Using Pageflow with pop-up windows

Has anyone tried to invoke a nested pageflow in a pop-up window? There's a bit
of a problem if you open a new window to a different, albeit nested, pageflow.
The original pageflow essentially loses all its data. Here's what I have:
1.) A Pageflow portlet that works fine
2.) another nested pageflow
3.) I want my portlet to open a new window to the nested pageflow described in
step 2.
4.) I create a netui:anchor to the pageflow with a "target" that opens a new window.
5.) If i go back to my portlet and try to do anything my form bean appears to
have been re-initialized.
Is there any way around this?
Thanks,
-jeff

Jeff,
Please post this question on the weblogic.developer.interest.portal
newsgroup.
Regards,
Raj Alagumalai
Backline Workshop Support
"Jeff Smith" <[email protected]> wrote in message
news:3f71f37b$[email protected]..
>
Has anyone tried to invoke a nested pageflow in a pop-up window? There's abit
of a problem if you open a new window to a different, albeit nested,pageflow.
The original pageflow essentially loses all its data. Here's what I have:
1.) A Pageflow portlet that works fine
2.) another nested pageflow
3.) I want my portlet to open a new window to the nested pageflowdescribed in
step 2.
4.) I create a netui:anchor to the pageflow with a "target" that opens anew window.
5.) If i go back to my portlet and try to do anything my form bean appearsto
have been re-initialized.
Is there any way around this?
Thanks,
-jeff

Similar Messages

Can anyone tell me how to get rid of tlb search? it unfortunately entered into my mac. Whenever I use safari, a pop-up window opens with some ads. Please help me to find a way to remove this malware.

Can anyone tell me how to get rid of tlb search? It unfortunately entered into my mac. Whenever I use safari, a pop-up window opens with some ads. Please help me to find a way to remove this malware.

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Having trouble with pop-up windows and ads for MacKeeper

I've been having trouble with pop-up windows and ads for MacKeeper and similar "services." Tried to download "MPlayerX" a week ago and it all started then. I thought I deleted the file but I'm still having trouble. I've been digging for solutions on here, but nothing I've found on here has worked yet--the VSearch stuff (I think) isn't on my hard drive. Any advice?

You installed a variant of the "VSearch" trojan. Remove it as follows.
This malware has many variants. Anyone else finding this comment should not expect it to be applicable.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.venus.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.venus.daemon.plist
/Library/LaunchDaemons/com.venus.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/venus
/System/Library/Frameworks/v.framework
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Anyone having problems with pop up windows?

Very recently (roughly just after performing the most recent Security Update) I have had trouble with pop up windows in Safari. Haven't had the problem before and the strange part is that my setting to block pop up windows keeps becoming unchecked in the Safari menu. My workaround has been to refresh the page, which removes the pop up, and then re-check the block pop up window option. Next time I open up Safari, I get the pop up again and my setting is unchecked.
Anybody else have this experience. Any malicious software out there that might be causing this? Any suggestions?
Thanks,
jack
G4/933 Quicksilver 2002; Boot ROM 4.3.3f2 Mac OS X (10.4.9) Safari 2.0.4 (419.3), MyYahoo homepage

Hi
Welcome to Apple Discussions
Oddities in Safari happen, not from viruses etc, but from some of the complexities of the program itself. In this case, a corrupted preference file may be causing the problem.
In the Finder, drag to the desktop the com.apple.safari.plist folder found in your User Account>Library>Preferences folder.
Restart Safari. Select the pop-up block. Quit/Restart Safari.
If the pop-up selection held, you'll need to reset your Safari preferences to your liking, plus any custom settings found in the Edit Menu (spelling) or View Menu (status bar, bookmarks bar, custom icons in the "Customize Address Bar" ).
Otherwise, move the file back to its original location.
Post back

I have problems with pop up windows after earlier today I updated the software

I have a macbook pro, and I updated the software today, I have OS X 10.9
After I did this I started having problems in safari with pop up windows, before it only happened with some sites, but now almost every site I try to open it also opens
pop up windows, and some sites have underlined words that link to other sites for advertising.
I really don't know what to do and I've read several posts of people that also have had my problem but I don't the solutions.

Mail troubleshooting - Yosemite
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
SMTP servers keep going offline

Problem with Pop up windows and struts

Hi
I have problem in working with pop-up windows and struts.
I have parent page which basically lists some data and has a button for adding new record. when I press that button a child windndow will be opened for data entry. The child window has submit button to save data.
when I press the button for save, It will go to action class and saves it in a database and forwards a new page.
but I do not want to forward any new page. If any exception is raised during database saving, a message should be showed in child window otherwise the child window should close and the parent window should get refreshed.
Can any one write me how we can handle this in struts.
Thanks in Advance,
SR

This has nothing to do with struts, you can do the same with some plain JavaScript. Do the following...
1) On error, forward to a error page
2) On success, forward to a temp.html page.
The code in temp.html would be like this
<html>
<head><script>
window.opener.reload();
self.close();
</script></head>
<body>Closing...</body>
</html>Cheers
-P

I seem to have multiple problems related or unrelated. I cannot use Apple Mail for blueyonder and mostly for gmail as both show that the server is off line. My pop up blocker doesn't work and I am blitzed with pop up windows on nearly every command

Firstly I am unable to use Apple mail except for hotmail, for blueyonder, gmail or Sky as the server shows as (off line) and I have no idea how to get them on line even though I tell them to go there.
My pop up blocker doesn't work and I am blitzed with advertising windows virtually on ever command I make, one seems to be impossible to unsubscribe from.
When I am in an email with a web link the web link doesn't work and I get a window saying that I must have a pop up blocker, but if I switch it off it is no different, what does work is switching the "enable Java script off", then when I get to the web site I can't use it until I switch the java script back on.
I can't do a screen shot either full or partial, when I try it changes the web site that is on screen to another.
So what have I done that might have caused problems, downloading Yosemite seemed to be the start of the problems. Since then I have started to install Mackeeper, after checking with a family members who should know, that MacPaw is safe. I decided that I didn't want to pay the subscription, so went through the uninstall instructions but it comes up as a pop up with considerable regularity.
My stress levels have gone through the roof with pop ups happening so regularly and not being able to use Apple mail.o can anyone help please?
S

Mail troubleshooting - Yosemite
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
SMTP servers keep going offline

Need help big time with pop-up window!

This is probably an easy answer, I'm not a programmer or a back end guy whatsoever, I'm a graphic designer trying to make his way through a project for a client.
I'm working up a Flash template, and I need to make a simple pop up window that will view a more detailed version of an image. The template has a pop up window system where you add your photo to a certain frame of a movie clip. The problem is, the pop ups have scroll bars built in, and for the life of me I couldn't figure out how to get rid of them, so I duplicated one of the movie clips that looked like it housed the framework of the pop up and deleted the scroll bar (I didn't delete any of the scroll bar code because I had no idea what I was doing). It actually kind of worked, but the pop up window is a bit too wide and doesn't look right.
You can view my hack job here...
http://truetilldeathhq.com/main8_v7/main8_v7.html
Stay on the "Print" page and click the first "01" button and an ad for Ford will come up. Click the "Detailed View" button in the description to see the pop up window.
My question is, there MUST be an easier way to make a pop up window than the workaround I'm using with the template. What I'm trying to do is have a pop up for each sample of the work (all images would be the same size) for the first four buttons, and then for the "Online Banners" page, have the pop up open up to the dimensions of the particular banner ad and play the swf. The pop ups shouldn't have scroll bars, only a title and the button to close the window.
To view the template files, you can download them at:
http://truetilldeathhq.com/main8_v7/main8_v7.fla
The "descripton" movie clips have the descriptions and the "Detailed View" links in the frames, and the movie clips I not so gracefully butchered to get the pop up to work were TM_page_content_scroll (where you're supposed to put an image in a certain frame and then put the # of that frame in the Actionscript of the "Detailed View" button), and the TM_main_cont_page2 and TM_pop_up_main3, which were the ones I duplicated.
If ANYONE can offer even the slightest bit of help, I gratefully appreciate it. I've been working on this thing for like 15 hours a day and I can't even think straight at this point, thanks!

I admit to not having read everything you wrote... there's just too much of it. But...
Hashtable (and HashMap, which you should really be using unless you have some external constraint requiring the use of Hashtable) map each key to a single value object.
That is, you can map from the key string "4996" to one single other object. And then you can also map from a different key to a different object.
In you put() method, you add a mapping from "4996" to "good", and then you replace that mapping with one from "4996" to "home". There is only ever one value associated with a given key.
To map multiple values to a single key, you need the value object to be a collection of some kind (or an array). So, you could map your string "4996" to a List, and that list could contain the strings "good", "home", etc.

Problem with pop-up window

Hi all,
i caught up with one issue while using Function-Module POPUP_WITH_TABLE,with this Func-module im able to display all the entries in the pop-up,but if i press the continue button with out selecting any item in the window ,that window does not getting closed.What should i have to do for closing that window even if i press the continue button without selecting any entry of pop-up window.
Thanks in advance,
Regards,
Asmitha.

you cant get that fn ality in POPUP_WITH_TABLE here you have to cross the window and uncomment the exception part for that.
try this fm
data : choice like sy-tabix.
                            CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY_OK'
                              EXPORTING
                                ENDPOS_COL         = 30
                                ENDPOS_ROW         = 30
                                STARTPOS_COL       = 5
                                STARTPOS_ROW       = 5
                                TITLETEXT          = 'chose3'
                             IMPORTING
                               CHOISE             = choice
                              TABLES
                                VALUETAB           = itab
                             EXCEPTIONS
                               BREAK_OFF          = 1
                               OTHERS             = 2
                            IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
                            ENDIF.
regards
shiba dutta

Need help with pop up windows!

I'm working on a page that's very long and it has your basic
"click on a small thumbnail of an image and a larger version opens
up in a pop up window". I downloaded a free extension from the
Macromedia exchange called Open Picture Window Fever, but it has a
couple of problems. First, there's no option to center the pop up
window, only dimensions you can manually put in. Plus when you
click on the picture, the new window opens but the original page
with the thumbnails automatically goes to the top when the pop up
opens (this is a problem because the page is very long and the user
would have to scroll back down each time they clicked on an image,
a big pain). The only other option I have is to use the Dreamweaver
Open Browser Image Behavior. The problems with that is that you
have to make a html page for each image, which is a drag. Also, I
can get the pop up window to center with a different extension I
downloaded, but I still have the same problem with the original
page jumps to the top.
What can I do to fix this? Anybody have other ideas or free
extensions I haven't tried yet?

> Plus when
> you click on the picture, the new window opens but the
original page with
> the
> thumbnails automatically goes to the top when the pop up
opens
Go to PVII and look for a free extension called Fix Null
Links....
http://www.projectseven.com/
That'll take care of that one.
> The only other option I
> have is to use the Dreamweaver Open Browser Image
Behavior.
Go to E. Michael Brandt's site, and examine JustSo Picture
Window. It's
commercial but it's way nicer than PWF, in my opinion....
http://www.valleywebdesigns.com
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"xslamx" <[email protected]> wrote in
message
news:[email protected]...
> I'm working on a page that's very long and it has your
basic "click on a
> small
> thumbnail of an image and a larger version opens up in a
pop up window".
> I
> downloaded a free extension from the Macromedia exchange
called Open
> Picture
> Window Fever, but it has a couple of problems. First,
there's no option
> to
> center the pop up window, only dimensions you can
manually put in. Plus
> when
> you click on the picture, the new window opens but the
original page with
> the
> thumbnails automatically goes to the top when the pop up
opens (this is a
> problem because the page is very long and the user would
have to scroll
> back
> down each time they clicked on an image, a big pain).
The only other
> option I
> have is to use the Dreamweaver Open Browser Image
Behavior. The problems
> with
> that is that you have to make a html page for each
image, which is a drag.
> Also, I can get the pop up window to center with a
different extension I
> downloaded, but I still have the same problem with the
original page jumps
> to
> the top.
>
> What can I do to fix this? Anybody have other ideas or
free extensions I
> haven't tried yet?
>

Strange errors with pop up windows

Hi folks,
I recently had my PC re-imaged. After that when ever I try to click on any link that should result in a pop-up window nothing happens. The system locks up for about 20-30 seconds and then comes back with no result.
I already checked and turned off the pop-up blocker (and oddly enough the logoff function works and other pop-up (non portal) applications work just fine). All other links work, but any link (such as the Personalize) that should result in a pop-up fails.
In some cases I get a JavaScript error that reads...
Line 176 char 1 no such interface supported
com.sap.portal.runtime.system.console.Go
In other cases I don't get any error message at all.
One of my fellow coder's machine continues to work just fine. Pop-ups work without a problem. Our basis folks are at a loss.
Does anyone have any ideas?
Thanks in advance!
-Jon

Thank you Ulli,
That OSS note is most useful. However, it turned out that we had a much more serious issue. The image our basis group was using for our workstations is messed up. Microsoft Article 281679 or Q281679 gives a much better explanation. The short answer was that some of the IE DLLs were corrupt and need to be reinstalled.
Regards, Jon

Working with Pop-Up windows

Hi,
heres my requirement:
To open a pop-up window onclick of a link from the parent window. Parent window has a data-table and a column called 'StatementInfo' which shows the statementNumber as a h:commandLink. When i click on the statement number i want to show the details of that statement in the pop-up. The details are rendered as a dataTable and if i am able to pass this statementNumber then i need to render the dataModel for that statementNumber.
If i have not made myself clear, heres a simpler example;
You have a page where you list all employees in a datatable. the employee id is a commandLink. I want to show the employee details when user clicks this link. Possible if so how and if there are any examples please point me to them.
Has any one done this before? I am using RAD6.0 and jsf1.0.1. I wouldnt want to use any apache component though.
thanks in advance,
Dilip

I dont understand how to do this. If you can point me to some example or provide me with some code assistance wouyld be helpful.
meanwhile here is what i tried:
mainPage.jsp
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@taglib uri="http://www.ibm.com/jsf/html_extended" prefix="hx"%>
<html>
<script type="text/javascript" language="javascript">
function openPopUp(link) {
var winId = window.open("popUp.jsp","window","left=30,top=20,width=800,height=600,resizable=no,scrollbars=1,status:no");
link.onclick();
return false;
</script>
<body>
     <f:view>
     <h:form id="mainPageForm">
          <h:dataTable id="dataTableOne" value="#{pc_mainPage.dataModel}" var="e">
               <h:column id="col1">
                    <f:facet name="header">
                         <h:outputText value="Employee ID" id="empIDHeader"/>
                    </f:facet>
                    <h:commandLink onmousedown="return openPopUp();">
                         <h:outputText value="#{e.employeeID}" />
                    </h:commandLink>
               </h:column>
               <h:column id="col2">
                    <f:facet name="header">
                         <h:outputText value="Employee Sex" id="empSexHeader"/>
                    </f:facet>
                    <h:outputText value="#{e.employeeSex}" />
               </h:column>
          </h:dataTable>
     </h:form>
     </f:view>
</body>
</html>popUp.jsp
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<html>
<body>
     <f:view>
     <h:form id="popUpForm">
          <h:dataTable id="dataTableTwo" value="#{pc_mainPage.dataModelPop}" var="e">
               <h:column id="ncol1">
                    <f:facet name="header">
                         <h:outputText value="Employee ID" id="pempIDHeader"/>
                    </f:facet>
                    <h:outputText value="#{e.employeeID}" />
               </h:column>
               <h:column id="ncol2">
                    <f:facet name="header">
                         <h:outputText value="Employee Sex" id="pempSexHeader"/>
                    </f:facet>
                    <h:outputText value="#{e.employeeSex}" />
               </h:column>
               <h:column id="ncol3">
                    <f:facet name="header">
                         <h:outputText value="Employee Name" id="pempNameHeader"/>
                    </f:facet>
                    <h:outputText value="#{e.employeeName}" />
               </h:column>
               <h:column id="ncol4">
                    <f:facet name="header">
                         <h:outputText value="Employee Age" id="pempAgeHeader"/>
                    </f:facet>
                    <h:outputText value="#{e.employeeName}" />
               </h:column>
          </h:dataTable>
     </h:form>
     </f:view>
</body>
</html>common page code for both.
package pagecode;
import java.util.ArrayList;
import javax.faces.model.DataModel;
import javax.faces.model.ListDataModel;
public class MainPage {
     //Main page data model
     private DataModel dataModel = new ListDataModel();
     //opo-up page data model
     private DataModel dataModelPop = new ListDataModel();
     public DataModel getDataModel() {
          ArrayList list = new ArrayList();
          Employee emp = new Employee();
          emp.setEmployeeAge("23");
          emp.setEmployeeID("200");
          emp.setEmployeeName("DA");
          emp.setEmployeeSex("Male");
          Employee emp1 = new Employee();
          emp1.setEmployeeAge("24");
          emp1.setEmployeeID("300");
          emp1.setEmployeeName("RM");
          emp1.setEmployeeSex("Female");
          Employee emp2 = new Employee();
          emp2.setEmployeeAge("23");
          emp2.setEmployeeID("400");
          emp2.setEmployeeName("JP");
          emp2.setEmployeeSex("Male");
          Employee emp3 = new Employee();
          emp3.setEmployeeAge("22");
          emp3.setEmployeeID("500");
          emp3.setEmployeeName("VT");
          emp3.setEmployeeSex("Male");
          list.add(emp);
          list.add(emp1);
          list.add(emp2);
          list.add(emp3);
          this.dataModel.setWrappedData(list);
          setDataModel(this.dataModel);
          return this.dataModel;
     public void setDataModel(DataModel dataModel) {
          this.dataModel = dataModel;
     public DataModel getDataModelPop() {
          Employee emp = (Employee) this.getDataModel().getRowData();
          ArrayList arrayList = new ArrayList();
          arrayList.add(emp);
          this.dataModelPop.setWrappedData(arrayList);
          return dataModelPop;
     public void setDataModelPop(DataModel dataModelPop) {
          this.dataModelPop = dataModelPop;
}My pop-up page gets the first employee details only. Dunno how to get the ID from the mainPage into the pop-up and use the same to populate it in the pop-up page.
thanks,
Dilip

Question with pop up windows

hi there, i have a page with a few quiz quesitons on it and i
have a link to open up a pop-up box with the answer. however, in
order to use the behaviors panel to make the link, i had to put a
"#" sign into the text of the link. the problem is that i think
this is making the page jump to the very top when the link is
clicked. you can see the page here:
http://www.traceyfern.com/buffalomusic.html
is there another way that i can get the pop-up window to open
as it does yet not have the originating page jump to the top? any
advice would be appreciated.
thanks!
denise

Change your code to this:
<a href="buffaloquiz/question1.html"
onclick="MM_openBrWindow(this.href,'','scrollbars=yes,resizable=yes,width=350,height=450' );return
false">click for answer</a>
That will work, but, having said that, in my opinion opening
a popup
window to see the answer is more than a little ponderous.
Take a look
at my divaFAQ DW Extension, as I really think it would be
better option
for your page.
Here's an example:
http://www.squamscott.org/scc_faq.asp
and here's more about it:
http://www.divahtml.com/products/divaFAQ/toggle_answers.php
E. Michael Brandt
www.divaHTML.com
divaPOP : standards-compliant popup windows
divaGPS : you-are-here menu highlighting
divaFAQ : FAQ pages with pizazz
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

Problems with pop-up windows

Hallo,
I am working with Portal 3.06 and most things work quite fine, except the Pop-Up windows. When I place a pop-up window on a customization form referring a certain dynamic list-of-values and then check it, no pop-up-window appears. The Internet Explorer posts me the Javascript message :
"Object expected" and the Netscape navigator doesn't return anything. When I use a combobox instead using the same list-of-values everything works fine. Could this be a bug in portal? I searched in the oracle-technet and other discussion boards for a solution but so far I didn't find anything. I would be very happy, if someone could help me.
Thanks
Christoph Eggenhofer

This is a known bug and is fixed in coming release.

Endless loop with pop-up window to upgrade Aperture

I have been using iPhoto and it keep updated. Using v.9.4.2. MaxOS is current v.10.7.5. I have tried Aperture but not really used it and don't keep it updated. It is v.2.1.4. Recently I chose a pull-down setting in iPhoto to open photos in Aperture library (or somehting like that, I don't remember, I was just fumbling around). I got a pop-up window stating:
"Aperture library needs to be upgraded.
To open this Aperture library in iPhoto, you need Aperture 3.3 or later.
Click Update Aperture to buy the latest version of Aperture from the Mac App Store.
After installing the update, open your library in Aperture to upgrade it."
The only options on this pop-up window are "Quit" or "Update Aperture".
If I choose "QUIT", iPhoto closes and I can't open the photos in my iPhoto library.
If I choose "Upgrade Aperture" I am re-directed to the APP Store where I can purchase Aperture for $79.99.
I didn't intend to open Aperture and I don't want to upgrade Aperture, either.
I only want to open iPhoto without the Aperture library.
I can't figure out a way to get me back to opening my photos in iPhoto without this pop-up window.
I thought there would be an iPhoto or Aperture preference file ending with ".plist" in iMacHD \ Library \ Preferences. If so, I would delete it and then try to re-launce the iPhoto application. I only found one relating to Aperture. I deleted it and tried re-launching iPhoto and still get the pop-up window asking to upgrade Aperture.
I would like to remove Aperture and use only iPhoto, if I can.

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

Using Pageflow with pop-up windows

Similar Messages

Maybe you are looking for