Using Oracle Virtualbox to stage a Oracle VM 3.1.1 demo enviornment

Below is a link to download the Virtualbox templates for Oracle VM 3.1.1. You will also find detailed instructions on implementing them....
http://www.oracle.com/technetwork/server-storage/vm/template-1482544.html
Also check out the PDF at the end of the page for complete details.
http://www.oracle.com/technetwork/server-storage/vm/ovm3-demo-vbox-1680215.pdf
I wish they had this around when I first built my demo environment.

Ok NAS server or iSCSI target server sounds good.
But can I avoid it ?
My virtualbox configuration guests:
ORACLEVM1 (Oracle VM Server n.1)
storage:
- oraclevm1/oraclevm1.vdi - sata/0 - 4gb normal -> /dev/sda
- oraclevm-luns/oraclevm-lun1.vdi - sata/1 - 10gb shared (*) -> /dev/sdb
ORACLEVM2 (Oracle VM Server n.2)
storage:
- oraclevm2/oraclevm2.vdi - sata/0 - 4gb normal -> /dev/sda
- oraclevm-luns/oraclevm-lun1.vdi - sata/1 - 10gb shared (*) -> /dev/sdb
(*) ORACLE VM Server share same virtulabox VDI disk
ORACLEVMM (Oracle VM Manager)
storage:
- oraclevmm/oraclevmm.vdi - sata/0 - 32gb normal
Can I set up for sharing OVS repository (mapping /dev/sdb) between VMs servers ? How to?
Edited by: REugeni on 29-mag-2012 12.45

Similar Messages

  • Re: Oracle Solaris Cluster 3.3 using Oracle Solaris 09/10 on virtualbox

    Dear All,
    I am trying to build a solaris cluster 3.3 on virtualbox using Oracle Solaris 09/10. My host OS is Ubuntu 10.10. But, when i try to add the second node, it is not able to find the node1 says "unable to connect to node1". Can anyone help me build this cluster.
    my laptop is hp probook 4420s and has i3 processor and 2gb ram, wherein i have assigned 750mb ram to both Oracle Solaris 09/10 OS. Moreover, the first node is successfully attached. Both the virtual machines can ssh succesfully and link based ipmp is setup on both the virtual machines. Please help me regarding this as i am new to clustering.

    As Nik said, this could be a problem with the setup of the private interconnects. This could also be caused by the fact that the necessary ports on the nodes are closed - due to secure by default.
    There is an old blog entry on blogs.sun.com by Thorsten Frueauf that explains how to open the ports and/or start the necessary services. I think it is also documented now as part of the normal installation manuals.

  • Can I use Oracle Developer Day.ova for learning purposes without any  license? #developerday

    Hi,
       I am a student and learning oracle database. I have found Oracle Virtual box appliance from following link Developer Day - Hands-on Database Application Development</title><meta name="Title" content="Dev…
       Do I need a license to use this VM?
       Please reply.
    Thanks,
    Tahir.

    Kunwar wrote:
    Hi friends,
    i have installed oracle db using Oracle Developer Day.ova for practicing on my lappie.
    I want to connect to that DB which is inside oracle vm virtual box manager using PUTTY ( which is on my desktop). I dont want to use the in-built workspace or Terminal(whatever is its name).
    Can you guys please suggest what should i do so that i can login to the DB using the PUTTY only (i love it )? i am not able to login to the host "localhost" using the putty.
    Few years back when i had installed vmware(linux installed in it and db installed on linux) i could connect through putty.
    I am using below entry in the hosts file.
    # localhost name resolution is handled within DNS itself. 
        127.0.0.1       localhost 
    #    ::1             localhost 
    'localhost' and its ip address of 127.0.0.1 are non-routeable.  Any request to send a network message to localhost will never leave the machine from which the request originates.  And for all intents and purposes, your virtual machine is a different machine.
    See my solution at
    http://edstevensdba.wordpress.com/2012/12/15/configure-the-virtualbox-network-2/

  • Using Oracle RAC VM tmeplates - Oracle Virtual Box

    Greetings - can any one guide me to use Oracle RAC vm templates using Oracle Virtual Box?
    Appreciated!

    There is no need to burn a DVD because Virtualbox can directly mount and boot from the .iso image you downloaded. It is usually a good idea to check the md5 checksum of your download with the number provided by the download page to verify your download is not corrupted. There are no problems installing any version of Oracle Linux under Virtualbox provided you have the right hardware. I suggest to check the Virtualbox documentation.
    Note: This is not a Virtualbox forum.

  • Install MAC OS X 10.63 on a PC using Oracle Virtual Box

    Hi I have a Sony VAIO PC I have tried to install MAC OS X 10.63 Snow Leopard using Oracle Virtualbox but it failed to boot from disc. I have spent 4 hours online with a justanswer.com analyst and he tried various things like copying to an isa and changing various settings but it did not work

    Virtual machine software makers won't violate Apple's EULA's.
    You can only run OS X on Apple hardware.
    However there is a solution if your willing to run Linux, it looks and acts like OS X (even better in some areas) and it's free to download and use.
    You won't be able to run OS X software, but free Linux software instead.
    The best way to go about this is to download and then install Linux Mint 10 (DVD 32bit Gnome) into your VirtualBox,
    http://www.linuxmint.com/release.php?id=15
    Next perform this Linux adjustment in terminal (in Linux)
    http://community.linuxmint.com/tutorial/view/326
    Once you do that then you can update Linux Mint via the Update Manager.
    What this will do is give you Linux Mint, which is the best Linux version (especially for newbies as everything is included), it has the gnome desktop based upon Ubuntu Linux, then after making the MacBuntu desktop switch you'll have a OS X looking UI on your PC in VirtualBox. (safer)
    The instructions work for Linux Mint 10, so that's why I gave you Linux Mint 10 link, even though Linux Mint is at 12, so you upgrade from within Linux Mint to 12 later got it?
    Search YouTube to see what MacBuntu looks like yourself.
    Remember your installing Linux into VirtualBox running under Windows, don't create a boot cd of Linux and install it directly onto your Windows machine without knowing full well what your doing as Windows could disappear as a result.
    Note: With Mac's we are pretty much stuck ONLY running OS X on our machines (and Windows 7), Apple doesn't support anything else, but on your PC hardware you can run any operating system you want, just not OS X.
    http://distrowatch.com/
    Good Luck

  • Error while creating a report that uses Oracle OCI JDBC connectivity

    Please let me know why my CR and LF characters are removed from my forum posting *****
    Hi,
    I was trying to create a report that uses Oracle OCI JDBC connectivity. I am using Eclipse3.4 download from "cr4e-all-in-one-win_2.0.2.zip".  I have successfully created a JDBC OCI connection.
    The connection parameters are given below:
    URL: jdbc:oracle:oci8:@xe
    Database: xe
    username: <userName>
    password: <password>
    I have tested the above connection in Data source Explorer and it works fine!!!
    But I am getting the following error when I drag-and-drop a table from the list of tables. Not sure what I am missing here?  Any help is highly appreciated.
    com.businessobjects.reports.jdbinterface.common.DBException: InvalidURLOrClassName
         at com.crystaldecisions.reports.queryengine.driverImpl.jdbc.JDBCConnection.Open(Unknown Source)
         at com.crystaldecisions.reports.queryengine.JDBConnectionWrapper.Open(SourceFile:123)
         at com.crystaldecisions.reports.queryengine.Connection.br(SourceFile:1771)
         at com.crystaldecisions.reports.queryengine.Connection.bs(SourceFile:491)
         at com.crystaldecisions.reports.queryengine.Connection.t1(SourceFile:2979)
         at com.crystaldecisions.reports.queryengine.Table.u7(SourceFile:2408)
         at com.crystaldecisions.reports.dataengine.datafoundation.AddDatabaseTableCommand.new(SourceFile:529)
         at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71)
         at com.crystaldecisions.reports.common.Document.a(SourceFile:203)
         at com.businessobjects.reports.sdk.requesthandler.f.a(SourceFile:175)
         at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.byte(SourceFile:1079)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1163)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:657)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:163)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:525)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:523)
         at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
         at java.util.concurrent.FutureTask.run(Unknown Source)
         at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$3.doWork(ExecutorWithIdleProcessing.java:182)
         at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(AbstractCancellableRunnable.java:69)
         at com.businessobjects.crystalreports.designer.core.util.thread.PriorityTask.run(PriorityTask.java:75)
         at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.runSubtask(PriorityCompoundCancellableRunnable.java:187)
         at com.businessobjects.crystalreports.designer.core.util.thread.PriorityProgressAwareRunnable.runSubtask(PriorityProgressAwareRunnable.java:90)
         at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.doWork(PriorityCompoundCancellableRunnable.java:144)
         at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(AbstractCancellableRunnable.java:69)
         at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$IdleTask.run(ExecutorWithIdleProcessing.java:320)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Thanks
    Karthik
    Edited by: KARTHIK1 on Oct 14, 2009 9:38 PM

    Hi Ted,
    Thanks for the feedback. I was able to create a report in Creystal Reports Designer 2008 using OCI.  It is not allowing only in the Eclipse plugin. In our environment we are not allowed to user Oracle thin connections and ONLY OCI is allowed.
    1) Can you please let me know if there is a way to do this? 
    2) Will it allow data sources using native database driver?
    3) If so, can I use JRC to create these reports from a desktop java program?
    Thanks & Regards
    Karthik
    Edited by: KARTHIK1 on Oct 15, 2009 4:38 PM

  • Help needed in using oracle rules SDK

    Hi,
    For testing my rulesets using oracle rules SDK I doing the following:
    1. Creation of dictionary, ruleSet.
    2. Declared two kinds of globalVariable variables in my datamodel :
    Final and non-Final.(Type of these varaibles are String and Double only)
    3. Final globalVaraibles are used in creating rule's patterns.
    4. Non-Final globalVariables are used in creating rule's action.
    5. Functions are created for asserting globalVariables values and
    returning non-final varaibles, since those are required as action
    results.
    6. In java code I am testing my ruleset (dict.testRuleSet()). Before
    testing i am populating my final global variables (since these are used
    in rule's patterns),
    and updating datamodel.
    The above procedure is working fine and I rules are successfully working.
    Now, first of all i want to know if the above mentioned approach is correct or it needs to be reframed??
    secondly, when i update datamodel with values (in java code itself) it
    takes 4-5 seconds in updating it. This is the main issue that why it is
    taking this much time??
    any comment would be of great help.
    Thanks in advance.

    I will send up an alert for you, Colin. Even though I use iTunes for Mac, troubleshooting it isn't my forté.

  • Compiling Apache 1.3.9 & PHP 3.0.12 to use Oracle 8.1.5 on SuSe 6.2

    Hi!
    I am trying to compile the above packets but am running into massive problems.
    PHP3 compiles well, if i try to use the "normal" static module for Apache, but the Apache configure script says that it needs an ANSI C compiler and stops.
    I am using GCC 2.7.2.3 with the bugfixes from SuSe.
    Since that did not work I tried the configuration as a Dynamic Module. The Apache "Readme.config" explains two ways to do so, but the first has the same problem with GCC and the second (via APXS) compiles Apache without problems, but PHP3 wont compile since it does not find a library. The exact error is: "/usr/i486-linux/bin/ld: cannot open -lclntsh: No such file or directory"
    I found a libclntsh.so.8.0 in the oracle/lib directory, but since i fumbled around with this library (i tried ln -s libclntsh.so.8.0 libclntsh.so) sqlplus says libclntsh.so.8.0: cannot find file data: no such file or directory (even now that the link is deleted again).
    And PHP still wont compile. Any ideas would be welcome.
    P.S.: Is it normal that Oracle has to be told NOT to create a database during install, TO create a database???
    We worked for 3 days on the Oracle installation and that was the only way to install Oracle without errors.
    thx
    Uwe Schurig

    Lee Bennett (guest) wrote:
    :Hi
    :I have successfully installed Oracle 8.1.5 Enterprise edition
    on
    :Suse 6.2 and applied the 8.1.5.0.1 patch set,
    NO!
    SuSe 6.2 have a patch file for Oracle made from their developers.
    Never use Oracle 8.1.5.0.1 patch file that doesn't work because
    us bugged.
    Use SuSe 6.2 Oracle patch set.
    (don't remember the web page where you can download it but a
    search with word "oracle" from SuSe homepage will lead you to
    it)
    -Stefano
    null

  • SSO and how to Managing User Roles/Privileges with Forms using Oracle db

    We are in the process of implementing Oracle Application Server SSO with our custom Forms application using Oracle database -- all 10.2.0.1.0 version.
    In our Forms Applications, we have about a dozen roles we have assigned to various users. We need to identify each user using our Forms because we are using the GLOBAL USER throughout the application.
    Questions:
    -- Do we have to create users/passwords in both OID and application database?
    -- Is there a way to easily manage the user and passwords between SSO and Forms App/database in one place? For example, how does a user change their password once, but actually change it in both the database and SSO?
    Any advice and/or direction would be greatly appreciated.
    Thank you,
    Mika
    Edited by: user11846198 on Sep 1, 2009 1:41 PM
    Edited by: user11846198 on Sep 1, 2009 1:53 PM

    Yes, you can have global roles in the DB and assign this roles to specific OID users, and the will heritage the privilages, you can do this using Oracle Identity Management Web Tool http://hostname:7777/oiddas is not complicated.
    Greetings.

  • Does sun Cluster 3.0/3.1 HA Oracle agent support to use Oracle spfile?

    When defining the resource, the 'parameter_file' properties is usually sets to the Oracle pfile. Is it possible to use Oracle spfile?
    It is said if leaving 'parameter_file' NULL, it will be default to Oracle default. Suppose leaving it NULL and with Oracle spfile created in default location, will it use the spfile?

    You did not specify which Sun Cluster version and Oracle version you are running.
    Within SC 3.1 my understanding is that beginning with Oracle 9i it is possible to use the spfile.
    If you leave the "parameter_file" property empty (NULL) then the default behaviour for 9i should work:
    search under $ORACLE_HOME/dbs in the order:
    1. spfile$(ORACLE_SID}.ora
    2. spfile.ora
    3. init${ORACLE_SID}.ora
    Greets
    Thorsten

  • Unable to connect to Oracle Database using Oracle Sql developer 2.1.1.64

    Hi Everyone,
    I am searching for some help regarding my problem with Oracle connectivity. I have installed Oracle 11g release 2 on my Windows XP Professional Laptop. For a few days after installation i could connect to the Oracle database with the SYSTEM account using Oracle SQL developer ( installed on the same Laptop) but now i am unable to do so.It gives me this annoying message:
    An error was encountered performing the required operation  Got a minus one from read call .Vendor code 0
    However i am able to connect using Sql Plus by supplying the username SYSTEM and the corresponding password.
    My TNSNAMES .ora file is as follows:
    ORACLE =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = ORACLE)
    ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
    (SID = CLRExtProc)
    (PRESENTATION = RO)
    My Listener.ora file is as follows:
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = CLRExtProc)
    (ORACLE_HOME = D:\app\product\11.2.0\dbhome_1)
    (PROGRAM = extproc)
    (ENVS = "EXTPROC_DLLS=ONLY:D:\app\product\11.2.0\dbhome_1\bin\oraclr11.dll")
    (SID_DESC =
    (GLOBAL_DBNAME = Oracle)
    (ORACLE_HOME = D:\app\product\11.2.0\dbhome_1)
    (SID_NAME = Oracle)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (PROTOCOL_STACK =
    (PRESENTATION = GIOP)
    (SESSION = RAW)
    ADR_BASE_LISTENER = D:\app
    My Sqlnet.ora file is as follows:
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    I am new to Oracle and so i need someone in this forum who can help me resolve this problem. Also i even tried connecting to the database using Toad 10.5.0.41. It give me the following error:
    ORA 12537 : TNS Connection closed
    Thanks for your patience and help in advance.
    ---Prashant

    Hello Irian and Sue,
    I can connect to the Oracle database using SQL Plus. Now when i TNSPING ORACLE from command line i get the following message :
    Used parameter files:
    D:\app\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =localhost
    *)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORACLE)))*
    TNS-12537: TNS:connection closed
    Thanks for your response to my initial post.Do u have any other methods to resolve this?

  • I am new to using Oracle, and I am trying to create an add/insert stored pr

    I am new to using Oracle, and I am trying to create an add/insert stored procedure for a table. The PROD_CD and PLAN_CD fields in my table can have no value (empty or null) Can you please check my code and let me know what I am doing wrong?
    Table definition:
    CREATE TABLE DCWEB.USER_PLAN_PREFERENCE
    USERID VARCHAR2(40) NOT NULL,
    PROD_CD VARCHAR2(9) NULL,
    PLAN_CD VARCHAR2(9) NULL,
    STATE_LST VARCHAR2(2) NOT NULL,
    STATE_NM VARCHAR2(40) NOT NULL,
    LST_UPDATE_TS TIMESTAMP(6) DEFAULT CURRENT_TIMESTAMP NOT NULL
    ALTER TABLE DCWEB.USER_PLAN_PREFERENCE
    ADD CONSTRAINT USER_PLAN_PREFERENCE_XPK PRIMARY KEY (USERID, PROD_CD, PLAN_CD);
    -- Grant/Revoke object privileges
    grant select, insert, update, delete on DCWEB.USER_PLAN_PREFERENCE to HIGGIB1;
    Stored Procedure Definition:
    procedure setUserPlanPref (
    userid in varchar2,
    prod_cd in varchar2,
    plan_cd in varchar2,
    state_lst in varchar2,
    state_nm in varchar2
    is
    currentTimestamp timestamp := current_timestamp;
    begin
    insert into user_plan_preference (userid, prod_cd, plan_cd, state_lst, state_nm, lst_update_ts)
    values (upper(userid), upper(prod_cd), upper(plan_cd), upper(state_lst), upper(state_nm), currentTimestamp);
    commit;
    exception
    when dup_val_on_index then
    begin
    update user_plan_preference up set
    up.userid = upper(userid),
    up.prod_cd = upper(prod_cd),
    up.plan_cd = upper(plan_cd),
    up.state_lst = upper(state_lst),
    up.state_nm = upper(state_nm),
    up.lst_update_ts = currentTimestamp
    where up.userid = upper(userid)
    and up.prod_cd = upper(prod_cd)
    and up.plan_cd = upper(plan_cd);
    commit;
    exception
    when others then
    rollback;
    end;
    when others then
    rollback;
    end;
    end;
    INPUT DATA
    I am unable to insert a record calling the stored procedure with values: DCWEB4578, , 2P, CA, CALIFORNIA but when I change to the string "NULL", the insert succeeds. When I try to call the stored procedure to update the inserted record with values: DCWEB4578, "NULL", 2P, CO, COLORODO the update does not happen since I still see the original record in the table. Please advise. Thanks in advance for your help.

    938319 wrote:
    I am new to using OracleWelcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and ensure you've updated your profile with a real handle instead of "938319".
    You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This should include:
    <li>Full APEX version
    <li>Full DB/version/edition/host OS
    <li>Web server architecture (EPG, OHS or APEX listener/host OS)
    <li>Browser(s) and version(s) used
    <li>Theme
    <li>Template(s)
    <li>Region/item type(s)
    With APEX we're fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
    Thanks for posting the complete code, it makes it so much easier to understand the problem, but always post code wrapped in tags<tt>\...\</tt> tags to preserve formatting and special characters.
    and I am trying to create an add/insert stored procedure for a table.Does this have anything to do with APEX, for which this is the forum? General SQL &amp PL/SQL matters should be directed to the {forum:id=75} forum.
    The PROD_CD and PLAN_CD fields in my table can have no value (empty or null) Can you please check my code and let me know what I am doing wrong?This:
               commit;
    exception
    when others then
    rollback;
    end;
    when others then
    rollback;Remove it all.
    Commits should be issued by end user/client software on completion of a transaction. This means <tt>commit;</tt> should almost never appear in PL/SQL code. The main exception to this is in <tt>dbms_job/secheduler</tt> scheduled processes that have no client or UI. If this code is executed from APEX, then APEX issues more than enough commits anyway.
    exceptions are just a way of ensuring your code is buggy.<tt>when others</tt> exceptions are just a way of ensuring your code is buggy.
    INPUT DATA
    I am unable to insert a record calling the stored procedure with values: DCWEB4578, , 2P, CA, CALIFORNIA but when I change to the string "NULL", the insert succeeds. When I try to call the stored procedure to update the inserted record with values: DCWEB4578, "NULL", 2P, CO, COLORODO the update does not happen since I still see the original record in the table. Please advise. Thanks in advance for your help.With the <tt>commit</tt>s and <tt>when others...</tt> removed from the code you'll have a chance of seeing what's actually happening. Note that the entire procedure can be simplified by writing as a MERGE</tt> statement.

  • I am using oracle Apps ERP in firefox wherein there is a Java Plugin , This is working fine in 3.5 version but as soon as i am upgrading to the latest version oracle is not working and firefox crashes. I can't upgrade even though i wish to

    We are using Oracle ERP in our company which is a web based ERP system. I am using firefox to work in ERP for convinieince pf working and using internet at the same time. This requires a plugin provided by oracle oajinit.exe to be installed in Plugins it is a JAVA plugin which opens the ERP Screens. This works fine in versions prior to 3.6 version of firefox. However, after upgrading to 3.6 version the forms do not open and firefox crashes. Due to this i am not able to upgrade to the latest version else i'll have to operate the ERP in internet explorer and using firefox for browsing which i do not want. The plugin used for the ERP is "* JInitiator 1.3.1.18 for Netscape Navigator (DLL Helper)"

    Firefox 3.6 needs the Java Second Generation Plugin which comes with newer versions than 1.6.0_03 - update Java, the latest version is 1.6.0_22

  • Custom Workflow using Oracle Workflow in ContentDB

    Hi,
    Could we use custom workflow which is made using Oracle Workflow instead of BPEL.
    Regards,
    Yulisar

    Having registered custom workflows for Content DB via Enterprise Manager, potentially you can use any tool capable of dequeuing/enqueing messages from the IFS_BPEL_OUT/IFS_BPEL_IN advanced queues as part of a custom workflow process.
    By default, we assume you are using Oracle BPEL PM with its Advanced Queue adapater to process the queue messages. However, there is nothing stopping using Oracle Workflow or any tool for that matter.
    HOWEVER!!! Warning!!! There is a high probability that Content DB will drop the bundled Oracle Worflow installation in the near future. What this means, is that you should consider installing/configure/patching your own separate Oracle Workflow installation and not rely on the bundled Content DB solution which is used internally for Serial and Parallel Approval workflows.
    thanks,
    Matt.

  • Exception while opening a JSP file created using oracle report builder

    I have created a JSP page which contains embedded Oracle reports build using Oracle Report Builder.
    I have deployed the JSP created above to the Oracle Application Server
    but when i try to open the JSP file it gives the following error:
    500 Internal Server Error
    javax.servlet.jsp.JspException: rwlib-1: REP-1202: ORACLE logon not specified. at oracle.reports.jsp.ObjectsTag.doEndTag(ObjectsTag.java:206) at testing.test1._jspService(_test1.java:75) [SRC:/testing/test1.jsp:0] at com.orionserver[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:567) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:208) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:125) at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:534)
    can anybody help regarding this
    this is of high priority to me
    thanks and regards
    Subhajit

    bump

Maybe you are looking for

  • I can't open quicktime or iTunes, help!

    When I try to open quicktime or iTunes, the little black arrow appears for a few seconds under the icon on my dock and then it says "The application Quicktime/ iTunes quit unexpectedly". I've had several mac problems and I'm getting VERY frustrated.

  • Read japanese char from oracle

    I have a database column stores japanese char in Shift-JIS encoding. A perl script can read the database and display the result on browser. But If i try the get the japanese string in Java using JDBC. I got an exception: String text = resultset.getSt

  • Error on tomcat server startup

    My tomcat server create java.lang.reflect.InvocationTargetException on startup and it managed to start the server. But servlet & jsp programs are not running in my web browser. How to solve this problem rather than reinstall the tomcat

  • Background image obscures the auto page numbering

    I have an 80 page book that I want to have automatic page numbering. All pages have a background image that bleeds off the page. The background image changes on every page. The document is currently set up with individual image boxes on each page rat

  • ALV Hierarchical With multiple boxes

    Hello. I have an alv hierarchical with multiple boxes. Can I  insert a buttom in Gui status of alv that allows me to  expand  all the boxes of  hierarchy? Regards Angela