Using Oracle VM server for SPARC 2.0 / LDOMs in production

Hi All,
Just wanted to check if people are using LDOMs in production?
I am thinking of using a T3-2 server with 2 processors (total of 32 cores) to host 6 to 7 guests - web server, couple of application servers, Oracle Internet Directory and Siteminder guests. Similarly upto 12 or more guests for test and development.
Any feedback on whether it is a suitable config to be used in production?
Can you please share a high level idea of your deployment in production?
Thanks,
Ninad

I have two T5440 with LDOM 1.3. Each has Guest Domains on internal disks.
I am looking for ways to re-build this configuration, so Guest Domains can be moved to other host when required.
I can see how shared storage or multi-host exported LUNs can be used here. But, is there any documentation on this I can look at ?
Could you clarify how NFS was used to share root disk of Guest Domains ? Here is my understanding of how you did it. Please correct me if I am wrong.
- NFS Server runs on a host other than your T6320. The shares it exports holds the underlying files that make up the VDSDEV device.
- All T6320 hosts mount nfs shares.
- Make sure any one domain is started only on one host.
- Domain is moved to other host using migration tool.
Again, if you could direct me to any documentation would be very helpful.
Thank you
Arjun

Similar Messages

Oracle VM Server for SPARC - network multipathing architecture question

This is a general architecture question about how to best setup network multipathing
I am reading the "Oracle VM Server for SPARC 2.2 Administration Guide" but I can't find what I am looking for.
From reading the document is appears it is possible to:
(a) Configure IPMP in the Service Domain (pg. 155)
- This protects against link level failure but won't protect against the failure of an entire Service LDOM?
(b) Configure IPMP in the Guest Domain (pg. 154)
- This will protect against Service LDOM failure but moves the complexity to the Guest Domain
- This means the there are two (2) VNICs in the guest though?
In AIX, "Shared Ethernet Adapter (SEA) Failover" it presents a single NIC to the guest but can tolerate failure of a single VIOS (~Service LDOM) as well as link level failure in each VIO Server.
https://www.ibm.com/developerworks/mydeveloperworks/blogs/aixpert/entry/shared_ethernet_adapter_sea_failover_with_load_balancing198?lang=en
Is there not a way to do something similar in Oracle VM Server for SPARC that provides the following:
(1) Two (2) Service Domains
(2) Network Redundancy within the Service Domain
(3) Service Domain Redundancy
(4) Simplify the Guest Domain (ie single virtual NIC) with no IPMP in the Guest
Virtual Disk Multipathing appears to work as one would expect (at least according the the documentation, pg. 120). I don't need to setup mpxio in the guest. So I'm not sure why I would need to setup IPMP in the guest.
Edited by: 905243 on Aug 23, 2012 1:27 PM

Hi,
there's link-based and probe-based IPMP. We use link-based IPMP (in the primary domain and in the guest LDOMs).
For the guest LDOMs you have to set the phys-state linkprop on the vnets if you want to use link-based IPMP:
ldm set-vnet linkprop=phys-state vnetX ldom-name
If you want to use IPMP with vsw interfaces in the primary domain, you have to set the phys-state linkprop in the vswitch:
ldm set-vswitch linkprop=phys-state net-dev=<phys_iface_e.g._igb0> <vswitch-name>
Bye,
Alexander.

Oracle VM Server for Sparc

I am going ahead with the Oracle VM server for Sparc in the next 6 weeks. Just one question I want to be sure of - do I put the OS of the base machine in the NetApp and NFS mount it or the base machine OS on local disk and all the LDOMs OS on NFS mounted on NetApp. I want to create a pool of two machines one with 2 T5-2 servers in it and another 4 T5-220 servers in it. My intention is to move LDOMS from one machine to the other within a pool, depending on the load.

Thanks Marcel. Sorry for the delayed reply as I was away. Yes, I did mean the control domain, but I also worried that NFS mount on NetApp may not work for LDOMs, as I read somewhere that Solaris does not support containers on NFS. I am a bit puzzled over here, as this means we may have to go for iSCSI route for all the VMs. iSCSI is untested in our Solaris environment, although heavily used on other things on NetApps. We also don't have any options but to use NetApps, as NetApps are being used in our two datacentres and it would be ideal for DR scenario.
Regards
Sujit

Oracle VM Server for SPARC support san

hello all
Oracle VM Server for SPARC SANdoes not support it? a server pool does not support the use of san quorum，or storage Repository does not support of ocfs2 file system format？

Thanks Marcel. Sorry for the delayed reply as I was away. Yes, I did mean the control domain, but I also worried that NFS mount on NetApp may not work for LDOMs, as I read somewhere that Solaris does not support containers on NFS. I am a bit puzzled over here, as this means we may have to go for iSCSI route for all the VMs. iSCSI is untested in our Solaris environment, although heavily used on other things on NetApps. We also don't have any options but to use NetApps, as NetApps are being used in our two datacentres and it would be ideal for DR scenario.
Regards
Sujit

Oracle VM Server for SPARC 2.2 Released

We are pleased to announce the availability of Oracle VM Server for SPARC 2.2 release. See the announcement at Oracle's Virtualization Blog - https://blogs.oracle.com/virtualization/entry/announcing_oracle_vm_server_for1 .
Please review the Oracle VM Server for SPARC 2.2 Documentation http://docs.oracle.com/cd/E35434_01/index.html for specific details of required and minimum software and supported platforms. Visit the download page http://www.oracle.com/technetwork/server-storage/vm/downloads/index.html for instructions to download the required software.
Edited by: Honglin Su on May 24, 2012 10:22 AM

S11 networking has "vanity naming" enabled by default (so things are named net0, net1, etc) - if you run 'dladm show-phys' you should be able to work out which one is from the vsw device.
Note: unlike on S10, with S11 you don't need to plumb the vsw in order to get connectivity between the guests and the control domain.
This might also help: https://blogs.oracle.com/raghuram/entry/ldoms_networking_in_solaris_11

Oracle VM Server for SPARC 2.1 - cannot config vsw0 in Solaris 11

Any tips for getting it to work with Solaris 11? I tried following the steps outlined in Administering Oracle VM Server for SPARC 2.1, but it fails on the "ifconfig vsw0 plumb" command with:
ifconfig: cannot plumb vsw0: Object not found

S11 networking has "vanity naming" enabled by default (so things are named net0, net1, etc) - if you run 'dladm show-phys' you should be able to work out which one is from the vsw device.
Note: unlike on S10, with S11 you don't need to plumb the vsw in order to get connectivity between the guests and the control domain.
This might also help: https://blogs.oracle.com/raghuram/entry/ldoms_networking_in_solaris_11

Oracle VM Server for SPARC MIB for Solaris 11 Not available

Hi,
From the 2.1/2.2 Release Notes - The Oracle VM Server for SPARC MIB software is only available on Oracle Solaris 10 systems.
Anyone know when MIB software will be available on Solaris 11 ?
Thanks
Andy

We're on it (7082776 RFE: Need LDoms MIB support on S11), coming in next release.

What all Operating System are Supported on Oracle VM Server for Sparc ?

hi,
Does Oracle VM Server for Sparc Support's Solaris OS of different version
or it also supports linux & windows OS also...
thnaks in advance....

The modern SPARC platform ( sun4v ) is locked in Solaris. No chances for open-source OS'es like Linux or *BSD.
This is because the important hardware documentation is closed ( known only to Sun / Oracle engineers ). For example:
  * virtualization features of CPU are documented only at hypervisor-call level (part of Sun servers' firmware), and only partially.
  * CPU errata are closed ( Some errata for old UltraSPARC III were opened during OpenSolaris project, but that's all).
  * crypto features ( SPU and MAU ) are closed.
-- Konstantin

Where is the Oracle VM Server for SPARC 3.2 SW download?

Where is the Oracle VM Server for SPARC 3.2 SW download?
Tips leading to a successful download of the correct SW may be rewarded with German beer.

Many thanks for your answer.
Can you point me toward something, which I can show our customer indicating when 3.2 will be GA for Solaris 10?

Oracle VM Server for SPARC Management Platforms

Upon doing some nominal research, I see that the Oracle VM for x86 platform is significantly more robust (at least at first glance) with regards to migrations/interface/etc. Where is the equivalent of Oracle VM Manager for SPARC? Is the Oracle Enterprise Manager with Virtualization Managment pack the tool that most people are using? Our virtualization offering, centers around the market share leader with regards to x86, at least at current. We would like to boost our product line with a similar service built on SPARC but it seems as if the product is too young to do that? I'm hoping that I'm wrong and just haven't found the right documentation. I'm also trying to get an appointment set up with the sales team to discuss.

It's true there does seem to be a wide gap in the UI aspect of Oracle VM for SPARC vs. Oracle VM x86. Personally I like the UI for the x86 platform better than the OEM 11g with Ops Center plugin for LDoms. However, I believe both UIs lack some robustness. In our case, we currently do not use a UI (for many reasons, mainly bugs and lack of certain CLI functionality). In the SPARC arena, it is extremely simple to script everything for the Oracle VM SPARC product (including HA scenarios). Once we build out the infrastructure, almost everything we do (provisioning, reporting, decommissioning) is done via simple perl scripting which is the power of not having a UI. However, a better UI for Oracle VM for SPARC is desirable for managing multiple environments/groupings, etc..

Oracle VM software for SPARC T4-4 server

Hi All,
I am looking for oracle vm software download for SPARC t4-4 sever.
I searced and found below reply....
Download Oracle VM Server for SPARC 2.2 software from My Oracle Support, search patch ID 14054041 (for Solaris 10);
Is this the right or latest software ( oracle VM) ??
if not can you please let me know where I can download oracle vm software for SPARC t4-4 server.
I am on solaris 10.
Thanks.

Yes, that is the latest version available.

Unable to start Oracle Reports Server for 10g version 10.1.2.3.0

Attention Oracle Reports Team or anyone else:
I am unable to start the Oracle Reports Server for 10g version 10.1.2.3.0 of the Application Server.
I have included the trace files see below. I marked the text in bold that might indicate the issues.
Any help will be greatly appreciated. Thank you.
Reports engine rwEng trace file:+
[2010/7/8 10:11:51:626] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
[2010/7/8 10:11:51:627] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/rwEng-0.trc
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
[2010/7/8 10:11:51:628] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:51:678] Info 50128 (RWEngine:init): orb init succeeded
[2010/7/8 10:11:52:108] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
[2010/7/8 10:11:52:108] Debug 50103 (EngineImpl:init): useDataCache = null
[2010/7/8 10:11:52:108] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
[2010/7/8 10:11:52:115] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
[2010/7/8 10:11:52:116] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
[2010/7/8 10:11:52:117] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2010/7/8 10:11:52:117] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
*[2010/7/8 10:11:58:329] Error 50103 (C Engine): 10:11:58 ERR REP-3000: Internal error starting Oracle Toolkit.*
*[2010/7/8 10:11:58:329] Error 50103 (C Engine): 10:11:58 ERR REP-3000: Internal error starting Oracle Toolkit.*
[2010/7/8 10:11:58:330] (C Engine)
[2010/7/8 10:11:58:330] (C Engine)
               | Reports Builder Profiler statistics |
[2010/7/8 10:11:58:330] (C Engine)
[2010/7/8 10:11:58:330] (C Engine)
TOTAL ELAPSED Time: 6.06 seconds
[2010/7/8 10:11:58:331] (C Engine)
Reports Time: 6.06 seconds
[2010/7/8 10:11:58:331] (C Engine) (100.00% of TOTAL)
[2010/7/8 10:11:58:331] (C Engine)
ORACLE Time: 0.00 seconds
[2010/7/8 10:11:58:331] (C Engine) ( 0.00% of TOTAL)
[2010/7/8 10:11:58:331] (C Engine)
UPI: 0.00 seconds
[2010/7/8 10:11:58:332] (C Engine)
SQL: 0.00 seconds
[2010/7/8 10:11:58:332] (C Engine)
TOTAL CPU Time used by process: 1.08 seconds
[2010/7/8 10:11:58:340] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000
[2010/7/8 10:11:59:129] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
[2010/7/8 10:11:59:130] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
[2010/7/8 10:11:59:131] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:59:179] Info 50128 (RWEngine:init): orb init succeeded
[2010/7/8 10:11:59:593] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
[2010/7/8 10:11:59:593] Debug 50103 (EngineImpl:init): useDataCache = null
[2010/7/8 10:11:59:594] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2010/7/8 10:11:59:597] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
[2010/7/8 10:11:59:598] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
[2010/7/8 10:11:59:599] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2010/7/8 10:11:59:600] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
*[2010/7/8 10:12:5:757] Error 50103 (C Engine): 10:12:05 ERR REP-3000: Internal error starting Oracle Toolkit.*
*[2010/7/8 10:12:5:758] Error 50103 (C Engine): 10:12:05 ERR REP-3000: Internal error starting Oracle Toolkit.*
[2010/7/8 10:12:5:758] (C Engine)
[2010/7/8 10:12:5:758] (C Engine)
               | Reports Builder Profiler statistics |
[2010/7/8 10:12:5:758] (C Engine)
[2010/7/8 10:12:5:759] (C Engine)
TOTAL ELAPSED Time: 6.06 seconds
[2010/7/8 10:12:5:759] (C Engine)
Reports Time: 6.06 seconds
[2010/7/8 10:12:5:759] (C Engine) (100.00% of TOTAL)
[2010/7/8 10:12:5:759] (C Engine)
ORACLE Time: 0.00 seconds
[2010/7/8 10:12:5:760] (C Engine) ( 0.00% of TOTAL)
[2010/7/8 10:12:5:760] (C Engine)
UPI: 0.00 seconds
[2010/7/8 10:12:5:760] (C Engine)
SQL: 0.00 seconds
[2010/7/8 10:12:5:760] (C Engine)
TOTAL CPU Time used by process: 1.01 seconds
[2010/7/8 10:12:5:769] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000
[2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0
[2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[1]=server=myreportserver
[2010/7/8 10:12:6:475] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[5]=tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_append
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[7]=cacheDir=/myoraclehomepath/reports/cache
[2010/7/8 10:12:6:476] Debug 50103 (RWEngine:init): args[8]=server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:12:6:523] Info 50128 (RWEngine:init): orb init succeeded
[2010/7/8 10:12:6:942] Info 55007 (EngineImpl:loadLibrary): Load librw.so succeeded
[2010/7/8 10:12:6:942] Debug 50103 (EngineImpl:init): useDataCache = null
[2010/7/8 10:12:6:942] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2010/7/8 10:12:6:946] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = myreportserver
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = /myoraclehomepath/reports/cache
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = /myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc
[2010/7/8 10:12:6:947] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_append
[2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null
[2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2010/7/8 10:12:6:948] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null
*[2010/7/8 10:12:13:91] Error 50103 (C Engine): 10:12:13 ERR REP-3000: Internal error starting Oracle Toolkit.*
*[2010/7/8 10:12:13:91] Error 50103 (C Engine): 10:12:13 ERR REP-3000: Internal error starting Oracle Toolkit.*
[2010/7/8 10:12:13:91] (C Engine)
[2010/7/8 10:12:13:92] (C Engine)
               | Reports Builder Profiler statistics |
[2010/7/8 10:12:13:92] (C Engine)
[2010/7/8 10:12:13:92] (C Engine)
TOTAL ELAPSED Time: 6.05 seconds
[2010/7/8 10:12:13:92] (C Engine)
Reports Time: 6.05 seconds
[2010/7/8 10:12:13:92] (C Engine) (100.00% of TOTAL)
[2010/7/8 10:12:13:93] (C Engine)
ORACLE Time: 0.00 seconds
[2010/7/8 10:12:13:93] (C Engine) ( 0.00% of TOTAL)
[2010/7/8 10:12:13:93] (C Engine)
UPI: 0.00 seconds
[2010/7/8 10:12:13:93] (C Engine)
SQL: 0.00 seconds
[2010/7/8 10:12:13:93] (C Engine)
TOTAL CPU Time used by process: 1.02 seconds
*[2010/7/8 10:12:13:102] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 3000*
reports engine rwURLEng trace file:+
*** 2010/7/8 10:11:47:306 -- Reading server config file /myoraclehomepath/reports/conf/myreportserver.conf
*** 2010/7/8 10:11:47:307 -- <server version="10.1.2.3.0">
<cache class="oracle.reports.cache.RWCache">
<property name="cacheSize" value="50"/>



</cache>


<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="30" callbackTimeOut="90000">


</engine>
<engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="30" callbackTimeOut="90000"/>


<destination destype="ftp" class="oracle.reports.plugin.destination.ftp.DesFTP">

</destination>
<destination destype="WebDav" class="oracle.reports.plugin.destination.webdav.DesWebDAV">

</destination>


<job jobType="report" engineId="rwEng" securityId="rwSec"/>
<job jobType="rwurl" engineId="rwURLEng" securityId="rwSec"/>
<notification id="mailNotify" class="oracle.reports.server.MailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>

<log option="noJob"/>

<trace traceOpts="trace_all" traceMode="trace_append"/>
<connection maxConnect="20" idleTimeOut="15">
<orbClient id="RWClient" publicKeyFile="clientpub.key"/>
</connection>
<queue maxQueueSize="1000"/>




<pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>
<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>
<pluginParam name="textpds" type="file">textpds.conf</pluginParam>
</server>
*** 2010/7/8 10:11:47:308 -- Reports Server is starting up
*** 2010/7/8 10:11:51:982 -- Reports Server started up engine rwURLEng-0
*** *2010/7/8 10:12:13:175 -- Shutting down engine rwURLEng-0*
*** *2010/7/8 10:12:13:177 -- Reports Server shut down engine rwURLEng-0*
*** 2010/7/8 10:12:13:178 -- Server is shutting down
Why does the rwURLEng engine start up and then immediately shut down?+
reports server trace file:+
[2010/7/8 10:11:47:276] Debug 50103 (EnvironmentUtility:getEnvironment): XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): DEBUG_SLFIND=/myapppath/log/mydebuglogfile.log
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): DISPLAY=myhostname:0.0
[2010/7/8 10:11:47:277] Debug 50103 (EnvironmentUtility:getEnvironment): LD_LIBRARY_PATH=/myoraclehomepath/jdk/jre/lib/sparc:/myoraclehomepath/lib:/myoraclehomepath/opmn/lib:/myoraclehomepath/lib32
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORACLE_CONFIG_HOME=/myoraclehomepath
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORACLE_HOME=/myoraclehomepath
[2010/7/8 10:11:47:278] Debug 50103 (EnvironmentUtility:getEnvironment): ORA_NLS33=/myoraclehomepath/ocommon/nls/admin/data
[2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): PATH=/myoraclehomepath/jdk/bin:/myoraclehomepath/bin:/myoraclehomepath/jdk/bin:/myoraclehomepath/bin:/myoraclehomepath/dcm/bin:/myoraclehomepath/bin:/myoraclehomepath/Apache/Apache/bin:/myoraclehomepath/opmn/bin:/myoraclehomepath/dcm/bin:/bin:/usr/bin:/etc:/usr/ccs/bin:/usr/local/bin:/usr/ucb:/usr/sbin:/export/home/oracle:/usr/bin:/bin
[2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_CLASSPATH=/myoraclehomepath/reports/jlib/rwbuilder.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar:/myoraclehomepath/j2ee/home/oc4j.jar:/myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/oraclebarcode.jar
[2010/7/8 10:11:47:283] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_DEFAULT_DISPLAY=NO
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_NO_DUMMY_PRINTER=TRUE
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_PATH=/myapppath/bin:/myapppath/util/bin:/myoraclehomepath/guicommon/tk/admin/TTF:/myoraclehomepath/reports/templates:/myoraclehomepath/reports/samples/demo:/myoraclehomepath/reports/integ:/myoraclehomepath/reports/printers
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TAGLIB_URI=/WEB-INF/lib/reports_tld.jar
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TMP=/tmp
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): RW=/myoraclehomepath/reports
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): SHELL=/usr/bin/ksh
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TK_DEBUG_POSTSCRIPT=Func/L/Mem
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TK_ICON=/myoraclehomepath/reports/plugins/resource
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TMP=/tmp
[2010/7/8 10:11:47:284] Debug 50103 (EnvironmentUtility:getEnvironment): TNS_ADMIN=/myapppath
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): TZ=US/Eastern
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): X_LD_LIBRARY_PATH_64=/myoraclehomepath/lib
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
[2010/7/8 10:11:47:285] Debug 50103 (EnvironmentUtility:getEnvironment): REPORTS_TMP=/tmp
[2010/7/8 10:11:47:308] Info 56025 (RWServer:startServer): Reports Server is starting up
[2010/7/8 10:11:47:503] Debug 50103 (JobManager:start): Using Maximum Job Retry value = 0
[2010/7/8 10:11:47:526] Info 65000 (Multicast:init): Communication channel initialized
[2010/7/8 10:11:47:528] Debug 50103 (Multicast:registerReceiver): Packet handler registered
[2010/7/8 10:11:47:529] Info 50103 (ServerPacketHandler:start): ServerPacketHandler started successfully
[2010/7/8 10:11:47:532] Info 50103 (RWServer:startServer): Using multicast mechanism
[2010/7/8 10:11:47:562] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
[2010/7/8 10:11:48:561] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
[2010/7/8 10:11:49:572] Debug 50103 (ServerPacketReceiver:handleRequestPacket): Received packets. Multicast is working
[2010/7/8 10:11:50:589] Info 56023 (ServerImpl:ServerImpl): Idle thread has been started
[2010/7/8 10:11:50:691] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2010/7/8 10:11:50:691] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:11:51:56] Info 50103 (RWLocaleUtility:RWLocaleUtility): Using oracle.i18n.util.LocaleMapper class
[2010/7/8 10:11:51:58] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:51:95] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2010/7/8 10:11:51:95] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
[2010/7/8 10:11:51:97] Info 56020 (EngineManager:spawnEngine): Launching engine rwURLEng-0
[2010/7/8 10:11:51:98] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:11:51:99] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwURLEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.urlengine.URLEngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwURLEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:51:129] Info 56021 (EngineManager:spawnEngine): Engine rwURLEng-0 has been launched
[2010/7/8 10:11:51:129] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Initial
[2010/7/8 10:11:51:131] Debug 50103 (JobStore:writePersistFile): Purge persistent file
[2010/7/8 10:11:51:169] Debug 50103 (JobStore:writePersistFile): Purge persistent file done
*[2010/7/8 10:11:51:981] Warning 50103 (EngineManager:registerEngine): REP-55103: API URLEngine:getEngineEnvs not applicable to URL engine*
[2010/7/8 10:11:51:982] Info 56026 (EngineManager:registerEngine): Reports Server started up engine rwURLEng-0
[2010/7/8 10:11:51:998] Debug 50103 (EngineManager:updateEngineState): Engine rwURLEng-0 status is 1
[2010/7/8 10:11:51:998] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Ready
[2010/7/8 10:11:58:490] Info 50103 (EngineManager:manage): Engine restart count: 1
[2010/7/8 10:11:58:590] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2010/7/8 10:11:58:590] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:11:58:592] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:11:58:623] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2010/7/8 10:11:58:624] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
[2010/7/8 10:12:5:832] Info 50103 (EngineManager:manage): Engine restart count: 2
[2010/7/8 10:12:5:932] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2010/7/8 10:12:5:934] Info 50103 (EngineManager:spawnEngine): OS Name = SunOS : OS Arch = sparc
[2010/7/8 10:12:5:935] Debug 50103 (EngineManager:spawnEngine): Start engine command line = /myoraclehomepath/bin/rwengine.sh -server -cp /myoraclehomepath/j2ee/home/lib/ojsp.jar:/myoraclehomepath/reports/jlib/rwrun.jar:/myoraclehomepath/jlib/zrclient.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=myreportserver ORACLE_HOME=/myoraclehomepath engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=/myoraclehomepath/reports/logs/myreportserver/rwEng-0.trc tracemode=trace_append cacheDir=/myoraclehomepath/reports/cache server_ior="/tmp/myreportserver_xxxxxxxx_xxxxxxxxxxxxx"
[2010/7/8 10:12:5:963] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2010/7/8 10:12:5:964] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
*[2010/7/8 10:12:13:174] Exception 56105 (): Engine rwEng-0 died with error:*
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.utility.Utility.newRWException(Utility.java:758)
     at oracle.reports.server.EngineManager.manage(EngineManager.java:367)
     at oracle.reports.server.IdleThread.run(IdleThread.java:88)
*[2010/7/8 10:12:13:175] Info 56029 (EngineManager:shutdownEngine): Shutting down engine rwURLEng-0*
[2010/7/8 10:12:13:176] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Shutdown
[2010/7/8 10:12:13:177] Info 56047 (EngineManager:remove): Reports Server shut down engine rwURLEng-0
[2010/7/8 10:12:13:177] Info 50103 (ServerPacketHandler:stop): Multicastmanager stopped successfully
[2010/7/8 10:12:13:178] Info 50002 (RWServer:shutdown): Server is shutting down
[2010/7/8 10:12:13:178] Info 50103 (RWServer:startServer): Notify thread to exit
Why does the trace file indicate that the rwEng engine died with error?+
Again why does the rwURLEng engine start up and then immediately shut down?+
Thank you for your help on this issue.+

OK, I did this once and did not follow the oracle docs
If you saved your targets.xml before you started you might save it by renaming it back.
(Double check to make sure you did not miss a rename)
Otherwise, all I have to offer is my rough notes:
1. Backup the file $ORACLE_HOME/sysman/emd/targets.xml.
[oracle@ias02 emd]$ pwd
/u01/app/oracle/product/midtier/sysman/emd
cp targets.xml targets.xmlbackup
2. Modify the file targets.xml by changing all the occurrences of the wrong reports server name by the correct one.
i.e. Replace rep_test_midtier with rep_new (4 places - changes)
Copy the conf file as follows: ( this will named different from system to system )
cp /u01/app/oracle/product/midtier/reports/conf/rep_pia_oracleas.conf /u01/app/oracle/product/midtier/reports/conf/rep_fam.conf
run this script:
/u01/app/oracle/product/midtier/bin/addNewServerTarget.sh rep_fam          (change rep_fam to new report server name)
3.Update the changed configuration .
/u01/app/oracle/product/midtier/dcm/bin/dcmctl updateconfig -ct opmn -v -d
/u01/app/oracle/product/midtier/dcm/bin/dcmctl resyncinstance -v -d
4. Restart the Application Server Control Console
/u01/app/oracle/product/midtier/bin/emctl stop iasconsole
/u01/app/oracle/product/midtier/bin/emctl start iasconsole
In the file:
/u01/app/oracle/product/midtier/reports/config/reportsConfig.properties
Change the Reports_Server_Name setting from rep_test_midtier to rep_fam (change rep_fam to new report server name)
Best Wishes (I was able to save mime)
The other option is to reinstall

Difference between Oracle VM on Linux x86 and Oracle VM Server for x86 on Linux x86

Hi,
Under the certifications tab for EBS 11.5.10.2, there are two fields for Virtualization software
1. Oracle VM
2. Oracle VM Server for x86
Oracle VM shows version 2.2.0.0.0 and Oracle VM Server for x86 shows version 3.2.6.0.0. Could you please let me know the difference between the two?
Thanks
Sarika

Hi,
Oracle VM shows version 2.2.0.0.0 and Oracle VM Server for x86 shows version 3.2.6.0.0. Could you please let me know the difference between the two?
Oracle VM 2.2 is for Oracle Solaris Sparc platform (Earlier know as Sun Logical Domains) - Only Solaris sparc Installation are supported on VM's
2.2 Installing Oracle VM Server on SPARC Hardware
Oracle Vm 3.2 is for X86 platform - using this VM you can Install and create Windows/Linux/Solaris-X86 and other certified OS.
Oracle VM Release 3.2 Product Documentation Library
Hope its clear
regards,
X A H E E R

Companion CDs for 64-bit Oracle HTTP Server for AIX5L(64 bit) required.

I need Companion CDs for 64 bit Oracle HTTP Server for AIX5L(64 bit).
I tried to install using
as_ibm_aix_companion_101300_disk1.cpio & as_ibm_aix_companion_101300_disk2.cpio
but when i checked the files present in <Oracle_Home>/ohs/lib , they are of 32-bit.
Also i tried with Oracle 10.1.2.0.2 but still the server is installed as 32-bit.
Is 64-bit Oracle HTTP Server supported on AIX5L(64 bit) ?
If yes, then from where can i download the CDs?
Any suggestions will be appreciated.

Greetings,
Try this link:
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201aixsoft.html
Regards,
Bill Chadbourne

Oracle BI Publisher - can not access Shared Folder , using Oracle BI Server

Hi there,
We have an installed OBIEE and BIP (BI Publisher) system which is the security setting of BIP using "Oracle BI Server".
Our OBIEE security is using the combination of LDAP (authentication) and Relational Table (for grouping user privillege)
The integration connection between OBIEE and BIP is successfull, and I can connect using Administrator to the BIP
But when I assign a general user using group : XMLP_Admin (define in rpd file and relational table), the user can log in to BIP, but can NOT access the Shared Folder.
the error desc : "Error 500: SRVE0199E: OutputStream already obtained"
Anyone can help ?
Thanks a lot
-toni

Did you define Roles and Permissions to the shared folder from BIP Admin?
-Prakash

Using Oracle VM server for SPARC 2.0 / LDOMs in production

Similar Messages

Maybe you are looking for