Using PAP in a VPN ?

Is there any way of using PAP in a IPSec/L2TP VPN?

Similar Messages

Is using PAP with L2TP secure?

We are setting up a new VPN using a ASA5500 that sends authentication requests to an ACS that int turn forwards the authentication a RSA securid server. When using the MS L2TP client the only wat to get it to work is by using PAP. How secure is this? Is the authentication encapsulated in IPSEC? Since we are using sureid tokens if the username and password is sent in cleartext is there a real problem if someone does intercept it?

PAP - Passes cleartext username and password during authentication and is NOT Secure.
Refer this link:
http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008066ebb6.html

Creating a new work item instance in a process using PAPI

I'm seeing that there are a lot of questions on this forum about using Oracle BPM 10g's Java API called PAPI.
I just uploaded a step by step document on how you could do this using JDeveloper 11. Here's the link to this document: http://www.4shared.com/file/126507332/e814a3a8/CallingPapi.html. The Oracle BPM project I used for this step-by-step document is also in this zip file. If you're curious, this also describes how to download, install and start JDeveloper 11.
This is not formal Oracle documentation, but I know from teaching our Oracle BPM Bootcamp class that getting PAPI to work is sometimes a challenge and thought this might help. I tried to write it with the "Java Newbie" in mind so do not panic if you aren't an expert in Java (I'm sure not ?:| ).
This is a simple example that uses most of the logic found in the PAPI documentation on http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/papi/index.html?t=modules/papi/c_Head_PAPI.html in the "Writing Your First Java PAPI Program" section of this document.
The document provides a step-by-step description on how how to use PAPI to:
<li> interface to processes running on an Oracle BPM Enterprise Engine using the same logic that is in the Oracle BPM PAPI documentation
<li> interface to processes running on an Oracle BPM Studio Engine
<li> list processes currently running on the Engine using the same logic that is in the Oracle BPM PAPI documentation
<li> list the work item instances running on the Engine using the same logic that is in the Oracle BPM PAPI documentation
<li> create a new work item instance in a process and pass in input argument variables to the new instance as it is created.
Hope you find this useful,
Dan

Hi
i have gone through your example. It gives good information how to connect to BPM engine through java papi client. I have followed exactly the same steps given in the PDF document. But it throws the exception on both java client side and BPM Suite.
Steps followed :
1. Import sampleproject.exp into Oracle BPM studio and start the BPM engine.
2. Imported the fuegopapi-client.jar and Write the JAVA PIPA client to connect Oracle BPM Engine.
complete example code:_
import fuego.papi.CommunicationException;
import fuego.papi.InstanceInfo;
import fuego.papi.ProcessService;
import fuego.papi.ProcessServiceSession;
import fuego.papi.OperationException;
import java.util.Properties;
public class ProcessAPIClient {
     public static void main(String[] args) {
/////////////////// API Initialization ///////////////////
Properties configuration = new Properties();
configuration.setProperty(ProcessService.DIRECTORY_ID, "default");
configuration.setProperty(ProcessService.DIRECTORY_PROPERTIES_FILE, "directory.xml");
configuration.setProperty(ProcessService.PROJECT_PATH, "C:\\Oracle\\OracleBPMWorkspace\\SampleProject" );
configuration.setProperty(ProcessService.WORKING_FOLDER, "/tmp");
try {
ProcessService processService = ProcessService.create(configuration);
/////////////////// Establish a session ///////////////////
ProcessServiceSession session = processService.createSession("test", "test", null);
/////////////////// Operate with PAPI ///////////////////
for (String processId : session.processesGetIds()) {
System.out.println("\n Process: " + processId);
for (InstanceInfo instance : session.processGetInstances(processId)) {
System.out.println(" -> " + instance.getId());
/////////////////// Close the session ///////////////////
session.close();
/////////////////// Release API Resources ///////////////////
processService.close();
} catch (CommunicationException e) {
System.out.println("Could not connect to Directory Service");
e.printStackTrace();
} catch (OperationException e) {
System.out.println("Could not perform the requested operation");
e.printStackTrace();
It throws the following exception and output on java client._
Could not enhance type with bytecode info: java.lang.NoSuchMethodError: org.apache.bcel.classfile.Method.getArgumentTypes()[Lorg/apache/bcel/generic/Type;
Could not enhance type with bytecode info: java.lang.NoSuchMethodError: org.apache.bcel.classfile.Method.getArgumentTypes()[Lorg/apache/bcel/generic/Type;
Could not enhance type with bytecode info: java.lang.NoSuchMethodError: org.apache.bcel.classfile.Method.getArgumentTypes()[Lorg/apache/bcel/generic/Type;
Could not enhance type with bytecode info: java.lang.NoSuchMethodError: org.apache.bcel.classfile.Method.getArgumentTypes()[Lorg/apache/bcel/generic/Type;
Could not enhance type with bytecode info: java.lang.NoSuchMethodError: org.apache.bcel.classfile.Method.getArgumentTypes()[Lorg/apache/bcel/generic/Type;
Could not enhance type with bytecode info: java.lang.NoSuchMethodError: org.apache.bcel.classfile.Method.getArgumentTypes()[Lorg/apache/bcel/generic/Type;
Could not enhance type with bytecode info: java.lang.NoSuchMethodError: org.apache.bcel.classfile.Method.getArgumentTypes()[Lorg/apache/bcel/generic/Type;
Could not enhance type with bytecode info: java.lang.NoSuchMethodError: org.apache.bcel.classfile.Method.getArgumentTypes()[Lorg/apache/bcel/generic/Type;
Could not enhance type with bytecode info: java.lang.NoSuchMethodError: org.apache.bcel.classfile.Method.getArgumentTypes()[Lorg/apache/bcel/generic/Type;
Creating ProcessService with id 'SampleProject'.
Local folder /tmp\system\Schema33871921573571055\catalogs found.
Loading catalogs from local folder: /tmp\system\Schema33871921573571055\catalogs
0 jars found locally.
[CatalogMgrCache] =======================
Registering CatalogMgr [SampleProject] ...CatalogManagerCache 23240993:
Managers:
Counters:
[CatalogMgrCache] =======================
CatalogMgr [SampleProject] REGISTERED!CatalogManagerCache 23240993:
Managers:
{SampleProject=fuego.util.LocalCatalogManager@40b187}
Counters:
ProcessService 'SampleProject' created successfully.
Process: /SampleProcess#Default-1.0
Unreachable Engine Tolerance (seconds):
by default: 0
to be used: 0
This papi client will not cache exceptions which imply that an engine could not be reached.
Exception in thread "main" java.lang.NoClassDefFoundError: javax/jms/MessageEOFException
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:169)
     at $Proxy24.<clinit>(Unknown Source)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at fuego.papi.impl.AbstractProcessControlHandler.newProxyInstance(AbstractProcessControlHandler.java:52)
     at fuego.papi.impl.rmi.RMIProcessControlHandler.createProxy(RMIProcessControlHandler.java:47)
     at fuego.papi.impl.rmi.RMIEngineAccessImpl.createProcessControl(RMIEngineAccessImpl.java:111)
     at fuego.papi.impl.ProcessServiceImpl.createProcessControl(ProcessServiceImpl.java:1082)
     at fuego.papi.impl.ProcessServiceSessionImpl$1.run(ProcessServiceSessionImpl.java:2698)
     at fuego.papi.impl.ProcessServiceImpl.executeEngineOp(ProcessServiceImpl.java:1675)
     at fuego.papi.impl.ProcessServiceSessionImpl.getProcessControl(ProcessServiceSessionImpl.java:2703)
     at fuego.papi.impl.ProcessServiceSessionImpl.processGetInstances(ProcessServiceSessionImpl.java:2365)
     at com.eds.comet.bpm.oracle.papi.client.ProcessAPIClient.main(ProcessAPIClient.java:30)
Caused by: java.lang.ClassNotFoundException: javax.jms.MessageEOFException
     at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
     ... 16 more
It throws the following exception and output on Oracle BPM Suite._
Client 'Id=test, Name=test, In=1, Session=564242434' was not found in lists ', PARTICIPANTS' while disconnecting it.
Please help me to resolve this. I noticed it is able to connect BPM engine and retrieve process list. But while getting instances, it throws the exceptions on both Java Client and BPM engine side.
Thanks and Regards
Mahesh

Error while connecting using Papi

Hi All
I facing some issue while connecting to ALBPM Studio 6.x using PAPI.
Exception is as follows
java.lang.NoClassDefFoundError: fuego/papi/exception/NoPermissionException
     at pageflows.bpmRedirect.TestController.begin(TestController.java:67)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:878)
     at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:808)
     at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:477)
     at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:305)
     at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:335)
     at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:51)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:419)
I am calling an external servlet(controller) on click of an interactive activity.
e.g
Let my process Test is waiting at an interactive activity 'A' which on executing calls an external resource say 'TestController'. For this I had created a 'Server Configuration' in external resources and selected this configuration in Interactive Activity 'A'.
On the 'TestController' when I able to fetch instanceId, activity name, but when I try to create Papi session I am getting exception mentioned above
Code used for creating session is as follows
Properties prop = new Properties();
prop.setProperty(ProcessService.DIRECTORY_ID,"default");
prop.setProperty(ProcessService.PROJECT_PATH,"D:/ALBPM6_Workspace/Testing");
ProcessService processService;
ProcessServiceSession bpmSession = null;
try {
     processService = ProcessService.create(prop); //Exception at this line
     try {
          bpmSession = processService.createSession("test","test","localhost");
          } catch (OperationException e) {
          e.printStackTrace();
} catch (CommunicationException e) {
     e.printStackTrace();
Also when I run the above mentioned code by just creating a simple java program using main() it runs successfully.
Please help me in this regard
Thanks

This is resolved it was the jar issue.
Thanks

Using PAPI in a Web Service

I am using Java PAPI code in my Web Service.. I have imported the fuegopapi-client jar in my project. I compile the program, I create a WSDL and deploy it to a server .But I get an exception when I run it. I get the following exception:-
java.lang.reflect.InvocationTargetException.
Does anybody know why is this exception..
The same program works well with the Java PAPI code inside of a simple Java app, but gives this error in a web app.

Yes, I could use PAPI -WS.. But directly using PAPI-WS exposes all methods inside PAPI-WS.. Or else I have to use the following code inside my web service to call only one method i.e. processCreateInstance and I think I wud get the same exception because of the JAR :-
import java.net.MalformedURLException;
import java.rmi.RemoteException;
import javax.xml.rpc.ServiceException;
import com.bea.albpm.PapiWebService.OperationException;
public class CreateInstances {
public static void main(String[] args) throws MalformedURLException, ServiceException, OperationException, RemoteException {
java.net.URL url = null;
org.apache.axis.EngineConfiguration config = null;
com.bea.albpm.PapiWebService.PapiWebServicePortBindingStub binding = null;
com.bea.albpm.PapiWebService.InstanceInfoBean value = null;
//String processId = "/Proceso1";
//String processId = "/ActividadesExternas";
String processId = "/PAPIWS";
String argumentsSetName = "BeginIn";
//Binding
//url = new java.net.URL("http", "localhost", 8686, "/papiws/PapiWebServiceEndpoint");
url = new java.net.URL("http", "localhost", 8585, "/papiws/PapiWebServiceEndpoint");
config = new org.apache.axis.configuration.FileProvider("client_deploy.wsdd");
binding = (com.bea.albpm.PapiWebService.PapiWebServicePortBindingStub) new com.bea.albpm.PapiWebService.PapiWebService_ServiceLocator(config).getPapiWebServicePort(url);
binding.setTimeout(60000);
//Arguments
com.bea.albpm.PapiWebService.ArgumentsBeanArgumentsEntry argumentsBeanArgumentsEntry[] = new com.bea.albpm.PapiWebService.ArgumentsBeanArgumentsEntry[1];
argumentsBeanArgumentsEntry[0] = new com.bea.albpm.PapiWebService.ArgumentsBeanArgumentsEntry();
argumentsBeanArgumentsEntry[0].setKey("entradaArg");
argumentsBeanArgumentsEntry[0].setValue("Instancia creada de forma externa mediante PAPI-WS 2.0");
com.bea.albpm.PapiWebService.ArgumentsBean argumentsBean = new com.bea.albpm.PapiWebService.ArgumentsBean(argumentsBeanArgumentsEntry);
com.bea.albpm.PapiWebService.holders.ArgumentsBeanHolder argumentsBeanHolder = new com.bea.albpm.PapiWebService.holders.ArgumentsBeanHolder(argumentsBean);
//Create instance
value = binding.processCreateInstance(processId, argumentsSetName, argumentsBeanHolder);
System.out.println("Created instance -> InstanceInfo.id = " + value.getId());
I found this code in the forum, but I also do not know where is this JAR?
com.bea.albpm.PapiWebService.OperationException
Edited by: user8752903 on Sep 2, 2009 7:11 AM

How to Increase the retreving size of instances using PAPI filters.

Hi,
How to Increase the retreving size of instances using PAPI filters.
In my engine database instance size exceeds 2500 then we are getting following exception.
If we login in to user workspace able to see the instances but while trying to retrieve from PAPI getting below exception and showing the user's inbox aize as 0.
In Process Admin console we set all the required parameters.
Still I m getting the same problem.
Can you please lgive mev the solution.
<Mar 23, 2010 8:58:24 PM SGT> <Warning> <RMI> <BEA-080003> <RuntimeException thrown by rmi server: fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl.getInstancesByFilter(Lfuego.papi.impl.j2ee.EJBSecureEngineInfo;Ljava.lang.String;Lfuego.papi.Filter;)
java.lang.ClassCastException: cannot assign instance of java.util.HashSet to field fuego.view.FilterImpl.attributes of type java.util.List in instance of fuego.view.FilterImpl.
java.lang.ClassCastException: cannot assign instance of java.util.HashSet to field fuego.view.FilterImpl.attributes of type java.util.List in instance of fuego.view.FilterImpl
     at java.io.ObjectStreamClass$FieldReflector.setObjFieldValues(ObjectStreamClass.java:2032)
     at java.io.ObjectStreamClass.setObjFieldValues(ObjectStreamClass.java:1212)
     at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1953)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1871)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
Regards,
Bharath.
Edited by: bg57295 on Mar 24, 2010 6:45 PM

Hi Bharath,
Believe me, you have an incompatibility between different build#.
PAPI has an instance cache. When certain process has more instances than the maximum specified, the cache is switch to status OPEN. That means, that PAPI will not be able to resolve some instance queries using the information in the cache. When that occurs, PAPI forward all those queries to the engine.
The incompatibility introduced is in the communication between PAPI and Engine. So, you only get the exception when you have more instances than the maximum cache size.
Regards,
Ariel

Retrieving user created variables from multiple instances using PAPI-WS

Hi,
I'm using PAPI-WS to retrieve a list of instances from Oracle BPM 10.3.1.0.0 using ProcessGetInstance. These are modeled as external tasks. ProcessGetInstance returns an InstanceInfoBean which has no place for user defined variables that were set when the instances were started.
The only way to get user defined variables seems to be to iterate through the entire list and send an InstanceGetVariable request for each one. InstanceGetVariable does not seem allow more than one instance id to be specified in a call from my testing. This is very inefficient since we could easily have hundreds of instances that we're trying to display. Is there some way to get the list of instances to include the user defined variables, or to get the user defined variables for more than one instance in a single call?
Thanks,
Steve

I can't reproduce the problem. This is what I see:C:\temp>javac -cp . Ttest.java
C:\temp>java -version
java version "1.6.0"
Java(TM) SE Runtime Environment (build 1.6.0-b105)
Java HotSpot(TM) Client VM (build 1.6.0-b105, mixed mode, sharing)
C:\temp>java -cp . Ttest
1
3
3

Problem using PAPI-WS for external process notifcation

Hello,
I'm trying to have an external Java application send a process notification using PAPI-WS.
I have a process instance currently sitting at a notifcation wait step (configured to wait for an external notification) but each time I call processSendNotification I get the an unspported operation exception. I'm not even sure this is the correct ws operation to use but looking at the PAPI API reference it seemed the most likely.
Below is a snippet from the code I'm testing this with and the corresponding output including the exception:
for (InstanceInfoBean instance : instances.getInstances())
String waitStep = "WaitForDelivery";
System.out.println("-> process id = " + instance.getId());
// find which instance are waiting on delivery
if (waitStep.equals(instance.getActivityName()))
System.out.println(" -> " + instance.getAuthor() + " is waiting on delivery!");
papiWebServicePort.processSendNotification(instance.getId(), waitStep, null, null);
Process: WhatToHave
-> process id = /WhatToHave#Default-1.0/2/0
-> process id = /WhatToHave#Default-1.0/1/0
-> Andy is waiting on delivery!
Could not perform the requested operation
stubs.OperationException_Exception: The BEA AquaLogic® BPM Engine version does not support the required operation.Please ask BEA AquaLogic® BPM Administrator for assistance.
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
     at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:127)
     at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:254)
     at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:224)
     at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:117)
     at $Proxy31.processSendNotification(Unknown Source)
I'm doing this all using BPM Studio 6.0.2 (build 85749) on Linux.
Any help or pointers greatly appreciated,
Thanks,
Mike

Hello,
I'm trying to have an external Java application send a process notification using PAPI-WS.
I have a process instance currently sitting at a notifcation wait step (configured to wait for an external notification) but each time I call processSendNotification I get the an unspported operation exception. I'm not even sure this is the correct ws operation to use but looking at the PAPI API reference it seemed the most likely.
Below is a snippet from the code I'm testing this with and the corresponding output including the exception:
for (InstanceInfoBean instance : instances.getInstances())
String waitStep = "WaitForDelivery";
System.out.println("-> process id = " + instance.getId());
// find which instance are waiting on delivery
if (waitStep.equals(instance.getActivityName()))
System.out.println(" -> " + instance.getAuthor() + " is waiting on delivery!");
papiWebServicePort.processSendNotification(instance.getId(), waitStep, null, null);
Process: WhatToHave
-> process id = /WhatToHave#Default-1.0/2/0
-> process id = /WhatToHave#Default-1.0/1/0
-> Andy is waiting on delivery!
Could not perform the requested operation
stubs.OperationException_Exception: The BEA AquaLogic® BPM Engine version does not support the required operation.Please ask BEA AquaLogic® BPM Administrator for assistance.
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
     at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:127)
     at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:254)
     at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:224)
     at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:117)
     at $Proxy31.processSendNotification(Unknown Source)
I'm doing this all using BPM Studio 6.0.2 (build 85749) on Linux.
Any help or pointers greatly appreciated,
Thanks,
Mike

Javascript errors using Checkpoint Mobile Access VPN: Workaround needed

Hi,
We are currently in the process of upgrading from APEX 3.2 to 4.2.1 at our organization. We are done with fixing all applications and tests have been successful so far.
However we are facing one issue when we use applications by passing through a web proxy called Checkpoint Mobile Access VPN. The issue never occured in APEX 3.2 when using this proxy.
Before explaining the issue here is a quick description of how this proxy works. I first authenticate through the proxy's login page. Once authenticated, there is a list of shortcuts I can choose to access our Portal.
From the portal, I then have links to my APEX applications (APEX authentication is done with Oracle Single-sign-on).
The proxy modifies all URLs to something like this:
https://my-proxy-host/axess/Web/pls/apex/f,CVPNHost=my-apex-host,CVPNProtocol=http,CVPNOrg=rel?p=10001:101:2345777452066514
It also modifies HTML content and javascript libraries in order to work with its translated URLs (and maybe for some other reasons which I don't know). In javascript files, it replaces some functions and variables with some of its own.
Now here is the issue. This javascript rewriting causes a syntax error to occur in desktop_all.min.js , more precisely in the code that concerns apex.security . This causes all apex and jquery functions to break.
To investigate deeper, I removed the #APEX_JAVASCRIPT# placeholder in a template and included one by one all the uncompressed libraries that are used by desktop_all.min.js .
This resolved the issue.
After this I tried to include again all the same libraries but in their minified version. I then got the issue back. After searching a bit I realized that the issue is located in security.min.js .
The minified version of the library has a syntax error but the uncompressed version works well.
I analyzed the syntax error and it's caused by the proxy that closes a parenthesis at the wrong place. I've never had this kind of javascript rewriting issue before but the proxy software definitely failed in this case.
I understand that the error is caused by the proxy software and has nothing to do with APEX. However I need to put a workaround in place since we have no choice of using the proxy in many situations.
-Does anyone here ever got or heard about this issue? If yes, did you find a workaround?
-I may have found my own workaround and would like to know your opinion on it:
I took the uncompressed security.js file and minified it with a tool found on internet. The result code is different from the one bundled with APEX.
I then refered to this new file in my template and had no error this time.
What I finally did is edit desktop_all.min.js and replace the line concerning apex.security with my new file. It seems to work quite well.
I know it's not a good approach to overwrite files provided by APEX like this but I would prefer this than including all the dozens of files.
I would like to keep #APEX_JAVASCRIPT# so APEX continues controlling which libraries to include.
What do you think about this? Maybe is there something similar that would be a better approach?
Thanks in advance

Hello
I have similar problem - difference is just in using PPTP instead of VPN client but basicaly it is the same setup.
Simply ip local policy doesn't work when you have some encrypted traffic.
Can you post your configuration for the internet-redirect-rmap route map.
I have tried with match gre protocols and ports 1723 for pptp but it simply doesn't work so I am wondering is this even feasible on cisco router.
Dusan

Can I get the participants of the role of some activity using PAPI?

Hi all,
Can I get all participants who have the role of one activity using PAPI? how?
thanks and regards.

Hello,
I have the same problem, how to get the participants of specific role using PAPI ?
Thanks

How to terminate Correlation using Papi Call in Java

Hi ,
I have process processP1 in which there is a automatic activity A1, within this activity I am creating a correlation with the combination of customer_id and loan_id.
Correlation.initiate(name : CORRELATION_NAME, values : { customer_id, loan_id });
After that, there is a subprocess processP2, after the instance is prcessed completely in processP2, I have another automatic activity A2 in processP1 , I am terminating the correlation .
Correlation.terminate(name :CORRELATION_NAME)
One issue which I am facing is there is a instance for which a correlation was created, it failed in processP2 and was aborted. This particular instance never went to A2 the correlation was not terminated.
Whenever the same combination of customer_id and loan_id is getting created, it is showing as duplicate entry.
Is there a way to clear / terminate that particular correlation? Can It be done using Papi ?
Any suggestions / advice would help.
Thanks,

Sreekant wrote:
Hi ,
I have process processP1 in which there is a automatic activity A1, within this activity I am creating a correlation with the combination of customer_id and loan_id.
Correlation.initiate(name : CORRELATION_NAME, values : { customer_id, loan_id });
After that, there is a subprocess processP2, after the instance is prcessed completely in processP2, I have another automatic activity A2 in processP1 , I am terminating the correlation .
Correlation.terminate(name :CORRELATION_NAME)
One issue which I am facing is there is a instance for which a correlation was created, it failed in processP2 and was aborted. This particular instance never went to A2 the correlation was not terminated.
Whenever the same combination of customer_id and loan_id is getting created, it is showing as duplicate entry.
Is there a way to clear / terminate that particular correlation? Can It be done using Papi ?1. Get the instances by using the below method. the below method is avliable in the ProcessServiceSession calss.
InstanceInfo processGetInstanceByCorrelation(String processId,
String correlationName,
Object[] correlationValues)
throws OperationException
2. Notiy these instances using the method. the below method is avliable in the ProcessServiceSession calss
processSendNotification(String targetInstanceOrProcessId,
String activityName,
String targetArgumentsSetName,
Arguments notification)
throws OperationException
>
Any suggestions / advice would help.
Thanks,Hope this helps
Narasimha

Using PAPI to create instance on Enterpise

Hi.
I have deployed my process on Enterprise edition with weblogic and oracle.
I need to know all the libraries required for writing PAPI program to create instance.
Also anything i should take care of while writing the java program to create instance using PAPI.
Like. do i need to have weblogic.jar in the classpath. or any other jars.
Regards
Right Chord

Thanks,
Maybe I didn't explain exactly what I was expecting with the standby database, these steps are what I did, to resolve the issue
ENABLE THE STANDBY DATABASE TO STARTUP FROM SPFILE
Step 1: create a newly spfile from the current pfile
SQL> CREATE SPFILE='C:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\SPFILEORCL.ORA' FROM PFILE='C:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\INITORCL.ORA';
Step 2: Rename the INITORCL.ORA TO SAVE_DATE_INITORCL.ORA
Example: the C:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\INITORCL.ORA became
C:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\SAVE_24072007_INITORCL.ORA
Step 3: delete the former sid created
C:\ORADIM -delete -sid orcl
Instance deleted.
Step 3: Change the Oracle service to start when the OS start
C:\ ORADIM -new -sid ORCL -SRVC OracleServiceORCL -STARTMODE auto -SRVCSTART system -SPFILE
Instance created.
Now When I shutdown the whole system and start it up, the standby database startup. the only thing is that the standby database startup a read-only mode, defautl with oracle 10g this is fine for me, because the MRP is stopped but the log shipping is not stopped.
So eventhough the system admin shutdown the database server at OS level without letting me know, tha standby should continue receiving archived log files.
I'll just need to monitore the lop apply process and start it to apply archived log files received
Thanks

How to notify a Notification Wait activity using PAPI

I am trying to use Papi code to release an instance waiting in the notification wait activity of a process deployed in the enterprise server .... for this I am running the papi code from main method of a java class running in eclipse using the notify.send(........) method ........but when the code hits the notify.send(.......) method it is giving the following error :
Exception in thread "main" java.lang.IllegalStateException: The component must be invoked on a server-side method.
     at fuego.components.ProcessInstance.getCurrent(ProcessInstance.java:590)
     at fuego.components.Notification.send(Notification.java:229)
     at PapiCode.main(PapiCode.java:61
Can someone point out the error and how to resolve it ??

Hi,
I am a little confused with the package name of the classes and components you are invoking. If you are using the Client API PAPI, then the package name should be fuego.papi.*.
I think you are using the internal components that should be used within a process implementation that assume running in the context of the Engine instead of a pure client application.
Unless I am interpreting this incorrectly, you should use a client Java Application using PAPI to connect to a deployed process into an OBPM Engine.
I would recommend you take a look at the very good introduction document that talks about PAPI, explains how to compile a program and also talks about how to write your first PAPI program client. It will also outline all the needed jar files need to include from a client application perspective. The link is: http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/papi/index.html.
You may alternatively like to check the main Oracle BPM 10gR3 Documentation page through this link: http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/index.html
HTH,
eduardoc.

Using Papi for Filter Activity

Help,
I need help for get name ativities.
I think in use PAPI for it, but I don't sucess.
I need to see where this activity to stop, passing a correlation.
someone has any idea ?
Thanks
Marcelo

learned how to do:
code :
BusinessProcess bp;
ProcessService p;
Fuego.Instance[] res;
Fuego.Papi.InstanceFilter f;
String processName;
bp = BusinessProcess();
f = InstanceFilter();
processName = "myprocessid";
bp.connectTo(url : Fuego.Server.directoryURL, user : "xx", password : "xx", process : processName);
f.create(processService : bp.processService);
f.searchScope = SearchScope(participantScope : ParticipantScope.ALL, statusScope : StatusScope.ALL);
f.addAttributeTo(variable : VarDefinition.ACTIVITY_ID, comparator : Comparison.IS_NOT,
value : "xxxx");
f.addAttributeTo(variable : VarDefinition.ACTIVITY_ID, comparator : Comparison.NOT_CONTAINS,
value : "xxxx");
res = bp.getInstancesByFilter(filter : f);
foreach (inst in res) {
activity = inst.activityName;
bp.disconnectFrom();
}

Global Activity to use while using PAPI

Hi,
I want to create an instance by adding PAPI code to a web-service or by exposing my process as a web-service. Which Global Activity do we use while creating an instance using PAPI ? Is it Global Automatic or Global Creation?

Hi,
You can create a new work item instance in a process using (1) PAPI (the Java API) or (2) PAPI-WS (the web service API) or (3) the process specific web service running on the Engine's port 9000. When you do this, the work item instance goes directly into the Begin activity of the process. Once there the work item instance is created and is automatically routed to the first activity in the process.
There are many reasons for using Global Interactive and Global Automatic activities in a process but you do not need to use a Global Interactive or Global Automatic activity when creating instances using any of these 3 APIs.
Once an instance is created using any of these 3 APIs, the work item instance immediately and automatically flows to the next activity in the process downstream of the Begin activity.
Dan

Using PAP in a VPN ?

Similar Messages

Maybe you are looking for