Using OS command

Hi ,
I am doing file to idoc scenario. I am getting the file in zip format. File adaptor poll the file in zip format, Now my requirement is to extract the file in text format before content conversion .... can we use the OS command option in sender file adaptor configuration if yes then how????
Thanks in advanve
Regards
Swatantra

Stallin,
What Prakash is saying is:
First interface will read the zip file from sender location. In receiver or in sender you use your OS command to unzip the file and get us a text file.
Create a Second interface which reads your text file and do the necessary content conversion and create a file if your scenario is Zipfile - XI - File scenario or create a IDoc if your scenario is Zipfile - XI - IDoc.
Hope this helps you......
---Satish

Similar Messages

  • Using Shell commands in AWK

    Hi, i want to use tr command in awk. Please guide me. Also, how to use shell variables in awk?

    please help

  • Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.

    Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.
    First my organize has Exchange on 2 site like
    site A (internet facing) : 2CAS 2 MB all are Services pack1
    site B (DR Site , no user active on this site) : 2CAS 2MB all are Services pack 1
    so today I upgrade Exchange 2013 from SP1 to CU5 start on "site B" and I found this issue and the details is....
    When I open EMS on any CU5 for query something (like get-mailboxdatabasecopystatus) the response return very slow and some query will not return at all (like get-owavirtualdirectory).
    But If I using EMS on SP1. Everything is ok then I try to use EMS on SP1 connect to CU5 and try to query something. the result is
    some query command cannot return for any result that are server on siteB (just some query command)
    Problem
    EMS on CU5 return very slow result.
    EMS on SP1 still ok.
    Does anyone face this problem before for CU5??? Please help me figure this out. Thank you
    reply from Social.technet

    Hi,
    Have you used the above cmdlets to check your Exchange server health?
    "all other command that I ran on EMS didn't logged on event viewer.", my environment is the same with you. I use Exchange 2013, only errors will be displayed in MSExchange Management. Actually, it is not related to slow EMS response.
    Hope it helps.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Unable to delete files from encrypted external SD Card using File Commander

    I've run into some trouble trying to delete the directory com.spotify.music from my external SD Card (encrypted) after a hard reboot using the reset button next to the sim card.
    I need to do this for the Spotify app to work (FC on starting it) and I'm currently unable to delete the folder and its contents from Sony provided file explorer(FC File Commander).
    Is there a way to delete this app from adb or other command line tool or how should I go about this? Developer options are enabled because I'm learning to develop apps. Not particularly keen on rooting or otherwise format my SD Card but it's an option if there are no other ways to do it. 
    I can see the contents of my card using File Commander just fine. Spotify app is uninstalled, I tried remove cache and data before uninstall also.

    Thommo wrote:
    Are you able to delete files via your Pc or are you able to remove the card from your phone and connect it to a Pc for file deletion - There is a free program called Unlocker currently on version 1.9.2 which is excellent at deleting files that don't want to be deleted - You would install the program then right click the file and choose Unlocker and then when the program starts choose delete
    I guess he will not be able to move the SD card to the computer since it's encrypted and is working only with that particular device, but he should be able to access it via PC.
    If you can try to uninstall Spotify from your phone. I assume Spotify is not working due to some rubbish inside it's directory, but on the other hand you can't delete the folder because it may be used by Spotify. If you uninstall app folder may be unlocked.
    Best regards,
    Sergio PL
    Xperia Z1 / Nexus 7 (2012)

  • Not able to extract performance data from .ETL file using xperf commands. getting error "Events were lost in this trace. Data may be unreliable ..."

    Not able to extract  performance data from .ETL file using xperf commands.
    Xperf Commands:
    xperf –i C:\TempFolder\Test.etl -o C:\TempFolder\BootData.csv  –a process
    Getting following error after executing above command:
    "33288636 Events were lost
    in this trace. 
    Data may be unreliable
    This is usually caused
    by insufficient disk bandwidth for ETW lo
    gging.
    Please try increasing the minimum
    and maximum number of buffers
    and/or
                    the buffer size. 
    Doubling these values would be a good first at
    tempt.
    Please note, though, that
    this action increases the amount of me
    mory
                    reserved
    for ETW buffers, increasing memory pressure on your sce
    nario.
    See "xperf -help start"
    for the associated command line options."
    I changed page size file but its does not work for me.
    Any one have idea, how to solve this problem and extract ETL file data.

    I want to mention one point here. I have total 4 machines out of these 3 machines above
    commands working properly. Only one machine has this problem.<o:p></o:p>
    Hi,
    I consider that you can try to use xperf to collect the trace etl file and see if it can be extracted on this computer:
    Refer to following articles:
    start
    http://msdn.microsoft.com/en-us/library/windows/hardware/hh162977.aspx
    Using Xperf to take a Trace (updated)
    http://blogs.msdn.com/b/pigscanfly/archive/2008/02/16/using-xperf-to-take-a-trace.aspx
    Kate Li
    TechNet Community Support

  • How can I use unix commands from oracle report

    I have to use the following command from oracle reports.
    In oracle forms we can use the HOST command but what about oracle reports2.5.
    I have to email the attached file 100245.pdf from oracle reports to the given email id
    uuencode 100245.pdf 100245.pdf | mailx -s "test" [email protected]

    Hi,
    It's because .bat (or .cmd) files are scripts and not executables and are interpreted using the command line executable - which is normally cmd.exe (although you can buy others).
    So you need to call cmd.exe passing the bat file name as a parameter, something like
    cmd.exe /c batchfilename
    Without the /c you will never get a response.
    However, this brings us to the bizarre conclusion that you are going to:
    call cmd.exe (a shell interpreter)
    to launch a batch file
    that calls cygwin (another shell interpreter)
    which then runs ls
    When shouldn't that just be:
    call cmd.exe to run the dir command
    Or better yet, If you are just after a file name listing and you seem to understand Java stored procs, why not just write a JSP to list the contents of a directory? No problems with OS dependant commands, scripts and 3rd party interpreters. Plenty of examples of that out on the internet as well.
    HTH
    Chris

  • How to use Filter commands in WAD?

    Hello community,
    I am desperately trying to use the command wizzard in order to set a Filter to a chrarcateristic in an 7.0 web template:
    I have been trying these commands so far but it simply doesnt work:
    SET_SELECTION_STATE_SIMPLE
    SET_SELECTION_STATE
    My problem is: When I select the charcateristic which I want to Filter, I get always the Error message, that the characteristic is not a valied characteristic or structure of the Query. But this is not true, the Characteristic is in the query. I have tried for hours now but no success.
    Thanks for any help or advice.
    Carl

    Hi Carl,
    I had the same situation. All you have to do is to update your support package. After that it will work properly.
    I have - Support Package 7, Revision 571
    Regards
    Erwin
    Edited by: Erwin  Buda on Dec 5, 2008 9:47 PM

  • How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

    How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

    Hi.
    You simply can't. Snow Leopard is compiled in Intel binary only.
    Good Luck.

  • How to delete the items in the recycle bin permanently from the windows using Diruse command

    How to delete the items in the recycle bin permanently from the windows  using Diruse command.
    Because most of the time we get out of disk space issues.
    Can somebody help me in giving with an example

    You can right-click Recycle Bin|Properties and choose radio button for
    Don't move files ....
     This one may also help.
    http://technet.microsoft.com/en-us/library/cc784980(v=ws.10).aspx
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Preserve a single space at the end of line using spool command

    Hi,
    Can you please help me to write the result of an sql query into a file with the last column of the row ending with a single space?
    For example:
    COL1DATA|COL2DATA|COL3DATA<space1>
    As mentioned in the example the col3 value in the file should end with a single space. And there should not be any delimiters at the end of the row.
    I tried with set trimspool on/off. But, it didn't work. When I say trimspool on - it is trimming all the trailing spaces.
    When I say trimspool off - it is retaining all the trailing spaces to the size of the line.
    But, I do not wish to modify the file through shell commands once it is written thru spool. I mean I do not wish to append spaces to the end of a line using shell script or any other method.
    I do not wish to use other methods like UTL_FILE also.
    Please help me how to do it using spool command?
    Thank you.
    Ramana

    My requirement is that all the trailing spaces should be truncated except the last one in the row.Why?
    As you have discovered a single column in sqlplus, is always a fixed length regardless of the size of the data, if the length of the data varies the output is padded to the maximum or line size with spaces. The trim and trimpsool commands are there to remove all the spaces from the end of a line if there are any. There are no commands to trim all the spaces except one, or even to trim all the spaces except two, or three even.
    If you want such custom processing you should post process the file in the OS using sed, awk or perl or something designed for such things.

  • How to get IMEI number of ME using proactive command

    Can anyone send me a sample code to get IMEI number of mobile equipment using proactive commands....

    Hi,
    I hope its can help you.
    private static final byte TAG_IMEI = (byte) 0x14;
    byte result=0;
    short IMEI_LEN;
    byte[] imei_buf;
    ProactiveHandler ProHdlr;
    ProactiveResponseHandler ProRespHdlr;
    ProHdlr = ProactiveHandler.getTheHandler();
    ProHdlr.init(PRO_CMD_PROVIDE_LOCAL_INFORMATION, (byte) 0x01, DEV_ID_ME);
    result = ProHdlr.send();
    if (result < RES_CMD_PERF_SESSION_TERM_USER) {
    ProRespHdlr = ProactiveResponseHandler.getTheHandler();
    IMEI_LEN = ProRespHdlr.findAndCopyValue((byte) TAG_IMEI, imei_buf, (short) 0);
    Cheers,
    Asep

  • Appending a creation date/time stamp to a filename using MS Command Language

    I need to access the creation date and time of an existing file and then append that date/time to the filename using MS command language in a .bat file.  The code executes on a Windows server.   I'm looking at different options for doing
    this.  I know it can be done using MS Powershell scripting.  Any other suggestions appreciated.  Thanks

    I tested the answer you supplied here:
    http://social.technet.microsoft.com/Forums/en-US/38873a13-f3f2-40f2-bb96-c1c63722caab/adding-a-datetime-stamp-to-a-file-using-ms-command-language?forum=winserverpowershell
    and it worked.
    Richard Mueller - MVP Directory Services

  • Error while trying to export my database using this command

    Hi,
    I am trying to export my database using this command :
    expdp system/manager@db1 full=n schemas=kul4231 dumpfile=kul4231_20091122.dmp logfile=kul4231_20091122.log directory=dump_dir1
    Error:
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    ORA-31626: job does not exist
    ORA-31637: cannot create job SYS_EXPORT_SCHEMA_05 for user SYSTEM
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
    ORA-06512: at "SYS.KUPV$FT_INT", line 600
    ORA-39080: failed to create queues "KUPC$C_1_20091122101110" and "" for Data Pump job
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
    ORA-06512: at "SYS.KUPC$QUE_INT", line 1606
    ORA-01008: not all variables bound
    DB version : Release 10.2.0.4.0
    all ideas are welcomed!!!!!!!!!!!! let me know where am i going wrong!!!!!!!
    thanks in advance..!!!!!!!!
    venkat.

    What is your SGA settings? (especially streams_pool_size).
    You can try to bump streams_pool_size to 100M if your current setting is below that.
    Regards
    Tomasz K.

  • Is it possible to run a java program without using the command prompt?

    Hi,
    I was wondering whether it is possible to run a Java program (not an applet) without using a command line in the command prompt?
    Basically I want to run a program that will be continually running in the background and hence I don't want to have a command prompt screen loaded up as well - I just want the program to be running in the task bar.
    I know how to run the program in the task bar - but I still need to launch the program from the command prompt - is there anyway I can get a program running without having to start it from the command prompt?
    Cheers

    Or create a desktop shortcut (in Windows) or an application launcher ( in Linux GUI).

  • ERROR MESSAGE WHEN USING PACK COMMAND   Missing file ////presenter.css   Also:  "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course."  I have Java enabled in all browsers

    ERROR MESSAGE WHEN USING PACK COMMAND   Missing file ////presenter.css    Command then fails
    Also:  "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course."  I have Java enabled in all browsers
    Thoughts?  Using Presenter 10  Win 8.1  Intel I7  new HP with plenty of memory
                   Thanks

    I had saved one copy as an .asp but then resaved it to .xhtml 
    I'm assuming this is a static web site.  Rename (F2) all your pages with .html or .htm extension. 
    .xhtml is not a valid extension.
    Nancy O.

  • Use Host command in Oracle forms 6i

    hi
    all
    i use Oracle forms 6i i run in a web and in that i have connect one server so,
    i have to use Host Command and i have to fire this command
    host (' net use \\windchillsvr\e\jyotionline /user:dwg_users dwg_users');
    But it's Not Connect
    My Forms in run in Web
    so help

    JavaBean does d othe job for you but it requires signing process; I used it when I was working on forms6i for our project.
    I could use another approach that is the file type command executable which it stays in client's PC to do it and it does not requires signing at all since I am now working on the Java EE project for downloading and launching the third party tool in client's PC.
    I plan to write a article for forms use, which could do all the heavy WebUtil can do, but not need to go thru the signing process.

Maybe you are looking for