Using OracleVM in VMWare - Network problem

Hi,
I'm desperately trying to install OracleVM in VMware workstation - just for testing purposes of course. However I simply cannot connect to the VM manager once it has installed...
When the installation is complete, it says to connect to .... go to http://127.0.0.1/em. Obviously this is wrong as it is the address of the local machine relative to itself. I have installed OracleVM server & manager 7 times now attempting to try different networking options to get it working - but no luck.
I currently have OracleVM Server & Manager installed inside a VMware VM. Networking is set to NAT (but have also tried Bridged and host-only). ifconfig in client gives this:
https://www.sugarsync.com/pf/D851631_6278798_671551
When using bridged, Oracle VM server is at least able to ping the outside world (pinged google to test), however in NAT mode this fails too.
Have already tried doing a ifup eth0 - but no luck here either.
Any clues?
Thanks

This article has some good info http://appletoolbox.com/2011/03/facetime-activation-error-could-not-sign-in-plea se-check-your-network-connection-and-try-again-fix/ and there is also Apple's FaceTime troubleshooting page http://support.apple.com/kb/HT4319. Maybe these will help.

Similar Messages

CS4 "Already in use cannot delete" over network problem

Hello,
I am having a problem with a Mac on OS X not being able to open or delete any .ai files over a network on a Dell Server running Windows Server 2008. If we try to open or delete the file I get an error message "Already in use cannot delete". Also, I get a "cannot complete copy" error too. Whats weird is that both machines can see each other over the network and the Mac can read and write to all other files over the network. The server does not have anything adobe products installed at all. There is no other machine on the network that is causing these files to be in use. I have checked when the backups are done using Windows Server 2008 Backup and they are finished before anyone gets into the office, so I dont believe its the Backup program holding the files hostage. I have read in some areas that this may be a known flaw with NTFS formatting over a network, but im not sold on that idea yet.
Any and all suggestions would be as useful to me as insulin right about now.

Sorry one last thing. I can delete the files on the Server itself.

Vmware network problem

I'm running Archlinux on Vmware Workstation 6.5.
During installation It set up network and downloaded some packages.
I had options of manual, DHCP, etc. and I choosed DHCP, everything worked and all, and I downloaded the packages...
After installation was done I rebooted and thought I should install xorg through pacman.
When I booted back into Arch first thing I did was,
ifconfig eth0 up && dhcpcd eth0
Then to make sure It was up and all, I did
ping 192.168.1.1
(my router)
So far, so good.
Then (correct me if I'm wrong), I thought I should update my system and all, and I did a
pacman -Su
Took like ages, tho. But finally everything worked.
For some reason I figured I should reboot (for forks, daemons, dependencies, etc.)
I did the same thing as before (setup the network with dhcpcd).
Then for instalation of xorg I did:
pacman -S xorg
, first I got some Y/n's (I did Y[es] on both of them), then It seems to be an error about failure retrieving the packages from core database. (I'm sorry I can't post the error message on account I have deleted the vmware-image, since it seemed to hate me..)
Bottom line:
Have anyone else had this problem? If so ... help?

Unsuccessful bump, is unsuccessful.

When I try to update itunes, I get this message "the feature you are trying to use is on a network resource that is unavailable how do I solve this problem?

I am having a problem updating my iTunes. I get a message that says "the feature you are trying to use is on a network resource that is unavailable. Can anyone tell me how to uninstall iTunes?
I get this message either when I download a new iTunes or try to uninstall it. I am using Windows 7 64.
Thanks

I get a message that says "the feature you are trying to use is on a network resource that is unavailable.
Which particular .msi file (or files) does the message (or messages) go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

I am having problems updating my itunes to the latest version, on each stage I am getting a message 'The feature you are trying to use in on a network resource that is unavailable.' I try to click OK it fails and I do not know an alternate path to select

I am having problems updating my itunes to the latest version, on each stage I am getting a message 'The feature you are trying to use in on a network resource that is unavailable.' I try to click OK it fails and I do not know an alternate path to select, please help?
I get message like below on each stage of the update, Quicktime, Safari & iTunes;
It's so annoying as until I update my iTunes account my phone won't sync.

Many thanks for the screenshot. (The key to these is knowing which particular .msi file is being mentioned by the message.)
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
(Assuming that the QuickTime and Safari messages were also citing bonjour64.msi, you should also then be good to go with those installs too.)

Hi guys i got problem apple software Update i got masage .The feature you trying use is on a network resource that is unavailable. Click OK to try again,or enter an alternate path to a folder containing the installation package i Tunes.msi' in the box bel

hi guys i got problem apple software Update
i got masage
.The feature you trying use is on a network resource that is unavailable.
Click OK to try again,or enter an alternate path to a folder containing the installation package i Tunes.msi' in the box below
and i cant find anything please help

This forum is for questions about Apple Remote Desktop, Apple's software for managing networked Mac systems, and hence not the best place for your question. I'd suggest asking in the iTunes for Windows forum. You'll need to include more details, including the version of Windows you have, before anyone can do more than guess as to the problem.
Regards.

Uploading using Adobe Premiere Elements 12 Network problems

Hi,
Is there a place in Adobe Premiere Elements 12 that we can insert our company proxy details, the reason being. When I go to Publish and Share and click "Social Websites" and want to upload a video to youtube and push next it gives the following error "Online Services encountered an error. The services will be terminated or paused if possible."
If I use a 3G card it allows us to upload. Our network must be blocking this link or programme, yet we have made sure from our side adobe is not blocked on the network and I have access to all websites.
My question is can we insert proxy details somewhere or can I get the link of where that link is taking us to when pushing next trying to upload with youtube via adobe . I know it is going to youtube but I need the exact URL to make sure we allow this link to work.
Anyone have the answer for me?

MaudeSt
This is not Adobe. Rather user to user. For network problems when using the current version which is now Premiere Elements 12, please contact Adobe via its Adobe Chat.
Click on the following link, and then find and click on Chat Panel to discuss
Premiere Elements
Downloading, Installing, Setting Up
Downloading, Installing
Chat Panel
Contact Customer Care
I have set the web page to the Chat Panel level. If it does not hold the setting, then you will need to navigate to Adobe Chat using the topics
above as guidelines. If you end up seeing only Ask the Community instead of Chat Panel, then try again later. Chat has been having in times
when it is unavailable due to updating. It is an on and off situation lately. Chat has the option to do remote control of your computer for
troubleshooting purposes. We do not.
At the moment that I am hitting the "Add Reply" for this post, only Ask the Community option is being displayed at the Adobe Chat contact link.
Please let us know the outcome.
Thank you.
ATR

I had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!

had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!

first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the revo uninstaller http://http://www.revouninstaller.com/revo_uninstaller_free_download.html. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
next download itunes. it worked for me hope this is helpful!!
oonce you get into the revo uninstallergo thru to delete itunes hit uninstall on the itunes icon then you will go thru to it will tell u the same nmessage about the feature and network hit cancell then go thru and hit scan (make sure bthe advance scan button is pushed) this will take awhile but go thru the list and hit everything associated with itunes. hit delete then install itunes again. it worked for me hope it works for you!

Hi i am having problems connecting to internet using ethernet,in the network diagnostics i get all green,except network settings which is orange.i am running mountain lion on intel imac

hi i am having problems connecting to internet using ethernet,in the network diagnostics i get all green,except network settings which is orange.i am running mountain lion on intel imac

hi have done as you said plug ethernet straight into computer and into back of router,and worked straight off,i had the the powerline on extention when imac was up stairs,when i had computer down stairs it still would not work with powerlines even on main wall sockets,so they are getting binned,looks like i will have to move router upstairs,just wondering if i got extention wire from back of openreach box to router upstairs```,would it be ok,,the openreach box is next to my only phone socket in house,which is in back kitchen..any advice would be great,

I am in Thailand and have True internet is this why I can't use Face time. I get the message I have network problems when I log in.

I am in Thailand and have True internet is this why I can't use Face time. I get the message I have network problems when I log in.

Is the Face Time Service avabial in Thailand?

I keep getting a message telling me that my message failed :network problem but only to one number that used to work fine, it is my sons number!

Could someone please help me with this it is driving me crazy here! I keep getting this message when I try to send my son a text! It says there is a network problem and the message failed. what do i do to correct this on my samsung galaxy note 4? It only happens with his number and I have tried all the trouble shooting help things and nothing works.

I'm very sorry to hear there is a error when texting your son. I'd like to help figure this out with you. Which phone does your son have? When did the error start? Does either device have any physical or liquid damage?
VanetrisC_VZW
Follow us on Twitter @vzwsupport

VERY weird OVM networking problem

First, this may have nothing to do with OVM, but the problem I'm seeing is happening on all FIVE of my VM servers. I can't even guess what's going on. Maybe you have seen this and solved it, or maybe you can suggest what I can do to debug this.
Here are the details:
I have a 3-node cluster, built from brand new IBM x3650 M4 servers. I have a 2-node cluster, built from old retired IBM xSeries servers that used to be VMWare ESX servers. My office is on another subnet from the data center network that contains all 5 servers. I see the following symptoms occasionally and randomly (I see it at least once a day, and can make it happen multiple times a day if I keep trying):
1. When I SSH to one of these boxes, sometimes the session will freeze. At other times, the session will work perfectly, but after exiting the SSH session, any subsequent attempt to ping or connect via TCP from my desktop to that server will absolutely fail. That is, ping, traceroute, and ssh (and presumably, everything) failes.
2. If I don't try to communicate with that server for several minutes (maybe 5 to 10 minutes, I'm not sure), and then try to ping or SSH to the box, it works again!
3. However, if after, say, exiting SSH, and finding that I can't ping the server, if I keep pinging (from Windows, I say "ping -t -w 5000 vmserver") the pings will fail FOREVER. I have left it pinging for 24 hours, and it would never answer a ping. But then if I stop the pinging, wait ten minutes, and ping again, it works. I swear.
4. During the time that I am unable to ping one of VM servers from my desktop, if I try to ping that same server from another desktop machine in my office, connected to the SAME little 4-port switch, it works perfectly.
5. This is ever more weird: During the time that my desktop 1 cannot ping server1, say, I can go go desktop 2 (right beside desktop 1), open an SSH session to server1, and from there, I can ping desktop1. I swear.
Why would I think this is an Oracle VM problem, you ask? Well, I wouldn't, except that I have other servers in that data center, that run ESX, and AIX, and Windows, and I've tried like hell to make one of them exhibit one of these symptoms, and I cannot do it.
If you have any ideas about what the heck is going on, I'd appreciate hearing them.

Doesn't sound like a VM problem to me. Sounds like you either have a spanning tree loop or you've got a lot of packet collisions causing issues.
I don't know how much you know about networking but a spanning tree loop is when you have multiple paths connected to the same physical network without using load balancing or multipathing. You can have multiple connections between physical networks but it must be configured properly or you'll have one link come up and the other go into blocking mode. you'll never know which one it might be. That is.... if the links have the same cost. Thus you get a "loop". If the ports are "floping". You'll have times when its up and times when its down. Your network admin should be able to see if the spanning tree is constantly be rewritten. That is a sure sign you have a network loop.
You said you have a 4 port switch? If that switch is set on a port that's set to do "portfast" then the switching fabric will never learn what's behind that switch. You just can't plug a switch into a network and expect it to work. Again, I don't know what you know about networking so don't take it the wrong way.
Packet collisons happen when you have a link between equipment where one side negotiates to a different speed than another. Say one side is 100 half duplex while the other end is 1000G Full duplex. You get massive amounts of collision and it will only get worse the more traffic you try to pass. Again. You mentioned a 4 port switch. You should never assume that switches will ever negotiate at the same speed on each end of the connection. Cisco has historically recommended that inter switch links be hard code to avoid 'negotiation" issues. Its not a big a difference in 1 gb siwtchiing and 10 gb switch but if you have a 100 mb 4 port switch hooked into a 1gb link..... that might be your problem. Just some thoughts.
IF you really were having a VM issues. The cluster heartbeat would be causing the VM servers to constantly reboot. So I don't think its on you servers. Probabily between you and the servers.

New MBP - wireless/internet access networking problem - a summary!

Greetings!
New MBP here, with all the trimmings (MacOS X 10.4.10 - Safari 3 Beta). New also to the Apple/MAC world
MBP >> wireless networking into a Linksys WRT54G router and >> thru HughesNet DW7000 Satellite Internet connection (not the fastest, but hey, the US and especially rural areas are NOT S. Korea when it comes to speedy internet connections!
Frankly, I bought into it for two reasons: First, hearing about the vaunted Mac a/v/ and doc/photo editing capabilities,... and about MacOS stability, etc... Well, it all needs a little work still: on the part of new users like me, but also probably on the part of the Apple/Mac people as well. 2nd reason I decided to purchase the MBP - i.e. ability to run Windows (I have not yet tried BootCanp, etc...: still resolving preliminary issues!). I still live in a heavy Win environment at my business - no other way of course!
Communications issues seem to still prevail: I am hanging out at several VERY HELPFUL forums (AppleDiscussionForum, MacRumorsForums, etc...) and the same issues keep popping up. Im my case, same as all above reported, with a few additional points, as follows:
1. Xmission errors: seem to be - at least in my case - a constant factor, regardless on how close/far i am from my wireless router. For example, I would be attempting to dwnload an upgrade (large)QT or MacOS file. i am barely into the dowmoad, and I already have several Read/Send errors. By the end of the download, I will have probably about 15 Rcv and 5 Send errors. Never gets quite that bad in my Win machines, I must mention. Anything to do here (I know, there are such things always affecting wireless com). AND, MOST importantly, how that this affect the effectiveness of the upgrade (I spotted same thing with MacOS 10.4.10 and Safari Beta 3 upgrade downloads!). Would it be likely that applying upgrades in such circumstances would screw up the OS??? Could OTOH such errors be automatically "compensated" by re-xmits from the source, and eventually the download would be OK? Because quite frankly, I do NOT know if my important upgrade download was OK to apply to the system, given those errors!!!
Also same thing with PING errors. Quite frequent when pinging another device on my network.
2. Quite often, accessing a site will proceed somehow OK, and then things will get stuck twd the end, as if some buffer somewhere gets overloaded??? Of course, as elsewhere reported, same can often happen with com getting stuck right over the "www" part of the URL!
3. AND, of course, the often reported "NO connection to the Internet", but computer shows good signal level and connection otherwise.
4. Strangely enough, seems that the Airport Extreme wifi card sort of "warms up the the internet" as one proceeds to start using it. It eventually picks up on a network, and often "improves" its connection over time!
5. Built in Airport Extreme seems to not exhibit up all immediately surrounding networks. Sensitivity issue?? iStumbler does.
6. iStumbler permanently posts noise level of 9% regardless of how close to my wireless router/broadband modem I am. Anyone uses iStumbler to monitor network traffic?
This is getting longuish: I just want to get over all those p*ant issues and get into putting my a/v stuff together!!
- Roger T
Thanks for just reading all this!. I am not sure it is all fixable (back to the Win "features" terminology, really meaning "bugs"??)

Thanks, BDaqua. This support forum is quite well stocked: I have been perusing all its nooks and cranies!
On the www.dslreports.com - All things Mac - forum, I spotted a couple of mentions of the following type of infromation:
link: »www.hardmac.com/news/2007-07-27/#7039
- The first TechNote provides information concerning the Airport problem affecting the MBP Santa Rosa (but also other Mac Intel). When used on battery, the wireless connection drops and one can even experience kernel panic. Apple Centers are asked not to exchange affected notebook as this is due to a unidentified bug in the Atheros driver, and should be fixed in the future with a simple Airport system update. So for the moment, unfortunate users are asked to directly power their notebook when using wireless network, or using Ethernet connection when running on battery... in other words, turn your notebook into a desktop
to forum · permalink
I am wondering if you and folks on this close-to-Apple forum know anything about this. At least, we could just await remedy instead of messing around endlessly looking for solutions and... pondering as to whether it was a wise thing to purchase an expensive machine which happens to have trouble communicating online. After all, seems that the Mac folks are prone to spend MORE time online uploading/downloading music and videos instead of my being normally doing with the rest of my (Win) computers, i.e. work on customer lists, correspondence, inventories, accounting, data bases, etc....
So, seems to me we do have a pb and Apple might just save a few $$$ on silly ads and get to work on com instead. if nothing else to avoid the appearance of further - admittedly rather funny - ad-spoofs!
So back to your further inquiry. I run a wireless network from a HughesNet satellite modem, thru a Linksys WRT54GL wireless router, into some nearby office LANed desktops and point of sale equipment, to another neighbouring facility via wireless bridge, and to my Mac laptop. Distance from the laptop to the router: 50 ft max.
It all works surprizingly very well: up to 200kbps up and 1000 kbps down (in prime time, 150 up and 600 down). OK, my set up looks complex and incurring LOTS of activity. Actually, online activity is quite minimal and well scheduled - right now I am the only machine on the network online. Otherwise, our office processes online money wiring for customers among other things.
I'll try your DNS server choice on the Mac settings first. Will report accordingly.
Thanks for everything!
- Roger T

SmartWebPrinting.msi feature I am trying to use is on a network that is unavailable how do i fix it?

I have bee having problems with SmartWebPrinting.msi it keeps loading up everytime i try to get on the internet or open one of my programs on my computer these are the mesges I am recieving from it: 1. the feature you are trying to use is on a network resource that is unavailable. 2. Enter an alternate path to a folder containing the instalation package 'SmartWebPrinting.msi in the box below. 3. An installation package for the product SmartWebPrinting.msi cannot be found try the installation again using a valid copy of the installation package SmartWebPrinting. msi. I am unable to load a web page correct and pages are missing and I cannot view web pages. and it wont go away and i put in the cd and it still keeps saying the same thing What do I do?
Thank you

Hi there,
Try uninstalling Smart Web Printing using the instructions in this document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01812475&cc=us&dlc=en&lc=en
1. Expand the + sign next to: How do I upgrade from HP Smart Web Printing to HP Smart Print
2. Follow the steps under: Step one: Uninstall HP Smart Web Printing software (and then expand the + sign next to the operating system you are using)
You can then install HP Smart Print (which has the same features as Smart Web Printing) if you have a need for this software (following the instructions in this document).
Thanks!
Tara
**Although I am an HP employee, I am speaking for myself and not for HP.

HP OfficeJet 6500 (E709a) network problems

Hello. I have a new HP OfficeJet 6500 (E709a) Its all in one. I am trying to use it through a network in my home.
It is already working for 1 computer, a wireless laptop BUT not for me, a ethernet wired desktop.
PC: Windows 7 64 bit
Laptop: Windos Vista (dont know if 32 or 64) Using the printer succesfully wireless.
Well the problem is when trying to scan the printer or computer won't detect each other BUT I can print from my pc to the printer.
I installed it through the PC Add a Printer because everytime I tried it with the program downloaded from HP it wouldnt detect, EVER my connected and already tested printer. I can access the printers webpage, the 0.0.0.0.0 something page. I even tried the advanced installing way, manually typing the address the printer has but it would still not work.
I installed everything by selecting I would wire my printer later but to continue the installation I must find a way for it to detect my pc or the otherway around.
This question was solved.
View Solution.

Yes, plug the printer into your router with an Ethernet cable the run the Add Device in the Hewlett-Packard folder (Start > All Programs).
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Using OracleVM in VMWare - Network problem

Similar Messages

Maybe you are looking for