      HOA Before hoainit
    Entered hgoinit
    HOCXU_COMP_CSET=1
    HOCXU_DRV_CSET=178
    HOCXU_DRV_NCHAR=1000
    HOCXU_DB_CSET=178
    HOCXU_SEM_VER=102000
    Entered hgolofn at 2012/05/31-13:11:25
    Exiting hgolofn, rc=0 at 2012/05/31-13:11:25
    HOSGIP for "HS_OPEN_CURSORS" returned "50"
    HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
    HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
    HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
    HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
    HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
    HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
    HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
    HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
    Invalid value of 32 given for HS_FDS_SQLLEN_INTERPRETATION
    treat_SQLLEN_as_compiled = 1
    Exiting hgoinit, rc=0 at 2012/05/31-13:11:25
    hostmstr: 2057416704:      HOA After hoainit
    hostmstr: 2057416704:      HOA Before hoalgon
    Entered hgolgon at 2012/05/31-13:11:25
    reco:0, name:SYSTEM, tflag:0
    Entered hgosuec at 2012/05/31-13:11:25
    Exiting hgosuec, rc=0 at 2012/05/31-13:11:25
    HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
    HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
    HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
    HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
    HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
    HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
    HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
    HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
    HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
    HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
    using SYSTEM as default value for "HS_FDS_DEFAULT_OWNER"
    HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
    Entered hgocont at 2012/05/31-13:11:25
    HS_FDS_CONNECT_INFO = "Prueba_Foxpro"
    RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
    Entered hgogenconstr at 2012/05/31-13:11:25
    dsn:Prueba_Foxpro, name:SYSTEM
    optn:
    Entered hgocip at 2012/05/31-13:11:25
    dsn:Prueba_Foxpro
    Exiting hgocip, rc=0 at 2012/05/31-13:11:25
    ##>Connect Parameters (len=39)<##
    ## DSN=Prueba_Foxpro;
    #! UID=SYSTEM;
    #! PWD=*
    Exiting hgogenconstr, rc=0 at 2012/05/31-13:11:25
    Entered hgopoer at 2012/05/31-13:11:26
    hgopoer, line 233: got native error 0 and sqlstate 01000; message follows...
    [*Microsoft][Administrador de controladores ODBC] El controlador no admite una versión de ODBC distinta de la que la necesita la aplicación (vea SQLSetEnvAttr)*. {01000}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:26
    hgocont, line 2686: calling SqlDriverConnect got sqlstate 01000
    Entered hgolosf at 2012/05/31-13:11:26
    ODBC Function-Available-Array 0xFFFE 0x00FF 0xFF00 0xAA7F 0x03B3 0x0000
    0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
    0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
    0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
    0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
    0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
    0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
    0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
    0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
    0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
    0x0000 0x0000 0xEE00 0x395C
    Exiting hgolosf, rc=0 at 2012/05/31-13:11:26
    DriverName:VFPODBC.DLL, DriverVer:06.86.0001
    DBMS Name:Visual FoxPro, DBMS Version:03.00.0000
    Exiting hgocont, rc=0 at 2012/05/31-13:11:26 with error ptr FILE:hgocont.c LINE:2686 ID:SQLDriverConnect
    Entered hgopoer at 2012/05/31-13:11:26
    hgopoer, line 233: got native error 0 and sqlstate HYC00; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]Driver not capable {HYC00}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:26
    hgolgon, line 795: calling SQLGetInfo got sqlstate HYC00
    SQLGetInfo returns N for SQL_CATALOG_NAME
    Exiting hgolgon, rc=0 at 2012/05/31-13:11:26 with error ptr FILE:hgolgon.c LINE:795 ID:GetInfo: Support catalogs
    hostmstr: 2036506624:      HOA After hoalgon
    RPC Calling nscontrol(0), rc=0
    hostmstr: 2036506624: RPC Before Upload Caps
    hostmstr: 2036506624:      HOA Before hoaulcp
    Entered hgoulcp at 2012/05/31-13:11:26
    Entered hgowlst at 2012/05/31-13:11:26
    Exiting hgowlst, rc=0 at 2012/05/31-13:11:26
    SQLGetInfo returns 0x0 for SQL_OWNER_USAGE
    TXN Capable:1, Isolation Option:0x2
    SQLGetInfo returns 0 for SQL_MAX_SCHEMA_NAME_LEN
    SQLGetInfo returns 128 for SQL_MAX_TABLE_NAME_LEN
    SQLGetInfo returns 0 for SQL_MAX_PROCEDURE_NAME_LEN
    SQLGetInfo returns ` (0x60) for SQL_IDENTIFIER_QUOTE_CHAR
    SQLGetInfo returns Y for SQL_COLUMN_ALIAS
    16 instance capabilities will be uploaded
    capno:1964, context:0x00000000, add-info: 0
    capno:1989, context:0x00000000, add-info: 0
    capno:1991, context:0x0001ffff, add-info: 0
    capno:1992, context:0x0001ffff, add-info: 1, translation:"`"
    capno:3042, context:0x00000000, add-info: 0, translation:"42"
    capno:3047, context:0x00000000, add-info: 0, translation:"57"
    capno:3049, context:0x00000000, add-info: 0, translation:"59"
    capno:3050, context:0x00000000, add-info: 0, translation:"60"
    capno:3066, context:0x00000000, add-info: 0
    capno:3067, context:0x00000000, add-info: 0
    capno:3068, context:0x00000000, add-info: 0
    capno:3069, context:0x00000000, add-info: 0
    capno:3500, context:0x00000001, add-info: 91, translation:"42"
    capno:3501, context:0x00000001, add-info: 93, translation:"57"
    capno:3502, context:0x00000001, add-info: 107, translation:"59"
    capno:3503, context:0x00000001, add-info: 110, translation:"60"
    Exiting hgoulcp, rc=0 at 2012/05/31-13:11:26
    hostmstr: 2036506624:      HOA After hoaulcp
    hostmstr: 2036506624: RPC After Upload Caps
    hostmstr: 2036506624: RPC Before Upload DDTR
    hostmstr: 2036506624:      HOA Before hoauldt
    Entered hgouldt at 2012/05/31-13:11:27
    NO instance DD translations were uploaded
    Exiting hgouldt, rc=0 at 2012/05/31-13:11:27
    hostmstr: 2036506624:      HOA After hoauldt
    hostmstr: 2036506624: RPC After Upload DDTR
    hostmstr: 2036506624: RPC Before Begin Trans
    hostmstr: 2036506624:      HOA Before hoabegn
    Entered hgobegn at 2012/05/31-13:11:27
    tflag:0 , initial:1
    hoi:0x12f094, ttid (len 54) is ...
    00: 54455354 2E524547 52455353 2E524442 [TEST.REGRESS.RDB]
    10: 4D532E44 45562E55 532E4F52 41434C45 [MS.DEV.US.ORACLE]
    20: 2E434F4D 2E663033 63383037 372E392E [.COM.f03c8077.9.]
    30: 34342E37 3735 [44.775]
    tbid (len 10) is ...
    0: 09002C00 07030000 0104 [..,.......]
    Exiting hgobegn, rc=0 at 2012/05/31-13:11:27
    hostmstr: 2036506624:      HOA After hoabegn
    hostmstr: 2036506624: RPC After Begin Trans
    hostmstr: 2036506624: RPC Before Describe Table
    hostmstr: 2036506624:      HOA Before hoadtab
    Entered hgodtab at 2012/05/31-13:11:27
    count:1
    table: CENTROS
    Entered hgopdsc at 2012/05/31-13:11:27
    Describing procedure CENTROS
    Output hoada
    hgopdsc, line 1426: NO hoada to print
    Exiting hgopdsc, rc=942 at 2012/05/31-13:11:27
    The hoada for table CENTROS follows...
    hgodtab, line 904: NO hoada to print
    Exiting hgodtab, rc=0 at 2012/05/31-13:11:27
    hostmstr: 2036506624:      HOA After hoadtab
    hostmstr: 2036506624: RPC After Describe Table
    hostmstr: 2036506624: RPC Before SQL Bundling
    hostmstr: 2036506624:      HOA Before hoxpars
    Entered hgopars, cursor id 1 at 2012/05/31-13:11:27
    type:0
    SQL text from hgopars, id=1, len=23 ...
    00: 53454C45 4354202A 2046524F 4D202243 [SELECT * FROM "C]
    10: 454E5452 4F5322 [ENTROS"]
    Exiting hgopars, rc=0 at 2012/05/31-13:11:28
    hostmstr: 2036506624:      HOA After hoxpars
    hostmstr: 2036506624: RPC After SQL Bundling
    hostmstr: 2036506624: RPC Before SQL Bundling
    hostmstr: 2036506624:      HOA Before hoxopen
    Entered hgoopen, cursor id 1 at 2012/05/31-13:11:28
    hgoopen, line 87: NO hoada to print
    Deferred open until first fetch.
    Exiting hgoopen, rc=0 at 2012/05/31-13:11:28
    hostmstr: 2036506624:      HOA After hoxopen
    hostmstr: 2036506624:      HOA Before hoxdscr
    Entered hgodscr, cursor id 1 at 2012/05/31-13:11:28
    Allocate hoada @ 023E983C
    Entered hgopoer at 2012/05/31-13:11:28
    hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]*Descriptor type out of range* {HY091}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
    hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
    Entered hgopcda at 2012/05/31-13:11:28
    Column:1(codcen): dtype:1 (CHAR), prc/scl:8/0, nullbl:0, octet:8, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
    Entered hgopoer at 2012/05/31-13:11:28
    hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
    hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
    Entered hgopcda at 2012/05/31-13:11:28
    Column:2(litcen): dtype:1 (CHAR), prc/scl:45/0, nullbl:0, octet:45, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
    Entered hgopoer at 2012/05/31-13:11:28
    hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
    hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
    Entered hgopcda at 2012/05/31-13:11:28
    Column:3(codpos): dtype:1 (CHAR), prc/scl:5/0, nullbl:0, octet:5, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
    Entered hgopoer at 2012/05/31-13:11:28
    hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
    hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
    Entered hgopcda at 2012/05/31-13:11:28
    Column:4(codprov): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
    Entered hgopoer at 2012/05/31-13:11:28
    hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
    hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
    Entered hgopcda at 2012/05/31-13:11:28
    Column:5(codmun): dtype:1 (CHAR), prc/scl:3/0, nullbl:0, octet:3, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
    Entered hgopoer at 2012/05/31-13:11:28
    hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
    hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
    Entered hgopcda at 2012/05/31-13:11:28
    Column:6(codecol): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
    Entered hgopoer at 2012/05/31-13:11:28
    hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
    hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
    Entered hgopcda at 2012/05/31-13:11:28
    Column:7(codesin): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
    Entered hgopoer at 2012/05/31-13:11:28
    hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
    hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
    Entered hgopcda at 2012/05/31-13:11:28
    Column:8(cb): dtype:1 (CHAR), prc/scl:4/0, nullbl:0, octet:4, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
    Entered hgopoer at 2012/05/31-13:11:28
    hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
    hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
    Entered hgopcda at 2012/05/31-13:11:28
    Column:9(cs): dtype:1 (CHAR), prc/scl:4/0, nullbl:0, octet:4, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
    Entered hgopoer at 2012/05/31-13:11:28
    hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
    hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
    Entered hgopcda at 2012/05/31-13:11:28
    Column:10(digitocon): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
    Entered hgopoer at 2012/05/31-13:11:28
    hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
    hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
    Entered hgopcda at 2012/05/31-13:11:28
    Column:11(cuenta): dtype:1 (CHAR), prc/scl:10/0, nullbl:0, octet:10, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
    Entered hgopcda at 2012/05/31-13:11:28
    Column:12(solar): dtype:2 (NUMERIC), prc/scl:5/0, nullbl:0, octet:10, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
    Entered hgopcda at 2012/05/31-13:11:28
    Column:13(construido): dtype:2 (NUMERIC), prc/scl:5/0, nullbl:0, octet:10, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
    Entered hgopoer at 2012/05/31-13:11:28
    hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
    hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
    Entered hgopcda at 2012/05/31-13:11:28
    Column:14(domicen): dtype:1 (CHAR), prc/scl:40/0, nullbl:0, octet:40, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
    Entered hgopoer at 2012/05/31-13:11:28
    hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
    hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
    Entered hgopcda at 2012/05/31-13:11:28
    Column:15(telef): dtype:1 (CHAR), prc/scl:11/0, nullbl:0, octet:11, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
    Entered hgopoer at 2012/05/31-13:11:28
    hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
    hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
    Entered hgopcda at 2012/05/31-13:11:28
    Column:16(fax): dtype:1 (CHAR), prc/scl:11/0, nullbl:0, octet:11, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
    Entered hgopoer at 2012/05/31-13:11:28
    hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
    hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
    Entered hgopcda at 2012/05/31-13:11:28
    Column:17(cif): dtype:1 (CHAR), prc/scl:11/0, nullbl:0, octet:11, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
    Entered hgopoer at 2012/05/31-13:11:28
    hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
    hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
    Entered hgopcda at 2012/05/31-13:11:28
    Column:18(litloc): dtype:1 (CHAR), prc/scl:30/0, nullbl:0, octet:30, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
    hgodscr, line 910: Printing hoada @ 023E983C
    MAX:18, ACTUAL:18, BRC:100, WHT=5 (SELECT_LIST)
    hoadaMOD bit-values found (0x200:TREAT_AS_CHAR)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    1 CHAR N 8 8 0/ 0 0 0 200 codcen
    1 CHAR N 45 45 0/ 0 0 0 200 litcen
    1 CHAR N 5 5 0/ 0 0 0 200 codpos
    1 CHAR N 2 2 0/ 0 0 0 200 codprov
    1 CHAR N 3 3 0/ 0 0 0 200 codmun
    1 CHAR N 2 2 0/ 0 0 0 200 codecol
    1 CHAR N 2 2 0/ 0 0 0 200 codesin
    1 CHAR N 4 4 0/ 0 0 0 200 cb
    1 CHAR N 4 4 0/ 0 0 0 200 cs
    1 CHAR N 2 2 0/ 0 0 0 200 digitocon
    1 CHAR N 10 10 0/ 0 0 0 200 cuenta
    3 DECIMAL N 7 7 5/ 0 0 0 0 solar
    3 DECIMAL N 7 7 5/ 0 0 0 0 construido
    1 CHAR N 40 40 0/ 0 0 0 200 domicen
    1 CHAR N 11 11 0/ 0 0 0 200 telef
    1 CHAR N 11 11 0/ 0 0 0 200 fax
    1 CHAR N 11 11 0/ 0 0 0 200 cif
    1 CHAR N 30 30 0/ 0 0 0 200 litloc
    Exiting hgodscr, rc=0 at 2012/05/31-13:11:28 with error ptr FILE:hgodscr.c LINE:615 ID:Transfer Octet Length
    hostmstr: 2036506624:      HOA After hoxdscr
    hostmstr: 2036506624: RPC After SQL Bundling
    hostmstr: 2036506624: RPC Before SQL Bundling
    hostmstr: 2036506624:      HOA Before hoxclse
    Entered hgoclse, cursor id 1 at 2012/05/31-13:11:28
    Exiting hgoclse, rc=0 at 2012/05/31-13:11:28
    hostmstr: 2036506624:      HOA After hoxclse
    hostmstr: 2036506624:      HOA Before hoadafr
    Entered hgodafr, cursor id 1 at 2012/05/31-13:11:28
    Free hoada @ 023E983C
    Exiting hgodafr, rc=0 at 2012/05/31-13:11:28
    hostmstr: 2036506624:      HOA After hoadafr
    hostmstr: 2036506624:      HOA Before hoxpars
    Entered hgopars, cursor id 1 at 2012/05/31-13:11:28
    type:0
    SQL text from hgopars, id=1, len=235 ...
    00: 53454C45 43542041 312E2263 6F646365 [SELECT A1."codce]
    10: 6E222C41 312E226C 69746365 6E222C41 [n",A1."litcen",A]
    20: 312E2263 6F64706F 73222C41 312E2263 [1."codpos",A1."c]
    30: 6F647072 6F76222C 41312E22 636F646D [odprov",A1."codm]
    40: 756E222C 41312E22 636F6465 636F6C22 [un",A1."codecol"]
    50: 2C41312E 22636F64 6573696E 222C4131 [,A1."codesin",A1]
    60: 2E226362 222C4131 2E226373 222C4131 [."cb",A1."cs",A1]
    70: 2E226469 6769746F 636F6E22 2C41312E [."digitocon",A1.]
    80: 22637565 6E746122 2C41312E 22736F6C ["cuenta",A1."sol]
    90: 6172222C 41312E22 636F6E73 74727569 [ar",A1."construi]
    A0: 646F222C 41312E22 646F6D69 63656E22 [do",A1."domicen"]
    B0: 2C41312E 2274656C 6566222C 41312E22 [,A1."telef",A1."]
    C0: 66617822 2C41312E 22636966 222C4131 [fax",A1."cif",A1]
    D0: 2E226C69 746C6F63 22204652 4F4D2022 [."litloc" FROM "]
    E0: 43454E54 524F5322 204131 [CENTROS" A1]
    Entered hgopoer at 2012/05/31-13:11:28
    hgopoer, line 233: got native error 200 and sqlstate 42000; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]Syntax error. {42000,NativeErr = 200}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
    hgopars, line 457: calling SQLPrepare got sqlstate 42000
    Exiting hgopars, rc=28500 at 2012/05/31-13:11:28 with error ptr FILE:hgopars.c LINE:487 ID:Prepare stmt
    hostmstr: 2036506624:      HOA After hoxpars
    hostmstr: 2036506624: RPC After SQL Bundling

    The first issue I see is that Oracle 10.2.0.1 was never certified with DG4ODBC 11. Only 10.2.0.4 or 10.2.0.5 can be used as the Oracle database HS kernel requires a gateway compatibility patch and this patch is included in 10.2.0.4 or 10.2.0.5 Oracle database patch set.
    Then another error in the trace is that for each column description you have an error:
    hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
    [Microsoft][ODBC Visual FoxPro Driver]*Descriptor type out of range* {HY091}
    Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
    hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
    It seems it is not critical as DG4ODBC continues, but a more detailed analysis would require an ODBC trace.
    When looking at the table description it seems the column names are all in lower letters, for example: solar. So commonly Dg4ODBC needs to quote the names
    00: 53454C45 43542041 312E2263 6F646365 [SELECT A1."codce]
    10: 6E222C41 312E226C 69746365 6E222C41 [n",A1."litcen",A]
    20: 312E2263 6F64706F 73222C41 312E2263 [1."codpos",A1."c]
    30: 6F647072 6F76222C 41312E22 636F646D [odprov",A1."codm]
    40: 756E222C 41312E22 636F6465 636F6C22 [un",A1."codecol"]
    50: 2C41312E 22636F64 6573696E 222C4131 [,A1."codesin",A1]
    60: 2E226362 222C4131 2E226373 222C4131 [."cb",A1."cs",A1]
    70: 2E226469 6769746F 636F6E22 2C41312E [."digitocon",A1.]
    80: 22637565 6E746122 2C41312E 22736F6C ["cuenta",A1."sol]
    90: 6172222C 41312E22 636F6E73 74727569 [ar",A1."construi]
    A0: 646F222C 41312E22 646F6D69 63656E22 [do",A1."domicen"]
    B0: 2C41312E 2274656C 6566222C 41312E22 [,A1."telef",A1."]
    C0: 66617822 2C41312E 22636966 222C4131 [fax",A1."cif",A1]
    D0: 2E226C69 746C6F63 22204652 4F4D2022 [."litloc" FROM "]
    E0: 43454E54 524F5322 204131 [CENTROS" A1]
    and according to the trace the FoxPro ODBC driver doesn't like these quotes and reports a syntax error.
    So this explains at least why select codcen from centros@fox1 will fail. In general the Oracle database is case insensitive and translates all object names to upper case and the select it will pass to the foreign database would be similar to:
    select CODCEN from CENTROS => which will fail as FoxPro is case sensitive. So the error message ORA-00904 (missing column name) is correct and the statement you need to use is:
    select "codcen" from centros@fox1;
    But this might lead again to the Syntax error you got earlier => You need to check which sign (single quote, back tick, double quote) Foxpro uses to quote object names and then set the gateway parameter HS_FDS_QUOTE_IDENTIFIER accordingly.
    To check which character can be used to quote column/table names you might use the Microsoft ODBc test utility which was distributed in the old MDAC 2.8:
    http://www.microsoft.com/downloads/details.aspx?familyid=5067faf8-0db4-429a-b502-de4329c8c850&displaylang=en
    Edited by: kgronau on Jun 1, 2012 7:27 AM
    If you know where I can download the MS FoxPro ODBC driver, please let me know and I'll check.

  • Crystal Reports can't add stored procedure using Oracle Provider for OLE DB

    Hello,
    I am trying to bind an oracle stored procedure to a crystal report through Visual Studio 2008.
    This oracle stored procedure returns a ref cursor.
    I am using an oracle 11g database (11.2.0.2.0) .
    When I use the Oracle Provider For OLE DB driver to bind the store procedure with the report, I get the following error message:
    Description : ORA -06550 Line 1 Column 7
    PLS 00306 wrong number of types or arguments to the "Strored Procedure Name"
    But When I use the Microsoft OLE DB provider for oracle driver, I can bind the stored procedure to the report successfully .
    I cannot use the Microsoft OLE DB provider for oracle driver because it does not support the CLOB data type which I plan on having the stored procedure return once I can get everything working.
    I have tried setting PLSQLRSET = 1 IN "HKEY_LOCAL_MACHINE\SOFTWARE\KEY_OraDb11g_home1\OLEDB", but that does not seem to work either
    Any assistance would be greatly Appreciated
    My Stored procedure is very simple as the moment (I just need to get it working then I'll add more stuff). Here's what it looks like:
    CREATE OR REPLACE PACKAGE PROMO.PKG_REPORT as
    TYPE OUT_Type IS REF CURSOR;
    procedure Report_ThisReport (
    p_ThisIdField IN number,
    IO_CURSOR IN OUT OUT_Type
    end PKG_REPORT;
    CREATE OR REPLACE PACKAGE BODY PROMO.PKG_REPORT as
    procedure REPORT_ThisReport (
    p_ThisIdField IN number,
    IO_CURSOR IN OUT OUT_Type
    IS
    BEGIN
    OPEN IO_CURSOR FOR
    SELECT ThisField
    FROM ThisTable
    WHERE ThisIdField = p_ThisIdField ;
    END REPORT_ThisReport;
    end PKG_REPORT;
    Edited by: 894988 on Nov 3, 2011 2:45 PM
    Edited by: 894988 on Nov 3, 2011 2:46 PM
    Edited by: 894988 on Nov 3, 2011 2:47 PM

    It seems that some questions posted here on the XE forum are really questions about other Oracle technologies.
    Concretely, for you there is an Oracle Provider for OLE DB Forum that is active and a terrific resource for you to use.
    Oracle Provider for OLE DB
    Cheers!

  • Establishing Database connection for XML Data Definition?

    I have a XML Data Definition which will query data from Oracle Database.
    I did some research and tried few setting options in JDeveloper (11g), but had no luck on finding a way to connect to Database.
    My goal is to use JDeveloper to run a XML Data Definition against Database and generate a XML File with data.
    Can this be done?
    Data Definition:
    <?xml version="1.0" encoding="WINDOWS-1252"?>
    <dataTemplate name="XX_ATT_VALIDATION" description="description"
    dataSourceRef="MTS-AT"
    version="1.0">
    <properties>
              <property name="include_parameters" value="false" />
              <property name="include_null_Element" value="true" />
              <property name="include_rowset_tag" value="false" />
    </properties>
    <parameters>
              <parameter name="p_batch_id" dataType="character"/>
    </parameters>
    <dataQuery>
         <sqlStatement name="Q_HEADER_VALUES">
              <![CDATA[
    select distinct
    sci.bill_cycle,
    to_char(sci.bill_date,'mm/dd/yyyy') bill_date,
    to_char(sysdate,'mm/dd/yyyy') report_run_date
                   from st_cm_interface sci
                   where sci.record_type='05'
                   and sci.batch_id=:p_batch_id
              ]]>
    </sqlStatement>
    <dataStructure>          
         <group name="G_HEADER_VALUES" source="Q_HEADER_VALUES">
    <element name="bill_cycle" value="bill_cycle"/>
    <element name="bill_date" value="bill_date"/>
    <element name="report_run_date" value="report_run_date"/>
    </group>
    </dataStructure>
    </dataTemplate>

    Hi,
    Consider there is 2 database, Oracle_1 and Oracle_2.
    I want to fetch some table data in Oracle_2 from Oracle_1 database Stored procedure/functions through query staments and cursors. How to establish the Oracle_1 DB connection in Oracle_2 DB stored procedure/function. Is it possible?
    It's not the same how you implement the programs in java or .Net to create DB connection. It's different over here. You have use the DataBase Links in order to make to connection with another DB and use that Link in the stored procedure or function where ever its necessary as per your requirement.
    - Pavan Kumar N

Maybe you are looking for

  • Premiere Elements 12 Incompatible Display Driver problem

    I recently bought Adobe Premiere Elements 12 and installed it with no problem. I tried to run it but it keeps saying that my display drivers are incompatible. My AMD Radeon 6950 has up to date drivers and I even tried deleting the BadDriver.txt, but

  • Mac Mini HTPC on the cheap

    My one last grand parent is finally getting a TV in the next few months and I'd like to buy him a Mac Mini for it so he can watch his beloved films. I'm looking for advice on the software that's best. Bearing in mind he is an OAP, and currently has a

  • Class javax.crypto.SecretKey not found in import.

    While compilation i am getting this error. Class javax.crypto.SecretKey not found in import. I am not able to figure it out . Please help me for that. Is it related to some classpath setting.

  • How to handle BAPI RETURN message?

    Hi , I developed a bapi ,it is calling from java  application . i don't konw how to send the return message to java application .Pl any one help out this problem. Thanks&Regards, Pratap

  • Tabs won't save when closing the browser

    After updating to the latest firefox 33.0.2 it won't save my tabs or automatically reopen them the next time I open firefox. I already checked my settings and they are not the problem.